DW CS3 AP div display problem

I created my site in a Dreamweaver 8. When I opened up my
index page (and all the other pages for that matter) for the first
time in CS3, it looks like DW completely ignored the Left and Top
attributes of two of my AP divs (which were called Layers in
previous versions). However, when I preview it in the browser, it
looks fine - here is the address:
http://www.juliecollinsrousseau.com
while in Dreamweaver, all AP divs, nested or not are all to
the very left side of the page:
http://www.juliecollinsrousseau.com/images/dw_snapshot.gif
Please advise!

scribblejulie wrote:
> I created my site in a Dreamweaver 8. When I opened up
my index page (and all
> the other pages for that matter) for the first time in
CS3, it looks like DW
> completely ignored the Left and Top attributes of two of
my AP divs
I'm surprised that your page was created in Dreamweaver 8. It
looks more
like Dreamweaver 4 code. What's probably causing the problem
is the
missing DOCTYPE at the top of the page. Put the following
right at the
top of the page, above the <html> tag:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Similar Messages

PHP MySQL data display problem

I am having trouble getting data to display on my web page.In Dreamweaver CS3, I created a new page.
Selected PHP as the type.
Saved it.
Connected a database and created a recordset (all using Dreamweavers menus. I did not write any code).
NOTE: The database is on a remote server.
The TEST button displayed the records from the recordset with no problem.
On the new page, I then typed some text.
Then dragged some fields from the Bindings tab to the page.
I saved it and then went to preview it in my browser.
The page comes up completely blank. Not even the text shows.
I then saved the page as an HTML page.
When I preview this in my browser, the text shows, but the fields and data do not.
I then tried creating a dynamic table (again, using the Dreamweaver menus.).
A similar thing happens, ie. If I save it as an HTML, the text shows and the column labels and border shows, but no data.
Nothing shows if I save it as a PHP file.
I can view the data online using files created by PHPMagic, so I know the data is there and retrievable.
It is just in pages created in Dreamweaver that don’t work.
What am I doing wrong?

My web server supports PHP. I can disply PHP pages created by other software packages, just not the Dreamweaver ones.
Frank
Date: Thu, 4 Jun 2009 19:04:03 -0600
From: [email protected]
To: [email protected]
Subject: PHP MySQL data display problem
To view php pages - or pages with PHP code in them - in a browser, the page must be served up by a Web server that supports PHP. You can set up a testing server on your local machine for this purpose. Look for WAMP (Windows), MAMP (Mac), or XXAMP for some easily installed packages.
Mark A. Boyd
Keep-On-Learnin'
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.
It might not even have been intended as a reply to your message.
>

Photoshop CS3 has encounted a problem

I installed CS3 under my Administrator username. If I start PS CS3 extended under a different username login, the program starts OK, but will not open any files except camera raw files. The program displays the message "Photoshop CS3 has encountered a problem and needs to shut down...". Even if I save a camera raw image into a psd file when logged in under the different username, I cannot open that file when logged in under the different username.
My question is: Is this normal behavior?
My systems is:
Dell M6300, XP Pro SP3, 3GB ram, 72.3GB free disk space, PhotoShop CS3 extended Version 10.0.1

Well, but are your user priviliges set correctly? If you add users post-creation of a folder/ file, they will never inherit any info about that user, thus operating on such directories does fail. The only exception is, when you log on the first time on a freshly created user account, but even then it will only affect user directories and standard system directories. Also remember that to actually do some work you have at least to be a Power User or otherwise you may not have permission to read and write any files, regardless of their location.
Mylenium

CSS and DIV alignment problem in IE6

I am working on a new site based on a DW template. I have
modified the right layout slightly for a flash header and also for
a footer div. I am also using alternate CSS files to fix IE6
display problems.
The site looks correct in IE7 and Safari, but in IE6
something is causing the right DIV to collapse. I have tried
adjusting the padding and margins for the divs in the alternate css
file several times with different results.
Does anyone have suggestions on how to correct this that I
might be overlooking.
site can be viewed at
http://www.lasnapshotz.com
Thanks in advance.

