Dvi to FW/USB adapter?

adding an apple display to your macbook pro adds 2 fw400 ports and 2 usb ports. is there an adpter of sorts that lets you access these port capabilities without the display?

Here: http://www.apple.com/displays/specs.html
I hope that link helps shed some light.

Similar Messages

Connection constantly dropping with edimax ew-7612uan USB adapter

Hi there,
I have just installed a newly purchased edimax ew-7612uan USB wireless adapter, the problem that I'm getting is that the connection works fine on boot however it keeps dropping very frequently.
This can be reset by running netctl restart my-network. which is a temporary fix but I can't keep on doing this every 5 minutes or so when the connection drops.
I don't think there is a problem with the USB adapter as it appears to work fine in windows (I don't work fine with windows though!).
The same problem has happened on both of my Arch computers... I don't use any other distributions so I don't know if this is an arch specific problem or a general Linux problem. It also happens when using the live disk.
The old adapter is still installed in the box but once I can get this one working properly it will be removed.
The output of dmesg is as follows
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedf7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fedf800-0x000000007fedffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: HP-Pavilion GB394AA-ABU a6030.uk/LEONITE, BIOS 5.17 04/20/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fedf max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5f40-0x000f5f4f] mapped at [ffff8800000f5f40]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fedefff]
[ 0.000000] [mem 0x7fe00000-0x7fedefff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379ea000-0x37cecfff]
[ 0.000000] ACPI: RSDP 00000000000f8310 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000007fee30c0 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fee7a80 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fee3280 004798 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fee0000 000040
[ 0.000000] ACPI: SLIC 000000007fee7cc0 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: HPET 000000007fee7e80 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 000000007fee7f00 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007fee7bc0 000084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 000000007fee8460 000304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedefff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fedefff]
[ 0.000000] NODE_DATA [mem 0x7feda000-0x7fedefff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7fedefff]
[ 0.000000] On node 0 totalpages: 523901
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 519903 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86336 r8192 d24256 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515692
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=104c8e28-5731-4470-8911-313aca8c0d0f rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2047396K/2095604K available (5271K kernel code, 836K rwdata, 1676K rodata, 1124K init, 1324K bss, 48208K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2133.881 MHz processor
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 4269.58 BogoMIPS (lpj=7112936)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003383] Security Framework initialized
[ 0.003400] AppArmor: AppArmor disabled by boot time parameter
[ 0.003402] Yama: becoming mindful.
[ 0.003637] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004945] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005645] Mount-cache hash table entries: 256
[ 0.005953] Initializing cgroup subsys memory
[ 0.005966] Initializing cgroup subsys devices
[ 0.005969] Initializing cgroup subsys freezer
[ 0.005972] Initializing cgroup subsys net_cls
[ 0.005975] Initializing cgroup subsys blkio
[ 0.006006] CPU: Physical Processor ID: 0
[ 0.006008] CPU: Processor Core ID: 0
[ 0.006011] mce: CPU supports 6 MCE banks
[ 0.006021] CPU0: Thermal monitoring enabled (TM2)
[ 0.006030] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.006122] Freeing SMP alternatives memory: 20K (ffffffff819ec000 - ffffffff819f1000)
[ 0.007776] ACPI: Core revision 20131115
[ 0.010162] ACPI: All ACPI Tables successfully acquired
[ 0.013362] ftrace: allocating 21068 entries in 83 pages
[ 0.023793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057912] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (fam: 06, model: 0f, stepping: 06)
[ 0.059999] APIC calibration not consistent with PM-Timer: 4652ms instead of 100ms
[ 0.059999] APIC delta adjusted to PM-Timer: 3346453 (155709996)
[ 0.059999] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059999] perf_event_intel: PEBS disabled due to CPU errata
[ 0.059999] ... version: 2
[ 0.059999] ... bit width: 40
[ 0.059999] ... generic registers: 2
[ 0.059999] ... value mask: 000000ffffffffff
[ 0.059999] ... max period: 000000007fffffff
[ 0.059999] ... fixed-purpose events: 3
[ 0.059999] ... event mask: 0000000700000003
[ 0.083418] x86: Booting SMP configuration:
[ 0.089999] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083422] .... node #0, CPUs: #1
[ 0.089999] x86: Booted up 1 node, 2 CPUs
[ 0.089999] smpboot: Total of 2 processors activated (8538.17 BogoMIPS)
[ 0.090131] devtmpfs: initialized
[ 0.093350] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[ 0.094547] RTC time: 8:54:04, date: 04/02/14
[ 0.094607] NET: Registered protocol family 16
[ 0.094741] cpuidle: using governor ladder
[ 0.094743] cpuidle: using governor menu
[ 0.094771] ACPI: bus type PCI registered
[ 0.094774] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.094845] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.094848] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.094848] PCI: Using configuration type 1 for base access
[ 0.094952] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.094954] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.094955] mtrr: probably your BIOS does not setup all CPUs.
[ 0.094956] mtrr: corrected configuration.
[ 0.096731] bio: create slab <bio-0> at 0
[ 0.096745] ACPI: Added _OSI(Module Device)
[ 0.096745] ACPI: Added _OSI(Processor Device)
[ 0.096745] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.096745] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.100165] ACPI: SSDT 000000007fee7f80 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100379] ACPI: Dynamic OEM Table Load:
[ 0.100382] ACPI: SSDT (null) 000175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100470] ACPI: SSDT 000000007fee8390 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100675] ACPI: Dynamic OEM Table Load:
[ 0.100678] ACPI: SSDT (null) 0000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[ 0.100813] ACPI: Interpreter enabled
[ 0.100824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.100840] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.100842] ACPI: Using IOAPIC for interrupt routing
[ 0.100873] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.100967] ACPI: No dock devices found.
[ 0.103333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.103333] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.103333] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.103333] acpi PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
[ 0.103333] PCI: root bus 00: using default resources
