DVORAK keyboard layout on Macbook Pro

Does anyone know if the keycaps pop off easily on the Macbook Pro as they do on the Powerbooks so I can arrange the keys in a Dvorak layout? Thanks.

As for popping off keys to re-arrange them, according to this post (scroll down to Randall Jenkins' post), it can be done. Just use a small screwdriver and pry the keys off carefully.

Similar Messages

  • KeyBoard Layout on Macbook Pro

    Hi I have one of those silly questions regarding keyboard layout. I have picked up a 2010 Macbook pro (first mac I have had) that had been purchased overseas. It is absolutely in immaculate condition but the layout of the keyboard is a bit of a pain. I can map it to the Australian layout but because I am not a touch typist it becomes slow work. So what I would like to do is map it and get some of the keys replaced to suit. Is the possible and any body have an idea of cost.
    Also the Apple website tells me I have about 9 months left on the warranty does it matter if it was purchased overseas (i do have the receipt).
    Thanks

    Contact an Apple retail store directly yourself and ask if they can make a special order for you.
    http://www.apple.com/retail/storelist/

  • Is it possible to build a German keyboard in an MacBook Pro in US?

    Hey Guys,
    I'm thinking about buying a MacBook Pro. I have lots of german friends and they use a different keyboard.
    I looked at the online store but I could not find, how to build a german keyboard in the MacBook and I really would like to have a german keyboard in my MacBook Pro.
    Do you know something about it or is it possible?
    Thanks for helping
    An4stasia

    What you can do is set the keys to German layout in preferences and then get something like this
    http://www.kbcovers.com/servlet/Detail?no=218

  • Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    Try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Resetting network settings: Setting>General>Reset>Reset Network Settings

  • How do I get the keyboard on my macbook pro to light up?

    how do i get the keyboard on my macbook pro to light up?

    Welcome to Apple Support Communities
    What MacBook Pro have you got? Only Unibody MacBooks Pro (Late 2008 and newer) have a backlit keyboard. If you have one of these MacBooks Pro, you can set up its illumination in System Preferences > Keyboard. See > http://support.apple.com/kb/ht4882

  • Wireless keyboard for my macbook pro function keys dont work?

    I bought a wireless keyboard for my macbook pro and the function keys such as play/pause will not work and yes i have turned the all keys thing off and went through the other keyboard things to try and resolve this problem
    Any help appreciated here

    I bought it for me my screen cracked on the pro and have it hooked up to another screen

  • Hello! Does anyone knows if its possible to change a US keyboard of a macbook pro for a portuguese keyboard. And how much it is approximatedlly. Thanks

    Hello! Does anyone knows if its possible to change a US keyboard of a macbook pro for a portuguese keyboard. And how much it is approximatedlly. Thanks

    Welcome to the Apple Support Communities
    You will have to return the Mac and order one with a Portuguese keyboard, if you bought it less than 14 days ago.
    If not, you will have to buy a new Mac (that's because some keys may not fit onto your MacBook Pro keyboard) or just set up OS X with a Portuguese keyboard but with US keys

  • Spilled water over the keyboard of my MacBook Pro.

    Spilled water over the keyboard of my MacBook Pro. 13 inches. Used paper and dried it straigt away, it was working fine. Now, a few days later, my left shift-button, the ctrl-button and right-arrow button do not work. What can I do to try to fix this?
    My Mac is working completely fine. It was maybe 0,5 dl of water...

    Nothing that you can do to fix it. Best to just leave it off and take it to your local Apple Store or AASP. No telling how much it's going to cost you - there are liquid sensors all around your computer so the service centers will be able to tell that it's a case of liquid damage, even if there is no corrosion yet.
    You just have to be careful with any kind of liquids around notebooks - liquids and electricity just don't play well together.
    Sorry,
    Clinton

  • Dvorak Keyboard Layout

    Is there a Dvorak keyboard layout available for the iPhone?
    While I touch type on the standard QWERTY keyboard, I find the Dvorak layout much better suited for typing with my thumbs.
    Who do I ask for one if there isn't one now?
    Thanks,
    Byron

    Byron C. Mayes,
    You are welcome to suggest it on the feedback page the link for the iPhone is:
    http://www.apple.com/feedback/iphone.html
    However, speaking personally, I would think the reasons for the way QWERTY is laid out might be valid on the iPhone. QWERTY is laid out the way it is so that letters that are likely to appear together in English are separated to avoid accidental keystrokes.
    Hope this helps,
    Nathan C.

