DW 4 not seeing GoLive .site file!

I have several sites created in GoLive 7. I downloaded the GoLive 9 free trial, brought them over into GL9. Then I did the "Convert Site to New Structure" command as I have seen suggested. Downloaded the GoLive to DW migration extension and installed it. So far so good.
But when I go to Import GoLive Site, and navigate to the folder where the site file is (there are actually several, only one is the current one), Dreamweaver does not "see" the .site files, even though when I look in the window in explorer, they are there. All I see are the web-content, web-data, and web-settings folders, but no .site files at all.

rich.leach wrote:
> no, the file was not open, and I tried all of the
various search options
> available in the DW Find feature, especially after this
issue was discovered.
> And if DW customers are required to register particular
file types with DW in
> order to have the application successfully search those
files, that would
> warrant a special instruction set or at least a dialog
box somewhere in DW,
> wouldn't you agree???
This is an issue that I have never come across before. You're
using a
non-standard filename extension, so it doesn't particularly
surprise me
that Dreamweaver ignored it. Have you tried entering
.properties in the
list of filename extensions, as I suggested? If that works,
your problem
is solved. All that's needed is for the documentation to be
made more
explicit.
On the other hand, if your filename extension is likely to be
in
widespread use, perhaps it's something that should be added
to the
standard list of files that Dreamweaver handles. Submit a
feature
request to the Dreamweaver team.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Similar Messages

Since upgrading to windows 8.1 I can not see any local files in the files window.

I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
If I change sites under local view get error thet dreamweaver can not update cache

Thanks Nancy
It certainly worked in windows 8.
I have deactivated and am trying to reload software inside of windows 8.1.
Will let you know.
Thanks again
Terry
Date: Fri, 1 Nov 2013 12:13:57 -0700
From: [email protected]
To: [email protected]
Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
    Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
    created by Nancy O. in Dreamweaver support forum - View the full discussion
I honestly don't know if DW CS5 is compatible with Win 8.1. The OS compatibility FAQ only mentions DW CS6 & CC.
http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
Maybe someone else can shed more light on this.
Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Elements 11 not seeing/downloading RAW files. HELP!!!

Hello,
Just got Elements 11 and when I put the card into my pc the download box pops up and it reads the card, but it does not see the raw files, only the jpg files. If I use windows explorer to view the card it sees the raw files fine. I can open raw files from the card into elements 11 editor fine. It just will not see the raw file in the downloader box. I had Elements 7 before 11 and it worked fine.
I have windows 7 and Elements 11 is updated to the latest version.
Any help would be great.
Thanks,
David

Thanks for the reply.
Thats right, not seeing any raw thumbnails. If I just have raw files on the card and put it into the PC's card reader or a USB exturnal card reader all it says is"This divice does not have any supported media". It will show the jpg and tif files. It's a really weird problem. Elements 7 worked fine. All my cameras are old, D700, D3, D300s, D1x so it's not a problem being a new camera thats not supported yet.
I'll try the organizer way and see if it works or I may just use the Nikon transfer software.

I do not see the jpg files in Finder?

I need to be able to see the pictures as files in Finder. I only see the IPHOTO Library. But when I click on it, it does not display the individual files as it used to. Without this feature, I can not upload them to Shutterfly. Can someone help me with this?

Grace G
The iPhoto Library Folder is now a Unix style package file.
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
For Shutterfly and many other photosites check out PictureSync.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

Lightroom 4 and MBA's SD reader not seeing RW2 raw files

I've just upgraded to Lr4 from Lr3. Lr3 worked great in every respect with importing JPG+RW2 image pairs when accessing via the MBA's card reader. However, Lr4 does not see the RW2 raw files(?)
As a test, I first copied all image files from the card to a test folder on the harddrive. Lr4 saw all files fine and was able to import them into the library, so it is seemingly a problem associated with the card or the reader, or Lr4 has a problem with the card or the reader. The card is a Sandisk 16Gb "Extreme Pro" that has worked perfectly with Lr3 ever since I purchased the camera (Panasonic G3)
Has anyone experienced similar problems? ... especially with Lr4, but also in any other respect?
2011 MBA, Lion 10.7.3
TIA & cheerios from the Avalon Peninsula

>Just curious -- is there some difference between the NEF files created on my Nikon D800 (which are easily imported into Lightroom) and the NEF files created on the Nikon D610 (which are not easily imported into Lightroom)
Lightroom 5 supports the D610. There is a big difference between nef from the D610 and older cameras. They were shot with a camera that Adobe hadn't profiled yet when LR 4.4 was out. Otherwise, if you hack the nef files to read that they were shot on a D600, LR 4.4 will read them, but I would caution against doing that as the sensor is slightly different on the D610 than on the D600, resulting in differences in color rendering. Simplest is as dj says to convert the nets to dng (which embeds the newer profiles in the file) or to upgrade to LR 5.

Not seeing all the files on a shared Windows server??