[ 0.103333] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.103333] PCI host bridge to bus 0000:00
[ 0.103333] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.103333] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.103333] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.103333] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.103333] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.103333] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.103333] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.103333] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.103333] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.103333] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.103333] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.103333] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.103333] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.103333] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.103333] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.103379] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.103420] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.103511] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.103555] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
[ 0.103727] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.103741] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.103750] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.103760] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.103769] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.103778] pci 0000:00:1f.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.103876] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.103890] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.103899] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.103907] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.103915] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.103923] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
[ 0.103932] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffc000-0xfdffc3ff]
[ 0.103961] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.104042] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.104093] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.104236] pci 0000:01:00.0: [1002:7181] type 00 class 0x030000
[ 0.104251] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.104262] pci 0000:01:00.0: reg 0x18: [mem 0xfddf0000-0xfddfffff 64bit]
[ 0.104270] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff]
[ 0.104283] pci 0000:01:00.0: reg 0x30: [mem 0xfddc0000-0xfdddffff pref]
[ 0.104314] pci 0000:01:00.0: supports D1 D2
[ 0.104362] pci 0000:01:00.1: [1002:71a1] type 00 class 0x038000
[ 0.104373] pci 0000:01:00.1: reg 0x10: [mem 0xfdde0000-0xfddeffff 64bit]
[ 0.104417] pci 0000:01:00.1: supports D1 D2
[ 0.104457] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.104466] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.104470] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.104473] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.104477] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.104526] pci 0000:02:01.0: [11c1:5811] type 00 class 0x0c0010
[ 0.104543] pci 0000:02:01.0: reg 0x10: [mem 0xfdeff000-0xfdefffff]
[ 0.104616] pci 0000:02:01.0: supports D1 D2
[ 0.104619] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.104672] pci 0000:02:04.0: [1102:0002] type 00 class 0x040100
[ 0.104690] pci 0000:02:04.0: reg 0x10: [io 0xdf00-0xdf1f]
[ 0.104763] pci 0000:02:04.0: supports D1 D2
[ 0.104806] pci 0000:02:04.1: [1102:7002] type 00 class 0x098000
[ 0.104822] pci 0000:02:04.1: reg 0x10: [io 0xde00-0xde07]
[ 0.104895] pci 0000:02:04.1: supports D1 D2
[ 0.104946] pci 0000:02:05.0: [168c:0013] type 00 class 0x020000
[ 0.104964] pci 0000:02:05.0: reg 0x10: [mem 0xfdee0000-0xfdeeffff]
[ 0.105084] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
[ 0.105101] pci 0000:02:08.0: reg 0x10: [mem 0xfdefe000-0xfdefefff]
[ 0.105112] pci 0000:02:08.0: reg 0x14: [io 0xdd00-0xdd3f]
[ 0.105176] pci 0000:02:08.0: supports D1 D2
[ 0.105178] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105247] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.105252] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.105256] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.105262] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.105264] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.105612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.105678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.105743] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.105807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.105870] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.105934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.105998] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.106063] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.106250] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.106258] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.106290] Found 1 acpi root devices
[ 0.106365] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.106365] vgaarb: loaded
[ 0.106365] vgaarb: bridge control possible 0000:01:00.0
[ 0.106365] PCI: Using ACPI for IRQ routing
[ 0.106365] PCI: pci_cache_line_size set to 64 bytes
[ 0.106365] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.106365] e820: reserve RAM buffer [mem 0x7fedf800-0x7fffffff]
[ 0.106365] NetLabel: Initializing
[ 0.106365] NetLabel: domain hash size = 128
[ 0.106365] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.106365] NetLabel: unlabeled traffic allowed by default
[ 0.106365] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.106365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.106365] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.106689] Switched to clocksource hpet
[ 0.109999] pnp: PnP ACPI init
[ 0.109999] ACPI: bus type PNP registered
[ 0.113399] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.113403] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.113406] system 00:00: [io 0x0294-0x0297] has been reserved
[ 0.113408] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.113413] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.113426] pnp 00:01: [dma 4]
[ 0.113459] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.113547] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.113597] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.113626] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.113664] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.113790] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.113848] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.113911] system 00:08: [io 0x0400-0x04bf] has been reserved
[ 0.113915] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.113958] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.114177] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.114182] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.114356] system 00:0b: [mem 0x000cf400-0x000cffff] has been reserved
[ 0.114359] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.114362] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.114365] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.114368] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.114371] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved
