DW CS3 fails to Install in Vista Home Premium

Hi,
My new DW CS3 disk will not install DW to my Vista Home
Premium machine.
I am looged on as admin. I have tried the suggestions on the
support page. Disabled norton, Disabled Google toolbar. Tried to
weed out incomplete Adobe files etc.
Starngely older Adobe apps, Premiere Pro and After Effects
installed with right click and selecting "run as XP program. i have
found no way to do this with the CS3 disk.
A forum search uncovered no new ideas. Two other DW support
forums have been fruitless also.
I need this to run ASAP.
Any help would be appreciated.
Thanks,
Adrian

If that fails to solve the problem, then I recommend you
contact Adobe
directly and use one of your one-on-one support incidents.
http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vidflow" <[email protected]> wrote in
message
news:fp5pi7$jv5$[email protected]..
>I have now tried to install DW CS3 8 more times.
>
> I have tried the following suggestions from listers and
the university
> help
> desk;
>
> 1. running cmd and typing regsvr32 jscript.dll to fully
establish admin
> privledge.
>
> 2. Using AdobeCS3Cleaner in both methos 1 and then 2 to
clean out old
> files
> that might interfere. MS cleaner was installed also as
per Adobe
> instructions.
>
> 3. Running msconfig to do an alternate shutdown of all
non MS program,
> virus
> checkers, etc.
>
> 4. I have used these separatedly and in combination. The
same failure to
> install DW CS3 occurs. DW does not get installed and
shared components
> also
> fail.
>
> This is maddening.
>
> Adrian
>
>
>
>
>

Similar Messages

  • D1660 printer won't install in Vista home premium

    I have tried several times to install this printer; t keeps erroring  giving an error code of:"Fatal error MSI.dot4wrp01, Module C:\windows\system32\hpbmiapi.dll failed to register.
    Here's a list of the corrective steps from the support pages that I've tried:
         Gave all users full permission to \program files, (all sub directories)
         Ran msconfig - selective startup
         disabled anti-virus
         Ran msiexec /unreg and rereg
         checked for Windows updates - returned up to date
         ran sfc /scannow - no defective files found
    every attempt has had the exact same result. I can't find anything else to check/change/try 

    This worked for me (assuming you have atl.dll installed in the System32 folder) after researching:
    1. Go to the Windows/System32 folder
    2. Find CMD.exe and right-click on it 
    3. Choose "Run as Administrator"
    4. At the command prompt type --> "regsvr32 c:\windows\system32\atl.dll" and Enter
    5. Restart the computer and run the HP installation software again
    6. You should be good to go
    BTW, do the HP techies ever Google the error codes???
    tronfab

  • Install error #1620 PrPro Windows Vista Home Premium

    Install error 1620  when attempting to install CS4 "This installation package could not be opened"  (for each component of the software package).   Windows Vista Home Premium 32 bit, Intel i7 processor.   Unable to install any components of PrPro.  This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

    I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
    Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
    CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
    Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
    Also read the article below... I have NOT done this, but it seems to be an easy process
    http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

  • Vista Home Premium/Homesite 5.5 - FTP - running SLOW!!!

    I recently did a clean install of Vista Home Premium and
    installed Homesite 5.5. Everything works great, except it takes 2-3
    times longer to open and save files through FTP & RDS.
    Any ideas???
    Thanks

    LR5 will only work on W7 or W8. Adobe no longer supports Windows Vista.
    LR4 was the last version to work on Vista.
    http://www.adobe.com/uk/products/photoshop-lightroom/tech-specs.html

  • Dreamweaver CS3 Install on Vista Home Prem

    Hi there
    I have just got a new laptop with Vista Home Premium
    installed and I have attempted to install Dreamweaver CS3. The
    first day it seemed to work fine until I got a message stating that
    registration had failed catestrophically. It then shut down and I
    was unable to run it since.
    I have uninstalled the program, checked that all previous
    installs had been unregistered and Installed again.
    When I double click to run the application I get the little
    circle icon that I guess replaces the egg timer in vista but then
    after a second or two it disapears and nothing happens.
    I have tried to uninstal, repair the installation but to no
    avail. I even tried setting the clock to before the time change
    last month as that caused an issue on the XP install on the old
    computer but nothing seems to work - does anyone have any
    ideas?????
    I have had a look around the forums but not really came up
    with anything.
    Thanks in advance

