DW CS3 not importing entire site cache from DW8

Hi;
I upgraded to the CS3 web premium suite from studio 8. My
site caches were
imported but the log on info for each was not. Is there a fix
for this ?
Thanks;
Pat

I dunno. Go into DW8 and EXPORT the site definitions with
their login info.
Import them into CS3.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pat Jones" <[email protected]> wrote in message
news:f4pkcp$1rb$[email protected]..
> Hi Murray;
>
> DW8 is still there and they're both on the same drive.
Only the log on
> info is missing. A while ago, DW8 was having problems
losing the last used
> site's log on due to IE7 (as I understand the cause). I
downloaded a patch
> for that. Any connection?
>
> Thanks;
>
> Pat
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:f4pjkd$111$[email protected]..
>> The site defs should have migrated forward. Did you
install on the same
>> drive? Did you uninstall DW8 before installing CS3?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Pat Jones" <[email protected]> wrote in
message
>> news:f4pj04$7h$[email protected]..
>>> Hi;
>>>
>>> I upgraded to the CS3 web premium suite from
studio 8. My site caches
>>> were imported but the log on info for each was
not. Is there a fix for
>>> this ?
>>>
>>> Thanks;
>>> Pat
>>>
>>
>
>

Similar Messages

Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

Help... Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

Because many of the camera makers slightly alter their versions of their raw format whenever they release a new camera model.
Nikon does it, Canon does it, and also several other camera makers.
There is not a single version of NEF that all Nikon cameras use, nor a single version of CR2 for all Canon models.
Here is a list of supported cameras and the required ACR plugin needed to open the raw files.
Camera Raw plug-in | Supported cameras
Versions of ACR are specific to each version of Photoshop.
Older versions of PS cannot use the latest version of ACR.
You need to download the latest version of Adobe DNG Converter.
This will convert your newer 7100 files to DNGs that can then be opened in older versions like CS3.
Be aware DNG only works on folders of files, not individual files. Select the FOLDER not a single file

Not publishing entire site with all pages from site studio Designer

Hi,
I have created the site with one primary page & one secondary page in the site designer. I must admit that they don't have link to each other. When I publishing this site using Oracle Site studio publishing utility to a subscriber, it is publishing the primary page as index.htm in the destination. It is not pulling the secondary page. But i would like to get the entire site including the secondary page. What needs to be done to get the entire site. If you have any idea, please let me know.
Any help would be appreciated.
Regards & thanks,
Nirmala Vijaya Sekhar Varre

Hi
One way is setting a region in secondary as 'set replaceable' and geting ssURL from the code and link them in primary page.
Thanks
Srinath

CS3 Synchronization Problems (Entire Site)

The following problems occur when I attempt to synchronize my
entire site (954 files) using DW 8 Windows, DW 8 Mac, or DW CS3
Mac. (If I select a group of files, synchronization always works as
advertised.)
1. If I tell DW to synchronize the entire site (in either
direction) and specify that it should delete files, synchronization
eternally builds a file list. DW doesn't hang; I can cancel out of
it and continue to use DW.
2. If I tell DW to synchronize the entire site (in either
direction) without specifying that it should delete files, DW most
often incorrectly announces that no synchronization is necessary.
Immediately afterwards, if I use the icon on the top left of the
files panel and select
Edit | Select Newer Local or
Edit | Select Newer Remote, DW correctly identifies the
files that have changed. I get the same behavior if I do those two
things in the opposite order. In other words, DW simultaneously
knows and doesn't know which files are newer.
Is there a fix or a workaround?

