DVR menu slows down

Thursday morning about 01:00 EST the operating system of my FIOS DVR was replaced. The menu operation is now far slower than it was - that is, getting a program to play or stop or delete.
You can tell the new OS from the background color - now black. I suspect the slowdown is the addition of advertising to most every screen. Like "if you enjoyed this program, try the following from video on demand" with photos of posters for various programs and movies.
It is ridiculous for Verizon to downgrade service like this. FIX IT!

Could be any number of reasons this happens...
Have a look at this useful Support Article...
http://support.apple.com/kb/HT1147

Similar Messages

Safari menu... fan slow down... Curious

I notice that when I open a pulldown menu or a bookmarks menu, the fan on my iMacG5 slows down. If I inadventantly leave a menu in the down position the fan continues to run at the slow speed. As soon as I click to close the dropdown menu, the fan returns to it's normal speed. Strange, eh? This effect does not seem to happen with any other application or the finder. I am running 10.4.2

Hello,
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Slowing down the pictures on the DVD menu

I am using one of the 6.0 themes, the black reflection one. For the DVD menu, you can drop up to 8 or so photos. These photos then flow sideways across the screen repeatedly. My thing is, I think they flow to fast. Like it is hard to focus on them because they are moving so fast. Is there a way to control the speed of this?

Hello Gobigredfan,
guessing here...
you should be able to extend the duration of the menu by dropping different audio into the menu. check in the settings tab to see how long your menu is.
Example: if it's 30 sec choose a 60 sec audio clip and replace the original music with that. as your menu becomes longer, it should slow down.
hope this helps
mish

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Photoshop CC slows down suddenly, for several minutes

Hi!
I have a problem with Photoshop CC. I sit on a 27" iMac, 8GB RAM and an i5 processor, OS X Mavericks, Wacom intuos Pro tablet.
My problem, that suddenly occurs is tha Photoshop CC suddenly slows down to a halt. No error messages, it just gets very very slow. The first sign is that I suddenly cant zoom. I try to zoom, and nothing happens. Then the cursor, still able to move around with no problem, wont change to an arrow when hovering over buttons or menu items. If I open Safari, everything works fine, exept if I go back to Photoshop, then only the properties window will show. Photoshop is like this for up to ten minutes, then suddenly everything happens at once. All the zooming, closing of images if I tried that (with the keyboard), and then it is all fine again.
The problem occurs both when I do complex work with many layers, but also when doing simpler work with just a few layers.
I have 850GB free storage space and Photoshop is allowed to use 5GB of RAM. I usually dont have open more than two pictures at once. I use Lightroom 5, and PS CC as an external editor.
Any ideas how to solve this? It does sound like PS is writing alot to the HD sometimes, but it should not get this slow anyway, and the program does not freeze as in software error. I dont need to force quit PS, I just need to wait it out. Very annoying!
Sorry for my bad English! It is not my first language

Tells us a bit more about the work you are doing:
How many layers?
What types of layers? Shape? Text? etc.
Document dimensions?
Bit depth?
File size on disk?
Also, tell us a little about how things are set up:
Where is your scratch disk?
How much free space on that disk?
How much RAM?

MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

     Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
      After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
     After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
     The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
     At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
     Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Safari is slow to open and close. It also slows down other apps while running. Should I reload safari and if so, how do I do so?

Safari is slow to open and close. It also slows down other apps while it is running. How can I resolve this issue?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If there's no improvement, continue as follows.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

After upgrading to Yosemite, MF 820 ZTE Telenor USB modem does not start, system slow down dramatically / Macbook Pro Retina late 2012/. Also Thunderbolt plug in for Ethernet make the same ! Any idea ?

After upgrading to Yosemite, If i plug in my Zte MF 820 LTE modem into my Macbook Pro USB socket or a Thunderbolt USB Ethernet converter/ into my Notebook, it slow down dramatically the system, unusable, need to reboot and unplug the USB moderm or Thunderbolt interface. So it does work only without any plug in device..!?
Any idea ?

