Dw CS3 Image Viewer Is Not There!

Hi ya'll...I'm in Lesson 11 of Dw CS3 CIB and it told
me to go under Insert/Common/Media/Image Viewer and there is no
Image Viewer there! What do I do? Reinstall DW? Yuk.

They are talking about the Insert menu not the bar with the
buttons.

Similar Messages

Dreamweaver CS3 Image Viewer Flash Element

Here at Cleveland State University, I offer basic training
classes for most Adobe products. We are in the middle of a complete
overhaul of the
http://www.csuohio.edu space. Our
goal to is to create an attractive, website with a consistent look
and feel that makes it easier for our faculty and staff to update
on a more frequent basis. In doing so, we have created a series of
pages that can be easily edited in Dreamweaver CS3. One item we
would like to fully support is the DW CS3 Image Viewer - Flash
Element. However, we have hit a small layout snag.
On the main pages of most college and departmental sites, a
specific space with a finite size is set on a web page for the
image viewer. A site editor then creates images in Photoshop that
are that exact size. The image viewer element is configured to be
that exact size as well. Furthermore, the picture "frame", title,
caption and controls are hidden in the Flesh Element panel.
However, when the page is previewed either in Dreamweaver or in a
browser, the images have been shrunk. There is always a border,
whether it is white or some other color. I assume the color is the
stage color of the Flash .swf file. This causes a misalignment of
the images and the other text.
Another issue is the links that automatically created. Some
of our editors have asked me why, even though they specifically
leave the imageLinks area blank, links seem to be created pointing
to the Adobe.com website.
My questions: is there no way to force the Flash element to
respect the size of the pictures so that no border is showing? Is
there no way to leave the Im
I've done a search on the Adobe.com support site and on the
web and noted that several people have posted questions concerning
this. Unfortunately, no one seems to know what to do about it.
I can send links if you would like to see an example. I'd
greatly appreciate any help you can give me.

>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times.
I'm just a user, like you. And I'd rather you not send things
directly to
me unless I request you to do this. If you have a problem
that cannot be
solved here, then your next option would be to contact Adobe
Tech Support
directly. I'm not very familiar with the Flash side of DW, so
I cannot be
of much help in this regard.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixelfixer" <[email protected]> wrote in
message
news:g0i4ih$r8t$[email protected]..
>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times. I'm hoping he has a solution. I
can't believe
> Adobe
> hasn't fixed this one yet. It's been out there for a
long time it
> appears.
> Allwebco has an image viewer as well that I'm working
with and having
> similar
> results. So, I don't know what to think at this time.
I'm going to try
> to
> work with their tech support today.
>
> Steve
>
>

Dreamweaver CS3 Image Viewer ImageLinkTarget Problem

I'm using the Dreamweaver CS3 Image Viewer component to make
a quick Flash slideshow.
I've set the ImageLinkTarget parameter to "_blank". However,
in the slideshow, mouse rollovers show
a hand cursor, but clicking opens the larger image in the
same browser window. Everything I have read says that
this setting should cause the link to open in a new window or
tab.
I have posted the code. If anyone has ever experienced this,
please let me know how to fix/work around it.
Thank you.

>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times.
I'm just a user, like you. And I'd rather you not send things
directly to
me unless I request you to do this. If you have a problem
that cannot be
solved here, then your next option would be to contact Adobe
Tech Support
directly. I'm not very familiar with the Flash side of DW, so
I cannot be
of much help in this regard.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixelfixer" <[email protected]> wrote in
message
news:g0i4ih$r8t$[email protected]..
>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times. I'm hoping he has a solution. I
can't believe
> Adobe
> hasn't fixed this one yet. It's been out there for a
long time it
> appears.
> Allwebco has an image viewer as well that I'm working
with and having
> similar
> results. So, I don't know what to think at this time.
I'm going to try
> to
> work with their tech support today.
>
> Steve
>
>

Menu selection: Insert / Media / Image Viewer does not exists

Hi,
I cannot see menu Insert / Media / Image Viewer
What am I missing?
My version is from
"Adobe Creative Suite 6 Design & Web Premium"
--BRH

It doesn't exist in CS6. Adobe discontinued this feature because DW is not an image gallery creation tool. It's web authoring software.
If you can work with jQuery, there are dozens of image gallery & slideshow plugins you could use that are much nicer.
Wow Slider
jQuery Cycle 2
Nivo Slider
Nancy O.

IWeb-Images are just not there anymore

My website images are not loading at all. As of a few days ago they just started having trouble. I have had this website for 2 years and i upgraded iLife a month ago. But now the images on my website just won't load. i'm a photographer... how can i work if my images won't show?
Anyone know how to fix this?
www.mkayephoto.com

Your photo show up fine in Safari, but not in FF3. It's FF3 problem, there are three patches for this problem:
http://discussions.apple.com/thread.jspa?messageID=7397410&#7397410
http://discussions.apple.com/thread.jspa?messageID=7418611&#7418611

MS publisher 2010 to PDF using Adobe Acrobat X Pro produces outlines on some of my images that are not there on the publisher file!