I dunno. Go into DW8 and EXPORT the site definitions with
their login info.
Import them into CS3.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pat Jones" <[email protected]> wrote in message
news:f4pkcp$1rb$[email protected]..
> Hi Murray;
>
> DW8 is still there and they're both on the same drive.
Only the log on
> info is missing. A while ago, DW8 was having problems
losing the last used
> site's log on due to IE7 (as I understand the cause). I
downloaded a patch
> for that. Any connection?
>
> Thanks;
>
> Pat
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:f4pjkd$111$[email protected]..
>> The site defs should have migrated forward. Did you
install on the same
>> drive? Did you uninstall DW8 before installing CS3?
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Pat Jones" <[email protected]> wrote in
message
>> news:f4pj04$7h$[email protected]..
>>> Hi;
>>>
>>> I upgraded to the CS3 web premium suite from
studio 8. My site caches
>>> were imported but the log on info for each was
not. Is there a fix for
>>> this ?
>>>
>>> Thanks;
>>> Pat
>>>
>>
>
>

CS3 DW freezes recreating site cache

I have a brand new iMac (2GB RAM) and just installed CS3
yesterday. I imported my old sites (exported to .ste files from my
PC) and when I go to point DW to my site's files on my local
fileserver (Windows server) all seems to go well until DW starts
recreating the site cache. It counts all the files in the site,
then on about the 2nd or 3rd file it freezes. I've deleted all the
sites I've created and tried to recreate one at a time, but still
no joy. Anyone else seen this?
Thanks,
Wm

Wm,
DW could be choking on a particular file. Try moving all of
your files
to a different folder to see if you can open the site. If so,
then start
moving them back 1 folder at a time to try to isolate the
problem.
HTH,
Randy
> I have a brand new iMac (2GB RAM) and just installed CS3
yesterday. I imported
> my old sites (exported to .ste files from my PC) and
when I go to point DW to
> my site's files on my local fileserver (Windows server)
all seems to go well
> until DW starts recreating the site cache. It counts all
the files in the site,
> then on about the 2nd or 3rd file it freezes. I've
deleted all the sites I've
> created and tried to recreate one at a time, but still
no joy. Anyone else seen
> this?

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

Lightroom 4.4 will not import NEF RAW files from Nikon D610

I shoot a Nikon D800 and have never had any issues importing my NEF RAW files into Lightroom. I borrowed a friend's Nikon D610 and shot a bunch of NEF RAW files. I downloaded them to my computer the same way I always do. For some reason, Lightroom will not import them. The error message is: "The files are not recognized by the raw format support in Lightroom. (455)"
My Lightroom 4.4 is current and up-to-date.
Bottom line: I have a bunch of RAW photo files I can't import into Lightroom for editing. Any help would be GREATLY appreciated!

>Just curious -- is there some difference between the NEF files created on my Nikon D800 (which are easily imported into Lightroom) and the NEF files created on the Nikon D610 (which are not easily imported into Lightroom)
Lightroom 5 supports the D610. There is a big difference between nef from the D610 and older cameras. They were shot with a camera that Adobe hadn't profiled yet when LR 4.4 was out. Otherwise, if you hack the nef files to read that they were shot on a D600, LR 4.4 will read them, but I would caution against doing that as the sensor is slightly different on the D610 than on the D600, resulting in differences in color rendering. Simplest is as dj says to convert the nets to dng (which embeds the newer profiles in the file) or to upgrade to LR 5.

Acces rules not blocking entire site

Hello we are trying to block all url acces to rapidshare (and megaupload, gigasize , etc)
we are using the syntax
http://*rapidshare*/*.* and used also http://*rapidhsare*
then when i type for example
RapidShare: 1-Click Webhosting
i am allowed to get the file
only typing http://*rapidshare*.*/*/*/*.* i'm allowed to block it but i don't know the structure of all the sites, i would like to block the entire site with some generic syntax like "*domain*" for entire site.
How i should block the entire site of rapidshare then?
Thankyou for your replies !