[ 0.114374] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.114377] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved
[ 0.114380] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.114382] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.114385] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.114388] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.114390] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.114394] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.114404] pnp: PnP ACPI: found 12 devices
[ 0.114405] ACPI: bus type PNP unregistered
[ 0.120198] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.120198] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.120198] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.120198] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.120198] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.120198] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.120198] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.120198] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.120198] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120198] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.120198] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.120198] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.120198] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.120198] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.120198] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.120198] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.120198] NET: Registered protocol family 2
[ 0.120198] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.120198] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.120198] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.120198] TCP: reno registered
[ 0.120198] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.120198] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.120198] NET: Registered protocol family 1
[ 0.120198] pci 0000:01:00.0: Boot video device
[ 0.120198] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.120198] PCI: CLS 32 bytes, default 64
[ 0.120198] Unpacking initramfs...
[ 0.191296] Freeing initrd memory: 3084K (ffff8800379ea000 - ffff880037ced000)
[ 0.191480] Scanning for low memory corruption every 60 seconds
[ 0.191882] audit: initializing netlink socket (disabled)
[ 0.191902] type=2000 audit(1396428835.189:1): initialized
[ 0.206560] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.208164] zbud: loaded
[ 0.208353] VFS: Disk quotas dquot_6.5.2
[ 0.208404] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.208606] msgmni has been set to 4004
[ 0.208673] Key type big_key registered
[ 0.208929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.208971] io scheduler noop registered
[ 0.208973] io scheduler deadline registered
[ 0.209007] io scheduler cfq registered (default)
[ 0.209208] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.209282] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.209302] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.209360] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.209362] vesafb: scrolling: redraw
[ 0.209364] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.209895] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 5824k, total 5824k
[ 0.265490] Console: switching to colour frame buffer device 175x65
[ 0.320013] fb0: VESA VGA frame buffer device
[ 0.320013] intel_idle: does not run on family 6 model 15
[ 0.320013] GHES: HEST is not enabled!
[ 0.320771] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.321201] Linux agpgart interface v0.103
[ 0.321270] rtc_cmos 00:03: RTC can wake from S4
[ 0.321402] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.321430] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.321540] drop_monitor: Initializing network drop monitor service
[ 0.321607] TCP: cubic registered
[ 0.321718] NET: Registered protocol family 10
[ 0.321912] NET: Registered protocol family 17
[ 0.321924] Key type dns_resolver registered
[ 0.322165] registered taskstats version 1
[ 0.322582] Magic number: 10:872:926
[ 0.322659] rtc_cmos 00:03: setting system clock to 2014-04-02 08:54:05 UTC (1396428845)
[ 0.322694] PM: Hibernation image not present or could not be loaded.
[ 0.324137] Freeing unused kernel memory: 1124K (ffffffff818d3000 - ffffffff819ec000)
[ 0.324139] Write protecting the kernel read-only data: 8192k
[ 0.326967] Freeing unused kernel memory: 860K (ffff880001529000 - ffff880001600000)
[ 0.327354] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
[ 0.335950] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.337560] systemd-udevd[46]: starting version 212
[ 0.357062] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.360689] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.360743] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.364815] ACPI: bus type USB registered
[ 0.364858] usbcore: registered new interface driver usbfs
[ 0.364871] usbcore: registered new interface driver hub
[ 0.367300] usbcore: registered new device driver usb
[ 0.367497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.367497] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.367497] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.369227] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.369272] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 0.370097] hub 1-0:1.0: USB hub found
[ 0.370108] hub 1-0:1.0: 2 ports detected
[ 0.370356] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.370364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.370398] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 0.370561] hub 2-0:1.0: USB hub found
[ 0.370570] hub 2-0:1.0: 2 ports detected
[ 0.370923] ehci-pci: EHCI PCI platform driver
[ 0.371254] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.371263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.371299] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 0.371479] hub 3-0:1.0: USB hub found
[ 0.371489] hub 3-0:1.0: 2 ports detected
[ 0.371685] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.371695] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.371731] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 0.371759] SCSI subsystem initialized
[ 0.372294] hub 4-0:1.0: USB hub found
[ 0.372721] hub 4-0:1.0: 2 ports detected
[ 0.373567] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.373575] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 0.380063] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.380074] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 0.380372] libata version 3.00 loaded.
[ 0.392071] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.392288] hub 5-0:1.0: USB hub found
[ 0.392298] hub 5-0:1.0: 8 ports detected
[ 0.413670] hub 1-0:1.0: USB hub found
[ 0.413685] hub 1-0:1.0: 2 ports detected
[ 0.418065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.428408] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.444932] hub 2-0:1.0: USB hub found
[ 0.444946] hub 2-0:1.0: 2 ports detected
[ 0.475276] hub 3-0:1.0: USB hub found
[ 0.475295] hub 3-0:1.0: 2 ports detected
[ 0.498283] hub 4-0:1.0: USB hub found
[ 0.498296] hub 4-0:1.0: 2 ports detected
[ 0.498418] ata_piix 0000:00:1f.1: version 2.13
[ 0.499273] scsi0 : ata_piix
[ 0.499357] scsi1 : ata_piix
[ 0.499402] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.499404] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.499515] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.499556] ata2: port disabled--ignoring
