DW 8.0.2 Novell Server System and FTP log-in and Password encryption

I think I have found a bug. Dreamweaver 8.0.2, Windows XP,
and using Novell server system. In the Novell system using Dynamic
Local User, at each log in to Novell the user is assigned a unique
SSID each and every time. Unfortunately Dreamweaver uses the SSID
for the encryption key for Login and Password for the settings in
an FTP Site. So these saved settings break at each log in to
Novell, and give an error at the launch of Dreamweaver when it
attempts to log into the FTP site set up.
Dreamweaver saves the FTP Site Login and Password settings
at: HKCU\Software\Macromedia\Common\Sites\-Site0\Keychain
TechNote 3491671c does not fix the problem as it only fixes
the settings location - which is fine.
Anyone have any ideas on how to fix this?

bikeman01 wrote:
> As I said the problem was fixed up to php 5.2.5. Going
to php 5.2.6. has
> broken this again. I don't know what has changed in php
5.2.6 that might cause
> this.
>
> Are you able to confirm this problem in php 5.2.6?
No. I have installed PHP 5.2.6 on a different machine, and
tested the
XSL Transformation server behavior. It works exactly the same
as in 5.2.5.
> If confirmed, what is the process for raising a bug and
will Adobe fix it?
I cannot confirm the problem, so there's nothing I can see
for Adobe to
fix. However, the correct channel for reporting bugs is
through the form
at the following address:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Even if a problem can be identified, it's highly unlikely
that Adobe
would issue an updated version of the 8.0.2 hotfix. The
hotfix worked
perfectly with the version of PHP that was current at the
time. Since
then, CS3 has been released, and CS4 is being officially
announced next
Tuesday. If a fix is required (and I don't believe one is),
the normal
policy is to supply it for the current version of
Dreamweaver, not one
that is no longer on sale.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Similar Messages

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • Advice on Server system that can handle video and more

    Our Xserve died and right now we have a temporary fix, I know it last long. We are looking into purchase a new whole system. Our workshop consists of three branches Video, Photo, and Graphic with 15 Mac Pro workstation and use Final Cut Studio. We would like a system that is fast, reliable, and with fiber capabilities. Cause, I'm clueless on how to build a system. Any advice on what is the best system, a list or anything?
    Thank you
    Luis

    There's no single "best" here.
    You could configure a new Xserve to match or better the specifications of your failed Xserve boxes; if the failed box is more than a few years old, then a minimally-configured Xserve will probably have specifications past your old one.
    Gigabit networking is integrated.
    You'll need to add a Fibre Channel (FC) Host Bus Adapter (HBA) if you're using external SAN storage, or (if it is compatible) transfer the FC HBA over from the previous system. (Check that you have the correct slot for it when you order the new box; you'll need to have a PCI-X or PCIe slot, depending on what the previous HBA required.)
    If you're just looking for a whole lot of disk space and not re-using some existing SAN configuration, then adding a SAS adapter or analogous and an after-market external storage (RAID) array to your Xserve can usually get you equivalent capacity for less.

  • I open Gmail and it logs in without password protection, which I want.

    How do I force password protection?

    Try logging out and logging back into gmail, when you log back in make sure that the box is not checked to remember you. If that dosen't work then go to the password manager and remove gmail/google from there.

