DVI video cards for older PowerMacs

Hi all,
Just curious but may I be able to install dvi video PCI cards in my 8600 and G3 mini-tower like the way G4 towers are configured?
Thanks for your help
web dude

PCI versions of the Radeon MacEdition with fan, Radeon 7000, and Radeon 9200 are available with that connector in addition to a VGA connector. But shop very carefully, the AGP versions (with the quirky little tab at the end of the connector) are plentiful and affordable and will not fit in those Macs.

Similar Messages

  • Suggestions for dual DVI video card for Elite 8000 SFF?

    Any suggestions for dual dvi video cards that will fit the Elite 8000 SFF?
    Thank you,
    jajke

    Hi:
    The standard card is the Radeon HD 6350.
    http://www.amazon.com/Radeon-512MB-Profile-Bracket-DMS-59/dp/B004ZY77YY/ref=sr_1_2?s=pc&ie=UTF8&qid=...
    Then get the dvi dms-59 splitter cable.
    http://www.amazon.com/HP-DL139A-video-splitter/dp/B000225EN4/ref=pd_bxgy_e_img_y

  • Top two best video cards for older Mac Pros?

    I have some older Mac Pro towers that vary from:
    2.66 GHz Quad Core Intel Xeon
    ..to this:
    2 x 2.93 GHz 6 Core Intel Xeon
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME. I just need to narrow down the unwieldy list that can be found here: http://www.adobe.com/products/premiere/tech-specs.html

    MikeJamesG wrote:
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME.
    Are you adverse to using aftermarket cards that have been converted to work properly in a Mac?  If you aren't, then I'd recommend talking to Dave @ MacVidCards because he can cook you up an nVidia 700-series card that will boot properly in a Mac Pro, run at PCI-E 2.0 speeds, and work wonderfully in Pr/AME.

  • Inexpensive Dual-DVI video card for Cubase 6.5 & Adobe Premiere CS6, on Win7x64

    I need a card for both and I can't find one that is "approved" for both. Is anyone using these two programs together? I'm currently using a pair of ATI FireGL V3350 cards that, so far, play video fine in Premiere (haven't done any editing or AE yet) but not in Cubase 6. I'm not a pro so a high end card would be lost on me. An inexpensive card that can handle standard editing in Premiere with some AE, no advanced 3-D (titles only?), and will also play video in Cubase 6.5 is what I'm looking for.
    Thanks in advance

    hello, @ MD:  this should be fun:  i use Reason7
    in the general forum there is a thread about mulitple monitors
    some of the PPRO users here might get a kick out of this as well and/or have comments/advice
    here is most of it:
    CELTICDALE:
    Hi! I`ve been using 3 screens for 7-8 years on 4 different systems.
    This solution works on any system I can think of, laptop or desktop.
    Matrox TripleHead2Go (Digital Edition) (TH2Go)
    It works by splitting the signal from 1 DVI or VGA port to 3 screens.
    I just bougt a GTX690 which have 3 DVI ports, but I only use 1 with
    the TH2Go because it works perfect without any hassle. The beauty
    of it, compared to what others are suggesting, is that you can use
    this whith whatever system you have, and you don`t have to by a new
    solution (graphics card) if you upgrade. It`s external, so you can
    easily move it to another computer. There are no fans and it gets
    power from a USB port and use almost no power compared to an extra
    gfx card. I also still have to free ports from my GTX690, allowing
    me to add 2 more screens if I want.
    If you hook it up to a laptop, you can use the laptop screen + up to 3
    extra screens. I can run this on an 8 year old laptop I have, with no problems..
    People who are suggesting that DVI is getting phased out, are wrong.
    The worlds newest and fastest single GPU highend card comes with
    2 DVI ports (GTX780, and is released tomorrow)
    When I travel, it fits easily inside my laptop bag. Only thing I need
    extra is the cables and adapters to hook up to different types of ports.
    http://www.newegg.com/Product/Produc...82E16815106011
    http://www.matrox.com/graphics/en/pr...connect_video/
    The only way to go in my opinion...
    Good luck!
    PS. There are different models, with HDMI also, but I reccommend the
    model I linked to, as you can just go with adapter if you want to
    connect to HDMI and don`t need to send sound to the screen. In the
    rare cases I connect sound to the screen, I just use a minijack cable.
    But of cource, you know best what you need..
    hope this helps in some way, cheers, j

  • Which dual DVI video card for Mac Pro?