stormo wrote:
>
> cpremo;1547472 Wrote:
> > stormo wrote:
> >
> > >
> > > Hello we are trying to block all url acces to rapidshare (and
> > > megaupload, gigasize , etc)
> > >
> > > we are using the syntax
> > >
> > > http://*rapidshare*/*.* and used also http://*rapidhsare*
> > >
> > >
> > > then when i type for example
> > >
> > > 'RapidShare: 1-Click Webhosting'
> > > ('RapidShare: 1-Click Webhosting'
> > (http://rapidshare.com/files/89231303/2002_Ch_C.rar))
> > >
> > > i am allowed to get the file
> > >
> > > only typing http://*rapidshare*.*/*/*/*.* i'm allowed to block it
> > but
> > > i don't know the structure of all the sites, i would like to block
> > the
> > > entire site with some generic syntax like "*domain*" for entire
> > site.
> > >
> > > How i should block the entire site of rapidshare then?
> > >
> > > Thankyou for your replies !
> >
> > The proper way to block it would be like this:
> >
> > http://rapidshare.com/*
> >
> > or
> >
> > http://rapidshare.com:443/*
> >
> >
> > The 443 is for any "HTTPS" type traffic.
> >
> > --
>
> thanks
>
> typing
>
> http://rapidshare.com/* worked for block the entire site.
>
> But for the https traffic, making this rule
>
> http://rapidshare.com:443/*
>
> can't block
>
> https://ssl.rapidshare.com/premiumzone.html
>
> i should add a wildcard before the domain? and put https?
>
> thankyou
That's because the site address is different. This would be the
address to put in:
http://ssl.rapidshare.com:443/*
The HTTPS setting is as follows:
http://SiteAddress:443/*
So in otherwords drop the "s" from https, enter the site address and
add ":443/*" to the end.

PE11 will not import raw-file (.CR2) from Sony SX50.

PE11 with camera raw 7.2 will not import .CR2 from Sony SX50.
(Camera not supported...)
Sony sx50 is on the list of supported cameras and .CR2 on the list of supported files!

Hi,
ACR 7.3 should aplly to PSE 11 - it is on mine.
If you load the editor, go to the Help menu and see what it displays for About Plug-in -> Camera RAW - see which version is loaded.
There should be an updates option too, towards the bottom of the list - I'm on a PC so it may be different if you are on a MAC
Brian

Does not import all JPG photos from local folders

Hi,
Using Lightroom 5.3 under Windows 7.
Photos are located on local disk.
I received a selection of photos from our research project which I want to import.
Most of the photos have been imported correctly.
However, import of some 500 photos fails.
"synchronize folder" detects the new photos (501)
"synchronize" command reports that "no photos or videos were found to import"
Windows security settings on the files are all the same (inherit from parent folder).
Disk has enough empty space left (56 GB)
The photos are in Jpeg format, typically around 500 to 2000 kB each.
Produced from Photoshop CS5, up to 3267x2244 pixels at 300 dpi.
Photos open correct in other viewers.
Are the any limitations to
- folder and file name length?
- spaces in file names?
Thanks in advance,
Roger.

JPGs will not import for one of the following reasons
you have shot JPG+RAW on your camera and the Lightroom option is set only to recognize the RAWs but not the JPGs from the pair
the JPGs have previously been imported into Lightroom, and so Synchronize or Import will not import them a second time (nor is there a good reason to import them a second time).

Can not import new ebooks(epub) from my iMac to iPad

I have the same problem about the ibook covers and read about the solution. But I have a more serious problem: when I try to import new ebooks (epub) from my iMac to my iPad I see a message saying : 1 part cannot be synchronised.See iTunes for more information. And the book is not in my
The importing I do by dragging the book from my the file in my iMac to the iPad section in iTunes. That worked in IOS 4.3. but not in IOS 5
I also tried by dragging the book from my iMac file to the library in Itunes (that works) and from there to the iPad section in iTunes and that does not work.
Before I try to get the covers back as described in an other post, I have to be sure I can import ebooks in my iPad.
Who can help?
peterwillem

I have to adjust my earlier post a little. Eventually the ebook appears in my iPad ibook library but it took a while. The part of not being sync is probably the fact that the cover is not being sync. Anyhow I only see the dull brown standard cover in my iPad.
It is a shame that the cover issue occurs, if I have to sync all my books again will take a long time.
peterwillem

