DVI to ??? adapter for this TV

I have a pre unibody macbook pro with a dvi port.
I want to buy this TV: http://www.argos.co.uk/static/Product/partNumber/5295470.htm
but i dont know what kind of adapter to buy for my macbook to connect to this TV
if anyone could advise me please
thanks

Check YouTube's "How To" Macbook Pro connecting to tv tutorials. The tutorials will tell you all the equipment you will need.

Similar Messages

  • Can I plug in my 110v iPad second gen. charger into 220v charger. I have an adapter for this outlet. Thanks!

    Can I plug in my 110v iPad second gen. charger into 220v charger. I have an adapter for this outlet. Thanks!

    FOr this and anything, read the fine print on the charger. It should say that it takes an input of 100 - 240v. That means all it needs is an adapter. If it doesn't have that number range then don't plug it in. (like stedman says, official apple chargers are rated for world wide power)

  • DVI-HDMI Adapter for hooking up a HDTV...Few problems...

    I have a spare 32" Sharp HDTV with HDMI, so I placed this next to my Mac Pro and used a DVI-HDMI adapter. Here are the problems:
    With my standard GeForce 7300 GT you cannot use both connectors, as they are too close together - so I could not even test to see whether both DVI outputs can work at the same time. So I have to disconnect my 23" cinema display. Now, the Macpro recognizes the TV - in the display preferences - but the resolutions are not good - the only one that works is 1280x720. Other resolutions listed, ie, 1344x756 and higher are listed as interlaced and all cause flicker. This means I do not see the OSX top menus.
    I wish to be able to show clients samples of edited movie clips on a HDTV both in FCP and standalone QT. I doubt that appleTV is the answer, as this only works in iTunes - plus, my Mac is next to my TV anyway.
    Any thoughts on making this work better? I am trying to not have to buy a new video card. Maybe the Black Magic Intensity card for HDMI output is the answer?

    I can live with the lower resolution - the TV is actually 1366 x 768, but the most annoying is not being able to use both DVD connectors on the card at the same time - they are too close together, how stupid is that?
    Ideally, I would like to see both the cinema display and the HDTV running at the same time - or least not having to manually switch over the adapter at the rear.
    I see no way around this, unless I change video cards but for $250 I can get the Black Magic HDMI card which outputs DV via HDMI to HDMI.

  • What is the correct power adapter for this PowerBook G4 Titanium?

    It's a first generation 15" Titanium PowerBook G4 Model #: M5884 - It's rated 28Vdc-1.607A Max
    I have 2 choices for replacement adapters - 45W DC24V 1.875A, or 65W DC24V 2.65A.
    I have found numerous conflicting sites for each adapter and just need to know which is correct.
    Any help would be greatly appreciated.

    I use a much older version of this.
    http://www.igo.com/Laptop-and-Netbook-Chargers/Netbook-Travel-Charger/invt/ps001 280004
    It works great and can power pore than just your laptop. The one that I have powers a phone at the same time and works anywhere.

  • Using Apple Dvi-Composite adapter for playing S-video/Composite video on...

    I was wondering if anyone has tried to use the DVI-Composite/S-Video adapter and instead of attaching it to a laptop, attached the DVI part to a monitor and then used composite/s-video out from a DVD/VCR player and hooked it up to the monitor direct? I have a 24" monitor that I was hoping to attach a DVD/VCR to and turn it into a tv.
    <Post Relocated by Moderator>

    Welcome to Apple Discussions!
    I have requested a moderator move your post to a more appropriate forum.
    Please read the heading post of the forum before posting in the future:
    How to Post a new Topic.

  • HT1665 I have bought the universal docking station to use with my iphone 5 but I can't see an adapter for it, do you have an adapter for this?

    Can I use my universal docking station with my iphone 5?

    Warranty and support is only valid in the country of origin.  The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
    Warranty is determined by device (serial number), no documentation required.
    Apple does not repair devices, they replace them.  For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

  • Recycling my 2G headphoen remote?  Any adapter for this?

    I love my 2G headphone remote. Would prefer using it than buying the new Griffin one with a FM receiver.
    Anyone knows if there is an adapter that would allow me to connect the remote to the dock connector of the 5G iPod?
    Thanks
    iPod 5G 30Gb   Mac OS X (10.4.3)  

    If you accidentally turned off the power during the update installation you have probablycorrupted the firmware installation.
    Assuming the update failed not hardware, then by using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • Wrong 'mini dvi to video' adapter for my 12" Powerbook 1.33

    I recently bought the M9319 mini dvi - video adapter for my 12" Powerbook 1.33 to find that the mini dvi on the adapter is a different size to the one on the computer and the adapters supplied with the computer.
    I've been doing a bit of research into this and it seems a bit of a grey area. Apple have not made it clear in advertising this product that it is only suitable for the newest 12" Powerbooks and even state that it will work with a 1.33 machine in their following article:
    http://docs.info.apple.com/article.html?artnum=86507
    Has anyone had a similar experience, or suggest an alternative product that will work? Did Apple make an older version that works with the 1.33?
    Any help would be much appreciated. Thanks, Graeme.

    Just took the adapter to my local Apple store and they identified it as a mini VGA to video adapter - not what it said on the packaging!
    I've noticed a few posts with this problem, so just double check before you leave the store that the packaging matches the product.

  • Adapter for iMac 27" as display for virgin media V+ HD box?

    Hi, I'd like to connect a virgin media V+ HD box  box to my 27" iMac [3.06 GHz Intel Core 2 Duo, late 2009]
    The virgin media V+ HD box provides both dvi and hdmi outputs.
    iMac 27" manual states: supports input from external DisplayPort sources (requires cables and adapters, sold separately).
    Can anyone recommend an adapter for this purpose?
    Ideally, the adapter would carry audio as well as picture and Target Display Mode (shift-F2?) would flip between the two.
    Thanks,

    Wht are you trying to do? It sounds like the goal is to watch TV or other video that comes in on the Virgin box and use the iMac as a display. If that is the case please visit www.elgato.com, they supply various devices that can fulfil that need.