[ 0.500252] scsi2 : ata_piix
[ 0.500325] scsi3 : ata_piix
[ 0.500368] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 0.500371] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 0.699056] ata4.01: NODEV after polling detection
[ 0.705789] ata4.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33
[ 0.705879] ata1.00: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[ 0.705882] ata1.00: 625142448 sectors, multi 16: LBA48
[ 0.705886] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 0.718854] ata4.00: configured for UDMA/33
[ 0.721647] ata1.00: configured for UDMA/33
[ 0.721797] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 0.725607] ata3.00: ATA-8: SAMSUNG HD320KJ, CP100-10, max UDMA7
[ 0.725612] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.734331] ata3.00: configured for UDMA/133
[ 0.734447] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD320KJ CP10 PQ: 0 ANSI: 5
[ 0.736470] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S755 PQ: 0 ANSI: 5
[ 0.739885] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.739947] sd 0:0:0:0: [sda] Write Protect is off
[ 0.739950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.739977] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.740339] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.740397] sd 2:0:0:0: [sdb] Write Protect is off
[ 0.740400] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.740426] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.743908] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.743912] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.744145] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.748725] sdb: sdb1 sdb2
[ 0.749036] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 0.752217] usb 5-6: new high-speed USB device number 2 using ehci-pci
[ 0.778689] sda: sda1 sda2 sda3 sda4
[ 0.779129] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.929217] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800013adf24, S400
[ 1.006684] usb 5-7: new high-speed USB device number 3 using ehci-pci
[ 1.173252] usb-storage 5-7:1.0: USB Mass Storage device detected
[ 1.173332] scsi4 : usb-storage 5-7:1.0
[ 1.173427] usbcore: registered new interface driver usb-storage
[ 1.197356] tsc: Refined TSC clocksource calibration: 2133.939 MHz
[ 1.616813] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 1.624951] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.920203] random: nonblocking pool is initialized
[ 2.247183] Switched to clocksource tsc
[ 2.253827] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 2.260322] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 2.266946] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 2.273571] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 2.280559] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.281310] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 2.282059] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 2.282809] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 2.498874] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.499029] systemd[1]: Detected architecture 'x86-64'.
[ 2.499095] systemd[1]: No hostname configured.
[ 2.499100] systemd[1]: Set hostname to <localhost>.
[ 3.019084] systemd[1]: Configuration file /etc/systemd/system/netctl@ethernet\x2dstatic.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.052564] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.168175] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.168523] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.168587] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.168600] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s8.device...
[ 3.168617] systemd[1]: Starting Remote File Systems.
[ 3.168629] systemd[1]: Reached target Remote File Systems.
[ 3.168639] systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s5.device...
[ 3.168655] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.168691] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.168701] systemd[1]: Starting Paths.
[ 3.168712] systemd[1]: Reached target Paths.
[ 3.168722] systemd[1]: Starting Encrypted Volumes.
[ 3.168732] systemd[1]: Reached target Encrypted Volumes.
[ 3.168756] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.168851] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.168865] systemd[1]: Expecting device dev-sda4.device...
[ 3.168877] systemd[1]: Expecting device dev-disk-by\x2duuid-8e743759\x2dc6f4\x2d4e8f\x2dae25\x2d2c24a8cba618.device...
[ 3.168890] systemd[1]: Expecting device dev-disk-by\x2duuid-c96171f5\x2d9704\x2d4abf\x2d84ae\x2d2c4f78252a60.device...
[ 3.168900] systemd[1]: Expecting device dev-disk-by\x2duuid-12EC23D6EC23B341.device...
[ 3.168911] systemd[1]: Starting Root Slice.
[ 3.175997] systemd[1]: Created slice Root Slice.
[ 3.176010] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.176047] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.176058] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.176087] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.176098] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.176119] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.176133] systemd[1]: Starting udev Kernel Socket.
[ 3.176155] systemd[1]: Listening on udev Kernel Socket.
[ 3.176169] systemd[1]: Starting udev Control Socket.
[ 3.176193] systemd[1]: Listening on udev Control Socket.
[ 3.176203] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.176232] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.176243] systemd[1]: Starting User and Session Slice.
[ 3.176438] systemd[1]: Created slice User and Session Slice.
[ 3.176452] systemd[1]: Starting Journal Socket.
[ 3.176501] systemd[1]: Listening on Journal Socket.
[ 3.176518] systemd[1]: Starting System Slice.
[ 3.176712] systemd[1]: Created slice System Slice.
[ 3.176728] systemd[1]: Started File System Check on Root Device.
[ 3.176738] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.176940] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.176954] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.212380] systemd[1]: Started Load Kernel Modules.
[ 3.252481] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.253015] systemd[1]: Starting udev Coldplug all Devices...
[ 3.253553] systemd[1]: Mounted FUSE Control File System.
[ 3.253577] systemd[1]: Mounting Configuration File System...
[ 3.254197] systemd[1]: Starting Setup Virtual Console...
[ 3.254782] systemd[1]: Mounting Debug File System...
[ 3.255307] systemd[1]: Mounting Huge Pages File System...
[ 3.285128] systemd[1]: Starting Apply Kernel Variables...
[ 3.285663] systemd[1]: Starting system-netctl.slice.
[ 3.285916] systemd[1]: Created slice system-netctl.slice.
[ 3.285940] systemd[1]: Starting system-getty.slice.
[ 3.286240] systemd[1]: Created slice system-getty.slice.
[ 3.286797] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.286822] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.287292] systemd[1]: Starting Journal Service...
[ 3.287880] systemd[1]: Started Journal Service.
[ 4.510133] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.568872] systemd-udevd[136]: starting version 212
[ 5.479614] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.479621] ACPI: Power Button [PWRB]
[ 5.479693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.479697] ACPI: Power Button [PWRF]
