Dvr620ku only shows black and white using HDMI cable

I connected the av cables and they showed black and white, now im connected through hdmi and same problem watching vcr tapes... what can I do besides trying a component cable?

I would recommend trying composite (not component) video. There is one jack, color coded yellow, at the bottom right when looking at the back of the unit. Run that into your TV. Your TV likely has a combination component/composite video input. If so, you'd connect the output from the DVR620 into the Y input on the TV and connect nothing into Pb and Pr. If you're uncertain, post back with the model number of your TV so I can check its manual online. I'm not sure why HDMI would give you black and white unless the tracking and picture quality is poor with the VHS tape. I have tested this scenario multiple times with my DVR620 and always get color. Presumably you get color when playing back DVDs? If you have L1 or L2 connected to a cable box, I recommend you record a brief segment off of a TV channel onto VHS, and then test playing that back to see if that is in color or black and white.

Similar Messages

  • Why does my tv only show black and white

    I see only black and white on my tv from my apple tv

    Thank you,
    I have set the unit to factory restore and the tv resolution to 480i.  I have done a reboot. The tv is an old tube tv, and is set to factory resolution and cannot be changed, there is no settings to change the resolution/settings.  The tv color is fine during the cable settings.
    Thanks
    vince

  • IChat video only in black and white?

    When I use iChat, the video output is only in black and white. Does anyone know how I can get it to return to full color?

    Hi,
    Click on your own Video icon so you have a Preview of your Video
    GO to the Video Menu and Select Video Effects.
    In there whichever "Page" it is On select the middle one.
    iChat will remember any Effect or, on Intels, any Backdrop you set if it is still active on ending A Video chat.
    10:26 PM Monday; February 15, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Random Visio Stencils Displaying Only as Black and White Lines (No colour)

    I'm experiencing a strange problem where some Visio stencils/shapes are displaying only as black and white outlines (i.e. - without any colour). I'm using Visio 2010 on a Samsung NC900 laptop with 8gb RAM, 1.7Ghz i7 CPU on Windows 7.
    The symptoms that I'm experiencing are:
    The majority of stencils display fine in the left hand stencil window but some do not.
    Some stencils display the majority of shapes as black and white outlines but some in full colour.
    Some shapes display fine within the stencil window but change to black and white outline when I drag them to the drawing (These are typically ones that I open independently of the drawing - i.e. - by double clicking rather than via "Search Shapes").
    I've done a search on the web for this problem and have found some similar issues but none of the suggested fixes work.
    One of the stencils that I experience this issue with is the Exchange 2013 Microsoft stencil.
    I've updated Java and Silverlight (stab in the dark there) and my graphics driver is up to date.
    It's driving me mad now so any help would be appreciated!
    Nikos101

    Lori
    The remove profile worked like a charm with the greyscale images. Maybe a slight loss of contrast, but I'll hold the tiff scan in any case. I-photo would not import the image again (already in the library) but I can remove the profile on the image in my folder outside i-photo. And I think I can prevent it at import now.
    Thanks! I doubt I would ever have figured that one out.
    Marilyn A

  • I own a iphone 5 the camera in photo mode showing black and white and pictures

    My iphone 5 camera in photo mode showing black and white and pictures are captured in black and white only.how to make it in colour mode

    Do you have a filter turned on?

  • Hp photosmart 7150 only prints black and white with mac

    My hp photosmart 7150 only prints black and white with mac.  I have tried installing and uninstalling, installing drivers, but no change.

    Hi,
    You did not mentioned your Mac OS X version, however I assume you have one of the latest versions.
    The Photosmart 7150 is not supported on Mac OS X v10.6, v10.7, v10.8 or v10.9 and therefore it is more than likely that there are no drivers for your OS and the used Generic Driver only provide B&W printing.
    Although it is not officially supported you may check 3rd party solutions such as the 3rd party HP-IJS print drivers which list your printer as supported.
    Be sure to install any of the 3 required downloads, then click the plus sign under Printers & Scanners, click the Use drop down and click on Select Printer Software.
    Search for your printer model form the list and select the driver, I believe that may work:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
    Although it only list up to 10.8 (Mountain Lion) it should also work on Mavericks from my experience.
    Hope that may help,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Drop iphone 4 on floor showing black and white lines

    drop on floor show black and white line

    And what troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Hello - When I steam Netflix from my iPad, I only receive black and white on the TV.  Any ideas why?   Thank you, jackiedd

    Hello - When I stream Netflix from my Ipad, I only received black and white TV reception??  Any thoughts why?  Thank you, Jackiedd

    Nope. It will reset all settings. For fix errors.
    Or you can try Logging out and Restart your iPad and Sign in again.

  • User Contributed Tips, MacBook (black and white) Using your MacBook Forum

    *The following User Contributed Tips are located in the MacBook (black and white) > Using your MacBook Forum:*
    a brody - I need Firewire for Camcorders, yet the MacBook and MacBook Air lack it
    http://discussions.apple.com/thread.jspa?threadID=1928027
    Publish date: April 4, 2009
    *The following related tips are located in other areas of Apple Discussions:*
    Please see the User Tips Library

    Keep the temperature down, usually by boosting the lowest default fan speed to help.
    Also FBDIMMs on Amazon I have run at 59*C versus the 72*C+ of prior modules so adding less heat into the system.
    There are kits you can modify the card's fan and add copper heat sink pipes. You may be fine and not have to buy a new card and continue with the 8800GT.
    The X1900 was a huge problem with dust and therefore with heat and making the fans work harder - but never able to cool the interior, so the card had to be removed and dust inside the card's chamber 3-4X per year.
    My Mac Pro 1,1 even without the X1900 would warm up the area during winter after 3-4 hours of use - the exhaust on these is very hot. So monitor the temps and fans and I would  install SmcFanControl - I have always had it since 2007 to keep the fans default at 800-900 rpm along with Hardware Monitor (or use another) to monitor all the system sensors.

