DVR replay on the non-DVR STB - very low quality

I started recording a football game on the DVR, and about 45 minutes later I began to watch it on the non-DVR setbox in another room. The quality is very low: every 10 seconds (almost exactly) the picture gets very choppy, stops and starts.
On the DVR itself, the replay is good.
Is this a known problem with the STB?

Have you attempted re-booting both STBs?

Similar Messages

Rendered video very low quality

My camera shoots in MTS format. I converted the file to mp4 and edited it. I then imported that footage into After Effects and when I tried to render the video it was very low quality. I made sure the composition settings and render settings matched that of my video. I tried saving it as H.264, mov, avi, m4v, and mpeg2 non of which were good enough quality to use. The avi format came close in quality for the video but everything seemed to move in slow motion. The audio played perfectly though. I also tried rendering video directly from the MTS file and it still didn't work.
Is there a specific way I should convert or encode the file? I tried some different settings within Adobe Media Encoder but when I brought the file into AE and tried to render I got the same issues of it being low quality.
This is for a client so it's very important that I get the needed effects added to this video. Thanks in advance for any help!

I understand how After Effects rendering works and different file types. I just wanted to try rendering in different formats just make sure I hadn't missed something. I figured something out that came close to the quality I need so I guess it will have to work.
My original MTS file is 1920 x 1080 and 29 fps.
I rendered it with these settings originally
NTSC, 1920 x 1080
29.9 fps
Bitrate CBR 30 Mbps
The file came out choppy and noticeably lower quality.
The last time I rendered it with these settings:
NTSC, 1280 x 720,
59.94 fps
Bitrate CBR 20 MBps
The quality was much much better. It still had a little distortion with a lot of movement but it was much more bearable so I guess that's what I'm going with. If anyone knows of any better settings it would be greatly appreciated! Thanks.

New to FIOS TV Multi-room DVR - Should I be able to use DVR functions from the other HD STBs?

We just converted from Directv (three DVRs) to FIOS TV and am hoping I didn't make a huge mistake: The sales agent I spoke to said that the Multi-room DVR (Motorola QIP-7216-1) and non-DVR STB would enable me to get the same features I had with my Directv setup so each user could Stop/Start/Record programming from their own remote. Unless I'm doing something wrong, I can only perform DVR control functions from the real DVR. I can view recorded programming on the non-DVR STBs but pressing record for a live broadcast or trying to select a show to record from the guide doesn't work.
I have the ActiontecGen2 MOCA connected MI424WR router, three HD STBs (Motorola 7000), one standard definition STB and the DVR.

Tomd514 wrote:
We just converted from Directv (three DVRs) to FIOS TV and am hoping I didn't make a huge mistake: The sales agent I spoke to said that the Multi-room DVR (Motorola QIP-7216-1) and non-DVR STB would enable me to get the same features I had with my Directv setup so each user could Stop/Start/Record programming from their own remote. Unless I'm doing something wrong, I can only perform DVR control functions from the real DVR. I can view recorded programming on the non-DVR STBs but pressing record for a live broadcast or trying to select a show to record from the guide doesn't work.
I have the ActiontecGen2 MOCA connected MI424WR router, three HD STBs (Motorola 7000), one standard definition STB and the DVR.
As you've found, you can only create recordings from the DVR. If you want each room to have the ability to schedule recordings, then you need a separate DVR in each room.
The FiOS Motorola DVRs cannot access recordings stored on other DVRs.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

How to tune the threshold to a very low value

Hi,
how to set the thershold to a very low value for database 9i. on which critieria we will tune this thershold value of DB

user606944 wrote:
I/o thershold value?There is no threshold value... unless there is some base line to measure against.
Also, I/O threshold values in what respect? Number of reads/sec? Writes/sec? Latency per I/O call? Number of bytes per second?
A solution is only as good as the problem definition. You have not defined any problem.. thus it is quite difficult to suggest any type of solution to you.

HT204405 The ringing voluom is very low on my new iPhone 5s

THe ringing voluom is very low on my phone , is it the phone or the soft wear , I just bought the phone 2 days ago

Hi Nouraldeen,
Welcome to the Support Communities!
As a first step, I would suggest restarting and/or resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Here are some additional troubleshooting steps for sound on your iPhone:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
- Judy

After import from Iphoto some pictures are of very low quality. The original file in Iphoto is very good.

