DVI video out to component

Hello!
I was recently looking for something to send DVI to video (and not have it be a $3000+ box)
I found the following:
http://www.gefen.com/kvm/product.jsp?prod_id=3176
Is this something that would work out of the stock ADC/DVI card that comes with the dual 2.5 g5? If so, I'm using a 23" cinema display at 1920x1200, and was wondering if this would literally scale from 1920x1200 to 1920x1080 if I was sending it into my editing board.
Thanks for any help anyone might be able to provide!

Forrest,
Thanks for the info!
I looked up the details and its the Radeon 9600XT, which the specs page says DVI-I, so it looks like it'll work!
Would you happen to know how it'll handle the varying resolution? Scaling most likely? I've found that our RGB to RGB wires around here always tend to scale depending on the video hardware, although i've never dealt with a DVI or similar connector and was just curious if the wire's smart enough to stretch it to the standard 1080i we're taking in.

Similar Messages

DVI video out suddenly not working.

That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.

there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc.

Mac-Mini HTPC Video-Out Problems (Component to DVI)

I recently decided to go with a Mac-Mini as the central-brain of my HTPC configuration, and I was immediately halted in the process of getting things working by my inability to properly output video from the Mac-Mini such that it's even visible on my 50" Plasma TV (Panasonic TH-50PHW3).
Neither of my A/V Receivers (Denon AVR-3805 & Denon AVR-2805) have HDMI inputs, but both of them have component video inputs for HD content, so I purchased the DVI-to-Component cable linked below to use for outputting video from my Mac-Mini to the Denon:
http://sewelldirect.com/DVI-to-Component-Adapter-Cable-6ft.asp
Needless to say, nothing I've tried has been effective in my Mac-Mini being displayed on my Plasma TV??
Any thoughts?

From other threads I see that others have tried and failed at this. The adapter cables don't work with the Mini (or other Macs as far as I know). Apparently you need a "transcoder" box. It will apparently take the DVI port's RGB signals and convert them to Y-Pb-Pr component signals.
The transcoders can also cost a couple hundred bucs. Check out some of the discussions at http://www.avsforum.com/avs-vb/showthread.php?t=824143
Here is a relatively cheap one that seems to work: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=63079 2&CatId=1430
Other option is to go with a S-Video adapter http://store.apple.com/us/product/M9267G/A but you will loose resolution.l
Message was edited by: Saul in PA

Is there a COMPONENT video OUT solution for the iBook?

I am currently using Apple's Video Adapter (mini-VGA to S-Video) to hook up to my widescreen. Let's face it, S-Video *****. I am trying to find a solution that would allow me to get component video out of my iBook and run that into my widescreen.
Is there a VGA->Component Video Adapter available that would work with the mini-VGA -> VGA adapter that ships with the iBook? (Or some other way to get a component video signal?)
Thanks!
iBook G4 1.2GHz Mac OS X (10.4.3) 1.25 GB RAM

Hi Mactivist,
i am not an expert on this video stuff but I think
you might find this useful. Although the
procedure described is about a Mac Mini (which has a
dvi connector) the guy actually used a DVI-VGA
adapter. Therefore, I believe, the set-up described
should work for you too.
-Petra
Unfortunately, iBooks do not have DVI out. What I really need is a VGA to Component video adapter.
And for the person who wasn't sure what a component video cable looks like, this is a cable that has 3 rca-like plugs on it, each one supplies a different color (RGB I think).
So far, I've not found a VGA adapter that can do this unless you are using an ATI video card as the source.
iBook G4 1.2GHz Mac OS X (10.4.3) 1.25GB RAM

Intel iMac Component Video Out

Has anyone tried a component video out connection to an HDTV from the Intel iMac? I've read from the ATI website that the new Radeon X1600 card supports component video out with an adapter.
There was never a really good way to do this with previous Mac models.

A little more news about component out from the Intel iMac 20"
The VGA adapter included with my 12" iBook does not fit the mini-dvi port on the iMac. So you need to buy a new adapter from Apple.
Also:
I tried using a VGA-to-component cable with the iBook VGA adapter and a standard television set. The cable is designed to interface a component-out DVD player to a VGA-in BenQ projector. I ran the cable to the component-in jacks on my Sanyo (analog-non HD) television. No go. Tried several resolutions and adapter refresh rates, and got some smeared video, but it made me nervous and I stopped experimenting. Haven't tried this cable with my HDTV for fear of damage.
Basically, the cable was meant to take a video signal from the DVD player to the projector. My experiment was mac to TV.
So sad, oh so sad ;<
Regards,
Gene

Power Mac Mirror Door DVI or ADC to SINGLE RCA VIDEO OUT to a TV...adapter?