How To Run Telia ZTE MF820D 4G Modem On Lion
Open Network Preferences
Choose the ZTEUSBModem interface
Set “Configuration” to Default
Set “Phone Number” to *99#
Leave “User Name” and “Password” blank.
Check the “Show modem status in menu bar” checkbox for convenience.
Click “Advanced…”
Set “Vendor” to Other
Set “Model” to ZTE USB Modem.
Now click the little phone in the menubar and choose “Connect” from the dropdown.
Link: http://walternaeslund.com/how-to-run-telia-zte-mf820d-4g-modem-on-lion/
I'm using MacBook Pro Yosemite 10.10 and a MF820 too.I had a same problem before.But Now already fixed.
Hope this can help you.
Regrad
Amare YSL

Is there a way to slow down the playback of video in Captivate 5?

I just made several recordings (FMR) and would like to slow them down for the viewer. The video was actually of someone else's software demo that moved way too fast. On the Captivate skin there is "2x" to move the video twice as fast, but no "1/2x". Is there another way to slow down the video?
Thank you!

No. Not there. Honest.
When I go to Edit + Preferences, I see a menu on the left.
General Settings:
Show Welcome Screen (checked)
Generate Project Backup (unchecked)
Default Locations (I set this to my output folder)
Project Cache (I set this to my C:\ drive)
Comments At: (blank)
Grid Size: 16
Spelling Preferences
Confirmation Messages
Defaults:
Background Color: white
Object Defaults:
Select: Text Caption (or highligh box, or image, or smart shape)
Display For: Specific Time 3 secs
Default Style: Default Caption Style
Restore Selected Button
Restore All Button'
General
Autosize buttons
Autozize Captions
Calculate Caption Timing
Recording:
Settings:
Generate Captions in: English
Audio Options:
Narration
Actions in Real Time
Camera Sounds
Hide:
Recording Window
Task Icon
System Tray Icon
Others: Move New Windows Inside recording Area
Smoothen movements for:
Drag and Drop Actions
Mouse Wheel Actions
Video Demo Settings button:Video Demo Recording
Show mouse in video demo mode
Working folder (mapped to my C:\ drive)
Keys
To stop recording: End
For Automatic panning: F4
For Manual Panning: F3
To stop panning: F7
To snap recording window to mouse: F11
To toggle mouse capture in video mode: F12
restore Defaults button
Project
Information
Author
Company
E-mail:
Website:
Copyright:
Project Name:
Description:
Publish Settings:
Include Audio (checked)
Publish Audio as Mono (checked)
I don't see anything in the whole menu that says anything about fps. What am I missing? Thanks!

How to slow down and speed up a track in an arrangement re remix query

Hi, I've been asked to do a house/dance remix for a track where the client wants the track to start at a typical dance bpm and then slow down to the original track tempo 2 minutes in, then speed back up to the dance tempo...here's an example...around 1.20 mins is where you'll see this happening...
http://www.youtube.com/watch?v=fe3xLTQrvYM
How do I do this in Logic 9? I'm clueless...

you can set tempos in the Tempo List which is under the Options menu. In That window there is another options menu where the tempo operations window lives. You can set locators between which you can do tempo fades up or down.

How do I fix a Safari application that slows down and freezes everything?