I am helping a client publish a book through Createspace. We are both using Windows 8 OS. She created her document in MS Publisher 2010. I made the necessary edits to her book, (111 pages) and saved it as a pdf for commercial printing. The resulting pdf puts lines on some of the images. (All the images are jpg format, but it only happens to some.) I have tried creating the pdf in several different ways including print to PDF, Save as PDF, and Save and Send Wizard for commercial printing. I have also tried deleting and reinserting the images. I don't know what else to try. Does anyone have any ideas.
The image below shows what I mean. On the left is the Publisher File, on the right is the PDF.

I agree with your statement; even for a particular document, if I choose to "Print on both sides" and then print again immediately after, "Print on both sides" will be deselected.
However, I'm not sure what you're implying by you're statement. I'm asking precisely why this setting isn't sticky. Acrobat uses a non-standard printer dialog; in the usual dialog I can easily set a defualt duplex setting. I almost always want to print duplex. Why can't I do this by default in Acrobat?

JS CS3 image rotation value not the same in Photoshop

I might be missing something but when I test the following line:
app.activeDocument.links[1].parent.rotationAngle;
The console returns -20. So if I try and apply this value to a Photoshop script.
app.activeDocument.rotateCanvas (-20);
The result is the image has rotated the wrong way.
Am I doing something wrong?

Thanks Jongware,
To check what I'm rotating I used the following:
app.activeDocument.links[1].parent.constructor.name
this returned Image and to be sure I tried:
app.activeDocument.links[1].parent.parent.constructor.name
This returned Rectangle.
So is the top line rotating the image or the frame? Or do you mean that ID only workers with frames and is not an image editing package so even though it returns Image it's still just the frame holding the image?
Cheers, John.

Select last occorence for each field of view where not there a timestamp

I have a view TEST with the following field Field1 , Field2, Field3, ....
Sample TEST
Field1 .................Field2
1 ...................... Rep7
2 ...................... Rep5
3 ...................... Rep4
1 ...................... Rep1
2 ...................... Rep3
3 ...................... Rep6
I want create a select that give the following result take a distinct field1 with the last occorence of field2
For each field1 I want take the last field2
sample of above the result is
Field1..................Field2
1 ...................... Rep1
2 ...................... Rep3
3 ...................... Rep6
Edited by: user9011634 on 19-gen-2010 16.55

Well, as i told you before, UNLESS the view has an order by statement in it you're out of luck.
You will NOT get consistently ordered results UNLESS you have an order by statement.
So you can try the code posted for you before, and it may work 90+ percent of the time, but i don't know many places where 90% consistency is good enough.
*note, 90% is an arbitrary number, i can only tell you that it will not be 100% (and that's typically the required correctness rate any shop i've ever worked in).

Images viewed in elements organiser appear over saturated compared with acr or editor

Hi,
I've been struggling with this for some time now. When veiwing images in elements organiser (10) the images have started appearing more saturated than in either adobe camera raw or photoshop elements editor window. They used to always match. I've tried reseting all the colour presets, I've tried changing every setting I can find in acr and I've resorted to a full re-install of elements (including deleting the presets). None of thise have solved the problem.
I'm pretty sure it is the organiser view which is over saturated rather than acr / photoshop which is washed out as, although mostly quite subtle, sometimes the colours are pushed much too far. (I'm only describing it as saturation as that's how it looks - I couldn't say for sure that it is acutally a saturation setting rather than some other colour setting which is causing the issue).
Every so often organiser updates it's images as I veiw them to match acr but I've not noticed any one reason why that happens - and if I shut organser down and restart it's back to over saturation again.
Any suggestions would be greatfully recieved,
Stuart Martindale

Ken,
Thanks for getting back to me. You're right - it would seem that if I have every thing set to always optimize for computer screens then everything looks the same. Ideally I wouldn't have that set though - the photos are all taken with adobe RGB colour space and we are more given to big prints than sharing on screen.
This never used to be a problem and I've always previously optimised for printing. The pictures are definitley adobe RGB and checking in canon DPP the raw veiw there is the same as ACR so it is the initial organizer colouring which is at fault. I would rather use optimize for printing as we tend to make big prints from our photos rather than sharing electronic albums. Following the suggestion I've done some more playing with settings and found the following situations:
1) If opening organizer when set to optimize for printing the image opens with the wrong colouring. Changing to optimze for screen and update thumbnial and the colouring corrects. Changing back to optimize for printing update thumbnail and any subsequent changes and the colouring stays correct.
2) If opening organizer when set to optimize for computer screens orgainzer opens showing the right colouring. Chaning to optimize for printing and update thumbnail causes the colouring the change. Changing back to optimize for screen and the image corrects it's self. Changing back to optimize for printing and any subsequent changes and the colouring stays correct.
So in summary the first thumbnail viewing optimized for printing is over satuarated / vivid. Changing colourspace away and back seems to correct the problem.
If the colouring is correct for one photo it will update to be correct for any other images viewed.
If there is a way to make optimized for printing photos display correctly on first opening that would be great.