Sorry typed the link wrong originally. Here is the real link:
http://www.lasnapshotz.com

Spry horizontal menu display problems

I have two display problems with a horizontal spry menu bar
that I added in Dreamweaver CS3:
(1) In Firefox, it displays underneath a flash movie. I've
tried fiddling with the z-indexes and still can't get it to display
right. I embed the flash movie using SWFObject.
(2) In IE, the submenus display very in a broken way
sometimes and sometimes they don't. I don't know how else to
explain it.
You can see then menu here:
http://www.davisbrotherscabinetmakers.com/dbmc/
And here is a link to my SpryAssets stylesheet, which I may
have ruined beyond repair!
http://www.davisbrotherscabinetmakers.com/dbmc/SpryAssets/SpryMenuBarHorizontal.css
Any help would really be appreciated! Thanks.

I am not the world's best coder and I have spent forever
trying to
learn and figure out some problems on a menu bar i have
created using
the base dreamweaver spry framework. It looks exactly like
what i want
it to look like on Firefox, Safari, and Google Chrome,
but--of
course--- Internet Explorer is creating massive dificiulties.
Namely,
the drop down menu is completely non-existent. I tried
changing the IE
hack to float right, rather than float left and then the menu
appeared
but with all the subsequent boxes lined up in a row. Here are
my
links, can anyone help me?
http://www.agellsworth.org/index2.html
http://www.agellsworth.org/SpryAssets/SpryMenuBarHorizontal.css
Thanks alot,
bob

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Display Problem with RowHeader of a Scroll Pane

Hi,
I am trying to display row headers for a table using another table
Here is the code
import javax.swing.*;
import javax.swing.table.*;
public class RowNumberHeader extends JTable {
protected JTable mainTable;
public RowNumberHeader(JTable table) {
    super();
    mainTable = table;
    setModel(new RowNumberTableModel());
    setRowSelectionAllowed(false);
    JComponent renderer = (JComponent)getDefaultRenderer(Object.class);
public int getRowHeight(int row) {
    return mainTable.getRowHeight();
class RowNumberTableModel extends AbstractTableModel {
    public int getRowCount() {
      return mainTable.getModel().getRowCount();
    public int getColumnCount() {
      return 1;
    public Object getValueAt(int row, int column) {
      return new Integer(row + 1);
}and then
        JTable displayTable = new JTable(...);
        scrollPane = new JScrollPane(displayTable);
        JViewport jvp = new JViewport();
        jvp.setView(new RowNumberHeader(displayTable));
        scrollPane.setRowHeader(jvp);the problem I have is that when a row is selected inside the row header, some rows go blank and you can see the selection is all screwed up. I tried setting the selection mode to ListSelectionModel.SINGLE_SELECTION but that didn't help.
A refresh of the entire screen (minimize/maximize) seems to resolve the problem. I am using jdk1.4.1 in Windows 2000.
Any ideas?
Sylvain

Again the problem is that when you click on the row headers, some row header rows go blank (completely white) so you can't see what they show.
ie say I have table
Row 1 - 1 2 3
Row 2 - 2 4 5
Row 3 - 5 7 7
Row 4 - 5 6 7where Row X is the row header. So for example, if you click on Row 2, you will get something like
Row 1 - 1 2 3
Row 2 - 2 4 5
      - 5 7 7
Row 4 - 5 6 7until the screen is refreshed or you click some other row header.
hmm ok, I added calling repaint on the table whenever a row is selected and at least the display problem goes away; however, the selected indexes from the event don't always match the index of the row selected. I think actually that may be the source of the display problem.
Here is the code I added in the constructor:
        getSelectionModel().addListSelectionListener(new ListSelectionListener()
            public void valueChanged(ListSelectionEvent e)
                System.out.println("Header table selection is: First = " + e.getFirstIndex() +
                                   " Last = " + e.getLastIndex());
                RowNumberHeader.this.repaint();
        });

