DW CS4 - 2 BUGS Found in 10 minutes

Well, just installed CS4 and found 2 bugs in DW....maybe I
should stop looking...
Anyway -
BUG 1 - if you have simple page with a table and form on
it....then click on the <FORM> tag on the bottom bar to show
the properties - the FORM NAME doesn't show, even though it's in
the code as form1.
BUG 2 - just as the form name doesn't show in the properties
window, neither does the table background colors. Click on a table
tag (that has a bg color) and you'll see it doesn't show....in
fact, it doesn't even have a property for table bgcolor
anymore...

> BUG 1 - if you have simple page with a table and form on
it....then click
> on
> the <FORM> tag on the bottom bar to show the
properties - the FORM NAME
> doesn't
> show, even though it's in the code as form1.
Does in my CS4 on both Mac and PC.
> BUG 2 - just as the form name doesn't show in the
properties window,
> neither
> does the table background colors. Click on a table tag
(that has a bg
> color)
> and you'll see it doesn't show....in fact, it doesn't
even have a property
> for
> table bgcolor anymore...
Not a bug - that's by design. You would need to use CSS for a
table
background color, which you will see when you click on the
CSS button on the
Property inspector.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dstoltz007" <[email protected]> wrote in
message
news:gokaq4$2in$[email protected]..
> Well, just installed CS4 and found 2 bugs in DW....maybe
I should stop
> looking...
>
> Anyway -
>
> BUG 1 - if you have simple page with a table and form on
it....then click
> on
> the <FORM> tag on the bottom bar to show the
properties - the FORM NAME
> doesn't
> show, even though it's in the code as form1.
>
> BUG 2 - just as the form name doesn't show in the
properties window,
> neither
> does the table background colors. Click on a table tag
(that has a bg
> color)
> and you'll see it doesn't show....in fact, it doesn't
even have a property
> for
> table bgcolor anymore...
>

Similar Messages

Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
And the file name would be "MIC and the date file created etc..."
I noticed that these files where all starting with the letters MIC at the front of the filename...
For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
I have the latest Firmware on my MP3 Player.
The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
The tag showed up appropriately and I have had no problems since.
It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

=Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
I used Windows Media Player to sync the files.
I used Creative Central to transfer the files.
These two methods produced results where the file starting with MIC turned into a voice recordings.
I also had problems just copying and pasting the files (using windows explorer).
I have not had any problems with any other file. I normally use MP3Tag to tag my files.
However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
I tried as many work arounds as possible. But once i renamed the file it worked.

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly. When opening a DXF, CC merges multiple layers into one, even if you have the "Merge Layers" unchecked. Can a forum admin employee get this submitted as a bug report? Thanks.

Thank you Larry. I just submitted this bug report pasted below at the link you provided.
******BUG******
Illustrator CC 17.0.0 *always* merges layers when opening a DXF file, even if you have the "Merge Layers" unchecked.
1. Open a DXF file that contain multiple layers in Illustrator CC 17.0.0
2. Uncheck the "Merge Layers" button.
3. Click OK.
Results: It has merge all the layers into one layer.
Expected results: It should open with multiple layers preserved. Illustrator CS6 works properly.

[svn] 4223: Some fixes for bugs found running the TC acceptance tests:

Revision: 4223
Author: [email protected]
Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
Log Message:
Some fixes for bugs found running the TC acceptance tests:
- Empty try {} throwing NPE while emitting code.
- OP_Callproperty and OP_Callproplex may have a known type but default value.
- Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

Re: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
Type the following commands:
takeown /f C:\Windows\*.cdf
cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
2) Unpack the previous Support Pack or Creative official release.
3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
4) Make sure the following files were deleted, otherwise delete them manually:
- For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
- For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL.