  • Recreate .vmx and vmdk discriptor file and merge snapshots

    Hi all,
    I am running ESXi 5.0 and I'm missing the vmx and descriptor file of a particular VM.
    The machine is running fine untill I shut it down. After shutting down I will not be able to restart it before I have recreated the descriptor file and created a new .vmx.
    The only files which are in the VM folder are:
    -rw-------    1 root     root        23152713728 Sep 19 22:43 TS1-000001-delta.vmdk
    -rw-------    1 root     root                  0 Sep 19 22:14 TS1-b4014f27.vswp
    -rw-------    1 root     root        80530636800 Sep 19 22:38 TS1-flat.vmdk
    -rw-------    1 root     root        20166422528 Sep 19 22:14 TS1_1-000001-delta.vmdk
    -rw-------    1 root     root       107374182400 Sep 19 23:03 TS1_1-flat.vmdk
    -rw-------    1 root     root                  0 Sep 19 22:09 vmx-TS1-3019984679-2.vswp
    I was able to recreate the disk descriptor file and mount it to a new created VM with the same specs as the old one.
    It will boot, the only problem is that the disk does not contain the last data of the snapshot. So it is pretty useless now.
    So my question is: Which step do I have to follow (and at what moment) for merging the snapshot disk with it's parent?
    I have a backup of the unmodified vmdk's and the snapshot files listed above.
    I hope that someone can point me in the right direction.
    Thanks in advance.
    Used sources: Missing vmx and vmware.log file and VMware KB:    Recreating a missing virtual machine disk descriptor file

    Hi, thank you for your quick reply.
    For keeping the post short, I renamed the virtual disk names in this post.
    Actually they are named like this:
    Windows Server 2008R2 (HTH) TS1-000001-delta.vmdk
    Windows Server 2008R2 (HTH) TS1-b4014f27.vswp
    Windows Server 2008R2 (HTH) TS1-flat.vmdk
    Windows Server 2008R2 (HTH) TS1_1-000001-delta.vmdk
    Windows Server 2008R2 (HTH) TS1_1-flat.vmdk
    vmx-Windows Server 2008R2 (HTH) TS1-3019984679-2.vswp
    It also does not correspondents with the virtual machine name because we renamed it in a later stage (that is were the confusion started and we deleted the folder with the old name where the log files and vmx was still there.
    Can I just rename your posted files to the above names and follow the procedure you described?
    Thanks in advance.
    PS. can I delete the .vswp files?

  • How do you clear system and application logs in a server?

    Hello all,
    How do you clear system and application logs in a server?
    thanks,
    mike

    go to start button,all programs,assosories, System tools T event viewer. now select application & rt click & clear & do not save.similarly do for sytem too.

  • How to Integrate Client system and Server system?

    How to Integrate Client system and Server system?
    A scenario which is working successfully in server system, not working in client system.
    help me out in this issue.
    pankaj.

    Hi Bhavesh,
    server system means where we have xi inst.
    client system means where we have only GUI inst.(front end).
    The scenario working in server system (picking file and posting it in to the target place)
    but the same not working in client system.

  • Does server versions has also language pack and system restore function?

    hi,
    do you have also for windows server language pack that you can install and change from language ?if yes from which version of windows it exists and which version of windows has such a function.
    2- does windows servers versions  has as the windows 7,8 system restore function ? if yes from wich version of it ?
    thanks
    johan
    h.david

    Hi Hovhannes,
    Windows server 2012 R2 does not have the same windows restore feature as a client OS. You would need to run daily backup of the OS then you would be able to use a version of the system recovery.
    http://www.techrepublic.com/blog/data-center/how-to-restore-a-system-image-in-windows-server-2012/
    Windows Server does also have language packs that you can download depending on the version of the server OS you are looking for and language your require. These can be downloaded from the MSDN site. 
    hope that answers your questions?
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • On upgraded Server system, kerberos dies and is relaunched every 10 seconds

    Upgraded a 10.4 Server system to 10.6 Server. The 10.4 server wasn't running kerberos, but it appears that the 10.6 server decided it was necessary for some reason. As far as I know, I'm not using it for anything, although open directory says that it is 'Running'.
    However, in my system.log, I see this, over and over and over, every 10 seconds:
    Dec 2 17:56:05 caliban sandboxd[108]: kadmind(80480) deny network-bind 0.0.0.0:944
    Dec 2 17:56:05 caliban sandboxd[108]: kadmind(80480) deny network-bind 0.0.0.0:0
    Dec 2 17:56:05 caliban edu.mit.Kerberos.kadmind[80480]: kadmind: Cannot set GSS-API authentication names.
    Dec 2 17:56:05 caliban com.apple.launchd[1] (edu.mit.Kerberos.kadmind[80480]): Exited with exit code: 1
    Dec 2 17:56:05 caliban com.apple.launchd[1] (edu.mit.Kerberos.kadmind): Throttling respawn: Will start in 10 seconds
    Thoughts? Imaginings?