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

My original post, locked by this forum. Display problem related

Hi G5 Gurus,
The display problem first, we all know when screen savers display, a click on the mouse will bring you back to the active desktop, this was how it worked., but now, sometimes a click cause the G5 to sleep!
As for the sleep, I dare not to put it to sleep these days, because I am afriad it may cause a fire by over heating. Sometmes, actually four times in the past few months, my G5 could wake up by itself, followed by a extrem high speed running of the cooling fan, it sounded like a hair dryer running in the same room. Sometimes the sreen could light up, just like real wake up, sometimes, it was black. No clicks the mouse or keyboeard could bring it back to normal, I had to press and hold the power button to turn it off.
This crazy problem happened for the first time last summer, a dead hard disk was the cost. Apple replaced it, but failed to detect the cooling or power or display problem. I was given one month extended free service, but right after its end, the problem was back and happened even more often.
Please let me know if any of you had the same problem and please advise what to do.
100s Gs of thanks.
Songyan
iMac G5 Mac OS X (10.4.8)
la teller
Posts: 1
From: Los Angeles
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 10, 2007 2:21 PM in response to: Bad luck G5
I have the EXACT same problem. In fact, I could not have described it better myself. What gives? I brought it in to the "genius" bar and they repolaced the power supply free of charge but the problem is still there. I noticed they ordered a new logic board but did not end up replacing it after all. Did you have yours replaced and did it work? Is this a known issue?
imac G5 17 inch Mac OS X (10.3.9)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 11, 2007 1:20 PM in response to: la teller
Hi La teller,
Thank you for your reply. The 'genius' here in London only replace the dead hard disk, which I belive was a victim of this problem. I was told they couldn't find anything wrong with the power supply or the cooling system.
Now at lest I know I am not the only bad luck guy. Let's wait and see if others are having the same problem. I am not sure if this is a known issue to Apple, even if it is, it may take years before they can offer a recall or free repaire. I noticed that some G5s have already been suffering from power problems and a free repaire was offered.
Thank you again and hope Apple can take our concerns into their consideration soon.
Songyan
iMac G5 Mac OS X (10.4.8)
stopha6
Posts: 1
From: US
Registered: Jan 12, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 12, 2007 7:43 AM in response to: Bad luck G5
Hello,
I'm also having this problem (fan running, won't come out of sleep), just spoke with an apple care rep. He confirmed my suspition that it was software, not hardware as I have just had the logic board and power supply replaced.
His suggestions were to:
1. Run disk repair from the startup CD
try running OS X from a firewire drive and see if the same behavior happens or
perform and archive and install.
When the fan starts to run like that it means the OS is not communicating with the hardware properly. The OS could be somewhat corrupt if you were having hardware issues beforehand, hence the need for a reinstall. I will be performing an archive and install after the disk repair, I'll let you know if it fixes the problem!
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 12:52 PM in response to: stopha6
Hi Stopha6,
Thank you for your message. I never imagined it could be a software issue, cos it looked so hardware.
Please keep me updated with your progress.
By the way, as I said in my old posts, a hard disk went dead when this happened for the very first time, how do you read this?
Thank you.
Songyan
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:58 AM in response to: stopha6
Hi Stopha6,