[ 5.490126] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.490129] ACPI: Thermal Zone [THRM] (19 C)
[ 5.629665] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
[ 5.629673] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM1K 2 (20131115/utaddress-251)
[ 5.629677] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE1 3 (20131115/utaddress-251)
[ 5.629682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629685] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
[ 5.629689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629691] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
[ 5.629695] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 2 (20131115/utaddress-251)
[ 5.629699] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \PALD 3 (20131115/utaddress-251)
[ 5.629703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.629705] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.639853] leds_ss4200: no LED devices found
[ 5.687416] ACPI: Fan [FAN] (on)
[ 5.708079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.931908] cfg80211: Calling CRDA to update world regulatory domain
[ 6.109750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.109754] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.133562] e100 0000:02:08.0 eth0: addr 0xfdefe000, irq 20, MAC addr 00:1a:92:de:71:43
[ 6.410441] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.599698] gameport gameport0: EMU10K1 is pci0000:02:04.1/gameport0, io 0xde00, speed 980kHz
[ 6.659464] [drm] Initialized drm 1.1.0 20060810
[ 6.722900] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.926377] iTCO_vendor_support: vendor-support=0
[ 6.963443] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.963473] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
[ 6.963581] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.184227] Adding 4286784k swap on /dev/sda4. Priority:-1 extents:1 across:4286784k FS
[ 7.195727] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[ 7.263090] rtl8192cu: Chip version 0x11
[ 7.334816] ath5k 0000:02:05.0: registered as 'phy1'
[ 7.352471] rtl8192cu: MAC address: 80:1f:02:af:89:eb
[ 7.352477] rtl8192cu: Board Type 0
[ 7.352718] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 7.352752] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 7.352808] usbcore: registered new interface driver rtl8192cu
[ 7.445824] [drm] radeon kernel modesetting enabled.
[ 7.445878] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 7.445880] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 7.316873] systemd-udevd[150]: renamed network interface eth0 to enp2s8
[ 7.445900] Console: switching
[ 7.445902] to colour dummy device 80x25
[ 7.446670] [drm] initializing kernel modesetting (RV515 0x1002:0x7181 0x1462:0x0400).
[ 7.446689] [drm] register mmio base: 0xFDDF0000
[ 7.446691] [drm] register mmio size: 65536
[ 7.446807] ATOM BIOS: 113
[ 7.446821] [drm] Generation 2 PCI interface, using max accessible memory
[ 7.446827] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 7.446830] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 7.446845] [drm] Detected VRAM RAM=512M, BAR=256M
[ 7.446847] [drm] RAM width 128bits DDR
[ 7.446916] [TTM] Zone kernel: Available graphics memory: 1026428 kiB
[ 7.446918] [TTM] Initializing pool allocator
[ 7.446923] [TTM] Initializing DMA pool allocator
[ 7.446942] [drm] radeon: 512M of VRAM memory ready
[ 7.446944] [drm] radeon: 512M of GTT memory ready.
[ 7.446965] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.458262] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 7.459147] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 7.459171] radeon 0000:01:00.0: WB enabled
[ 7.459176] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffff88007bb31000
[ 7.459179] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.459180] [drm] Driver supports precise vblank timestamp query.
[ 7.459192] [drm] radeon: irq initialized.
[ 7.459208] [drm] Loading R500 Microcode
[ 7.476935] platform microcode: Direct firmware load failed with error -2
[ 7.476939] platform microcode: Falling back to user helper
[ 7.477387] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[ 7.477402] platform microcode: Direct firmware load failed with error -2
[ 7.477405] platform microcode: Falling back to user helper
[ 7.477982] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 7.503453] [drm] radeon: ring at 0x0000000020001000
[ 7.503490] [drm] ring test succeeded in 6 usecs
[ 7.503671] [drm] ib test succeeded in 0 usecs
[ 7.503948] [drm] Radeon Display Connectors
[ 7.503950] [drm] Connector 0:
[ 7.503951] [drm] DVI-I-1
[ 7.503953] [drm] HPD2
[ 7.503955] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.503957] [drm] Encoders:
[ 7.503958] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.503960] [drm] DFP3: INTERNAL_LVTM1
[ 7.503961] [drm] Connector 1:
[ 7.503963] [drm] SVIDEO-1
[ 7.503964] [drm] Encoders:
[ 7.503965] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.503967] [drm] Connector 2:
[ 7.503968] [drm] DVI-I-2
[ 7.503969] [drm] HPD1
[ 7.503971] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.503973] [drm] Encoders:
[ 7.503974] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.503976] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 7.583351] [drm] fb mappable at 0xE00C0000
[ 7.583351] [drm] vram apper at 0xE0000000
[ 7.583351] [drm] size 7258112
[ 7.583351] [drm] fb depth is 24
[ 7.583351] [drm] pitch is 6912
[ 7.583719] fbcon: radeondrmfb (fb0) is primary device
[ 7.600235] Console: switching to colour frame buffer device 210x65
[ 7.605874] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.605877] radeon 0000:01:00.0: registered panic notifier
[ 7.605883] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 7.625781] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 7.626479] rtlwifi: wireless switch is on
[ 7.642639] fuse init (API version 7.22)
[ 7.647140] ath: EEPROM regdomain: 0x0
[ 7.647144] ath: EEPROM indicates default country code should be used
[ 7.647146] ath: doing EEPROM country->regdmn map search
[ 7.647149] ath: country maps to regdmn code: 0x3a
[ 7.647151] ath: Country alpha2 being used: US
[ 7.647153] ath: Regpair used: 0x3a
[ 7.647274] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 7.647537] ath5k: phy1: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[ 7.647540] ath5k: phy1: RF5111 5GHz radio found (0x17)
[ 7.647543] ath5k: phy1: RF2111 2GHz radio found (0x23)
[ 7.709874] systemd-udevd[143]: renamed network interface wlan1 to wlp2s5
[ 8.136233] systemd-udevd[141]: renamed network interface wlan0 to wlp0s29f7u6
[ 8.322562] coretemp coretemp.0: Using relative temperature scale!
[ 8.322706] coretemp coretemp.0: Using relative temperature scale!
[ 8.594743] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 8.638575] mousedev: PS/2 mouse device common for all mice
[ 9.284691] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.328865] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.357627] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 10.363499] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[ 10.363772] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[ 10.865860] systemd-journald[119]: Received request to flush runtime journal from PID 1
[ 11.002834] rtl8192cu: MAC auto ON okay!
[ 11.035475] rtl8192cu: Tx queue select: 0x05