Pro cs3 not importing audio in avi files

ok it seems for some reason that my cs 3 is not importing audio in my avi files the video channel imports but no audio anyone know a reason why this is please

AVI is but a "wrapper." This ARTICLE will give you much more background, plus direct you on finding out what is inside that wrapper.
It might be as simple as a setting change, but conversion will likely be the path to take.
Good luck, and let us know what G-Spot (in the article) tells you about that/those file(s).
Hunt

ITunes does not import all artists/songs from folder

I have had several issues with getting itunes to import all the music I have. I have selected the folder that I want itunes to be associated with. But when I go into itunes not all the artists imported. However, if I select add a folder, and then the artist, it imports the artist. I have tried to add the whole folder again, but still does not import all the artist/songs. At first I didn't think that I had imported the CDto the folder, but then when I went into my music folder it was there.
A couple of times when I have opened iTunes it was like starting over. I lost my playlists. I am not as concerned in getting those back as long as I won't lose all the changes I am now making. We also own two iPod shuffles, don't know if that makes a difference.
Thanks inadvance for any information!

I had a similar problem with a Jimmy Buffett album,I sent the iTunes store an e-mail described the problem including the album title and receipt number and within 24 hours they responded and had done a "reset" and problem solved.
Give it a try

Bridge CS3: Not importing clips into Premiere CS3

One of the videos on the Adobe site shows someone right-clicking a movie (MOV, I think) and choosing the option to "Open with Premiere Pro CS3".
I created a blank test Premiere CS3 project. From Bridge, if I right-click an AVI and choose to "Open with Premiere Pro CS3", focus switches to Premiere, but no clip is imported.
I'm using Windows Vista.
Any ideas on this one?

Jim, I *am* using Bridge CS3. Version 2.1.0.100
Windows Vista Ultimate
Eddie, yes the video tutorial shows how to open MOV video clips from Bridge CS3 into Premiere. My source clips are Windows AVIs. When I right click a clip in Bridge CS3 and choose the option to open with Premiere (actually the option is "Open With > Adobe Premiere Pro"), Premiere Pro CS3 gets focus (or opens if it's not already open), but no clip is imported.
Interestingly, I got hold of a sample MOV file (CheeziPuffs.mov that appears in the Adobe samples). When I right-click that file in Bridge, I am only given the option to open with QuickTime player. Premiere does not even feature as an option in the context menu.
When I ran up Bridge for the 1st time followin Premiere Pro CS3 and Encore CS3 installation, it popped up a dialog box and said that the new programs had been detected and did I want to register them with Bridge (or words to that effect), which I did. So far, so good. But my AVIs just plain won't open in Premiere when I ask Bridge to do so.

Can't import entire iTunes library from external hard drive

I recently had to reset my IBM ThinkPad T40 (Windows XP) to factory settings. Of course, I backuped up my iTunes library on an external hard drive, and there didn't seem to be any problems doing so. (I've had to do the same thing before) But I can't re-import the entire library now! It only imports about a thousand songs (I had about 5,000), and I get an error message saying "The file iTunes Library.itl~ cannot be imported becuase it does not appear to be a valid exported file.") I also tried to import a previous back-up (stored in a different folder, and it wouldn't import all of those files, either -- no more than in the more recent backup files) either. I've tried re-downloading the iTunes software several times. Help!!!!
Thanks!!!
PS: Is there a way to sync my iPod to import songs from that BACK into itunes?
IBM ThinkPad T40 Windows XP

This seems to have deleted ALL of my iTunes. The folder (and all iTunes files) is still there on my backup, but now the newly-installed iTunes won't import ANYTHING (It at least imported about 1,000 (out of 5,000) songs before. But now it says all files are invalid, regardless of where I attempt to import them from. (although the names of some playlists import -- but they're empty files) It appears that SOME of the music files are located on the backup copy, but simply won't import. Perhaps they're corrupted?

DW CS3 not importing entire site cache from DW8

Similar Messages

Maybe you are looking for