After reading your reply again, I realized that the system had already been reinstalled. As I said when it happened for the first time, the hard disk died with it, which was replaced, of course with a new OS X, but the same problem is still happening. May this suggest that it is not just a software problem? Thank you. Songyan
iMac G5 Mac OS X (10.4.8)
AG-Nate
Posts: 5
From: Pismo Beach,CA
Registered: Aug 26, 2006
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 3:38 PM in response to: Bad luck G5
The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on. The screen-saver and sleep problem you describe sounds like something that may just happen on accident. But this sounds mostly like a software problem. Try making sure to always quit all non-apple products and see if anything changes.
eMac, iMacG5 Mac OS X (10.4.7) 800mhz 1gig ram, 2ghz 2gigs of ram
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:50 AM in response to: AG-Nate
Thank you, Ag-Nate. I will try as you adivised but I con't think the fans were activeted my intensive CPU using. In most of the cases, the problems happened when the Mac was sleeping, when the minimum CPU were being used.
iMac G5 Mac OS X (10.4.8)
Timothy Klein
Posts: 15
From: Denver, CO, USA
Registered: Dec 6, 2004
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 31, 2007 1:02 PM in response to: AG-Nate
"The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on."
That's only partly right. A hard-working process will make the fans run at high speed, of course.
But, the OS is in touch with the firmware of the iMac, telling it how to run the fans, based upon information the OS X kernel is getting about the state of the hardware.
If the firmware loses touch with the OS for some reason, and is not getting instructions on how to run the fan, it will default to running them at full blast, to be on the safe side (and this "full blast" fan mode is way louder than anything you'll generally experience during normal usage, I know from experience).
So it may not be so simple as a hard-working cpu process kicking the fans on.
iMac G5 17" 1.6 GHz Rev. A Mac OS X (10.4.8) 1 GB Ram
Kensall
Posts: 2
From: London, England
Registered: Feb 2, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 9:05 AM in response to: Timothy Klein
Hi I have a 20" G5 imac it's about 18 months old and I am having the same problem, It freezes and the fan runs really loud. It's nothing to do with software as my I.T. guy has done a complete re-install. All of our admin people have imacs of differring ages and the flat panels are all OK but every one of the G5s has had a booting problem. Some fell into the recall for replacement logic boards but the one I have at home is the newest and doesn't. I'm waiting for my apple reseller to get back to me, but it looks like it's the logic board and as none of the serial numbers fall into the recall, I'm expecting a big bill. I'm really disappointed as I've been a professional apple user for over 15 years and have grown to expect a certain amount of honesty and integrity from them. Looking at all of the discussion boards and the amount of people complaining of the same problem the logic boards are defective and apple should be replacing these free of charge.
i mac G5 Mac OS X (10.4.8)
a brody
Posts: 15,170
From: Silver Spring, Maryland. Don't forget to backup your data!
Registered: Dec 23, 2000
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 10:27 AM in response to: Kensall
Kensall,
Welcome to Apple Discussions!
As in the other thread I wrote:
Being from England, you may find the repair program under these pages:
http://www.apple.com/uk/support/imac/repairextensionprogram/
http://www.apple.com/uk/support/imac/powersupply/repairextension/
Check both of them as they refer to different models.
If neither of yours is under the program, please start a new topic thread so someone can help you.
http://discussions.apple.com/forum.jspa?forumID=881
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
iMac C2D 2.17/20 inch/iMac G5 1.8 1st gen/iMac G4 800 Mac OS 9 Mac OS X (10.4.8) EyeTV 200, Canon PS A530 , Epson P-R220, iSight, Airport Extreme, 5th Gen iPod