    Thanks SnakEyez02 .
    The Windows restore said that it failed the two times that I
    tried it. But after doing this I tried Dreamweaver again and it
    seems to be working. The registration has failed again however I am
    able to use it. Hopefully one time it wil let the registration
    complete.
    Thanks for your help.
    Brian

  • HELP ACR 4.6 fails to load/work in photshop CS3 running on vista home premium

    Can anyone help me. i had photoshop CS3 on windows xp and it loaded up canon 450d raw files happily/and bridge worked fine- showing raw thumbnails.
    now i loaded onto new laptop running vista home premium and it works that is cs3 but auto installer cannot upload new 4.6 raw update (the last one for cs3) and when i look at bridge thumbnails for raw do not work. and when attemp to load a raw file from my canon 450d into photoshop it says file not type recognised or supported or similar.i have service pack 1 installed i believe with vista.
    just do not know what to do!!!

    Follow the manual instructions from this page:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Thanks, adriana

  • PS CS3 shutdown error in vista home premium

    This just started and I can't figure out what changed.
    I use vista home premium and photoshop cs3. The program works perfectly with no problems until I want to close the program. When I close the program, I get a windows error message saying the program has stopped working and windows is trying to correct the problem. Then a window comes up saying a problem has caused the program to stop working and windows will close the program and notify me if a solution is available.
    Earlier this morning, I had 2 jpeg images open, changed one and tried to save it when an error message told me that a program error occurred and it could not be saved. When I saved it as a psd file, it saved with no problems at all. Could these two be related?
    I re-installed the program without removing it first and in doing so, the messages on screen said it was repairing the shared components so I figured it had found the problem and was fixing it. No joy.
    Has anyone else had this problem? Any solutions?
    Any help would be most appreciated!
    Thank you,
    Randy

    If that fails to solve the problem, then I recommend you
    contact Adobe
    directly and use one of your one-on-one support incidents.
    http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Vidflow" <[email protected]> wrote in
    message
    news:fp5pi7$jv5$[email protected]..
    >I have now tried to install DW CS3 8 more times.
    >
    > I have tried the following suggestions from listers and
    the university
    > help
    > desk;
    >
    > 1. running cmd and typing regsvr32 jscript.dll to fully
    establish admin
    > privledge.
    >
    > 2. Using AdobeCS3Cleaner in both methos 1 and then 2 to
    clean out old
    > files
    > that might interfere. MS cleaner was installed also as
    per Adobe
    > instructions.
    >
    > 3. Running msconfig to do an alternate shutdown of all
    non MS program,
    > virus
    > checkers, etc.
    >
    > 4. I have used these separatedly and in combination. The
    same failure to
    > install DW CS3 occurs. DW does not get installed and
    shared components
    > also
    > fail.
    >
    > This is maddening.
    >
    > Adrian
    >
    >
    >
    >
    >

  • CS3 'freezed' installation problem on Windows Vista Home Premium.

    Hi! I searched everywhere for answer that installation of my PS CS3 is freezed in moment on the screen.
    I installed Acrobat Reader, Dreamweaver cs3 only. Both in English language.
    I tried to uninstall, then install, using cs3clean, but it`s nothing change in my situation. Even I tried to copy whole content of my cs3 installation disk to hard drive.
    Why installation is freezed ? The screen:
    http://img237.imageshack.us/img237/7184/cs3problemja8.jpg
    Ps. I`ve got Vista Home Premium.
    Thanks, best regards!
    Ps2. Sorry for my english :)

    Kasprzak,
    How long did you allow it to sit like this? Only reason that I ask is that I recently did an install on my laptop, and the DVD drive was EIDE and it took probably 20 mins. to get through each disc.
    For installation issues, Adobe offers free tech support. Check your documentation for the toll-free phone number in your country, or region.
    Hunt

