DVM metrics grey status after SPS12

Dear colleagues,
After SPS12 implementation in System Monitoring DVM metrics has grey status and message:
DPC: No data retrieved from provider E2E_DVM_ALERTS
I tried to re-run DVM setup scenatio but no changes appears.
Could you please help me to resolve this issue?
Thanks a lot,
Alexander

Dear Divyanshu,
I checked extractors and found extractors with errors:
DVM Analyses Scheduler (Saving Potential) - Source RFC Destination not maintained
DVM Size Statistics Extractor (DBCON) - NO_APPLICABLE_DATA
Then I checked notes and found all notes implemented in system already.
I tried to delete extractors and re-setup DVM scenario for system but no changes appears.
Do you any idea?
With best regards,
Alexander

Similar Messages

Failed ABAP Transports metric has grey status

Dear colleagues,
in System monitoring I found Failed ABAP Transports metric has grey status. Then I checked Data Collection Status and found:
Log for mainextractor E2E_DPC_PULL_CORE has 14 warning(s) for the last 180
minutes.
In log I found:
Metric
005056B62E9D1ED1A7D246512DA45A0D/506A27FD986B4161E1008000AC100BB8 - Status: Data
Provider E2E_CONFIG_VAL : E2E_CONFIG_VAL: ABAP_TRANSPORTS;16.04.2014 05:03:45
-16.04.2014 06:04
Thenh I tried to use E2E_DPC_GET_DATA_CHECK
and found
Could you please help me to resolve this issue?
Thanks a lot ,
Alexander

Hello Aleksandr,
Please chek following notes according to your Solman version:
1975717 - ST710, SP10,11 System Monitoring 'Failed ABAP Transports' gray status
1792776 - ST710, SP06 System Monitoring 'Failed ABAP Transports'
BR,
K.

All options are greyed out after i Click on Apply Maitenance

Hi All,
I am upgrading our EPM system from 11.1.2.1 to 11.1.2.2. I have downloaded all the required files from e-delivery.oracle .com and unzipped them. I selected Apply Maintenance and when i clicked next all the options are greyed out. I am not sure what i have done wrong. I am using the same user ID which was used for installation of hyperion 11.1.2.1.
Kindly help me out.
Find the screenshots at my blog.
http://hyperion-consulting.blogspot.in/2013/01/all-options-are-greyed-out-after-i.html
Regards,
AS

From your screenshot it says that 11.1.2.2 Foundation has been installed when it should say 11.1.2.1 like this - http://2.bp.blogspot.com/-J_9A8U41JS0/T5WXO3JQtxI/AAAAAAAAEj8/0nqcNdo1bFQ/s1600/image022.png
Also you should only have the option to "Apply maintenance release" like this - http://1.bp.blogspot.com/-1zQHVCODSr0/T5WXNLQN4YI/AAAAAAAAEj4/vNQ_vOT03_8/s1600/image021.png in your screenshot you also have the option to Re-install the release.
Are you definitely sure the environment has had nothing applied to it.
Cheers
John
http://john-goodwin.blogspot.com/

IPhone is at a grey screen after flashing for a few minutes

My iPhone is at a grey screen after flashing at the same screen for a couple of minutes.
I can turn my screen on and off, phone functions and siri both work. The screen is just grey, no error messages or anything.
This happened after I was trying to connect to a wifi hotspot and I was typing something into a field when it froze, flashed for a few minutes, and stayed on a grey screen. This has been going on for about an hour and a half.
Any help would be greatly appreciated.

Hi Brialex119,
If your iPhone is flashing with a grey screen, I would suggest resetting the device and resetting the network settings. If that does not resolve the issue, then you may need to back up to iCloud and restore it.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201559
iOS: Wi-Fi settings grayed out or dim - Apple Support
https://support.apple.com/en-us/HT204324
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
https://support.apple.com/en-us/HT203977
Regards,
- Judy

Goods Receipt Indicator (WEPOS) in grey status

Dear GURU,
I need your support for the issue in object.
For services item Goods Receipt Indicator (WEPOS) in the Delivery tab is in gray status and is not possible to change this.
Why this field is in grey status? Do you have any idea for changing related setting? Is possible to manage this through the corresponding customizing settings.
Best Regards
Giuseppe

Dear Patra,
in the account assignment this value was deactivated, the system working fine for material and not for service Item.
Probably is possible to apply the SAP Note 441371 - MM-SRV: Standard entries in T163 but I'm not sure what are the impacts.
Do you have any idea?
Best Regards

My IPad screen is grey even after I tried pressing the sleep and home button for reboot but turns out it stays grey.

My IPad screen is grey even after I tried pressing the sleep and home button for reboot but turns out it stays grey.

You can try to reboot a few more times. If it doesn't come back and you normally sync to a computer, hook it up and see if the 'guts' are working even if the screen isn't.
Beyond that you should make an appointment at your local apple store and have them check it out.

Change material status after creating SO

Hi Guru,
i have created a sales order with material 'DCC001'.
after creating the sales order the STATUS of material 'DCC001' should be 'Sales not allowed'.
but, when i am checking the status of that material, its showing blank in field 'X-distr.chain status' which is in tab 'Sales: sales org. 1'.
Please tell me how can i change the status after creating SO.
Thanks & Regards
Sohel

Please post in correct forum..