I am having a very similar problem. My G5 imac has already had the logic board replaced from the leaking capacitor problem. 8 mos. later the power supply was replaced under the second recall program when it failed to start up.
It had been working now for almost a year, when about 3 mos. ago I started to experience the sudden dimming effect - if the display was untouched the screen would dim about 30% similar to a laptop in energy save mode. I checked and none of these types of options were set in the pref panes. At the same time I would have the iMac go to sleep after a while from non-use, and then when I tried to wake it it would stir for a few seconds and then go right back to sleep. It took 2-3 attempts to wake it up.
Then last week, as I tried to wake it, it just shut down instead completely. I had to hold the power button down to recycle it to get it to come back to life (3 times).
Today was it - I found what I thought was a sleeping iMac, but it will not power up at all. I opened the back cover and the power supply is working, but I cannot get the board to energize, I reset the PMU, but the #2 LED won't even blink. It is completely dead.
Basically every time I used this computer I held my breath that it would not work. After 2 recalls I still only get 9 mos. out of it? Apple is really starting to show it is like the "big" computer makers, the quality is going right down the tubes.
iMac G5 Mac OS X (10.4.4)

Why is netflix having display problems on my macbook pro... HDCP compliance?

Watching Netflix and all of a sudden it says "Display Problems" Make sure your monitor is HDCP Compliant and is not setup for mirror airplay??

The issue is from Safari defaulting to HTML5 vs using Silverlight like it did in Mavericks.
So the options are, if you want to use Safari goto your Netflix account, playback preferences and turn off HTML5. This will revert to Silverlight and will AirPlay fine*in Safari.
If you want to use HTML5, just leave the setting for HTML5 on in Netflix and use Chrome, Firefox, etc.
You can't currently have both Safari and HTML5 Netflix when using AirPlay. You'd think Safari would be a little bit more powerful with Apples stances on browser extensions.

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

Adobe Photoshop CS3 had encountered a problem V10.0.0.0

Photoshop V10.0.0 will not open. It crashes as its loading the Twain drivers at start up. I am running Windows XP.
I've tried deleting the preferences file, reloading Photoshop and, as a desperate measure, deleting and reloading CS3. Nothing has worked. I tried upgrading photoshop but still no luck. Set my default printer to PDF, still nothing. Disabled my firewall, still nothing.....
The worst bit is its been working quite happily since June 07 and then in late Nov early Dec it decided not to work. I also had a printer problem during this time and reinstalled the printer software, but photoshop wasn't working before I did that.
The error I get is:
Adobe Photoshop CS3 has encountered a problem and needs to close
Error signature App Name: photoshop.exe
AppVer 10.0.0.0
ModName: unknown
ModVer: 0.0.0.0 Offset 0.0.0.0.0.0.0.4
Any assistance would be great - I am getting desperate!
Regards
Sally

When I uninstalled my Dell 944 printer Photoshop worked. When I reloaded my printer it crashed again. It seems to crash everytime it loads the TWAIN part of the photoshop opening screen.
I've tried downloading and installing the latest driver from Dell for the printer but its 2005 and the same as the one I have so no luck there.
I still need my printer to work (its my scanner as well) but I am desperate to get Photoshop back! Any clues??

Weird event display problem in week view

Hi. I'm getting a weird display problem in week view. First time this has ever happened.
Some events appear to be missing, but when i double click on where I know the event is supposed to be, a new event is created (as excepted), and the missing events suddenly appear. When i move forward or back by a week, and then return to the week in question, the missing events are gone again. But, I can see the missing events in day view or month view.
Any ideas?

Dean,
Next, try reinstalling the Mac OS X v10.6.2 Update (Combo).
If that is unsuccessful:
1. Use iCal>Export...>for each one of your individual calendars.
2. Delete all but one of your calendars.
3. Create a calendar and name it "Test."
4. Delete the calendar which remained after step #2.
5. Quit iCal.
6. Remove the iCal plist, and drag the iCal plist file to your Desktop.
7. Log out/in or restart.
8. Restart iCal and use iCal>File>Import...for each one of the calendars that you exported in step #1.
9. Delete the "Test" calendar, and any "Home/Work" calendar which was automatically created when you opened iCal in step #8.
;~)

Windows 7 64 bit on iMac display problems and instability

I received my iMac 27" quad core with 8 gig ram & 2 x 1 TB hard drives last Friday. I'm using Boot Camp to run windows 7 64 bit on maximum 2560 x 1440 screen resolution.
I get intermittent but often display problems in windows 7. I get areas of the screen covered in little yellow dots or blue squares (never red artefacts.) This will happen at random areas of the screen, inside an open window, around borders of windows and so on. Most often the screen will go black and come back with a message in the bottom right corner of the screen saying 'Display driver has stopped responding and has recovered' with the sub message saying 'display driver ATI radeon family stopped....etc'. Sometimes I lose the screen wallpaper. Once I've had the system just shut down, once I've had Photoshop seize up and I had to do a cold reboot. Could this be an overheating problem or resolution too high problem or driver problem? Windows 7 tells me my drivers are up to date. I tried installing the drivers for the card from ATI's website which made no difference
The reason I bought a Mac is because it's the only effective way to code for the Mac family of OS's in XCode. The reason I didn't just attach a miniMac to my PC monitor was because there's rather a lot of advertising by Apple about the fact that you can use a Mac with a PC OS via Apple's own Boot Camp. Now I have a lot of Windows software (some of which is not available for the Mac or requires buying again) sitting on an unstable system. Any ideas would be much appreciated...