  • Final Cut Keyboard Template for MacBook Pro

    I saw a rubberized FCP keyboard template that overlays the keyboard on a MacBook Pro, but can't remember where I saw it... Has anyone seen one? I might have seen it in a UK publication...
    Thanks,
    MacBook Pro   Mac OS X (10.4.8)  

    Is this what you were looking for?
    x

  • Change keyboard on a MacBook Pro

    Hi there
    I currently live in Hong Kong and I'm thinking about buying a MacBook Pro here.
    Someday I will move back to Switzerland and I was wondering if it's possible to change the keyboard on a MacBook Pro so that I can write german umlaute with it and how much that would cost me.
    I know that it's possible to configure the keyboard so that I can type the umlaute with a key-combination, but it would be nicer to just have the actual key on my keyboard.
    Thanks for your help.

    The keyboard and trackpad are fused to the topcase and cannot be replaced individually. Hence, it would require entire replacement of the part, an expensive proposition that needs to be carried out by trained and authorized technicians with the proper tools and knowhow.
    If the key shapes for both languages are the same and the difference just lies in a few keycaps, you may be able to fudge the "replacement" merely by popping put the caps that change and replacing them. See here as a possible source: http://www.replacementlaptopkeys.com/
    From the OS and program point of view, you just need to select a different keyboard in the Input Methods found in System Preferences / Language & Text.

  • Logitech diNovo Mac USB Wireless Keyboard - Wake Closed Macbook Pro?

    My brother wants to use his Macbook Pro 15" 2008 (previous body style) in a "dock" setup with an external monitor. This keyboard uses a small wireless USB dongle to connect to the keyboard. With Macbook pro cover closed, I cannot get the DiNovo's spacebar to wake the Macbook pro. Is USB-Wake support on the Macbook Pro?

    In theory, if you open System Preferences/Bluetooth and select the device then hit 'Advanced' you should be able to check 'Allow Bluetooth devices to wake this computer' and it should work. I'm a little suspicious about the USB dongle side of the equation though ...

  • I am traveling and cannot connect my bluetooth keyboard to my MacBook Pro where I am. It was working fine when I left home. What can I do to fix the problem?

    I am traveling and cannot connect my bluetooth keyboard to my MacBook Pro where I am. It was working fine when I left home. What can I do to fix the problem?

    If you can get them paired again try making them "favorites" from the Bluetooth system preferences.
    Try smc and pram reset too.  May gave to do this before you can get them paired.

  • Keyboard shortcuts for Macbook pro and wireless keyboards.

    I´ve searched for an answer to this issue because it seems so obvious, but I can´t seem to find anything useful. Perhaps I´m just terrible at searching relevant posts here. I apologize if this has been addressed before.
    I´m taking some tutorials (from Lynda.com and Ripple training, to name a few) and in all of them, even those about very recent software, they keep aluding to ye olde long keyboards of yesteryear, when you had tildes and the plus and minus signs were on it's own keys. But most modern mac keyboards, on laptops such as macbook pro's, as well as desktop computers now, use the short keyboard. So, for example, if in the tutorial they explain how to reduce the size of a brush with a shortcut pressing command and the plus sign, that shortcut can't be used in a macbook pro, because to get the plus sign you also need a modifier, which completely alters the function of the sortcut.
    Now, I guess one could simply edit every command individually, but it seems to me there's gotta be a simpler, easier way to fix this, since old long keyboards have been almost fazed out. It amazes me why don't the programs such as Final Cut, to name an Apple proprietary, just come with a preset for long and short keyboards at this point. But they still don't.
    I hope someone can assist me with this issue, and I´m sorry about the syntax and grammar, english is not my native language.

