DVI to S-video

I've windows vista business on my MacPro and when i connect it through s-video to my Tv using Mac OS it works perfectly but on windows it does not dispay anything on the TV. Please, i need help.
Thank You
deeds

No joy. Thanks for the tip, though. Being new to Apple, I didn't realize there was a safe boot option.
I booted using safe boot and the display was fine, so I should be able to completely rule out any hardware problems.
I set the resolution I wanted, color depth, made sure NTSC was selected, and the rebooted. Everything looked great, it auto logged on as my default user...and...back to the screwy screen again. I am pretty sure now, that it is stuck in PAL mode for some reason. Maybe I clicked on a PAL standard resolution by accident and it automatically changed the refresh rate to 50 Hz.
I cannot get to the computer now, but I realized that I logged in as my admin user when I safe booted. Are the display settings for each user independent? Should I have logged in as the default user and changed the settings?
Mac Mini Mac OS X (10.4.6)

Similar Messages

  • I am attempting to plug my mac into my tv. I am using the mini dvi to s video adapter. When I plug it in, the display goes all wonky and becomes stretched and enlarged.

    When I attempt to connect my mac to the monitor using a mini dvi to s video adapter the display becomes enlarged and stretched. I cannot seem to fix this using the system preferences or the quick keys that allow you to zoom in on the display. Any suggestions?

    I am using MAC OSx 10.5.8 (9L31a) as my operation system.  The TV says "No signal.  Check connected device's power, cable connection and source selection."  Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display.  But how do I do that?

  • Mini DVI to S-video display problem

    I connect my macbook to a plasma TV using mini DVI to S-video adapter so I can give keynote presentations. All of a sudden, having not changed any settings, the plasma display went to black & white while my macbook's display remains in color. I have checked with two different s-video cables and with another TV, as well as trying to change the color display in my system preferences, but after several hours have given up. Anyone else have this problem or have any thoughts on how to alleviate it? Thanks
    Hungus

    A wire may have broken inside the mini DVI to S-video adapter. S-video uses one wire for the brightness, and one for the color information. If the color wire breaks you will get a black and white picture. Until Apple replaces the adapter, you could use the composite video output, but the picture will not be as sharp.

  • Mini dvi to Component Video adapter !

    Help !
    Where Can I Find "mini dvi to Component Video adapter" ?
    Help !

    "there is no such thing in apple store"
    I MAID,
    Begging your pardon, but I just tried the above linked Search Results, and what you seek is apparently on the list, as the search was performed exactly as you specified. You can read the description of the various items for sale and tell us what is different about the one that you need. That way we can perform a new search for you, or, in the alternative, you can search for yourself. If the Apple Store doesn't have what you want, search CompUSA.

  • Mini DVI to S-video and composite giving complete distorted output!!

    I tried to hook up my 20" Sony Trinitron either through S-video or composite to the powerbook without any success. I got completely distorted picutre. I have tried all the video resolution setting that is available on the Displays reference window with the same result. Does anybody out there run into this problem at all.

    I have a 12" PowerBook 1.5ghz and had the same problem with garbled video today. When I plugged in the Mini-DVI > Composite/S-Video adapter the PowerBook would consistently think it was attached to an ordinary VGA monitor, and could not sync with the television. This caused a B&W, warped, split in half picture.
    I took the adapter back to the Apple store, plugged it into one of their demo units, and saw it behaved the same way. They gave me a replacement and everything has been fine since.
    QS2002, 1.4ghz, 1gb, GeForce 4 Ti4600, SATA; 12" PB 1.5ghz, 512mb   Mac OS X (10.4.4)  

  • Mini-DVI to S-Video resolution

    I've plugged my Mini-DVI to S-Video adapter into the MacBook, but there is only limited selection of resolutions available in the NTSC/PAL preference pane. My Mac mini S-Video adapter has options for 16:9 output, but the MacBook only lists the following (none are 16:9 resolutions):
    640 x 480
    720 x 480
    720 x 576
    800 x 600
    1024 x 768
    Any ideas how I can get the MacBook to output 16:9 widescreen via the S-Video adapter?
    Thanks very much, Rich

    Thanks namke, had no idea that rectangular pixels were employed to achieve widescreen on a TV - you learn something new everyday!
    I wondered what other MacBook users get when they plug in the mini dvi to s-video adpater because 16:9 resolution is an option when a DVI adapter is plugged into my Mac mini (e.g. 1024 x 576), but not my MacBook.