I have a Mirror Door G4 tower that I would like to use as a media center, with an old(er) Magnavox 19" television that only has the single yellow VIDEO IN jack, and the red and white audio L and R. Is there a converter cable that is similar to the one I used to use with my old G4 Powerbook which took the mini DVI and turned it into either composite video out? (I think it was Mini DVI, maybe ADC, whatever that little square video out on the Powerbook G4). I am prepared for low-res results, mostly just want to look at the itunes window and occasionally view utube clips or DVDs.
Also, does the G4 take the original Airport card (not the extreme), and if so does it need a separate antenna the way some G5s do?
And finally should I get good results with a Bluetooth dongle plugged into a USB port on the rear of the G4 when connecting a white Apple wireless keyboard?
Some of these answers will of course sort themselves out with experimentation, but any tips or experience in doing these things would be greatly appreciated.
Thanks, m.

I expect the weasel-words in Apple's description are there to be sure that whatever Video card you choose, the card does actually provide the signals needed. These are the VGA-equivalent signals around the Bar at one end of the connector. That gets you Red, Blue, Green+Luminosity, H-Sync and V-Sync. Those signals in combination are all that is needed to build S-Video or Yellow-RCA composite video On-the-Fly (not buffered).
The signals can be sliced and diced to get slightly different versions of Analog Video using adapters built around the SKART interface. There is a cheap one-chip wonder converter used in lots of converters, also loosely called SKART.
http://en.wikipedia.org/wiki/SKART
This does NOT do conversion to Digital Video, DVI, or HDMI when starting from VGA. That kind of converter has memory and scanning hardware that pushes the cost up higher than the price of an display card.
Message was edited by: Grant Bennet-Alder

Macbook Pro DVI and Video Out woes..

Hey, this seems to be a known issue although specifics are difficult to nail down. I've had my macbook pro since shortly after they were launched and been using the DVI - S-video adapter since day one, and it's been outputting to all TVs with no problem.
I recently got a nice overtime payment from work and decided to treat myself to an external 24" display, was very pleased with it when it arrived. Plugged it in downstairs, and ran it for a few hours, putting it through its paces - worked great.
Decided to move the whole arrangement upstairs and 'no input signal' said the monitor, the MBP just didn't detect anything in the displays. The built-in display did it's blue screen when the cable was plugged in, so it's definitely detecting something.. The monitor is connected via a DVI-D single-link cable. I've confirmed that both cable and monitor work using a different computer.
So after this happened, I decided to try plugging it into a TV again to see if the S-video out worked and although Displays picks up the TV and everything is as usual, nothing is shown on the screen.
Any suggestions would be very welcome before I get my hammer and remodel my computer!
Anyone else suffering from something similar to this?
The monitor is a 24" Yuraku YV24WBH1.
Cheers.
PS I've tried booting from the install CD, two versions of XP bootcamp (one with standard drivers, one with Catalyst, and the computer's old HD with 10.4 installed on it - no joy with any)

Another update, I did some research and it seems that ATI are cagily admitting to the fact that there might be a problem with the X-series;
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=26586
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=21266
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=25682
You'll notice that ATI tell you to contact the manufacturer of your computer if the graphics are integrated into the motherboard. Like with Apple. Much joy to be had there.
I phoned their technical support and got talking with a specialist who was mystified and suggested 'turning off the airport'.
Also, it seems that Apple rather significantly "underclocked" the GPUs in their macbook pros;
http://www.reghardware.co.uk/2006/04/19/applemacbook_pro_gpuspeed/
http://www.maconintel.com/news.php?article=178
http://forums.macrumors.com/showthread.php?t=306024
http://forums.macrumors.com/showthread.php?t=194647
Could be running the GPUs are running on a lower voltage and maybe they're not working right, or the signal isn't stable enough to pick up an EDID? It seems to be quite a mystery. Perhaps the osx86 community will have some tricks up their sleaves for twisting the x1600's arm. Still doesn't explain why the monitor worked that one time.
This probably isn't an issue for anyone who doesn't want to plug their laptop into an external display, but I suspect it's a widespread problem just waiting to rear its ugly head, especially as HDTVs become more ubiquitous.
Anyone else struggling with external display devices, or with solutions, I'd appreciate your input.

IPod Touch 2nd Gen Video Out Problem with Apple Component Cable

I'm trying to get video out working with my iPod touch connected to my TV. Here's the information.
32 GB iPod Touch 2nd Gen
Apple Universal Dock (current version.)
Apple Component Out cable for iPod (current version that connects with a dock connector.
I've connected the component cables into the component video input on my TV. When I start playing any video (purchased off iTunes store in Standard Def,) I get a scrambled picture that appears to be the video, and no sound. I purchased the TV in South Korea and haven't gotten to test it yet on a TV back in the US. I have my video out settings with wide screen turned off and set to NTSC (South Korea uses NTSC.) I've also tried every setting combination, and switching the cable connections with the same or similar results. Sorry if a similar problem has been posted elsewhere, but after searching, I couldn't find any similar behavior. Any ideas on what might be the cause? I don't have any other component devices to check if the component on the TV is bad.