Kernel Panic at low battery with MacBook bug found - with solution

Hello All,
I think I've found a bug with Leopard concerning laptops. I started a thread which I'll link to below.
http://discussions.apple.com/thread.jspa?threadID=1219413
Other people have had this same issue - I've seen it on a few different posts. Does anyone know the best way to contact Apple regarding this? I don't know how active they are in reading this forum, and I want to make sure they know about this, as it's probably something that can be fixed with an OS update.
To summarize, I'm including a couple of key posts:
Posted Nov 4th 2007...
Hello,
I just got one of the new November 07 MacBooks. The machine is great, and screams with the pre-installed Leopard.
First thing I did was plug it in to charge as I started configuring software. Once it was fully charged, I pulled the plug, and began using it on battery. My plan was to calibrate the battery, by running it all the way until it forced a sleep, then shutting down and plugging it in again, as Apple recommends.
Problem is, I never got the "Low Battery" warning, or even the sleep warning. At around 10 minutes of power left, I simply got a kernel panic. A few seconds later, the laptop just switched off.
I plugged in again for a few minutes, then ran it down again to see if I could reproduce the error, and I did get the low battery warning.
The next time the battery ran down, it gave me the kernel panic.
Is this happening to anyone else? Is it a new MacBook problem, or a leopard power management problem? I'm having no other issues at all with the MacBook or Leopard. Any help would be appreciated.
Thanks!
Nov 12th, 2007...
Well, It's been a few cycles since the first one, and all is well. I'm getting the low battery warning when it runs low, and no kernel panics (knocking on all available wood). If I start having problems in the future, I'll update this thread, but for now I'm marking it answered. It was probably Leopard not reading the uncalibrated battery correctly.
Dec, 31st 2007.....
Hello all,
Short followup here: I've have 30 successful cycles after the first couple of kernel panics, and it's time to calibrate the battery again. I tried to do it yesterday - charged the battery all the way, used the macbook while plugged in for two hours, unplugged the adapter and continued to use it until I got the low battery warning. I shut down everything and let it sit - waiting for it to go to sleep. Instead, I got a kernel panic, and the computer shut down. It would not restart until I plugged it in, but I know there was some battery left, since it panicked at 2% battery. I let it charge for an hour or so, then used it again until I got the low battery warning. This time, it went down to 0%, but panicked and shut down instead of going to sleep.
I'm trying this again, after charging all the way last night, and just leaving it on to drain. I'm at 20% right now, and I'll post to let you know what happened.
Dec 31st, 2007....
Hello All - I think I've figured this out. Looks like a software bug with Leopard.
I did get another kernel panic just now at 0%, after the low battery warning. But then I had a revelation. In trying to calibrate the battery, I had set my energy saver settings to never sleep under the battery settings - so I could leave the notebook overnight to drain. I gave it a bit of a charge, then set the battery setting (in energy saver) to sleep after 20 minutes. I restarted, used the computer for a while, got the low battery warning, the computer went down to 0%, then went to sleep as it should.
I believe that since I had the computer set to "never" go to sleep, Leopard didn't know how to handle it when the battery ran down, and kernel panicked. Perhaps this happens on new MacBooks, because these settings aren't written yet? Regardless, it's obviously an OS level bug here.
For those having the problem, make sure your battery settings under energy saver are set to allow sleep after a time.

Start here:
_http://www.apple.com/feedback/macbook.html_
Joe

PDF export issue - ID CS4 update bug?

When exporting a book I have been using continuously over 1 year - both under CS3 and CS4 - suddenly the left master page items are not visible in the resulting PDF file.
These items are overlapping the spine on facing master pages, but this has never caused a problem before. Now, even after resizing these objects to the actual page size, they do not show in the PDF.
I found one workaround though. When exporting the pages with the document bleed, they are visible in the PDF even if the master page items are overlapping the spine in the bleed area. Afterwards I have to crop the resulting PDF by the bleed.
Is it a bug or is there a fix to this issue?

I've redrawn it all and placed in new images and now its starting to do weird stuff like make the images disappear as well as making part of the transparency 20% (as set by me) but then making another section of it 100%.(See below - top one is correct, bottom is incorrect). I would agree with you that it may just be an issue with the file, except its happening across multiple computers. There's not really any chance its a dud version of CS5 is there? Its all legit so no real reason why it wouldn't be.
Override Master Pages fixes it, but this is pretty disappointing if I need to have to do this every single time as it makes the master pages on half useful.
We do have CS3 actually and I opened it in that, exported it as a .inx but same issue with elements missing - the stroke around the outside disappeared.
Could it be anything to do with bringing across elements from Illustrator? Although the top element is appearing fine, and the bottom transparent element is a copied item so shouldn't be an issue. And the image disappearing - there's no real reason for that.

