DW CS3 does not display confirmation dialog when checking out file

We have 3 developers set up with DW CS3 Version 9 build 3481.
When checking out a file that is already checked out one pc will
display a dialog box to confirm that you want to check-out the file
as it is already checked out by someone else. This is good as we
want this dialog to appear. However on the other 2 pc's there is no
dialog box displayed and the checkout process continues as if the
file was never checked out.
The text of the confirmation dialog box reads as such :
"index.cfm is checked out by first.lastname. Are you sure you want
to override his/her checkout?". I have been through the preferences
and verified that we have setup the sites in the same manner but we
still have this issue.
Is there a known bug regarding this feature? Is there a
preference setting somewhere that I have missed?
thanks

Are each of your developers sharing the same local site?
That's why you are
getting this error if they are. The proper setup would
involve THREE
locations:
1. Local sites (unique to each workstation)
2. Staging server (shared by all workstations)
3. Production server (the live site)
You would have TWO site definitions, which would be -
(for each workstation)
1. Local = #1 (unique location for each workstation)
2. Remote = #2
(for one MASTER workstation)
1. Local = #2
2. Remote = #3
Use the first site definition for day-to-day work and
checking files in/out.
Use the second site definition ONLY for pushing files from
the staging
server to the production server.
That's the only way it will work....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bemor" <[email protected]> wrote in message
news:g3ojq5$4il$[email protected]..
> We have 3 developers set up with DW CS3 Version 9 build
3481. When
> checking
> out a file that is already checked out one pc will
display a dialog box to
> confirm that you want to check-out the file as it is
already checked out
> by
> someone else. This is good as we want this dialog to
appear. However on
> the
> other 2 pc's there is no dialog box displayed and the
checkout process
> continues as if the file was never checked out.
>
> The text of the confirmation dialog box reads as such :
"index.cfm is
> checked
> out by first.lastname. Are you sure you want to override
his/her
> checkout?". I
> have been through the preferences and verified that we
have setup the
> sites in
> the same manner but we still have this issue.
>
> Is there a known bug regarding this feature? Is there a
preference
> setting
> somewhere that I have missed?
>
> thanks
>

Similar Messages

  • My I Pod touch 4th gen does not display as connected when I enter i Tunes

    My I Pod touch 4th gen does not display as connected when I enter i Tunes, although my battery is being charged and my computer recognizes it, the problem persists. I have also tried the apple troubleshoot for this, but it hasn't worked.

    What Apple troubleshooting did you try?  This one?
    iOS: Device not recognized in iTunes for Windows
    B-rock

  • Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

    I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
    I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
    Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

    I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

  • Bridge CS3 Does Not Display Pentax PEF files

    Hi,
    I am running Vista and have Bridge CS3 installed on my Notebook. I updated Bridge to v 2.1.1.9 and have added Camera RAW 4.5. My problem is that Bridge does not display Pentax RAW files from a K20 camera (its on the supported list). DNG and JPG files show correctly. Bridge only shows a PEF Icon for each image. When you double click on the Icon, the file opens in Camera RAW 4.5 correctly and also in Photoshop CS3.
    Can anyone tell me what I need to do to see the PEF images in Bridge?
    Thanks
    Keith

    Revisit the download page, look at the instructions, and make sure you unzipped ACR to the correct folder, and you don't have an ACR in two places.

  • Screen briefly flashes white but does not display the page when the Safari icon or other icons are tapped.

    A problem has just started with my IPAD Air after 3 months of use.
    If I try to open Safari by tapping on the icon the screen  briefly flashes white but does not display the page.
    Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
    Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
    I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
    I have ensured that the ipad is fully charged,  powered it off an on again, and cleaned the screen with a lint free cloth  but the
    same problem keeps occurring.

    I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
    IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it.

  • Display confirmation dialog when opening PDF

    I've been asked to add a confirmation dialog box to a PDF file that includes a legal disclaimer. The dialogue box would display when opening the pdf document and include yes and no buttons to confirm that the user understands and accepts the disclaimer before reading the document. Selecting "Yes" would allow them to proceed, while selecting "No" would close the file. Is it possible to create something like this in Acrobat? I'm running Acrobat Standard 8.
    Thanks,
    Eric