  • Mini-DVI to S-Video Adapter doesn't work

    Hi, I am using the Mini-DVI to S-Video adapter from apple to connect my macbook to the TV. But the only thing I get is a grey flickering picture on my TV. When I click on the monitor-button I can see that my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display. I tried all different resolutions, but needless to say it doesn't work.
    Can the adapter be broken, or is there a problem with the macbook?
    Macbook white 2 GHz Intel Core Duo 1GB RAM   Mac OS X (10.4.8)  

    my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display
    If you connect the Mini-DVI to S-Video adapter, the monitor button on the menubar should show resolutions for Color LCD in one section and NTSC/PAL in the other.
    A grey flickering picture is indicative of picking the wrong standard-PAL vs. NTSC.

  • Mini dvi to s-video adapter

    when i connect my macbook to my sanyo hdtv via the mini dvi to s-video adapter the image on the computer screen apears on the tv, but with orange stripes down it.

    At what resolution? Have you tried different ones?

  • Mini-DVI to S-video adapter and no colour on TV screen

    I just purchased a mini-DVI to S-video adapter for my MacBook. I want to connect it to my TV through my DVD/Video player.
    I do get a nice picture on the TV and I can manage it in the screen settings panel, BUT the TV-screen doesn't show any colour, just black and white. Why?
    I've tried several settings in the Preferences panel, but no luck. What to do?

    The cable is brand new and I've checked it with a mulitmeter. It's OK.
    I've also heard that this is a fairly common problem with S-video and I got a tip to try the composite video instead. It worked beautifully, so now I've got nice and crisp video in full colour on my TV!

  • Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

    Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

    Check the projector and see what kind of input is has, most have a VGA connector, so you would need a male to male VGA. You will also need the Mac mini dvi to male VGA (of course).
    Some of the older projetors have a component in only, which is the red,yellow,green, RCA connectors, which are avaialable. (Usually the are fairy short, 5 ft or so,  so you would need to get a VGA with yhe mini DVI to VGA, and a component (the one with the 3 RCA's) you will probaly have to get a Female to Female VGA adapter to connect te VGA to the component.
    And finaally if that weren't enough, the really old projectors have only a composite input. All I can say about that is "the hunt is on"
    Best of luck

  • Problems with Mini DVI to S-Video/RCA adapter

    Hello
    I've got a mac mini and I want to pass its image to a television (note: this television doesn't have HDMI)
    I've bought the Mini DVI to S-Video/RCA adapter, but when I connect it to my TV nothing appers (except some gray lines, which means the signal is reaching the TV, but no image)
    Thanks

    That connector may not be compatible with an Intel Core 2 Duo Mac Mini like yours.
    http://store.apple.com/us/product/M9319G/A?fnode=MTY1NDA3Ng&mco=MTA4NDU1MTE
    The Apple Mini-DVI to Video adapter is designed for use with the iMac (Intel Core Duo), MacBook*, and 12-inch PowerBook G4.

  • Mini Dvi to S-video/Composite/RCA

    I have a 2007 black macbook and recently bought a Mini-DVI to video adapter (brand-dynex) and hooked it up to my older television (TV has no hdmi hookup or dvi, just S-Video and RCA) and I could faintly make out my computer screen but it was all "scratchy" and was moving across the screen. I changed the resolution and it became black and gray lines moving up and down the screen. I was wondering how can I hook my computer up to this older TV to watch movies online (I wont be upset with low quality). Do I need to purchase the Apple brand adapter or is there some "tweeking" I can do to make the Dynex one work? thanks

    Honestly, I was afraid of this... Oh well, I bought it off ebay and got my money refunded so no harm done. Thanks for the help and if anyone can figure some application or anything and get their adaptor to work, please contact me thanks....