Sorry, that thread got moved for edit and as a user tip... which I didn't want and won't be doing....
Here is the post:
A tip and workaround for how to get ATI mobility/laptop drivers so that Windows no longer thinks the ATI is a desktop card:
http://discussions.apple.com/thread.jspa?messageID=11286987
Summary (my own edit steps):
1. Install Boot Camp 3.0 and upgrade to 3.1
2. Uninstall graphic drivers and run Driver Sweeper
http://www.guru3d.com/category/driversweeper/
instead of:
removing the crashing driver by going into windows 7 setup via its install cd and deleting the ati driver manaully
3. Install ATI Mobility (link)
4. Uninstall ATI (Programs control panel?) Device Manager (rollback; uninstall?)
5. Device Nanager: update driver and BROWSE BACK to 8.681 (the original apple driver that was causing freezes and purple artifacts) - navigate to /Apple/Drivers/ATI
(Apple uses) a 4850 card in the iMac, its modified a bit for apple. Enough that desktop drivers don't work, and modded-for-laptop desktop drivers don't work either.
Now the upshot of using modified drivers is that it FORCES the catalyst control panel to be installed, meaning you get a few more options to mess around with the card.
I couldn't use the original apple drive, it locks up, the newer one had banding, the newer radeon drivers direct form ATI wouldn't work until they were modded and then they cause black screens.
SO the solution, as obscure as it was, was to download ACTUAL mobility Radeon drivers - version 10.3 still, but made for laptops.
http://support.amd.com/us/gpudownload/Pages/index.aspx
THESE drivers I was able to install - and here is where things changed.
THIS driver changed they way windows saw the video card in device manager.
As I mentioned before, its NOT a desktop card, its a modified laptop card, but installing mac drivers makes windows THINK its a full desktop card, and running the original 8.681 driver crashed it.
Once installed 10.3 LAPTOP driver it now appeared in device manager as a MOBILITY card.
+These Steps "should" work:+
delete ATI driver manually
reinstall apple driver after that and see if that works,
otherwise try the steps above
(mod drivers, remove via windows recovery off setup disk, install laptop drivers, reinstall apple driver over it)

2x iMac G5: Both Logic Board and Display Problems, Warrenty?

Hello,
Thank you for looking at this topic.
I am Jeroen from The Netherlands and proud owner of several Mac Mini's, iMac's and Macbook's. I have 2times the iMac G5, a beautiful machine, but both not working since 2 months.
I have two times the iMac G5 with iSight, both have logic board and display problems.
The first iMac doenst start at all, black screen, i hear the chime, but nothing happening. After a minute i see one horizantal white stripe but nothing happens.
The second iMac has weird horizantal stripes also, but the computer starts. It gives a finder and questionmark icon. After a while the fans go crazy.
Both these symptons are widely known on the internet. I would like to get this fixed, but prices are crazy. And because this is a common issue I would expect to get this fixed for no costs. I have contacted several Apple resellers but they shown me high prices and bad services. On these forums I've saw people in the USA who get this fixed free of charge.
Does anyone has any advice for me? I'll call apple USA this morning.
Thankyou for ur time.

Welcome to Apple Discussions.
I know of no repair extension authorization which provides for the repair of either computer you describe beyond its original 12 month period of coverage. If either machine is covered by a warranty extension program provided by AppleCare, then the parts, labor or both required to replace the defective components may be offered at no charge to you. Final determination of eligibility is made at the part level by authorized Apple service providers or dealers and by the specific serial number of the machine submitted for service.
Absent a warranty extension, however, it is quite likely that you will have to pay for the repairs is you elect to have them performed.

DW CS3 AP div display problem

Similar Messages

Maybe you are looking for