Project pane greys out after adding either HD movie footage or a photo'

Project pane greys out after adding either HD movie footage or a photo' into iMovie '08. Since using a HD camcorder, quite often, after adding either HD movie footage or a photo', the project pane greys out. I have to exit the project and re-enter to continue viewing the project; this is tiresome. Any thoughts or is this yet another iMovie '08 bug?

blackcomb greens wrote:
PS ~ what is the plist?
every app as a preference list, which can get corrupted.
quit iM
look in user/Library/Preferences for a file called com.apple.iMovie(x).plist (x stands for any number) ....
trash that.
restart iMovie..
it doesn't hurt your projects nor does it touch any files.. it just 'resets' an app.. => slapp on backhead.. as I like to call it..
yes, hardware is nice, as long as you don't dare to handle AVCHD .. that is on Intel Mac only..
all Folders (Project/Events) is on local harddrive?
no plug-ins installed (DivX etc)?

SIA in stopped status after installation of SAP BO BI 4.0 SP02 Full Build

SIA in stopped status after installation of SAP BO BI 4.0 SP02 Full Build Version
Regards
Kapil

Hi Kapil,
Please post your question in the SAP Business Objects Administration.
Here you can only post questions to Integration Kit.
I think the installation of the default CMS database provided with BI 4.0 i.e SQL Server 2008 Express Edition was not proper.
Go to CCM.
Go to SIA Properties and select the Configuration tab.
Click on the option Specify for CMS database.
Repoint the CMS to any other available 64 bit Database.
Start SIA.
If the SIA starts then that was the issue.
Please post in the proper category for further assistance.

Mavericks grey screen AFTER login on MBP?

Hi there,
I've bought a new MBP 13" Retina w. Mavericks installed (december 2013).
It ran like a dream, but when I tried to login via the guest account (for the guest time), it seemed to not go anywhere - freezing (w. the spinner still circling).
I held down the powerbutton until it powered up.
After this, i get to the login screen (w. mine + guest login), but nomatter if I log in as guest or my normal account i end up w. a blank grey screen after.
I've rebooted many times and tried resetting the PRAM, but with no improvement (as the "start process of the boot" is fine, until after the login).
There are no USB's or external things connected.
Any ideas? I did of course not have full backup :-((
Thank you in advance!!

Try booting into Safe mode (hold down shift while you start up). This takes five minutes to do a Dsik Utility (Repair Disk) then shows a special login screen and demands your username and password.
You can poke around and make sure things look ok. A few things are slower in safe mode, as only the most essential Drivers are loaded.
When you re-boot into regular mode, the start up may take a little longer as it rebuilds a few more things. Let us knoiw if that helps of not.

Jco destiantions are with greyed status in webdynpro content administrator

Hi All
In webdynpro content administrator of BI System all the jco destinations are displatyed with greyed status,even i tried to create new destination with any name the message comes use another destination,it is already used in sld.the connection to sld is working fine.i am using the user as j2ee_admin.
kindly help me out.
Regards
Pranav

Hi Pranav
If the SLD is working fine then you need to check the below thing :-
1. Check the SLD Data Supplier in the Visual Administrator and update the correct information and test it.
2. Update Host and service file for server in the server system for jco destinations visibility.
Refer to [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?quicklink=index&overridelayout=true]
Hope it will helps.
Best Regards, Arun Jaiswal

Why is my diabled login greyed out after i unlock it? I have tried to remove the library file but it doesn't work

Why is my diabled login greyed out after i unlock it? I have tried to remove the library file but it doesn't work. It worked the first time and than all of a sudden it was greyed out.

Where do you see a disabled login? In system preferences? In Login screen?

What does it mean when you get an Apple and a grey status bar during start up of a MacBook Pro?

When I start up my MacBook Pro I get an Apple icon and a grey status bar. Some days the start up goes really fast and other days it takes a few minutes for the computer to start up. My laptop never used to do this. It started a month ago. Is there something I should do to resolve this? Below are my computers spec's:
OS X Yosemite V 10.10.1
MacBook Pro (15-in, 2.53GHz, Mid 2009)
Processor: 2.53GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Start up Macintosh HD
Any help someone can provide me would be greatly appreciated. Thank you in advance!!

The boot progress bar with progress bar with a dark background is a new feature for Yosemite and appears for seconds before the desktop loads. It is normal that "some days it goes really fast". Yosemite is heavier than Mavericks and as a result the boot time is slightly longer. On Mavericks it was a little wheel that spun, now it is a progress bar.

My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal.

My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal functioning. I have adjusted the delay times before the computer goes to sleep to no avail, so I'm thinking this issue stems from something else.

Have you tried resetting the PMU? The PMU (Power Management Unit) has control over the sleep function, so resetting it may help if the iBook is sleeping unexpectedly.

Stuck at grey screen after reboot

I seem to be stuck at the grey screen after a reboot of my server. Here are the symptoms and I'm wondering if anyone has experienced them before or has some idea of where to look:
1) Over the last couple of weeks, I've noticed the entire system freezing up for 10-20 seconds. The spinning pinwheel pops up and when my office is really quite, it sounds like either a fan is starting on the system or a hard drive is spinning up. Note that I've turned off all 'spin drives down when possible' in energy savings.
2) After the 10-20 seconds, a bunch of disk activity occurs and everything goes back to normal.
I've tried repairing permissions, checking for errors with the drive, etc. I've got two drives striped in Raid 0 (yes, the system is backed up--so I'm not worried about loosing data).
After a recent software update, I had to reboot it, and that's where it got stuck. Could be something there for some time, but my server usually runs for months at a time, unless an update requires a reboot.
Thanks for any help or suggestions!

Could you be more specific about what disks you used to boot with and exactly what programs you ran...
I cannot seem to get it to boot from the "Admin Tools" disk using the "D" key.
Also, when booting from the "Mac OS X Server" disk I can access Disk Utility, but do not see Raid Utility anywhwere.

DVM metrics grey status after SPS12

Similar Messages

Maybe you are looking for