Apple called last fall and said my particular Mac had a hard disk problem and they replaced it at the Apple store in late January 2013. I backed up the information on an external harddrive and used Time Machine before to transfer all the information to the new drive. Everything worked well and I finally put on Mountain Lion at 10.8.4. I also have Carbonite as a backup and it apparently was not enabled when I transferred the files until early May. In early May I had not used my iMac for about a month and when I started it I found about 40 named file folders on the Desktop that were empty. Some of those had named items in them but when I clicked on them they would dissappear. The actual files did exist and were not effected when I dumped the apparent alias folders. Safari started and would be ok at first but if I went away for an hour it would slow down. I took it in to the Genius Bar at Apple and they ran some tests and got rid of MacKeeper which they felt was causing the problem. I got my Mac back home and it still started slow but worked well at first and then started going slow. If I opened Word it would also start working at a slower speed. I needed to force quit Safari and the Word progran in order to quit or restart the Mac. I got an appointment for the next day and they ran all sorts of tests and the hard drive was working normally. They tried tweeking different areas and sent me home again. When I started working again it did the same thing, I would start out fine and eventually slow down and needed to be force quit to get out of it. A message came up indicating my MasOSX startup disk had no more space available for applications memory. I took it in a third time and the Genius went to the Activity Monitor and the Safari PID was 221 and %CPU 107, Threads 21 Real Mem 2.73 GB, Virtual Mem 22.00 Kind, Intel (64). I had no idea what that meant. I went home again and it still ran slow and couldn't run the programs for any length of time before it ran slow and affected the other programs so they would only quit if I used Force quit. I took it in for the forth time an they decided to keep it overnight. They ran ASD first to rule out memory. They noticed during the appointment the computer was slow to perform normal tasks such as showing boot options, booting into user, bootingto external user. If the ASD passed then they would perform erase and install and only restore users and application files from backup drive. They did this on Wed and Thur. night and I took it home Friday night, June 14 and it still has the same problem. Typing this message right now means typing and waiting for the words to appear.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How to find out what is slowing down your wireless speed

The first thing you need to do is when setting up your wireless internet is do it right from the beginning. For starters unplug and remove the batteries from all the cordless phones. If you have a wireless door bell or a repeater shut it off and unplug it.. Anything that is wireless in your house needs to be turned off. This also includes cell phones, Ipad's and Ipod's.This thing of telling the homeowner that the mircowave is causing problem is hog wash. But don't have it running while you are setting this up. In other words nothing in your house should be running including the AC and heat. Anything that is pulling hi amperage should be shut down during the set up. Now unplug all cables on the router except for your computer cable and power supply to the router. Hold the reset button in long enough to clear all settings. Now you are ready to set this up right. Sign into your router and go to My Network, if it is showing something other that your main frame computer you still have something on that the router is picking up. Find it and turn if off and reset the router again. Once everything is cleaned and the only this showing up is the computer you are ready. Now go to Speed Net or what ever you check your speed with and write down your average speed. Do three or four speed test to get the average reading. BTW, clear all cookies before you check your speed. Now go back into your router settings and rename you computer to what ever so you won't get that IP address confused with the rest of your hook up. Next take only one of your wireless devices and turn it on. Once the router picks it up rename it and put the security code on for that device to connect to the wireless device. It should also show it as being a wireless device. Also if all your devices can except performance mode go for it because the speeds will always be faster. Also start selecting one channel at a time to find the one that has the fastest speed. Try doing this close to the router, like in the same room. If you are using the performance mode your upload and download should be close to your wired connection. Now go to different parts of the house. You will see some drops but that is normal. Don't do this test on a PS3 or a WII because those speeds will always be slow no matter what you do. All Apple products won't work with Speed Net. Once you get connected to the internet it is always better to go back into your router and write down the assigned IP address and the IP address to the router sign in and manually put them in to each device. Always remember the higher security setting you can set you the faster the speed will be. Do each device as said in the above way. Something else you also might want to do is after you have set up each wireless device go back into your router setting under Wireless settings and disable SSID Broadcast. Only thing this will do is make it to where nobody can see your wireless connection. That way when someone wants to hack your router they won't be able to see it...ya can't hack what ya can't see....lol. Once you get all said wireless devices set up and connected then go back and start turning on phones...ect..ect. If you are truly getting interference you will be able to change the channel on either that device or change the channel on the router for that device. Most of the devices in this day and time should be able to except the 802.11n or the next letter down.The bad thing about the newest Verizon router is the security is still outdated for the PS3. Part two of this is Sony is still using a crap-o-la wireless internet receiver, as a result I don't care what cha do unless you hard wire it in and that still only helps some. Also this thing of putting your router on the window seal or up near the ceiling is also poo poo. If this was a true case why not just hook up a High Def antenna in the room...lol Also this thing of stating don't put the router near a wall is also doo doo. Their would have to be a load of copper wire in that wall to prevent a signal from going through it. If you think about it all wall electrical outlets are wired low to the floor. They take one room and wire them all together. They don't wire it up and down the walls. So most rooms have the wiring a foot from the floor.The most wire you will find in a house at one location is at the circuit breaker box and the box should be on a outside wall in the garage. In older homes like the 40's and 50's some are in the kitchen or a bedroom closet. On the older homes try and steer clear of those locations. Now if you are getting interference from something in your home this will be a easy way to find it. One thing Verizon needs to stop telling it's customer and that is if you get a faster speed which is more money it will correct your wireless problem...hog wash Once you spend your hard earned money and sign the contract, they forget to tell you they only guarantee that speed if it is hard wired...lol for some reason they always forget that part.