    Same issue here. In my case, though, it's a pretty fresh install.

  • MCX From OD has no impact on users coming in from Novell Server

    Well I'm in the process of trying to build my first real image now with 10.5. I've had a Alpha image which was nothing more than an upgrade of my 10.4 image. I have it running on 2 machines in the general populas and thats been going ok. Most of the problems reported I have either been able to work out or attribute to something which won't be here next year anyways.
    The image I'm working on now is for our Art department. Working with 10.5.2 I'm trying to provide the students with a whole home directory, but completely local. I add my OD server 1st to "Directory Utility". At that point I can login with users from it and MCX stuff is working properly. If I login as a local user again MCX stuff is acting the way it should. Then I add my Novell server to "Directory Utility" for authentication. At this point Local users and users from my OD server still are working properly. MCX is still controlling the dock and so forth as they should. However, when I go to authenticate to my Novell server I can login, but MCX doesn't appear to be playing a role at all!
    Please keep in mind I use this same config already in 10.4 and I have no problems right now... Everything works great. A side from the difference of OS 10.4 in the current enviroment and me trying to use 10.5.2 for this image everything else is the same software wise. I'm still in the same WGM group I was in for 10.4. As far as "Directory Utility" goes the only setting I changed is for the Novell setup... NFShomeDirectory variable is set to be "#/Volumes/Local_Homes/$uid$" instead of "#/Users/Guest".
    Now when users log in the first time a home directory is created for them on login (this happens in my login hook) and most things seem to work properly. The user gets to the desktop and they have a home directory everything looks good except they don't have any of the MCX stuff! Unlike when I login as a local user or OD user I have full run of System Preferences (except of course for those settings which require Admin privileged). If MCX was taking place I would have a dock with Apps and access to only like 2 pref panes in System Preferences.
    Initially I thought this was happening because the 1st time the user logs in they don't have a home directory... Maybe login hooks happen AFTER MCX so without a home things didn't happen.... However if this was the case then the 2nd login should be perfectly fine, but its not.
    Right now "Directory Utility" is configured with elementary.gatewayk12.org (OD with all MCX and Staff users) 1st in the policy list and gatorm.gatewayk12.org (Student users) 2nd or last in the policy. Both servers are listed in the authentication tab again in that order. In the past this was enough to get MCX to come from Elementary, but auth as a student to Novell... I tried reversing the order, but that didn't make a difference either.
    Something I noticed about when a student logs in authen to Novell.... When they first login this appears in the log:
    Apr 16 16:38:49 Art-Lab-19 /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient[775 ]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users" authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["Ziggy_Topp", password]]) == -14177 (Unable to set extended node credentials for /LDAPv3/gatorm.gatewayk12.org.)
    Apr 16 16:38:49 Art-Lab-19 /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient[775 ]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentials:"Ziggy_Topp"]) == -14177 (Unable to set node credentials for /LDAPv3/gatorm.gatewayk12.org with record name Ziggy_Topp.)
    Apr 16 16:38:49 Art-Lab-19 /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient[775 ]: MCXD.gatherUserInfoFor: ODUGetRecordGroups( Ziggy_Topp )) == -14177 (Unable to set node credentials for /LDAPv3/gatorm.gatewayk12.org with record name Ziggy_Topp.)
    Staff members from Elementary looks like this:
    Apr 16 16:41:00 Art-Lab-19 /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient[910 ]: _LSSetDefaultSchemeHandlerURL("http") == -10813
    Apr 16 16:41:00 Art-Lab-19 /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient[910 ]: _LSSetDefaultSchemeHandlerURL("https") == -10813
    Apr 16 16:41:00 Art-Lab-19 /System/Library/CoreServices/ManagedClient.app/Contents/MacOS/ManagedClient[910 ]: _LSSetDefaultSchemeHandlerURL("ftp") == -10813
    Apr 16 16:41:08 Art-Lab-19 com.apple.loginwindow[901]: Password for root on localhost?
    Apr 16 16:41:08 Art-Lab-19 com.apple.loginwindow[901]: lpadmin: Unauthorized
    This repeats again at the end of the login session:
    Apr 16 16:41:40 Art-Lab-19 com.apple.loginwindow[901]: _LSSetDefaultSchemeHandlerURL("http") == -10813
    Apr 16 16:41:40 Art-Lab-19 com.apple.loginwindow[901]: _LSSetDefaultSchemeHandlerURL("https") == -10813
    Apr 16 16:41:40 Art-Lab-19 com.apple.loginwindow[901]: _LSSetDefaultSchemeHandlerURL("ftp") == -10813
    The same message for Staff members happens when I login with a local user too.... Checking with my 10.4 client as a reference the same login stuff is also seen over there not only for OD users and local users, but also for Novell Users.
    One last thing I tried was to enable "Mobility" in my group. Since the mobility prompt normally comes up as soon as you authenticate I wanted to see if it would in this situation. For Local and OD Users the prompt came right up about Mobility... Unfortunately for my Novell users no message at all... I tested this against my 10.4 image and I had the prompt for all 3 types of users.
    So am I doing something wrong now? There was a bunch of stuff in my login hooks that had to be rewritten to be more 10.5 compatible so maybe I am doing something in my config wrong. Could you maybe point me to a document that explains explicitly what is required for on a client for MCX to work properly? With NetInfo gone I'm not really familiar with how MCX is done now in 10.5.... I've done some research on the net but there isn't a lot documented right now about 10.5 and magic triangle style configurations. Of course any other info or thoughts are also greatly appreciated.