Final cut Express
I imported several pictures by using Iphoto. Some of them, not all, are of very low quality even if the original file is of a very good quality.

It sounds as though you may have imported the thumbnails but I can't imagine how.
It all depends on what you mean by very low quality.
Your iPhoto pictures will be around 4,000x3,000 pixels but when they are imported into a standard def timeline they will be around 720x540 which is a tremendous reduction.
They should still look OK but not as good as the brilliant hi-res originals.
Message was edited by: Ian R. Brown

My volume on the Iphone 3GS is very low is it an equipment problem, setting problem or update problem?

My volume on the iPhone 3GS is very low. Is it an equipment problem, settings problem or update problem? And, is there a fix other than having Apple fix it?

Have you had a look here to make sure it is set up how you want it...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Hi Lèonie, it is still recording only 8 minutes (more or less). I take off the 'metronomo', time is 'on', the section timing is on 'automatic'. What do you mean saying 'set the tempo to a very low value' ? Thank you again. Ipad Retina ...

Hi Lèonie, I tried, but it still recording only 8 minutes (more or less).
I took off the 'metronomo', tempo is on (automatic), the section time
is on (automatic).
What do you mean when you say "set the tempo to a very low value" ?
Thank you again.
Best Regards,
Enrico

Enrico,
in your previous post you said:
GarageBand (used with a Mic microphone) is stopping to record after only 7/8 minutes.
In which way I may record a complete concert or at least one hour of music ???
If you want to record at least one hour of music, you need to make the max. of 320 bars last for a long time - for example:
With a maximum of 320 bars, a song with160 bpm and a 4/4 measure will only last for 8 minutes; to make it last 32 minutes, reduce the tempo to 40 bpm.
Léonie

MOVED: I have no sound /the sound level is VERY low: MSI K9MM-v

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=115320.0

Go to Control panel, Administrative Tools, Computer Management, Disk Management and allocate remaining disk space.
OK, i can see around 22 GB of unallocated disk space. i will allocate the remaining disk space.
Check Volume from mixer settings, cable connections, Volume on your speakers.
I have checked and i've the sam problem. the volume in my speakers is maximum and no change. the sound level is VERY low. My speakers works because i have the test in my other PC.

The microphone has a very low level

The microphone has a very low hearing and recording level, sound level is ok and no silence activated

Is that a question?
What are you looking for an answer to?
There are no microphone controls.

HT1849 hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can you help me to fix the problem ?

hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can someone help me to fix the problem ?

Hello Kishore1022,
It sounds like you have a new album downloaded and the tracks all have a very low volume. I recommend checking to see if Sound Check is enabled in the Music settings.
iPad User Guide
http://help.apple.com/ipad/7/#/iPad99f37037
Go to Settings > Music to set options for Music, including:
Sound Check (to normalize the volume level of your audio content)
You can also try downloading the purchases onto a computer, with either of these articles depending on your version of the operating system:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Or
iTunes 11 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12283
Thank you for using Apple Support Communities.
Cheers,
Sterling
Thank you for using Apple Support Communities.
All the best,
Sterling

Prior to importing photo's should the thumbnails be of a low quality such that they are blurry?

Prior to importing photo's should the thumbnails be of a low quality such that they are blurry?
I have recently started to use lightroom and when selecting a folder to import from my hard drive the thumbnails are of (in my opinion) very low quality. Once they are imported they are fine, is this correct?

The import dialog is there to help you locate And identify the images that you want to import. They are not high quality previews. You shouldn't consider using the import dialog to determine the quality of any image. Use it to identify your images and get them imported. Then let Lightroom generate its own previews.

Still images have very low quality

When I import images into Final Cut Express they are pixelated and look very bad. When I open the same image in Preview the image is displayed at full quality. How can I fix this? I am running Final Cut Express 2.0.3.
Thanks for your help
iBook G4 1.2GHz 768MB Mac OS X (10.4.3)

Yes, I am looking at the output rendered on a monitor.
Are you saying that my vidieo is compresed?
How might I uncompress it?

DVR replay on the non-DVR STB - very low quality

Similar Messages

Maybe you are looking for