    Hi Eric,
    Yes, you can do that but it's not an easy task.  You need to code the dialog in JavaScript and then use OCGs (layers) for a cover sheet that will remain "on" until the user selects the Yes button in the dialog.  Coding the dialog is a major task to do by hand and I'm not sure if Acrobat 8 Standard has the OCG capability.
    Check out our tool AcroDialogs(http://www.windjack.com/products/acrodialogs.html) for making dialog creation about 100 times faster and easier, and there is an example of a license dialog agreement just like what you are asking for on that page- scroll down to the Document License Dialog Example. But again, that solution was developed with Acrobat Professional and I'm not sure if Standard handles OCGs or not- you'll have to check on that.
    Also keep in mind this is by no means a foolproof security methodology.  However, it does provide a way to ensure the user agreed to the dialog before viewing the rest of the content.
    Hope this helps,
    Dimitri
    WindJack Solutions
    www.windjack.com
    www.pdfscripting.com

  • Ddd does not display source code when loading compiled program

    Hey everyone,
    I'm writing a C program right now and I would like to use ddd. The problem is, the source code window is completely blank. Has anyone ever run into this before? I really don't even know where to start looking to fix this problem. Yes, I have loaded my compiled binary (I can see the assembly instructions in the machine output). I use both awesome and xfce (different sessions) and it does not work in either.
    Here is the relevant configuration info:
    extra/gdb 7.3.1-1
    aur/ddd-syntaxfix
    awesome 3.4.10
    xfce 4.8
    I had to install ddd from AUR since ddd seems to have a bug in it where it will not show the machine code without a fix.
    If you need any other info just ask and I will provide it.

    This Forum is for Forte 4GL or UDS as its called today. I am not sure if anybody is going to be able to answer your question here. Sorry.
    ka

  • I do not see print dialog when I click File Print and thus cannot select a different printer from previous printing.

    When I click File Print, no dialog appears. Instead, printing starts immediately so, I don't get to select a printer. At some point in the distant past (with a previous version of Firefox, maybe), the dialog must have appeared I must have chosen the Office Onenote printer. Now, whenever I print a web page, Firefox always uses that printer.
    I can change to another printer by editing the config file but, I have to do that every time I want to change printers. That's a bit cumbersome. Is there any way to force the print dialog to open when I click File Print so that I can chose a printer that way?
    I am using Firefox 3.6.3 with Windows XP SP3.
    Thanks for you help.
    == This happened ==
    Every time Firefox opened
    == I don't recall exactly.

    I was having this issue, first when trying to "Run" and then after saving the exe and trying from the desktop.
    To solve it, I simply right-clicked the exe and clicked Run As Administrator. Its installing as I type.

  • Imac g4 does not power on, but everything checks out???

    Alas, my (formerly) trusty imac does not power up anymore. I've tried every step in the service manual up to the point of replacing hardware, and so far no luck. Details of the machine, the problem, and what I've done follow.
    The short story is that I'm faced with replacing the power supply and/or the logic board after both passed the diagnostic tests recommended in the service manual. Since they both passed the tests, my hopes for success are not high, but at the same time, replacement costs for the two (if I wind up replacing both) run about the same as a replacement machine on ebay! On top of that, I suspect the diagnostic tests available do not test one power supply output -- so maybe it's bad but I just can't tell.
    I would appreciate any advice on the situation. Also, does anyone know if the power supply for the 1st gen machines (800MHz, 15") is supposed to have both 12V and 5V outputs? Thanks a bunch!
    The computer: iMac G4 flat panel 800MHz, working fine from purchase in January 2002 (right after they came out) until August 2006
    The situation: I moved to Japan. Upon unpacking the imac, it would not power on -- no screen, no bong, no sleep light, no fan noise, nada.
    What I have tried:
    -- taking it to the apple store (they quoted a $500-$800 repair -- ouch!);
    -- opening it up and looking for lose wires, burned out power supply components, etc.: nothing found
    --try new power cable; test line filter: everything okay
    -- reset PMU: no change
    -- test battery: checks out, 3.58v; returned battery to imac, reset PMU: no change to computer (i.e. still no power)
    --test power supply and logic board points as per service manual instructions; 12 V registered at all points. tests passed. But I wonder: I have read the the PS for some imacs are supposed to have a 5V output too, but there is no test for that output on this model. I wonder if there is a 5V output on this model, and if there is a way to test for it?
    for those of you counting, that was 2 resets of the PMU, one before i removed and reinserted the battery, and one after. Both PMU resets were done by pressing the button once and holding for about 1 second.
    thanks any and all!
    david
    MacBook Pro   Mac OS X (10.4.8)   also, iMac G4 800MHz