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Video out, dvi, apple vga? , help me

i ahve a pb g4 12" 867mhz,
i want to buy a video out cable, but i notice that my port is different from several friends who have the 1.0ghz model g4 12",
can someone link me to a website with what i need?
or am i even able to buy the older cable?
thanks,

This Apple mini-DVI to Video adapter should work for you.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=7E4 EB91E&nplm=M9319G/A
It has an S-Video connector and a Yellow RCA composite video connector on it. With these 2, you should be able to hook up to any tv.
-Andrew

Video out settings HDMI and Component out run at the same time?

Does anyone know if I can get video out of both the HDMI port and component video connections at the same time. Trying to distribute video throught the house on component, and still get HD on the flat panel in the living room. Any help would be greatly appreciated.

Apple says when both HDMI and component are connected, HDMI will take precedence over component. Short answer: no.

Mini-Dvi to Video out from Final Cut Pro working

Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
It's working fine.

@ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
@ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

FX5900 Problems with S-video out

I've been trying to get a signal to my miniDV video camera, Cannon Optura PI, through S-video cable. Here's what happens:
1. Monitor connected to VGA, Camera to S-video out - Camera goes black when windows loads.
2. Camera only connected to S-video out - It works fine on camera, full color.
3. Leave camera plugged in, reconnect monitor to VGA - Now monitor goes black when windows loads.
How can I get both the camera and the monitor to work at the same time?
As a test I hooked an LCD projector to the DVI out. I was able to get the projector and the monitor to work simultaneously. S-Video wouldn't work at all with the projector.
I've used MSI live update to ensure all my drivers/bios are current.

I bought two of those cards on eBay when I was looking for a second Video Card for some Video Editing systems.
The largest chip in the Component side of this PCI-slot card has the ATI-3D logo, and characters below call it RAGE LT PRO AGP. A chip nearby has a paper label that says: LTP 328 and 54104. PN 109-54100-00 is silk screened next to the ATI logo on the corner.
There is also a 20-pin rectangular connector labeled "DEF". I have never seen display gear that plugged into that. Any ideas what that one is?
These cards worked great (off the VGA connector) in Mac OS 9, But OS X 10.3.9 would not deal with them except in 256-color mode.

How can I determine the type of video out connector I need?

Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon T

Thanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T

Video Out from early 2009 Mac Mini

Is there any way to go from one of the video outs on the Mini to a converter of some sort, then to video input or S video input on a TV monitor? I see that the Mini DVI to Video does not work with my version of the Mac Mini. Any other solutions?

Grant Lenahan wrote:
The additional pins do little. A DVI-I plug will work with either.
What do you think wont work?
A DVI monitor will work on DVI or DVI-I.
A DVI-I monitor will work on DVI or DVI-I
Dont believe me? Try it ( or read the spec).
Grant
You commented as to why make the special connector. I gave an answer based upon the original question to this post which is about +_getting a analog composite video or S-video signal to a Mini, NOT a DVI monitor_+.
Apple makes and sells an adapter to provide composite and S-video from the DVI connector of certain Mac models of Macbook Pro and Mac Pro. (I use one.) But since the Mini does not produce the analog signals, the adapter will not work, even if you could physically plug it in to the Mini. So if Apple did as you say and made the computer with the connector to use either a DVI-D or DVI-I adapter, in my example, if the aforementioned person with lesser technical knowledge plugged in the S-video connector to the Mini, they'd be angry that it didn't work. Again to avoid the "Why would Apple sell something that wouldn't work on my computer if it fits?!" type of support calls.

Video out to hdtv

i'm using mini-dvi to s-video, and outputting to a Panasonic somethinsomethin HDTV. However it's only outputing from 640-480 up to 1024-768
is there any way to get widescreen output out of the video out? do i just need a different connector?
i know the screens native resolution is 1280-800, just like the display on my macbook

hey there Eminemily,
does the desktop image fill the screen? if not you may have mirroring turned on, if this is the case turn it off. i get full screen desktop image on a 26" Olevia LCD widescreen w/ S-video @ highest rez available for a TV output(forget what rez is).
try this: System Prefs.>Displays>Detect Displays>Gather Windows, turn off Mirror>Set Rez for TV. i get 1920 x1080i w/ mini DVI>HDMI on my Sony 42" LCD Poj. HDTV & w/ mini DVI>DVI on Philips 23" LCD HDTV Monitor, nice for watching DVDs & QT HD content from Apple's site.
good luck.

DVI video out to component

Similar Messages

Maybe you are looking for