  • Travel Adapter for 130W T530

    Hello,
    I have a T530, and I'm stuck for what I need to do to get a travel (airplane+car cigarette lighter+AC) power adapter for this system.  It has the enhanced graphics, so I use the 130W adapter.
    I have the 90W travel adapter from my T500, and I tried connecting it with Power Manager set to "airplane seat power mode" so that it wouldn't blow any fuses and will reduce its power draw.  However, when I connect the 90W adapter, it runs off battery anyway and hover over Power Manager shows a tooltip saying that "this adapter does not provide enough power".  So, I disconnected, turned off Airplane Seat Mode, and reconnected, and it did run for a few seconds but sure enough blew the 3A fuse in my car.
    So, two questions:
    1) Anyone know where I can find a 130W+ travel poewr adapter?  I want to have 130W when I'm on AC mains, and the option to use DC power, without having to carry two separate bricks.  So I need the 130W equivalent of the old travel adapter.  I don't even see a 3rd party option like iGo at this wattage.
    2) Anyone know how to get a 130W T530 to stop blowing fuses?  If I have 3A@12V, that is up to 36W available.  I noitice right now while disconnected from a charger that my laptop is pulling 1.4A @ 11.57V from the battery = 16W, so it should definitely be possible to run off of my car's cigarette lighter without blowing the fuse.  I was hoping the "airplane seat mode" setting would do the trick... but apparently not.
    One note... hardwiring an AC inverter to the battery/alternator with an 11A fuse is not an option for me since I am always in a rental car when using my laptop.

    I have a 15A fuse for all 3 cigarette lighter outlets together.  My 2-way splitter in one of them has a 3A fuse in each leg, which I am holding, that is now blown after  my experiment.  Be that as it may, my question is whether there exists a travel power adapter that is capable of outputting 130W when connected to AC mains and also running at any wattage (maybe 130W or lower) when connected to car DC power.  Can anyone help with that?

  • Need AC adapter for Satellite A30-614 / Part Number: PSA30E-1Q8EE

    Hi,
    I want to buy power adapter for this below given information model laptop. I couldnt find the adapter on website as this model is not in use anymore. I need a help, so where can i buy.
    I dont even have the adapter information. Please let me know. If anyone know about this model please give me the information to [email protected]

    This adapter is for the Sat A30.
    *PARTNUMBER:* PA3290U-1ACA
    *Specs:* AC Adapter 100-240V AC 50-60Hz 120W with 19V DC Output
    I dont know from which country you are but you can find this AC-Adaptor on ebay. You can also buy this AC Adaptor at a Toshiba ASP.

  • Dead power adapter for modem hg612.

    I am trying to find out how to get a new power adapter for this modem. I have had it for 20 months and it suddenly died. I spoke to bt help in India but I couldnt get them to understand what I needed. It didnt seem to be on their pages that they go through. Anyway they said that an engineer would come out to look at it.  This was saturday morning past and the engineer wont be here til thursday.  I would have thought there was somebody I could contact to get an new psu posted out without expensive engineer visits.
    I know its the psu thats failed because I replaced it temporarily with one from my photoalbum and it works fine.
    many thanks for any help you can offer

    The PSU and Modem belong to Openreach. They don't have a stores or delivery process to just send kit out. They'll want to replace the whole kit and there for an engineer visit is required.
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How to create custom adapter for plugin

    we have class library file, which gives the different format of data set result depending on the input. We wand to create the custom adapter for this to get data from class library. Please help me.

    Hi,
    Writing perfect custom adapter is not an easy task because you will have to take care of many things.
    So, I believe you should think of some workaround(any other way) to meet your requirement. Like writing pipeline component, receiving input in streams or any other technique.
    In case you want to write custom adapter refer below links-
     Developing Custom Adapters
    Developing Adapters using the BizTalk Adapter Framework
    Tips :In Biztalk Building Custom Adapter
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Need advice on a car adapter for SGPT112US/S

    I'm really surprised to think that Sony hasn't provided a USB adapter for this tablet.  Seems a simple thing to do, in view of the fact that it is so basic and a NECESSITY!   Please provide me with the specs (like voltage output requirements) so I can buy an aftermarket one.  It appears that the 5v USB output on my computer is insufficient to do the job either.  I saw that an inverter for the ac adapter was mentioned, but I think thats not what I would want. 

    I find it interesting that Sony would offer a mobile device dependent solely on household current.  No, I think the word rediculous is more appropriate.  So,  I can use the GPS on the road, as long as the drive is no longer than 8 hours, or less, based on the fact that the battery really won't last as long as it was stated in the marketing literature.  Come on Sony!  All the development costs to build the tablet, then get chintzy on such a cheap thing to make.  At least tell me what the input voltage should be so I can buy something compatible.   This is BS

  • Memory stic pro duo and adapter for cybershot dsc p200

    I boought a memory stick pro duo 2 gb and adapter for my cybershot  dsc p200 camera and when installed it reads no memory stick .

    Hi BigDawg,
    Welcome to the Sony Community!
    When you inserted the card in the camera, did you try to format it? Does this happen with other cards or just this one? And may I also ask the model of the adapter you're using?
    If you've tried to format the card and still get the same message, we recommend checking both the port and the card adapter for any dirt or debris. If this doesn't happen with other cards, the card or adapter that you're using may be defective.The dedicated adapter for this card is the MSAC-M2.
    If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch
     

Maybe you are looking for