[ 11.407281] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 12.592937] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 12.617024] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 12.654273] wlp0s29f7u6: authenticated
[ 12.659239] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 12.663526] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 12.663558] wlp0s29f7u6: associated
[ 12.663598] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 216.768500] perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 295.526133] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 295.538508] cfg80211: Calling CRDA for country: US
[ 295.779488] rtl8192cu: MAC auto ON okay!
[ 295.813132] rtl8192cu: Tx queue select: 0x05
[ 296.188680] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 297.158587] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 297.171430] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 297.181575] wlp0s29f7u6: authenticated
[ 297.185043] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 297.198798] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 297.198839] wlp0s29f7u6: associated
[ 297.198885] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 466.957760] perf samples too long (4993 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
[ 653.237523] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 653.252189] cfg80211: Calling CRDA for country: GB
[ 653.492515] rtl8192cu: MAC auto ON okay!
[ 653.526155] rtl8192cu: Tx queue select: 0x05
[ 653.902071] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 654.830321] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 654.843456] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 654.863972] wlp0s29f7u6: authenticated
[ 654.867473] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 654.879214] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 654.879258] wlp0s29f7u6: associated
[ 654.879319] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 845.720733] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 845.733072] cfg80211: Calling CRDA to update world regulatory domain
[ 845.972288] rtl8192cu: MAC auto ON okay!
[ 846.005180] rtl8192cu: Tx queue select: 0x05
[ 846.376969] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 847.303644] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 847.316223] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 847.341107] wlp0s29f7u6: authenticated
[ 847.345443] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 847.369345] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 847.369380] wlp0s29f7u6: associated
[ 847.369422] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1165.243225] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1165.255458] cfg80211: Calling CRDA for country: GB
[ 1165.501950] rtl8192cu: MAC auto ON okay!
[ 1165.534590] rtl8192cu: Tx queue select: 0x05
[ 1165.906506] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1166.922571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1166.935133] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1166.962884] wlp0s29f7u6: authenticated
[ 1166.963550] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1166.969384] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1166.969418] wlp0s29f7u6: associated
[ 1166.969455] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1317.334883] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1317.347568] cfg80211: Calling CRDA to update world regulatory domain
[ 1317.593153] rtl8192cu: MAC auto ON okay!
[ 1317.625922] rtl8192cu: Tx queue select: 0x05
[ 1318.002339] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1318.943694] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1318.959587] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1318.961335] wlp0s29f7u6: authenticated
[ 1318.965144] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1318.988340] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1318.988376] wlp0s29f7u6: associated
[ 1318.988421] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1469.086853] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1469.099248] cfg80211: Calling CRDA to update world regulatory domain
[ 1469.337346] rtl8192cu: MAC auto ON okay!
[ 1469.370119] rtl8192cu: Tx queue select: 0x05
[ 1469.742158] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1470.673984] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1470.686540] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1470.691410] wlp0s29f7u6: authenticated
[ 1470.693241] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1470.702651] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1470.702687] wlp0s29f7u6: associated
[ 1470.702728] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 1680.753182] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 1680.765752] cfg80211: Calling CRDA for country: GB
[ 1680.998495] rtl8192cu: MAC auto ON okay!
[ 1681.031255] rtl8192cu: Tx queue select: 0x05
[ 1681.406799] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 1682.318347] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 1682.330930] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 1682.342673] wlp0s29f7u6: authenticated
[ 1682.343689] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 1682.350924] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 1682.350956] wlp0s29f7u6: associated
[ 1682.350994] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2206.980860] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2206.993170] cfg80211: Calling CRDA to update world regulatory domain
[ 2207.227511] rtl8192cu: MAC auto ON okay!
[ 2207.260157] rtl8192cu: Tx queue select: 0x05
[ 2207.631823] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2208.565086] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2208.577695] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2208.585581] wlp0s29f7u6: authenticated
[ 2208.587355] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 2208.616071] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 2208.616112] wlp0s29f7u6: associated
[ 2208.616155] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2504.014135] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2504.026462] cfg80211: Calling CRDA to update world regulatory domain
[ 2504.273688] rtl8192cu: MAC auto ON okay!
[ 2504.309828] rtl8192cu: Tx queue select: 0x05
[ 2504.702760] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2505.627571] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2505.640510] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2505.649754] wlp0s29f7u6: authenticated
[ 2505.650508] wlp0s29f7u6: associate with 2c:39:96:b3:ba:40 (try 1/3)
[ 2505.680782] wlp0s29f7u6: RX AssocResp from 2c:39:96:b3:ba:40 (capab=0x431 status=0 aid=44)
[ 2505.680831] wlp0s29f7u6: associated
[ 2505.680887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u6: link becomes ready
[ 2948.553142] wlp0s29f7u6: deauthenticating from 2c:39:96:b3:ba:40 by local choice (reason=3)
[ 2948.565823] cfg80211: Calling CRDA for country: GB
[ 2948.814051] rtl8192cu: MAC auto ON okay!
[ 2948.846690] rtl8192cu: Tx queue select: 0x05
[ 2949.220485] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u6: link is not ready
[ 2950.173570] wlp0s29f7u6: authenticate with 2c:39:96:b3:ba:40
[ 2950.186113] wlp0s29f7u6: send auth to 2c:39:96:b3:ba:40 (try 1/3)
[ 2950.190241] wlp0s29f7u6: authenticated
If there is anything else I can provide that may help please ask, this has been driving me mad for days now!