    Wanted to add some more notes here. I sat down last night with my Novell guru and we tried some experiments to see if we could limit down this problem. I'll say up front that we were unsuccessful.
    Anyways our first thought was to strip down the Unix template as far as we could. Using Penn States guide on how their 10.5 clients were setup we got it down to the point where all we had was "User" and "Default Attribute Types". Bare minimal config. Still no go. Same symptoms as previous where login is flawless, but there are no MCX preferences in play for the user. They have free rain on the computer like they were an admin more or less. Same MCX errors in the log as previously shown.
    After that we wondered if our group ID could be throwing it off. To test this we set the "PrimaryGroupID" field to "#20" (20 is the local staff group.) Still no joy though. Same problem with the same errors.
    Finally we were curious if it had something to do with rights in regards to maybe writing to the eDirectory. We binded the machine to eDirectory as an Admin user and we still had the same results. On a side note I don't bind any of my machines normally.
    Looking through the logs we still haven't found anything outside of those 3 error lines to tell us whats going on. Again this stuff works perfectly fine with local users, users authenticated from our 10.5.2 Mac OD Server, AND from my OpenLDAP server running in Slackware Linux which has all of the OD schema stuff installed... All 3 no problems. Only when I try to go to eDirectory does this happen.
    I think whats starting to worry me the most is we are suppose to buy more Mac's next year to start shifting some more of our existing ImacDV machines out of play. They will run 10.5 since thats the way they come from the factory now. We also plan to buy about 150 licenses of 10.5 to get all the teacher machines we just bought in September up to X.5 as well. All of these machines need Novell authentication and they all require MCX controlled security and preferences... This is not a good thing at all and I bet some of you guys who also have this problem are in the same boat!
    Message was edited by: Jesse Smillie

  • No System Addres Book After Migration and MTP Status

    I have finished migrating Groupwise 8 from Netware to SLES 11 SP3 in a test environment and have run into two issues. This test system has no internet access (would it be possible to give it access without interfering with the production GW server?).
    One, there is no system address book available although sending to another user in the system appears to work when you type their common name (the auto populate does not work, however).
    Two, when viewing the POA using the http monitor page, the MTP Current Status shows as Unavailable for both Send and Receive and the Inbound and Outbound TCP/IP addresses are both blank (maybe due to no internet access?).
    I have checked my Post Office link and it is configured as TCP/IP with the correct IP address. I followed the Caledonia guide to moving Groupwise and I moved all components of groupwise.
    What did I miss?
    Thanks,
    Scott

