DVR records series for only one second

I am new to fios. I have several series scheduled to record but when I go to watch, I find that only one second has been recorded. Anyone have an idea as to what's going on? Thanks.

Sorry to hear about the recording troubles you are having. There are a few things that would need to be checked
1) tune to the channel you are trying to record to make sure you are subscribed to it
2) try watching one of the shows live that you are recording to see if there's a problem with its feed
3) perform the auto correct by pressing menu, then go to CUSTOMER SUPPORT, then IN HOME AGENT, then SET TOP BOX AUTO CORRECTION. Please let us know if further assistance is required.
If additional assistance is required please reply back so we can get more information from you.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

Monitor stays on for only one second

I have an hp pavilion f1503 and suddenly the monitor is staying on for one second and goes blank. If I turn the power to the monitor off and then on again it will stay on for one second and go blank again. I can click and operate it in one second increments but that's it. Any suggestions? Thanks.

yep -same thing here - comes on normal, after one second, goes blank. No matter the PC hooked to does the same thing. But here's the twist - the monitor is actually still displaying the images. If you shine light on it, you can see the screen changes taking place (I hooked mine to my sony laptop - hear that HP? Sony) and i could Juuuuust see the images on rthe HP monitor. That doesnt help me of course - the monitor is only 3 years old and has had very light use. I should also mention that the tower (pavillion a1000) also just died. Cant recover it. Gonna try wiping the hard drive and reinstall the operating system for the third time but if that does not do it, you can look for the parts on e-bay. What a great investment.
For the record, any HP product that I have ever owned has performed poorly, has been loaded with bugs from all their superfluous software, lasted a fraction of the time it reasonably should, and their support is god awful. Hence the Sony Vaio I bought just the other day.

Can I show a data label for only one point in a series?

Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
If this can't be done, I guess that adding a text box over those points would work.
Thanks

Hi W-T,
Welcome to Apple Discussions and the Numbers '09 forum.
wahoo_tiger wrote:
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
Sure. Here's and example labeling only the MIN and MAX points.
Column B contains the data charted with the blue line.
Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
Regards,
Barry

Hitting the space bar the track would only play for about one second. Then it stops.

I'm new to Soundbooth and have already a serious problem. Hitting the space bar the track would only play for about one second. Then it stops. I don't know what to do. I have the Production Suite CS5. All other applications run well.

i have the exact problem in my computer lab running macpro on 10.6.8 using CS5... this is happening in every ADOBE CS5 software using sound : soundbooth, AEX, premier pro. this is totaly ridiculous, nothing like that is happening in the other software (finalcut, finalcut xpress, audacity, soundtrack pro all are working fine) ...
i find the lack of help & replies very weird in this forum...

Calendar alert only one second.

Calendar alert only one second.

Hi and welcome to the forums!
Delete the intellisync folder, and go through the setup wizard again.
Select only calendar, one day prior and past. Set up for one way device to Outlook.
Set conflict resolution to notify you. If successful. Try the one way device to Outlook sync
for the full calendar, again with notification to you for conflict, that way you can keep
unwanted deletes from occurring. If successful. Go to the device setup wizard and
set up for the normal two way sync for all apps. I do recommend keeping the conflict
resolution to notify you. It can be very useful in keeping small problems for becoming
major. The link for deleting the folder is on the bottom of the page:
Thanks
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11703&sliceId=SAL_Pub...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How can I correct that emails for only one of my address going direct to my trash file before even being read and this just started a while back not before?

have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.

thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

Changing DB character set for only one schema

We are interested in changing the characterset of only one user from Western European to AL32UTF8.
Could you please verify if the following steps will be correct to do the same.
1. Run CSScan on the one user
2. Fix any issues
3. Export that one user (with NLS_LANG set to <your old database character set>)
4. Create a new database in the AL32UTF8 character set
5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)

Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
Database Character Set Scanner provide user scan mode
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>

These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How do I set up an indicator to display for only 1 second?

How do I set up an indicator to display for only 1 second?
I am reading keys from a serial device and I turn on an indicator that corresponds to the key pressed
on the serial device but how do I set this up so that it only stays lit (enabled) for a second or two?
The indicator is inside of a case statement and turns on OK but I do not want it to stay on for more than
a second or two. How do I modify this to display for only a second or two?
(P.S. I am running an old version 8.2 and can only see vis that are 8.2 or older.)
thanks

Simplest way to turn the indicator off (false value) after a set time is to use a Sequence structure (flat or stacked).
Frame 1, set to true,
Frame 2, Wait ms (wire millisecond value to wait)
Frame 3, set to false.
This method, however, prevents the code outside the case structure from running during that wait time.
Something more elaborate will allow the external code to run. What comes to mind is a shift register that holds the indicator name and the time stamp (in milliseconds) when it was turned on, in an array of clusters. Each iteration of your loop will check this register to see if a certain time has passed (current time stamp minus turn on time). If so, use a case structure to turn the indicator off and remove the elements from the shift register array (so you don't keep setting the indicator to false). The array will let you control multiple indicators independently.
A problem with this option could arise from multiple readings. Lets say you want to turn it off after 2 seconds, but you read the value again after 1 second (this means the indicator should be on for a total of 3). The code would still turn it off after the 2 second mark. Of course this really depends on the time intervals involved with your code.

EA2: Code is generated for only one column with Domain check constraint.

I created a Domain with a Value List (Y or N - Yes or No) and used that domain for two columns in the same table. But for only one column (the last one) the check appears in the generated DDL.
After I enabled the "Use Domain Constraints" both checks appear in the DDL, but one as an inline check constraint and one as an "Alter table add contraint.."
Once I changed the naming Template for the check constraint, both constraints are generated as an Alter table clause. The inline check constraint is only generated when the name of the constraint (according to the template) is too long. It would be nice if I could choose if I want an inline or a separate check constraint definition.
Edited by: Roel on Nov 23, 2010 11:55 AM
Edited by: Roel on Nov 23, 2010 12:02 PM

I logged ER for that
Philip

PDF file not generating for only one Invoice billing document

Hi all,
We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
Bug: Not possible to get output in pdf format for only one Invoice type(TR code: VF02) except for all it is generating PDF output.
Can anybody help me out to find the route cause for this problem.
Regards,
Murali.

Hi,
For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
So should i need to go through the Printer settings?
Regards,
Murali.

Program installed for only one user

Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
Thanks

Select the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
sudo chown -R root:admin
Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences.

ChaRM scenario for only one productive system

Hi CHaRM-experts!
I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
Does ChaRM support such case?
Thank you very much!
regards
Thom

Hi Don,
thank you very much for your answer.
No, I do not plan any transport in the productive system.
I would just make any adminstrative changes without transport.
Does ChaRM support such scenarios?
Thank you!
regards
Thom

Skype not notifying (oange flash) for only one con...

I've been having the issue of skype not giving me an orange flashing taskbar notification for only one of my contacts.
Strangely, this does not always happen. Sometimes this contact's messages will in fact make my taskbar flash. Other times it will not. I can add that both the contact and I have our status on "online", furthermore I have checked the following suggestion I found here on the forums but it did not work as it was already properly set to always notify me:
Highlight the contacts name in the Contacts list so you can see the chat window for this contact. Click on the Conversation menu and select Notification settings. Select there the appropriate option for the notifications.
Any ideas? This has really been going on for at least a few months, perhaps a year

Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb

DVR records series for only one second

Similar Messages

Maybe you are looking for