Looks like a driver bug. You could try multiple things, as a start:
- switch channel
- toggle encryption
- different usb port

I am attempting to plug my mac into my tv. I am using the mini dvi to s video adapter. When I plug it in, the display goes all wonky and becomes stretched and enlarged.

When I attempt to connect my mac to the monitor using a mini dvi to s video adapter the display becomes enlarged and stretched. I cannot seem to fix this using the system preferences or the quick keys that allow you to zoom in on the display. Any suggestions?

I am using MAC OSx 10.5.8 (9L31a) as my operation system. The TV says "No signal. Check connected device's power, cable connection and source selection." Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display. But how do I do that?

Mini dvi to Component Video adapter !

Help !
Where Can I Find "mini dvi to Component Video adapter" ?
Help !

"there is no such thing in apple store"
I MAID,
Begging your pardon, but I just tried the above linked Search Results, and what you seek is apparently on the list, as the search was performed exactly as you specified. You can read the description of the various items for sale and tell us what is different about the one that you need. That way we can perform a new search for you, or, in the alternative, you can search for yourself. If the Apple Store doesn't have what you want, search CompUSA.

Mini-DVI to S-Video Adapter doesn't work

Hi, I am using the Mini-DVI to S-Video adapter from apple to connect my macbook to the TV. But the only thing I get is a grey flickering picture on my TV. When I click on the monitor-button I can see that my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display. I tried all different resolutions, but needless to say it doesn't work.
Can the adapter be broken, or is there a problem with the macbook?
Macbook white 2 GHz Intel Core Duo 1GB RAM Mac OS X (10.4.8)

my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display
If you connect the Mini-DVI to S-Video adapter, the monitor button on the menubar should show resolutions for Color LCD in one section and NTSC/PAL in the other.
A grey flickering picture is indicative of picking the wrong standard-PAL vs. NTSC.

Mini dvi to s-video adapter

when i connect my macbook to my sanyo hdtv via the mini dvi to s-video adapter the image on the computer screen apears on the tv, but with orange stripes down it.

At what resolution? Have you tried different ones?

Mini-DVI to S-video adapter and no colour on TV screen

I just purchased a mini-DVI to S-video adapter for my MacBook. I want to connect it to my TV through my DVD/Video player.
I do get a nice picture on the TV and I can manage it in the screen settings panel, BUT the TV-screen doesn't show any colour, just black and white. Why?
I've tried several settings in the Preferences panel, but no luck. What to do?

The cable is brand new and I've checked it with a mulitmeter. It's OK.
I've also heard that this is a fairly common problem with S-video and I got a tip to try the composite video instead. It worked beautifully, so now I've got nice and crisp video in full colour on my TV!

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter?
If you can find such a thing. I really doubt that exists since USB is a data connector not a video connector.
would allow me to run the audio through my stereo.
That would depend on this adapter.