  • Error trying to install CS4 design premium on windows vista home premium

    I'm having trouble installing CS4 design premium, as soon as it does the checking system it comes up with an error that says I need windows XP sevice pack 2 and some other windows.  I have Windows vista home premium and all the other requirements, so i'm not sure why it's saying that?  I do have CS3 installed but I didn't want to unistall it before I installed the CS4, cause then I wouldn't have anything to work on.  The CS4 is brand new and I have it installed with no problems on another computer that has windows XP.  Would I have to uninstall CS3 before I try to install it?  I'm afraid that I will be left with neither if I do that and this was not a cheap investment to take that chance.  Does anyone know how I could get CS4 design premium installed?
    Thank you
    Jorge Gonzalez

    You should npt have to uninstall anything except Acrobat for CS4 to install. You can call tech support for free installation support.

  • Not able to install Oracle 10g on Windows Vista Home Premium

    Hi All.
    I bought new Laptop preinstalled with Windows vista Home premium. I tried to install Oracle 10g , but it failed.
    Error: Oracle 10g doesn't support vista sp5. Should be less than sp5.
    Can anybody suggest me, which version of Oracle supports Windows Vista HomePremium?

    hi ,
    please follow up the below link,
    oracle 10g r1 is not supported for vista , but you can put the vista in the xp compatible mode , and then install it...
    http://www.psoug.org/reference/vista.html
    regards,
    Mohammed Mehraj Hussain

  • Installation of Adobe Indesign CS3 on Windows Vista Home Premium

    Hello,
    I can not install Indesign CS3 on my Notebook.
    The operating system is Windows Vista Home Premium SP1.
    The error message contains: "Internal Error 2739".
    It is coming at the beginning of the installation.
    Can anybody please help me?
    Alois Blaimer

    Yes, for installation issues, please call Adobe Technical Support. There is no charge for assistance with installation issues. This is not an issue that you should can expect support for on this forum.
    - Dov

  • Installing itunes 8.1 on vista home premium - please help!

    This is my first ever post in a forum because i can usually work it out from other peoples questions... but i'm at the end of my tether with this:
    I've just bought a new Dell inspiron 1545, o.s windows vista home premium.
    I'm trying to install itunes 8.1 but am getting the following problem...
    I can get to the part where it starts installing, and then it gets to a certain point and just... stops.
    It's not freezing or even giving me an error message, it just stops!
    So i leave it to see if it will start again, and it eventually times out!
    You can understand how frustrating this is because there is no rhyme or reason to WHEN it stops (sometimes 20% complete, sometimes 96% completes - and sometimes it never even starts).
    I've read up on many different forums (i spent 5 hours last night on this) and it seems lots of people are having problem with itunes and vista, but none of the threads contain this actual problem.
    i've tried a few suggestions: delete all history and cookies e.t.c / try opening a different browser before going to the apple site / click 'save' instead of 'run' and alter the name its saved under, but none of the above has worked.
    So basically, if anyone can help, I would dearly appreciate it... it's quite possibly driving me insane.
    Many thanks.

    I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
    You asked what I meant about saving the installer on your PC.
    When you go to the iTunes download page:
    http://www.apple.com/itunes/download/
    And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
    After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
    It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
    I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
    The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
    The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

  • Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; I download; I start installer; installation fails unexpectedly; installer rolls back installation; hardware seems PC capable;

    Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; Safari browser=1, Itunes=2; Apple software updater=3; I download; I start installer; installation fails unexpectedly; installer rolls back installation; PC hardware seems PC capable; I have removed Mobile Me because of New Apple I-cloud Software Sync server registration?
    What should I do with this failure to install Apple software products /declaring/ needing wanting to update and failing the process.
    I have other software to complete the multimedia experience. what should I do with the constant automatic attempt to update
    I can consult Gateway; device drivers web sites; hardware drivers;
    Please Email Deanallen@ a*l.com
    < Email Edited By Host >

    Hi,
    Please try this
    Stop Windows Update Service and BIT Service now.
    Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
    Start Windows Update and BIT service now.
    Then try to download windows update now.
    If doesn't work, please reset the windows update componments 
    http://support.microsoft.com/kb/971058/en-us
    Yolanda Zhu
    TechNet Community Support

  • HP Advisor, for m9040n HP Pavilion vista home premium not working after installing update.