    We just got a Mac Pro at work with a single DVI port video card. Want to use 2 monitors, but don't want to order an incompatible card. Don't need screaming performance, just a stable setup for a sprawling desktop with some applications running low-res/low-frame-rate animation.
    One Evga card that looked like about the right specs was shown on MacMall's site as 'platform: universal' but the manufacturer's site specifed Windows and Vista. Called MacMall and tech support said it wasn't supported. So, now I'm suspicious.
    Anyone have a list of decent cards that will work? Would like to keep it at or under $100.

    You could just add an adapter, though not everyone is happy with that, for your 2nd port on the GT120.
    Could wait for Nvidia eVGA GTX 285 Mac Edition next month.
    http://eshop.macsales.com/item/EGVA/01GP31080TR/
    There is/was and should be 8800GT with nice specs and dual monitor support.
    Barefeats is a great resource of tests and benchmarks.
    This gives a good idea of what cards and what to expect:
    http://barefeats.com/nehal10.html
    Some discussions of 4870, GTX285 etc.
    http://forums.macrumors.com/showthread.php?t=705291
    http://forums.macrumors.com/showthread.php?p=7546575#post7546575
    http://forums.macrumors.com/showthread.php?t=694042
    And some comments on the FX 4800 and using in Windows vs OS X:
    http://forums.macrumors.com/showthread.php?t=705457

  • Best dual DVI video card for 2009 MP running Windows

    Sorry if this question has been posted before, or if I'm in the wrong forum. I searched the Windows Compatibility forum and didn't find the answer.
    I have a 2009 Mac Pro (8 core) running Windows Server 2008 64 bit. I would like to upgrade the stock GT120 video card. I don't play games on it, but I do need to drive a pair of 24" widescreen LCD monitors at 1920x1200 or higher and extend the desktop onto the second monitor.
    I see that the 8800GT (Apple part MB137Z/A) is still available, although Apple is pushing the ATI 4870. Does anyone know which of these cards would work the best with Windows?
    Thanks!

    Thanks Hatter. I thought the video card had to have special EFI firmware in order for the Mac Pro to even recognize it as a video card (regardless of which OS's are installed).
    Are you saying that if I'm only running Windows, I can use ANY PCI-Express video card? Sweeeeeet!
    Now, for cards that ARE available in a specific Mac version (such as the GTX285 and ATI 4870), are they as well supported in Windows as they are in Mac OS (from a driver point of view)? I suppose other than the MAC-specific firmware, the graphics chipset for both versions of the card are the same, therefore the drivers should be the same.
    Thanks for your help.

  • ADC/dvi video  card

    Is it possible to get a ADC/Dvi video card for an open PCi X slot? or would I be better off getting a card w/2 dvis and purchasing the adapter because it is older technology? I have an older 23" display.

    A PCI slot wouldn't have the extra connector that provides the display power, so ADC cards are only made for AGP slots.

  • Best video card for my mac

    Hey,
    I just need help finding the best video card for my Powermac g4 fw800. One that my system can use fully. I currently have a Radeon 9000Pro with 64MB. Thanks
    ~R

    Hi
    The ATI 9800-256MB is currently the best card for your system. Actually, there are no other NEW video cards available.
    BTW, xlr8yourmac hasn't done a video card review in years, they are just a bulletin board/newsletter now. If you are interested in seeing current testing of available video cards, check out:
    http://www.barefeats.com/rad98pro.html
    Regards,
    Dave

  • ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

    I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
    I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

    A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
    from: http://en.wikipedia.org/wiki/HDMI
    You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

  • Upgrade video card for Late 2005 PowerMac G5

    I am looking for an upgrade video card for a Late 2005 PowerMac G5, which has the PCI-Express slots. I need at least 256 MB of VRAM.
    Since this computer is a discontinued model, there doesn't seem to be too many options for video cards. I've seen some cards like the NVidia 6600 or 6800, or even ATI's X800, but they appear to be difficult to find.
    The one card that is readily available still is the ATI X1900, which looks great, but a little on the pricey side ($349).
    I did notice the NVidia 7300 GT, which is more moderately priced ($145), but it only mentions being an upgrade card for the Mac Pro. Will this also work with the PowerMac G5 (Late 2005) model? I would hate to buy this video card and then find out that it won't work.