    Hello and Welcome to Apple Discussions. 
    Whilst some iMac G4 models share similar components many differ subtly.
    Use this website to compare part numbers against model.
    If you download (4.2Mb) this service guide there is a troubleshooting section that may help you.
    kind regards
    mrtotes

  • InternetErrorDlg WinInet API does not display credential dialog box for user in IE10 when proxy is set

    I have set proxy server in IE. I prompt user for credentials using InternetErrorDlg API. Prompt appears in IE 9 and below. In IE10 and IE11 prompt doesn't appear.
    Below is the code sample I have been using.
    DWORD dwStatusCode(0);
    DWORD dwStatusSize = sizeof(DWORD);
    DWORD headerIndex = 0;
    ::HttpQueryInfo(hRequest, HTTP_QUERY_FLAG_NUMBER | HTTP_QUERY_STATUS_CODE,&dwStatusCode, &dwStatusSize, &headerIndex);
    if (dwStatusCode == HTTP_STATUS_PROXY_AUTH_REQ)
    DWORD dwFlags = FLAGS_ERROR_UI_FILTER_FOR_ERRORS |
    FLAGS_ERROR_UI_FLAGS_CHANGE_OPTIONS |
    FLAGS_ERROR_UI_FLAGS_GENERATE_DATA;
    DWORD res =::InternetErrorDlg(GetDesktopWindow(), hRequest, ERROR_INTERNET_INCORRECT_PASSWORD, dwFlags, NULL);

    Refer to the document of InternetErrorDlg function
    https://msdn.microsoft.com/en-us/library/windows/desktop/aa384694(v=vs.85).aspx
    What is the error code returned by InternetErrorDlg function?
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Docx file association is set up correctly but does not display Word icon when viewing in Explorer

    Problem with MS Word as part of MS Office 2007 Professional Plus running on Windows 7.
    When I view a folder in Windows Explorer all docx files show up with a plain white icon, not a Word icon. I have done the following:
    Start > Control Panel > Default Programs > Associate a file type or protocol with a program.
    Then scrolled down the display and selected the docx extension - it already shows as Microsoft Office Word - clicked on Change Program, reset the program to WordPad, then back in the display clicked on the Change Program icon again. This tiime I reset it
    to Microsoft Office Word.
    However when I go back into Explorer the icon has not changed. Even if I close it down and restart it again. And even after a reboot.
    Also, I have checked the individual properties of the docs files, using Explorer, and they do say Open With Microsoft Word. So no problem there either.
    Any suggestions welcome as to how to change it so the icon displayed is Word not blank.

    Hi orchestrand,
    I have the same problem as you and after searching for a day for a definitive solution, i have found this one that works on another forum located here: http://www.sevenforums.com/tutorials/49819-icon-cache-rebuild.html
    The reason seems to be that icons stored have for some reason disappeared (inexplicably?). The solution is also stupidly simple after i've tried every suggestion in this thread.
    1) go to start menu and search for: cmd
    2) right click on cmd and choose "run as administrator" (--> this causes command line to change from C:\users\<account name> to change to: C:\windows\system32).
    3) turn off everything you are doing after saving your work because now you will be closing explorer.exe
    4) in the command line enter each command separately and with enter following each line
    taskkill /IM explorer.exe /F
    CD /d %userprofile%\AppData\Local
    DEL IconCache.db /a
    shutdown /r
    5) after the restart, everything should be back to normal.
    This is a complete fix for the problem and not a work around and I can verify that it worked for me. Good luck all.
    also, this is a repost, but i think we have the same problem

  • Please help. my images/web page not displaying ( just outlines) when checking in my browser

    Hi. I am using an old dreamweaver. thats not the problem. I
    view my web site in browser to check all ok. When i click my link
    to next page, it will open it in new window as it should do, but
    displays no images (apart from my email link) just outlines.
    Is it my folder location?? it is c:/mywebsites/mywebfolder
    If i open each page directly to view they are all fine just
    when i go from my links..
    Helpppppp please

    Did you define your local site?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "janeie" <[email protected]> wrote in
    message
    news:es3v7h$mo9$[email protected]..
    > Hi. I am using an old dreamweaver. thats not the
    problem. I view my web
    > site in
    > browser to check all ok. When i click my link to next
    page, it will open
    > it in
    > new window as it should do, but displays no images
    (apart from my email
    > link)
    > just outlines.
    > Is it my folder location?? it is
    c:/mywebsites/mywebfolder
    > If i open each page directly to view they are all fine
    just when i go from
    > my
    > links..
    > Helpppppp please
    >

  • Error when checking out file : http access -if http client-receive-1

    Hi Everyone,
    I get an error when I am trying to upload a file to Content Server or when I try and check it out.
    The issue has been resolved by manually starting the service on an OS level.
    What I would like to know is this:
    In transaction SICF, there is a Content Server Interface service, which you can activate/deactivate. Would this have the same effect as manually starting the service on an OS level?
    Please advise.
    Thanks.
    Freddie.