    Hi Laura.
    I have not upgraded anything yet to 2012, everything is still GW8. I did not have the BIND EXCLUSIVELY checked for any of the agents. I have now done so for webaccess, the mta and poa. This did not make any difference.
    I also started the mta first, then the poa, as I don't know what order they start up in when the server starts or when using the rcgrpwise command but again this did not make any difference.
    Looking at the mta http monitor, I also see "mtp unable to open connection [8925]". How do I troubleshoot this? When I installed SLES 11, I did not enable the firewall, so that should not be blocking it. The mta and the poa are using default ports, 7100 and 7101 respectively and both list the correct ip address after the move.
    I am also going to try a rebuild on the wpdomain.db to see if that helps. What else can I look at?
    Thanks,
    Scott
    >>> On May-28-14 at 5:16 AM, in message <[email protected]>, laurabuckley<[email protected]> wrote:
    Hi Scott,
    Sounds like your wpdomain.db database is having issues. Did you start
    the MTA first, let it update to 2012 and then start the POA?
    No internet access should not interfere with your MTA functioning
    correctly.
    On your GroupWise agents, have you clicked the BIND EXCLUSSIVE for the
    IP addresses in ConsoleOne?
    Let us know how it goes.
    Cheers,
    Laura Buckley
    Technical Consultant
    IT Dynamics, South Africa
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below...
    laurabuckley's Profile: https://forums.novell.com/member.php?userid=122
    View this thread: https://forums.novell.com/showthread.php?t=477296

  • Windows update KB2964444 broke Event Logging Service and SQL Agent Service on Windows Server 2008 R2

    I got the following problem:
    I discovered that on my Windows Server 2008R2 machine the event logging stopped working on 04/May/2014 at 03:15.
    Also, SQL Agent Service won't run
    The only change that day was security
    update KB2964444 - Security
    Update for Internet Explorer 11 for Windows Server 2008 R2for x64-based Systems, that was installed exactly 04/May/2014 at 03:00. Apparently, that's what broke my machine...
    When I try to start Windows Event Log via net
    start eventlog or via Services
    panel, I get an error:
    C:\Users\Administrator>net start eventlog
    The Windows Event Log service is starting.
    The Windows Event Log service could not be started.
    A system error has occurred.
    System error 2 has occurred.
    The system cannot find the file specified.
    I tried:
    restarted the OS (virtual on the host's VMWare).
    re-checked the settings in services menu -they are like in the link.
    checked the identity in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eventlog -
    the identity is NT
    AUTHORITY\LocalService
    gave all Authenticated Users full access to C:\Windows\System32\winevt\Logs
    ran fc /scannow - Windows Resource Protection did not find any integrity violations.
    went to the file %windir%\logs\cbs\cbs.log -
    all clean, [SR] Repairing 0 components
    EDIT: Uninstalled the recent system updates and rebooted - didn't help
    EDIT: Sysinternals Process Monitor results when running start service from services panel (procmon in elevated mode):
    filters:
    process name is svchost.exe : include
    operation contains TCP : exclude
    the events captured are:
    21:50:33.8105780 svchost.exe 772 Thread Create SUCCESS Thread ID: 6088
    21:50:33.8108848 svchost.exe 772 RegOpenKey HKLM SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
    21:50:33.8109134 svchost.exe 772 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8109302 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services REPARSE Desired Access: Read
    21:50:33.8109497 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services SUCCESS Desired Access: Read
    21:50:33.8110051 svchost.exe 772 RegCloseKey HKLM SUCCESS
    21:50:33.8110423 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8110705 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Desired Access: Read
    21:50:33.8110923 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8111257 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS Desired Access: Read
    21:50:33.8111547 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services SUCCESS
    21:50:33.8111752 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS
    21:50:33.8111901 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    21:50:33.8112148 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS
    21:50:33.8116552 svchost.exe 772 Thread Exit SUCCESS Thread ID: 6088, User Time: 0.0000000, Kernel Time: 0.0000000
    NOTE: previoulsy, for
    21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    I also got NAME
    NOT FOUND error ,so I created the new string value for the Parameters with
    the name ServiceDll and
    data %SystemRoot%\System32\wevtsvc.dll (copied
    from the upper HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog key)
    and this event now is
    21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    I also checked for the presence of wevtsvc.dll in
    the place and it's there.
    Also, I tried to capture all events with path containing 'event' and
    got following events firing every several seconds:
    21:38:38.9185226 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Tag NAME NOT FOUND Length: 16
    21:38:38.9185513 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\DependOnGroup NAME NOT FOUND Length: 268
    21:38:38.9185938 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Group NAME NOT FOUND Length: 268
    Also, I tried to capture all the events containing 'file',
    excluding w3wp.exe,
    chrome.exe, wmiprvse.exe, wmtoolsd.exe, System and it shows NO attempts to access any file ih the time I try to start
    the event logger (if run from cmd - there are several hits by net executable,
    not present if run from the panel).
    What can be done?