I'm using a Windows Server 2003 to share files between Macintosh an Windows users. But sometimes the Mac users (10.4) don't see all the files (in the same folder) that the Windows users do! I've checked on the server and I don't see any (obvious) permission problem ... So why aren't all the files displayed???
Any help is greatly appreciated!
Jerome

Hello Herr Jerome, I have the same problem, here in our company. We have around 70 employees connected to a windows server network. There are 68 PCs and 2 macs, one of which is mine. We have a special directory on the server called macdata, but other users place their files in their own respective directories, to which we normally have access.
Since yesterday, if anyone else places files from PC on to the server for me, I cant see them. I can see all other files but not the ones copied since yesterday.Our support guys have tried pretty much everything including resetting permissions, to no avial. finally they received an error message: Caution older mac systems will have problems reading more than 65000 (plus a few files). But there are in advance of 100 000 files on our server, but the extra 35 000 wernt put on there just yesterday.I´m running Macosx 10.4.11 which is by no means an old system.
I´ve spent the day hunting the Internet for a solution, but Info on this subject seem to be scarce! I mean this is a very big problem in a business environment, our IS dept has been trying to scrap the macs for years and I´ve been working here on a mac and fighting for 15 years. So now our IS has at last a valid reason for switching us to PCs.
I don´t understand Apple not publishing these limitions in a prominent spot on their website, not to mention a solution because it´s a crucial limitation, people should know about. Apple truely is not interested in corporate, nor in its truly loyal champions bravely fighting aganst the PC onslaught

Why can't my new Macbook Pro not see individual MTS files on the sony cx700 flash drive? How do I get AVCHD MTS files off the camera not using imovie or FCP?

Hi,
I bought a new MacBook Pro (OS X version 10.8) recently to replace an older version. I work with different Sony cameras (Hard drive and flash drive storage), but when I connect the cameras (Sony Cx560, 700 and XR520) to the Mac it only shows an AVCHD icon. Usually you can see the individual files. We have 3 Macbook Pro's here and on 2 of them it works. Is there a setting or a driver I need to download for this new Mac? The other ones read it without intsalling anything.
Thanks for any tips.

There are two (and probably more than two) third party apps that will do this.
1) ClipWrap
2) Voltaic

Why does Find not see a visible file at Volume level?

I recently searched (Find) my iMac's internal hard drive for a file that I knew I had created ("MAC addresses.doc"), but it found no such file, either by File Name or Contents. I had to try to remember where I filed it, and then I found it in [Macintosh HD] > Library > Documentation > User Guides and Information. Searching (Find) again at the level of any folder within the volume, even Library, finds the file immediately, both by File Name and Content. The file has no unusual properties, and its Permissions allow everyone to at least Read it. This occurs even after repairing permissions of the volume. Why should the OS be unable to Find this file for me when searched on the volume name? Should I change some setting/preference in order to allow that (all files to be found at Volume level)?

Thanks Frank,
SYSTEM_PARAMETER is a table owned by X. If I qualify the select statement by adding the owner it works, but of course I do not want to do that. Here is the DDL for creating SYSTEM_PARAMETER:
create table SYSTEM_PARAMETER
name         VARCHAR2(256) not null,
date_value   DATE,
number_value NUMBER,
string_value VARCHAR2(512),
comments     VARCHAR2(512)
alter table SYSTEM_PARAMETER add constraint PK_SYSTEM_PARAMETER primary key (NAME);
Again, if I rewrite the procedure to the following (only difference is the red X.), it works:
create or replace procedure ztm_get_debug_level is
vc_pkg_name system_parameter.name%TYPE := 'DEBUG_LEVEL_PKG_BASE_KEYS';
vn_error     services.debug_log_level.debug_level_id%TYPE := 30;
v_debugLevel   system_parameter.number_value%TYPE;
function get_owner return varchar2 is
    cursor c1 is
    select owner from all_tables where table_name = 'SYSTEM_PARAMETER';
    v_Ret_Val VARCHAR2(30);
BEGIN
    OPEN C1;
    FETCH C1 INTO v_Ret_Val;
    CLOSE C1;
    RETURN v_Ret_Val;
END;
begin
DBMS_OUTPUT.PUT_LINE('AAAA - ' || get_owner);
select s.number_value
into   v_debugLevel
from   X.system_parameter s
where s.name = vc_pkg_name;
DBMS_OUTPUT.PUT_LINE('BBBB');
exception
when no_data_found then
    NULL;
when others then
   DBMS_OUTPUT.PUT_LINE('p_get_debug_level.WHEN OTHERS');
   raise;
end;
This procedure exists in 4 other environments where there are no issues. It can't be a privileges issue as the table is owned by user X and as you can see by the lookup (which was added for debug) against ALL_TABLES the owner is clearly X. So, why can X not select from it's own table unless we include the owner?
Thanks,
Thomas

PS CS5 not seeing scanner in File Import

I've upgraded from CS3 to CS5 and PS doesn't see my scanner in File > Import.
I looked in the CS3 PS Import/Export folder and see a TWAIN.plugin, but don't see one in the CS5 PS Import-Export folder.
Should I copy the TWAIN.plugin into the CS5 folder? Or is interacting with scanners handled differently in CS5 vs CS3?
The scanner is a Canon LIDE 600F, and if I launch CS3 I can scan no problem.
Thx,
Steven

You'll need the TWAIN plug-in for CS5 (moving the old one from CS3 or CS4 is NOT a good idea)
http://kb2.adobe.com/cps/828/cpsid_82824.html
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4687
After you install the TWAIN Plug-in, you will likely need to run Photoshop in 32bit mode because most scanners have 32bit TWAIN drivers.