    Hi,
    When you are starting service in OS, you are actually starting the maxdb instance service .
    You can set it in auto mode so that you will not get this error.  The OS service only establishes the connection to SAP.
    As a part of CS install, from CSADMIN part it is just required to send the certificate successfully to OAC0.
    Normally no activity is required to be done to under SICF from CS install point of view.
    Anirudh,

  • Aperture 3 project does not display any images in one Project

    This is a strange situation.  The bullets below outline the situation:
    The project does not display any images
    When I place the pointer over the project it shows there are 500+ images
    I have located the RAW images stored in my aperture library
    I can pull up the images using a smart folder and searching for photos taken on the event day
    This is happening only to one of my projects that I know of (weird!!)
    I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
    I tried the following basics:
    Fixed permissions
    Rebuilt the database
    Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
    Found the images in my Aperture library
    I created another project and drug all of the images into that project
    Any idea how I can fix this?
    My fear is that if I delete the original project, the original master images will be deleted.

    The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
    RB
    One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

  • WinCE Projector does not display flash file properly

    Hi,
    I built a projector application for loading flash files on a
    Windows CE 5.0 based embedded device. I am using Flash player 7 for
    WinCE5.0. The projector was built using embedded VC++ for an ARM
    processor.
    The basic idea of this flash application is content delivery.
    So, this projector loads a container flash file stored locally on
    the device. This container flash file communicates with a remote
    server(webserver or FMS) to retrieve content (flash files, audio,
    video, images, text etc.). Right now, I am trying to load a series
    of flash files from the remote server - one by one - like a series
    of ads.
    The problem is that, the series of flash files loaded does
    not display properly inside the main container file. I am using a
    loader component in the main container flash file. All the flash
    files loaded must play full screen. But some files do not play
    fullscreen. It automatically shrinks to a smaller random size. This
    behaviour does not repeat. It occurs randomly for any of the series
    of files I am trying to load in the container flash.
    When i tested the application on the desktop, it works fine.
    But on the device, the loaded flash files shrink automatically. Can
    someone explain why this is happening? Is this problem usually
    associated with flash player on embedded devices?
    I am stuck with this problem for a long time. I tired
    different methods to get around it, but could not succeed. So I
    would really appreciate it, if anyone can throw some light on this
    issue and preferably provide a solution?
    Thank you,
    Jothishankar

    I am using Flash Professional CS6.
    It lets me edit all the symbols and bitmaps, and key frames.
    However, it just publishes as a SWF a bit incorrectly.

Maybe you are looking for

  • 2 Apps with the same name?

    Hi everybody! I finished my work on two ipad-magazines a few days ago (english/german version). The plan is, to transfer the whole .app package to our customer, who will publish the apps in the Apple App Store himself. Now, there has been a lot of di

  • Can I use object methods in a class

    I have a class ball and I am in the process of creating it's move method. I want this method to make the ball move depending on certain factors. One of these factors being where a bar has been stopped. I have a bar class which extends JProgressBar an

  • [PKGBUILD] Mrxvt with embedding support (for YeahConsole)

    I made a patch for mrxvt that allows the user to embed it on another window, I don't know how well it works, but at least it seems to work with YeahConsole, that is what I wanted it for. The patch: http://ccl.sourceforge.net/tmp/mrxvt-0.5.1-embed.pat

  • Macbook Pro - internet suddenly stopped working.

    The wifi on all the other devices in the house works fine, except on my Macbook Pro. I was browsing the internet this morning, clicking around on Facebook and the like when - poof! No more internet. I have tried everything that google says to try. Ai

  • Change where clause filter based on prompt?

    Hi, I am trying to change my where clause filter based on a prompt selected. What I want to do logically looks like this - although it doesn't work as it is not valid case statement syntax: select * from table t where t.calc_result_info_key in (case