    I have a m9040n hp pavilion desktop with vista home premium.  My hp advisor will not work. When I go to the menue to pull it up the icon has changed and is an icon of white pages. When I select the icon Hp Advisor it gives me a gray dialog box called the file type assistant.  For searching for software to open the file. I've tried to install the sp 43112.exe update recommended for my hp pavilion m9040n with vista home premium but my hp advisor is still not working. Any ideas as to why my installing the update failed?  Is there anything I should do beforeinstalling the update?

    Rkmccoy25,
    I understand you’re stating the HP advisor isn’t working correctly after an update.
    Try doing a system restore back a day or two before the update occurred, if you haven’t attempt that already. Below are the instructions on how to do a restore if you’re unsure.
    How to do a system restore
    Please respond at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • System Recovery Fails on new HDD (HP-DVDs, Vista Home Premium 64-bit, DV4-1225dx)

    I have a Pavilion DV4-1225dx that had a hdd failure. VISTA Home Premium 64-bit.
    Went to purchase the oem HDD @ Tiger Direct (Hitachi 0A56415 Travelstar 5K320 Mobile Hard Drive - 2.5", 5400 RPM, SATA 3G, 250GB, 8MB Cache) but found it was out of stock. I purchased the suggested replacement  (WD Blue 320GB Mobile Hard Drive - Designed for everyday computing - 2.5", SATA 3Gb/s, 5400RPM, 8MB C...)
    The HP System Recovery DVDs runs for over 12 hours and fails. CTOERROR.flg
    ChkErrBB.CMD: Detect some error during PININST_BBV
    ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log
    Besides a video driver not installing I found:
    C:windows\system32\Drivers\enecir.sys has not been found
    The System Recovery is formatting the HDD incorrectly. After the Recovery failure the HDD shows as:
    C: 38.8 GB free of 58.0 GB
    E: 2.02 GB free of 12.9 GB
    hp G71-340US WIN 7 HP 64 Bit
    hp pavilion dv4-1225dx VIsta HP 64 Bit
    hp pavilion zd7000 WIN XP Pro
    hp pavilion xv886 WIN Millennium / WIN XP Pro
    hp deskjet 6980xi
    hp pavilion xt236 / ze4200 WIN XP Media Edition

    Hi:
    If you can still read the 25 character Microsoft Vista product key on the bottom of your PC, you can make your own plain Vista installation media and use that to at least get the OS on your PC.
    Here is how to do that if you can read that key:
    Please click on the link below, click on the Windows Reinstallation Guide [27-07-2013] pdf link on the upper left of the page and then read the instructions for doing this starting on page 302.
    http://philipyip.wordpress.com/dell-community-forums/

Maybe you are looking for

  • Communication through contextual events in ADF 11g?

    hi everyone , I have a requirement that i have to establish a communication between two taskflows and communication between page and the two taskflows at a time through contextual events I'm able to establish a communication between two taskflow regi

  • IDOC Server issue using JCo3

    Hi, u201CI am trying to send MATMAS IDOC from SAP to non-SAP system using JCo3. But it is giving error RFC_ERROR_INTERNAL: COMMUNICATION_FAILURE Cannot lock transaction". I checked this error in  TCode SM58 in SAP system. However, I am able to send s

  • GR/IR clearing all the documents are not clearing

    Dear Experts, In ob74 i have the following setings for my GR IR clearing a/c EBELN EBELP GSBER VBUND ZUONR My client is using F.13 clearing function.  But in that some entries are not clearing. Example of that Assignment               Docment no.  TY

  • How to recover data if one datafile was lost

    if i have a tablespace with 5 datafiles 9i or 10g... it's a fictional scenario :) one was lost during db start up and other 4 was still thre if no backup avail for restore and no archivelog for recreating the datafile how do i recovery data in this t

  • Insert with update......

    Hi, I've this table: desc TAB1 DESCRIPTION VARCHAR2(20); QUANTITY NUMBER; DESCRIPTION........QUANTITY APPLE............. 10 COFFEE............ 7 I'd like to insert into TAB1 a new record, but if the value of description exist, It update quantity with