  • Viewer showing only saturated black and white

    My Aperture is gone into a funk -- The viewer shows only a totally saturated black and white image -- each pixel is either all white or all black (browser and thumbnails are normal). This is for all images in all projects. I have rebooted the machine and restarted Aperture to no avail. I cant find a preference item that seems to control this. Ideas?
    Here is info on my system hardware:
    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 4 GB

    Partially answering my own question (perhaps this will help others). Looking more closely at the viewer screen, I saw the words "proofing profile". So I found that the proofing profile was turned on in the view menu, and it was set to "black and white". (This must have inadvertently been set when I tried to convert an image in monochrome for printing.) Turning off the proofing profile in the view menu returned me to the original images.
    However, I still do not understand why the proofing profile images were totally saturated. Is "black and white" different from monochrome? Where are the settings to change the saturation on the proofing profile?

  • Apple tv 1 shows black and white picture???

    i got my atv1 4 yrs back.was using it with my old tv with the 3 component cables,and i used to get only black and white pictures.
    but after using it for such long time,i finally got a new led-hdtv.but to my surprise still the apple tv shows only black and white.i am not the getting what the problem is and how to fix it to make it color???

    Welcome to the Apple community.
    The fact that you are receiving a black and white picture suggests that you are using only one of the elements of the component cabling. Can you tell me more about how you have connected the Apple TV to your new TV please.

  • Only printing black and white

    I'm using a macbook 13" with an airport express and an HP deskjet 4100. I can print wirelessly just fine, but I can only print in black and white. Any ideas how to remedy this situation?

    Hello MariPan,
    Welcome to the HP Forums.
    Have you attempted to do a colour copy?  If the copy is black and white as well, we then know that it is strictly an issue with the printer and not a setting on the computer.
    Please respond with which Operating System you are running just in case it is an issue in the computer.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Write me back when you have time and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Macbook display shows black and white lines when fullscreen

    If i leave my Macbook on for a while without shutting down and then I view a photo or movie (in player or safari) fullscreen the screen shows just black and white lines. Sort of like bad tv reception. It has happened a few times and a reboot has fixed it but it comes back. Any ideas anyone?
    Thanks

    I have a similar problem. Not sure you're on here (since the post is really old) but did you manage to work it out? How?
    My thread:
    https://discussions.apple.com/message/19007548#19007548
    My Imac froze earlier today as I was dragging an image from safari into indesig and when it froze the weirdest pattern overlaid the screen. It looked just like the opacity pattern from photoshop with grey and white squares. I turned the computer off using the power button and unplugged everything.
    Now when I try to start it these weird lines appear on my start up screen (see link)...
    http://meijerladdaruppgrejer.wordpress.com/2012/07/24/oops/
    as you can see the apple and the wheel appears as normal...
    ... then it moves to a normal looking white screen (perhaps a bit greener than usual) and around 30 seconds later freezes at the blue screen.
    I've tried the cmd + alt + p + r several times but it won't help.
    If i press alt during start up I can see and choose my hard drive but just end up at the blue screen again.
    Can I try starting it up in safe mode or something?

  • Hp psc 950 printer only prints black and white, no driver for Canon lpb 5000

    Hi everyone,
    I am trying to install my two printers on mac book pro.
    Problem 1.
    My HP psc 950 printer is only printing in a bad black and white quality - no color at all?? - any idea where I can download a printerdriver that is actually up to date? The one mac book has preinstalled seems not to be the right one?
    Problem 2.
    My may can´t find a driver for my other printer Canon LPB 5000 at all. I´ve already downloaded the canon drivers for Mac book  - so I see a long list of Canon drivers but the LPB 5000 is not there and I don´t find any download of it in the web. I work with os x 10.7 and there is just an old mac driver for 10.6 to be found on the Canon website. I downloaded it but still does not work.
    Hope someone can help. Both printers used to work fine on Windows but I am changing to Mac now and need to get them work.
    Thanks,
    K.

    Canon LPB5000 driver for 10.7 is at http://support-au.canon.com.au/P/search?model=LASER+SHOT+LBP5000&menu=download&f ilter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E7
    There is also this note: When using with OS X Lion, install this printer driver, and then register the printer. For information on how to register ... support-au.canon.com.au/contents/AU/EN/0100359005.html

  • Airport express only prints black and white

    I'm using a macbook 13" with an airport express and an HP deskjet 4100. I can print wirelessly just fine, but I can only print in black and white. Any ideas how to remedy this situation?

    I would recommend posting your item in the Leopard Printing forum, it seems your Airport Express is working fine if the printer is printing, however there seems to be an issue with the driver. Try to going to:
    1. System Preferences, then click on Print and Fax. Choose your printer on the left box and click the - sign below. Then click the + sign and add your printer back then try printing again.

Maybe you are looking for