  • DVI to s-video adapter altering laptop display after connection with TV

    Greetings,
    I recently got my MacBook Pro to display on my TV via the dvi to s-video adapter (also connected stereo sound). Everything works great, but ... after I disconnect the windows on several of my programs are altered (stretched, shortened, often relocated offscreen or very near off-screen). My ical window refused to display at all. I trashed the ical preference file in the Library, restarted the program and I could see the window again. I'm going to be connecting with my TV a lot. It will be a pain to have to trash preferences files after every connect. Anyone know what's going on?
    Thanks,
    Sigi
    MacBook Pro Mac OS X (10.4.6)
    MacBook Pro   Mac OS X (10.4.6)  

    What happens if you quit all those applications prior to making the connection to the TV? I would think that should prevent the windows from dynamically resizing. But they are still going to have to resize if you open those apps while connected to the TV.
    Mac OS is trying to keep the open windows completely on the desktop. Since your TV's screen is likely much smaller (in pixels) than the 1680 x 1050 pixels of the MBP, the windows are being shrunk and in some cases repositioned so they fit on the desktop when connected to the TV. Unfortunately, the previous settings are forgotten and not restored when you disconnect.

  • Mini-DVI to s-video: black bar on left side

    Hi,
    When outputting video through "the mini-DVI to s-video adapter" i have a black bar on the left side of my television.
    It seems like the 1024*768 resolution is not able to completely fit the 4:3 area of my television (the image is to small).
    any ideas?
    thanks!

    I'm absolutely sure everything is displaying and that the image is not deformed in any way.
    So my conclusion is that the image is just smaller (in every dimension) than it should be and than it was before.
    I will try a lower resolution later today.
    thanks for your help and interest!

  • Mini DVI to S-Video B&W only!!

    I bought a Mini DVI to S-Video adapter and a S-video to RCA cable to hook my MacBook up to my TV, but when I plug it in I can only see it in Black and White. I checked System Prefs>Displays and tried out several different profiles, to no avail. FWIW the audio seems to be fine.
    What am I doing wrong? Thanks in advance for your assistance.

    In my experience when you try to connect an s-video source to a TV you need the TV to be able to accept s-video signals or it does come out black and white.
    One of my televisions has front inputs which consist of one s-video plus the standard three phonos. If i dont tell the tv its an s-video cable the image is black and white.I had the same kinda thing with an older tv when using a scart convertor which had s-video input. I had to use the correct scart socket which was the one that supported s-video and then tell the tv it was s-video by switching to AV2/S instead of just AV2.

  • When I unplug Mini-dvi to S-video adapter mouse often disappears

    When I unplug my mini-dvi to s-video/rca adapter, the mouse cursor often disappears. This results in me having to restart the computer. Does anyone know how to fix this problem?

    At what resolution? Have you tried different ones?

Maybe you are looking for

  • Stock in transit on a particular date

    Hi Gurus, Can you please tell me how to take stock in transit on a particular date (past date and not on current date). Thanks & Best regards

  • Lost sound devices now blue screen of death when updating creative drivers.

    I have an XPS with windows 7, dont k now what the sound card is, I have factory installed software for Creative X something extreme, and Realtex. Now I had been trying to get sound via an optical cable to an AV amp with no success. I had tried disabl

  • Sign pdf and submit without saving locally?

    We have a site license for Acrobat Pro 8. We've developed a dynamic online form with a submit button on it which posts back the server. The form is opened in Acrobat 8, not the web browser (by configuration, since we have to save the entire pdf and n

  • 404 error after userdetails on OEM console

    Hi All, I am facing HTTP 404 Not Found page after filling username and password at https://<server-IP>:port/em/console. at command line i verified emctl status and restarted twice and dbconsole up & running. Verified in diffrent browers and desktops.

  • Import of ERwinR8 data models into Oracle SQL Developer Data Modeler

    Hi!  My site want to move off ERwin R8 and use Oracle SQL Developer Data Modeler.  When will Oracle SQL Developer Data Modeler support the import of ERwin R8data model xml? Thanks very much,  Patty