    Hi,
    I don’t found the similar issue, if you have the IE 11 please try to update system automatic or install the MS14-029 update.
    The related KB:
    MS14-029: Security update for Internet Explorer 11 for systems that do not have update 2919355 (for Windows 8.1 or Windows Server 2012 R2) or update 2929437 (for Windows 7
    SP1 or Windows Server 2008 R2 SP1) installed: May 13, 2014
    http://support.microsoft.com/kb/2961851/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

    regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

    Hi Jason
    I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
    the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
    I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
    Just a thought, obviously try at your own risk but it worked for me.
    Kellen

  • Endeca Server performance issue: dgraph is slow and not always available

    Hi, I'm experiencing a problem with Endeca Server. It's very slow and the dgraph process takes about 97% of the cpu without doing queries.
    When I try to open the Studio Page, the cpu utilization of the dgraph process increases up to 200%, and if I try to launch a simple query from Integrator the result is:
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
         <env:Header/>
         <env:Body>
              <env:Fault>
                   <faultcode>env:Server</faultcode>
                   <faultstring>Error contacting the conversation service on data store 'SocialIDData' at port 7011: Error parsing data version from DGraph response.</faultstring>
                   <detail>
                        <ns2:Fault xmlns:ns2="http://www.endeca.com/MDEX/conversation/2/0" xmlns:ns3="http://www.endeca.com/MDEX/lql_parser/types"/>         
                   </detail>
              </env:Fault>
         </env:Body>
    </env:Envelope>
    If I try to ping the Data Store by visiting the url http://192.168.2.16:7001/endeca-server/admin/SocialIDData?op=ping sometimes the response is positive, and sometimes it's negative.
    I've also checked the log file in ${ENDECA_SERVER_DOMAIN}/EndecaServer/logs/SocialIDData.out and I've found that message:
    MALLOC:   4656726016 ( 4441.0 MB) Heap size
    MALLOC:   4617801000 ( 4403.9 MB) Bytes in use by application
    MALLOC:     23912448 (   22.8 MB) Bytes free in page heap
    MALLOC:      2146304 (    2.0 MB) Bytes unmapped in page heap
    MALLOC:      4865568 (    4.6 MB) Bytes free in central cache
    MALLOC:       198144 (    0.2 MB) Bytes free in transfer cache
    MALLOC:      7802552 (    7.4 MB) Bytes free in thread caches
    MALLOC:        27450              Spans in use
    MALLOC:            7              Thread heaps in use
    MALLOC:     19922944 (   19.0 MB) Metadata allocated
    MALLOC:         4096              Tcmalloc page size
    Endeca fatal error detected in dgraph.
    Segmentation violation detected.
    testbi.localdomain:/u01/app/oracle/Middleware/user_projects/domains/endeca_domain/EndecaServer/logs
    Register state:
    Stack trace:
    Please report this problem to Endeca and include the following information
      1. Endeca software version number
      2. Operating system, operating system version, and hardware platform
      3. Any other information that you can provide (including core files)
      4. The contents of this message
    Process map:
    00400000-049b4000 r-xp 00000000 fd:04 2590868                            /u01/app/oracle/Middleware/EndecaServer7.5.1_1/endeca-server/dgraph/bin/dgraph
    04bb4000-04c11000 rw-p 045b4000 fd:04 2590868                            /u01/app/oracle/Middleware/EndecaServer7.5.1_1/endeca-server/dgraph/bin/dgraph
    04c11000-04c69000 rw-p 00000000 00:00 0
    As you can see at rows 16-17-18 that's a problem with the dgraph, but I have no idea on how resolve it.
    My system configuration is:
    OS: Oracle Linux 6
    OEID 3
    Can anyone help me? Thank you.
    Samuele Scattolini