DNG 7.4.137 will not see my NEF files!!!!

I just upgraded to Camera Raw and DNG converter 7.4.    I also just started with a new computer with Windows 7 Pro.
My version of the DNG is 7.4.0.137
My camera is a Nikon D90
Using Photoshop and Bridge CS6
Computer is Windows 7 Pro
When I open the DNG converter, it asks where the images are to be converted.   When I Select   the directory the NEF files are in , it says no files match my search.   This is with the camera memory card in a card reader. I also get this if I copy the NEF files from the camera card directly to a directory on the hard drive.
If I open Bridge CS6 and go to Get Images from Camera,   it will see the memory card in the card reader and see the files, and they can be converted.   BUT if I copy to the hard drive, there is no way I can find them and convert the NEF files to DNG!!!!! That sucks!!! and if I do convert them to DNG in Bridge from the memory card, when I open in Photoshop, I see they are camera raw 7.1.   I thought I had installed 7.4?????

And if you don't want to convert all, consider a batch file, like:
"C:\Program Files (x86)\Adobe\Adobe DNG Converter" -cr7.1 -dng1.3 -p0 %*
You can drop raw files onto such a batch file to convert them.
PS - As far as DNG contents are concerned, there is no difference between ACR7.1 & ACR7.4 (i.e. having the latest acr version only matters when there was a DNG-affecting change in that version).
Note: I recommend use DNG version 1.3 if you don't need DNG v1.4 (e.g. for lossy compression, or fast-load data) - why? for maximum compatibility with other apps that are not yet up to speed with 1.4 (e.g. exiftool, although Phil believes next release 9.25 will provide full support).
R

Time Machine does not see original backup file on Time Capsuel after reset.

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

I saw a post on another discussion about this subject, and one user found this workaround:
2) Start the backup via wireless connection. Stop the backup. Unplug external HD and plug in via USB or FW (you want FW800). Time Machine appears smart enough to continue your backup in a manner that is useable by the AEBS.
This only makes sense for the first backup (or if you have a lot of data for one particular incremental backup), as it removes the whole convenience factor of wireless.
The post got this reply:
Thx for your #2 tip on using Time Machine with an Airport Extreme Base Station, then switching to a wired connection. Worked perfectly.
Started the TimeMachine b/up wirelessly, allowed it to run for a couple minutes, then stopped it, unplugged the USB drive from the AEBS, plugged it into the computer directly via FW400, opened TimeMachine and it recognized the Disk. Ran TimeMachine via the wired connection, after it finished I ejected it, plugged it back into the AEBS, initiated the AirDisk in the finder, then opened TimeMachine and presto!!
Awesome tip. Note: this works for first-time TimeMachine wireless backups only. Saved me over 40 hours of wireless waiting!!
http://gizmodo.com/370017/how+to-use-time-machine-with-an-airport-extreme
Can anyone confirm that this will work?

Time Machine does not see back-up file on Time Capsule

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

LR2.1 Can Not See Existing DNG files

I am getting the "could not be used because original file could not be found" message from an image in a *collection*.
When I open the Show in Explorer and then the "locate" dialogue the file box is completely empty. there are no "supported files" to see.
When I go to the folder menu and look, the same folder is filled with DNG files, even the one "not seen" in the previous step.
Since I have lots of changes to many of the "not found" DNG files in that folder, I'd like to get LR to see them again.
"Synchronize Folder" doesn't do it.
Any suggestions would be wonderful!
Windows XP LR 2.1
DNG's originally imported from NEF's.
Bill M
Vero Beach FL

When I navigate to the folder that LR suggests, it's empty. Since the only files LR will permit in that folder view are "supported files", I can't force it to show "all files."
The file is there
1- I can see it in Windows explorer
2 - other files in the same collection are visible on "show in exlporer"
But the files that have lost their links have *really* lost 'em :>)
We'll see if the update helps...
Thanks for the suggestions.
[The way the DNG's were created was a simple check box in the import dialoge: "Import as DNG" for the NEF's]

Not seeing Portable Document File in the Content type listing

Newly downloaded and installed Firefox doesn't have Portable Document File format option in the Content Type listing. I have downloaded Adobe Reader 11 which is working fine parallely. The Plug-in's and Add-Ons have all been set correctly.
Basic issue, not able to view PDF files via Firefox

See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them
*https://support.mozilla.org/kb/disable-built-pdf-viewer-and-use-another-viewer
You can rename (or delete) the mimeTypes.rdf file in the Firefox profile folder to reset all file actions.
*http://kb.mozillazine.org/mimeTypes.rdf
*http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

DW 4 not seeing GoLive .site file!

Similar Messages

Maybe you are looking for