Ristretto with keyboard/mouswheel navigation (xfce image viewer)

i've always liked xfces lightweight image viewer ristretto, but there were always two things which annoyed me:
1. no keyboard navigation
2. rolling the mousewheel over displayed image just zooms in/out
so today i finally took the sources and changed some lines:
1. navigate to previous/next image with leftarrow / H and rightarrow / L
2. scrolling the mousewheel over current image navigates to previous/next image
3. ctrl + mousewheel to zoom
maybe one of you finds this useful
get it here:
http://aur.archlinux.org/packages.php?ID=25985

Devastator wrote:Great job! That was exactly what I was missing in ristretto .
to be honest, i just had to add about 8 lines of code
damn, i forgot about scrolling when the displayed image is larger than the display area.
anyone got a suggestion on how to handle this?
Last edited by robmaloy (2009-05-04 12:27:04)

CS3 - Design View not showing externally linked images

In CS3 Design View, externally linked images are not showing
up... i am only getting the place holder.
To prempt some questions:
1/ Links are correct and complete - apart from the fact that
they show up when previewing in the browser(s) - i have
crosschecked
2/ There are no spaces in the url
3/ In the 'View' menu, 'Display External Files' is checked
I had this problem before and escargo suggested saving and
rebooting. It worked then but strangely, today, that file is again
showing some of the externally linked images but not all. And on a
new file, created today, none of the externally linked images are
showing up... :(
I'm sure there's a simple solution to the problem... anyone
have any idea what it could be?
Thanks and cheers,
JJ

Nope. Some show - some don't.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jhabrix" <[email protected]> wrote in
message
news:faom5n$9ku$[email protected]..
> Bump....
>
> Anyone have a solution to the above problem???

Is there anyway to create a basic Image Viewer in CS5?

Hello,
Im looking for a really basic Image Viewer - exactly like the one you could create using DW CS3 but od corse it was discontinued. Is there any other way I can create something similar using CS5? or if not can anyone recomend a bsic one on - line without all the thumb Nails and fancy stuff.
Here is a perfect example of what I am looking for.
www.broadsoft.com.au/janielle/test5
Thanks

Log-in to the Adobe Widget Exchange with your Widget Browser.
There are a some jQuery and Ajax powered image viewers & slideshows you can grab for your site.
jQuery Cycle Widget
Lightbox Gallery Widget
Spry Content Slides
Spry Image Slideshow
I don't recommend using a Flash viewer because it's not supported by all web devices.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How do I edit image viewer slideshow created in CS3, in CS4?

I apologize for posting this twice...once in a previous post and once here. The reason being...the other post was old (2008) and I'm afraid it might get overlooked. So I thought I'd create a new discussion.
I created a bunch of slideshows in CS3 using Insert - Media - Image Viewer. I was looking for an easy way for my client to update the site themselves. Even though it creates a Flash element, it is easy for them to go in and switch out the images. All they do is click on the slideshow box, hit Window - Tag Inspector and click on the little folder at the side of the Image URLs' line. Nothing could be simpler. Well...I went in to see my client to show her how to do this but she has CS4. When I tried to do the same thing, nothing looked the same. The tag inspector did not have the same elements in it at all. Does this mean she cannot edit the slideshows I have created? Ugh...
If anyone can help with a work around to this...I'd be very grateful!
Thanks.
Pam

Thanks for your reply via e-mail David. I tried to reply but it's a no reply address so I'm posting here:
Do you happen to know if my client who has CS4 would be able to open the slideshows I created in CS3 using the method mentioned here:
http://help.adobe.com/en_US/Bridge/3.0/WSCF044571-2772-4d28-9EBD-2C9F46AF008A.html
Not having CS4, I can't even play around with it to see. Or will the slideshows have to be recreated in CS4? Has my work in CS3 over the months gone to waste in other words?
Alternatively, would it be better for us both to purchase a $29 Dreamweaver extension such as the one below, so we could both access the slideshow from CS3 and CS4 at the same time?
http://www.dwuser.com/flashslideshow/v3/
I need to keep building the new site using the slideshows while she maintains the old site (no slideshows) until we upload the new site this summer. I don't want to continue building slideshows she cannot access.
Thanks a lot for your help!
Pam

Everything correct, but the images are not there

Ok, with the podcast I do, All Things Gaming throught www.upstatefighting.com, I went throught and added the album art for the cast in the feed that we use. I checked in the store, and the image shows up. But when I resubscribe to the podcast, the album art does not show up in my iTunes browser. When I check the file info for a podcast, the album art is not there. Do I have to embed the file in the music file before uploading, or do I just used the url for the image and it auto embeds when the podcast is uploaded.
I did check the forums here for any similar problem one might have, but nothing seemed to fit what I was dealing with.

XelNaga wrote:
Will that also take care of the image that is listed under the title of the podcast?
Not sure whether you're referring to the Store or subscribing, which are quite different. On the Store page the image is referenced in the feed, in the 'itunes:image' tag. When subscribing, the image which appears at bottom left is embedded in the episode, so it can be different depending on which episode is selected: if you have 'grid view' selected the image which appears in the top section is that embedded in the top episode.

I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!

Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help.

Dw CS3 Image Viewer Is Not There!

Similar Messages

Maybe you are looking for