    Please contact Oracle Support at http://support.oracle.com for assistance.  Thanks.

  • Can't remotely connect to my server if I automatically set date and time

    Hello.
    I have configured my OS X 10.6.2 server and am able to remotely manage it.
    The only ports I have opened on my router is for Mail and VPN services.
    Things work perfectly because I can connect using VPN to iChat, iCal, Address Book, Server Admin, Workgroup Manager, AFP, FTP and such.
    The problem is that on my laptop from home, or wherever, if its time is set to update automatically from an NTP server (I have tried with Apple's as well as my server for the NTP Servers) then I cannot connect to my server at all...
    The moment I turn off the auto date and time and reconnect to the office's VPN, I am able to use Server Admin, AFP, FTP, Workgroup Manager, Screen Sharing, etc, etc, etc.
    It's utterly frustrating because I have to open system preferences, disable the automatic date and time update, connect to the VPN and do stuff on the server. Then I have to disconnect from VPN and re enable the auto date and time.
    Could someone explain why this is happening and any possible solutions I might be able to try?
    Thanks in advance,
    Felipe.

    OK, after some testing things seem to be working now.
    I opened the NTP port for my server (So I don't have to be on VPN to update the time)....But regardless of that, Server admin and my corporate site work fine.
    Here is my problem, I don't understand why it's working now when 30 minutes ago I was having trouble connecting to my server regardless of what NTP Server I used.
    The only service I can't access is Workgroup Manager, but I don't know if that is supposed to be accessible only locally (though it doesn't matter since I can screen share but I would still like to know).
    Thanks in advance,
    Felipe.

Maybe you are looking for

  • Acrobat XI Pro brings up Adobe Application Manager in Danish, then quits.

    I can't even select "Accepter" and then it quits Acrobat. I have a full creative cloud membership. Why is application manager getting in the way ? All of my other Adobe apps are working fine. I have tried uninstalling Acrobat Pro then re-install. I h

  • Using AJAX to load city, state, metro area based on zip code

    I'm new to getting APEX to work with AJAX properly. I've been reading some tutorials and trying to apply what they do to my situation, but I'm running into a problem. I have a text field item for zip code. What I want to happen is that when someone e

  • 2nd generation ipod for mac

    someone please refresh my memory. i seem to remember that apple made two different versions of ipods then, one for windows and one for macs. and that the one for windows shipped with musicmatch software on it. here's where my memory gets fuzzy. i see

  • What kind of error?

    I have this error! org.apache.catalina.core.StandardWrapperValve invoke GRAVE: Servlet.service() for servlet jsp threw exception java.lang.NullPointerException at org.apache.jsp.reset_jsp._jspService(reset_jsp.java:62) at org.apache.jasper.runtime.Ht

  • Problem with AIR Flash CS3 Italian version

    I have installed the Adobe AIR update for Flash CS3 italian mac version but in the welcome screen I don't see the Flash File (Adobe AIR) preset.I know about the fix that consists in deleting the folder HD:/Users/<username>/Libraries/Application Suppo