I forgot to suggest one more thing. On your computer go to start/ run/ type in MSCONFIG and go all the way to the right and click start up and then at the bottom select disable all and then reboot. Windows will only load what it need to operate. After that go back into MSCONFIG and go back to the start up and put a check into what ever security program you are using and reboot. Everything will still work fine. The only thing you are doing here is not running all the programs each time you turn your computer on.What this will do if you do this is it will start programs faster and it also is less wear and tear on your pooter. If you want to see what I am talking about go here>> http://www.blackviper.com/ and he will explain and show in full detail what I am talking about as far as being robbed by unnecessary programs running in the back ground. He will also explain the correct way of disabling things that you will never use. MS is set up for remote operation. Like calling your pooter from a phone which I am pretty sure most don't use that feature. If you want to see what happens when you go to any site while surfing download the free copy of CrapCleaner, run it and let it remove all the internet clutter and cookies, then go to one site and close IE down and rerun CrapCleaner again. You will then see what is really slowing down your internet speed. If you are using Windows 7 or 8 you need to go to Control Panel/ Taskbar and Start Menu/ then select Start menu again/ Customize/ and scroll down to Run Command and check it. Now you will be able to see the run command. I don't know why MS removed that feature.

MacBook Pro slowed down and now will not start up- flashing symbols on start screen.

I am increasingly worried about my MacBook Pro. It had been slow for a few weeks (I think it may be infected with some kind of malware), slowed down even more, and then a couple days ago when I turned it on it flashed a question mark folder, a prohibitory sign, and the apple logo on the startup screen and will not go past that. I followed the instructions on an apple help page for this issue- Nothing connected to it; I even removed the apple power cord. I tried a safe boot. I reset the NVRAM. It said to try starting up from an OS install disc, but my computer did not come with one. Here's the bit where I'm not sure if I made a stupid decision; another site said that the computer will download a recovery partition if there is no install disc, so I booted while holding down C even though I had no disc. I then read that holding option on startup will allow you to choose which disc to start from- I did that, and the only option displayed is a disc called Recovery (with a number after it that I think was 10.something, presumably referring to the OS version). Does this mean I have lost access to my computer's Macintosh HD? Have my files been lost? Unfortunately I do not have them backed up. Bad decision on my part.

Thanks for the quick response.
Command-option-r does take me to a screen with a spinning globe. Below the globe is a drop-down menu from which to select a wi-fi network. My network, however, is not listed. (I am now sitting right by the router, and my iPhone is on the wifi without any problem.) I go instead to manually type it in. I have triple checked the network name and password. I have used both the WEP key, which I have always used, and something that the sticker on the router refers to as the Mac ID, which is the WEP but with two zeros before it. Still the screen shakes as if I have entered the wrong password. I'm not sure what's going on now.

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?
Also, I have the 08 version of iWork. Will this cause problems for the update? Can I update this AFTER I update the processor?

Welcome to Apple Support Communities
There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac

System slow down after lion update 8/18/11

Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?

Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers!

DVR menu slows down

Similar Messages

Maybe you are looking for