DVI to s-video adapter altering laptop display after connection with TV

Greetings,
I recently got my MacBook Pro to display on my TV via the dvi to s-video adapter (also connected stereo sound). Everything works great, but ... after I disconnect the windows on several of my programs are altered (stretched, shortened, often relocated offscreen or very near off-screen). My ical window refused to display at all. I trashed the ical preference file in the Library, restarted the program and I could see the window again. I'm going to be connecting with my TV a lot. It will be a pain to have to trash preferences files after every connect. Anyone know what's going on?
Thanks,
Sigi
MacBook Pro Mac OS X (10.4.6)
MacBook Pro Mac OS X (10.4.6)

What happens if you quit all those applications prior to making the connection to the TV? I would think that should prevent the windows from dynamically resizing. But they are still going to have to resize if you open those apps while connected to the TV.
Mac OS is trying to keep the open windows completely on the desktop. Since your TV's screen is likely much smaller (in pixels) than the 1680 x 1050 pixels of the MBP, the windows are being shrunk and in some cases repositioned so they fit on the desktop when connected to the TV. Unfortunately, the previous settings are forgotten and not restored when you disconnect.

Dynex mini-DVI to S-video adapter

I bought a Dynex mini-DVI to S-video adapter with my Macbook and I just tried to use it to plug into my projector via S-video. The resolution of my screen dropped to 800x600 but otherwise nothing happened. I even followed the Max OS X help information and turned on the computer with the adapter and cable plugged in and it still didn't display on the projector. I went to the display settings in system preferences and asked it to detect displays but I don't think it changed anything either. It seems the Dynex website is rather sparse on documentation and support. Any ideas? It'd be greatly appreciated!

I've tried pretty much everything with the same mini-DVI adapter made by Dynex.. if anyone can help it would be much appreciated!

Mini DisplayPort to DVI + DVI to VGA Display Adapter, will it work?

Hi,
I have a MBP, and I have just purchased an apple Mini DisplayPort to DVI adapter.
I want to connect it to a VGA port.
Can I buy an Apple DVI to VGA Display Adapter and connect it to the connector above.
Will that work? Any one with experience who could advise me on that?
Thanks.

This does not work, because the Mini DisplayPort to DVI adapter has a DVI-D port that transmits only digital signals. VGA uses analog signals.

New imac to tv help: mDVI to DVI cable, DVI to component video adapter?

I am getting my new imac tomorrow, very excited. I would love to be able to hook it up to my HD tv which has component video inputs.
It has two by the way, one says component video, one says component video HD. (that's the one my xbox is hooked up to.)
I think I'm getting like 1020p or something like that?
am aware of the lack of sound, but will have the imac hooked up to speakers so no worries on that.
will this chain work? mDVI-DVI cable, DVI to component video adapter? then what? component video cable to tv?
so I will need to buy two adapters and one cable right? Also, the cable is gonna need to be about 30ft long so will I be able to daisy chain cables?
PS, what kind of resolution will I be getting with the standard (none component HD) inputs?
thanks for the help. The info on the mac sight about adapters in not very specific to this hodge podge.
Message was edited by: public radio
Message was edited by: public radio

1) It's female.
2) Of course.

Why does my DVI to S Video adapter not work on my Macbook Pro since installing Snow Leopard?

The Apple DVI to S Video Adapter worked before installing Snow Leopard. Now I just get a blue screen.

.wpl appears to be a Windows Media Player playlist. I can find no conversion software for that, and Windows Media Player is not available for Mac anymore.
If you can persuade him to download iTunes and create the playlist as mp3 in a iTunes playlist, or even just burn the base mp3 files to CD as a data disc, that's about the only solutions I can suggest.

ATI dvi to component video adapter?

I have an older HDTV that only has component video inputs (for HD signals anyway). The macbook pro has an ATI graphics processor, so I took a chance and ordered the ATI dvi to component video adapter:
http://www.amazon.com/exec/obidos/redirect?link_code=ur2&tag=replaylink-20&camp= 1789&creative=9325&path=http%3A%2F%2Fwww.amazon.com%2Fgp%2Fproduct%2FB00068NSZA
I know it doesn't work with the old ati single-link dvi macs, has anyone tried it with the new x1600 based macs?

I have the same problem. I have found out that RGB output from computers is actually RGBHV, which includes vertical and horizontal sync signals. Therefore conversion from Macbook Pro DVI or RGB to plasma component (YPrPb) requires more than just a simple converter like ATI DVI to Component video adaptor, unless Apple can output component video from the video card (that's theoretically possible, but it depends on how Apple integrated the chipset into the motherboard, according to ATI).
The alternative is to use a processor to convert the signal. Key Digital produce a signal transcoder, KT-VTCA3. http://www.keydigital.com/ProductDetail.aspx?categorycode=500&itemno=KDVTCA3&pro ductname=Video%20and%20Control%20Adapters. I have ordered one of these and believe it will work, in lieu of Apple providing a means for outputting component video directly from the Macbook Pro.
This is also available from a seller in UK over ebay. http://cgi.ebay.co.uk/Key-Digital-ClearColor3-VGA-To-Component-TRANSCODER_W0QQit emZ9700214677QQcategoryZ22610QQssPageNameZWDVWQQrdZ1QQcmdZViewItem.

Dvi to FW/USB adapter?

Similar Messages

Maybe you are looking for