    The only available upgrade card for the Late 2005 G5s is the X1900GT (aka G5 Edition). It's basically on par with the nVidia 7800GT that was available as a BTO option.
    You can get the 7800GT and QuadroFX 4500 as replacement parts, but they're exorbitantly priced.
    The Mac Pro cards won't work (even though they're also PCI-Express) due to the ROM on the card. It's only setup to work with the Mac Pro's EFI boot system and doesn't have the necessary code to work with the PowerMac's Open Firmware boot system.

  • ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

    We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
    Many thanks,
    Philip

    The Nvidia 7800GS is a flashed card, runs a 30" with ease.
    BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
    He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
    There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
    There are also flashed 6600GT AGP cards which will work, but harder to find.
    Any of the above 3 will run circles around a 9600.

  • Can I replace an ATI RADEON 9800 PRO-(256MB)-MAC EDITION with Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5

    Hi,
    I am trying to help a friend whose graphics card has bust.
    The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
    I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
    Can I just swap them over?  The connectors are not identical according to the photographs.
    Thanks.

    I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
    I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
    I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
    eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced  when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
    Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
    Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
    At the time of writing, the display has been up and running for a couple of hours and all seems fine.
    Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs.

  • Best video card for G4 tower?

    What's the best video card for my G4 tower without breaking the bank?
    I have the dual 500nhz, 2GB ram, OSX 10.4.
    I currently have a nVidia Gforce64mb with a small fan.

    No you're OK...
    There is DVI-I, DVD-D, & DVI-A, DVI-I contains both DVI-A & DVI-D, HDMI uses DVD-D, (Digital), so it can connect to DVI-I or DVD-D.
    Those 4 holes are only used for DVI-A, (analog).

  • Dual Monitor video cards for HP Pro 3400

    I am looking to add a 2nd monitor to my HP Pro 3400 MT and want to make sure I get a video card that will not have any compatibility issues.  I'm not doing any gaming so I don't think I need anything super fancy and I would prefer not to have to upgrade the power supply.
    So my questions are:
    Is the HP Pro 3400 MT compatible witha PCI Express 3.0 card?  2.1 ?
    How much power draw from the video card would require me to upgrade the power supply (my PC is stock, no added peripherals).  Is there a way for me to determine how much is being currently (no pun intended) drawn?
    Are there any drawbacks to usnig the built-in video card for 1 monitor and a new, single-ouput card for the other (vs a dual-output card) ?
    Anything else I need to consider when deciding on a new video card?
    Thanks.

    Hi,
    You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Which video card for Aperture and dual monitors?

    I have a G5 dual 2.0 with a GeForce FX 5200 video card that is driving one 23" Cinema display. I need to upgrade my card per the specs to run Aperture. I have also been thinking of getting a second 23" display. Can someone recommend the best video card for me. I know very little about video cards and have been reading a lot this morning. Thanks,
    Dave

    Hi Dave;
    No. PCIx and PCIe or PCI Express are not the same thing.
    PCIx is an extended or slight sped up version of PCI. While PCIe is a switched bus structure instead.
    Hence they are not the same. That is what all of the big news is about Apple has made the leap over to PCI Express.
    Allan

Maybe you are looking for

  • How to get total button number in a application

    my application: <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx=" http://www.adobe.com/2006/mxml" layout="absolute"> <mx:Button x="120" y="43" label="Button" id="a"/> <mx:Button x="231" y="43" label="Button" id="b"/> <mx:Button x="349

  • HANA Studio: Filter more than one catalog schema

    Hi, Simply a usability question: Is it possible to filter a list of schemas in the catalog folder of HANA studio. I see only, that I can filter one pattern of a schema name. I would like to reduce the visible schemas in the catalog folder according t

  • Trusted Sources

    When using digital signatures in Acrobat Pro and Reader 9.3 ... is there a limit to the number of trusted sources you can have in your application?

  • After Effect 7.0 no longer opens

    We seem to be going around in circles. I have AE 7. not CS2 This page is all about CS2: http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-act ivation-end-life.html Which link should I follow to get the new serial number ? I have AE 7

  • CS4 on my new iMac?

    Just purchased a new iMac 10.9.2 I transfered all my data from the old mac to the new including CS4. Now I can't run CS4 because of an error 150:30 "Licensing for this cproduct has stopped working" How do I make my software work again on my new compu