    Tom,
    No I have not asked on a dedicated forum since this is an issue I've had with several programs (I should start to refer to them as apps), however, it's not a bad idea and I'll skim those forums to see if this issue has been addressed. Also, indeed you are right and I made a mistake in my previous post, the + sign comes up by just pressing that multipurpose key, with shift it will produce the asterisk and with option it will produce the bracket. I got carried away with Melophage's first post where the plus sign is used as an example. I apologize to both for my mistake, and I'll try to be more specific and careful in the future.
    Tom and Melophage,
    My keyboard does have the Spanish-ISO mode of input by default, and I've added the US input also, although I hardly ever use it. And indeed, being able to do something simple like zooming on a document or a web page with command and the plus sign is something I can easily manage. However, the things I usually have a problem with are, for example (and I'll be more specific this time), in photoshop cs6 to reduce or increase the size of a brush, you have to press either the left or right bracket. For me to get the left bracket, I have to press option and a multipurpose key that contains these three signs: ` ^ [. Now, in photoshop, as soon as you press the option key, the brush, or whatever tool you have selected, turns into the eyedropper tool, so pressing option and multipurpose key doesn´t get you a bracket, gets you the eyedropper and ignores any other key you press.
    In final cut there is a similar problem with the bracket to make L cuts with a shortcut that uses the bracket, and both programs also make use of the tilde key, which I don't even have in my keyboard.
    You both made me realize, of course, that the problem lies in my regional configuration of the keyboard, and that software makers probably just avoid the hassle of having to come up with multiple different sets of keyboard shortcuts due to those different layouts. I still think this is something that should be addressed right from the box, but now I realize it might not be such a prevalent issue, specially with people who have the US keyboard layout.

  • Recently my keyboard on my macbook pro died. i backed up the machine to my Seagate 500GB hard drive, successfully, and sent the notebook in for repairs. Now that the macbook is repaired, i can read from the seagate, but not write to it. It says read only.

    Recently my Macbook Pro's keyboard failed. Using my wireless keyboard, i managed to backup everything to my 500gb Seagate external hard drive. I sent the machine in, had the keyboard repaired, and now the machine is back, and i am loading my content back onto the macbook. My problem is that the drive is now read only, and i have searched for all the obvious fixes. The lock on the permissions secion of the info block on the drive. (not present). I have even tried disk utility, but all the options are greyed out.
    I am a graphic designer, and so i use my external drive extensively to move artwork around, so it is important that i can make it writable. It worked perfectly on this very same machine, two weeks ago, and nothing has changed on the drive, so i can only assume it is a software issue on the operating system.
    I have read through all the forums, etc, and can find nothing that works. I am loath to change anything on the drive, as it was working perfectly on this system before the system went in for its repair.
    Any help would be greatly appreciated.
    -Captain Zub-

    Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Maybe you are looking for

  • Get the current runspace of a powershell instance (Follow up to a previous question - Link in question)

    So this is a follow up question to a question I posted last week If PS {some Path}>C: = PS C:\> then why not HKLM: = PS HKLM:\> So here is where I am with the question above After running pretty much all of the powershell related DLL files through re

  • Error not getting while executing procedure via db link

    Hi, I am executing a database procedure remotely via database link from SQL prompt (SQL > EXECUTE REPLICATE_DATA@DBLK_SALE), and while getting any connectivity issue system is not giving any error (it is just showing as not responding).. if I am exec

  • Help with Nano not working

    Help!!! My Nano was fully charged and I let it sit for longer than a week. When I went back to the Nano, the battery was gone. I attached it to my Mac and the apple logo appeared and disappeared. It would not power on. The Nano turned on after 20 min

  • Upgrade Fee - damaging brand equity

    So here's the thing. I know that there are 'rational' explanations for the $30 'upgrade fee'.  And that AT&T and Sprint are charging $36 or $38. But that doesn't change the fact that as a loyal Verizon user for 7 years, with multiple phone lines, I F

  • Sync songs not working?

    Whenever I press the sync song button it does nothing. I want to get the songs from my library onto my ipod. My ipod is connected to my computer and it shows up on the list under devices in Itunes. Also when I go to look at the songs already on my ip