Fireworks CS4 Working VERY SLOW after 20 minutes of work on it.

Hi There,
I seem to have a slight problem with Adobe Fireworks CS4
speed. The program runs smooth until I use the program for about 30
- 40 minutes. Usually I have around 5 - 8 windows opened. I am a
NORMAL user, I use it for making simple graphics, web banners and
graphics alike. I don't know why it's running SO SLOW, it just
get's LAGGY, very LAGGY, then I have to reset the process. I just
save my stuff and rerun fireworks.
My Laptop's specs:
Asus Mv70vm
Windows Vista 32bit
4 GB Ram
Core 2 Duo T-9400
Only windows processes and anti virus is running.. (Computer
is completely clean from malware.)
Any help would be deeply appreciated!

From what I've read, I've come to the conclusion it's a bug in Fireworks. I'll have to post my comps specs when I'm back at work but it's a ridiculous 8 core machine with a crapload of ram. I've just figured that every hour or so I have to exit the app and restart it. What happens is that it just stops displaying anything and pops a 'Not enough memory" message on every mouse-click.
I love the app, just started using it about 6 months ago, but it's really not quite on par with the bulk of the CS4 suite.
Kind of strikes me as the toy Adobe bought and tinkers with every once in awhile.
I hope they improve it because I'm loving the potential...

FCP 7 with Share dont work when a Quickcluster is Active (Bug Found).

If you send your sequence with the option share of the new FCP 7 to create a Blu-Ray by example you will get an error who can be something like video file not found with your Quickcluster active.
Share give you the option to select your Quickcluster but that is not working at all guys.
Seem not important but think about creating a H.264 for Blu-Ray , it give you a very long wait ...
For me let get an example : Quickcluster 10 instances for a XDCAM EX of 12 Minutes take 25 Minutes , and for 12 instances it take 22 Minutes , no Quickclusters it take 30 Minutes.
On short project not important but long duration Blu-Ray well not very funny.
I am on a Dual Quad Cores 12 GB ram , i hope Apple will fix this for the benefit of all of us.
Message was edited by: Daniel Goyette

Sorry to report it is not working at all , allways the same message cant find the vido or audio file but in reality it work for the audio file but error occur at the video compression stage.
This is a bug since Apple suggest 1GB per core and i try as low as 4 instances , Without Share i can use with no problem at all 12 instances and it is realy fast and Share offer the selection of Quickclusters.
I short this Mac Pro cant use Share when any Quickcluster is in use as you see but i can use any Quickcluster when Share is not used to do Blu-Ray , so the important feature Share is Useless and since Apple promote it to do Blu-Ray one step we got a serious bug at the moment David.

INSANELY annoying CS4 timeline bug in Flash Presentation format

I've been using the Flash "presentation" format for three versions now, for doing very slide-like but animated training modules. Suddenly in CS4, there's a bug in the timeline where, no matter if the layer is locked or unlocked, frame 10 or 1000, an old file or a brand new CS4 file, the timeline scrubber JUMPS instantly back to frame 0 when you click any frame.
Can you imagine how frustrating it is to be working on a long animation, and you can't even navigate your timeline?? Please tell me there's some fix for this, I couldn't find one.
Screengrab attached. thanks

Hi Ned,
Thank you for verifying this and the suggestion...
The issue with adding the "blank frames" is the flash player slows to about 4 times slower to render out the new frame.
I have decided to place the code directly on the buttons, because I have found that sometimes a button's name will change as well and call on the wrong function....So this is very weird that I can dynamically change a buttons name hardcoded in! I cannot take the risk of the button firing off the wrong function as this could seriously injure someone. This program controls some big machinery.
The issue seems to stem pretty deep into the flash engine and effects all "Objects".
For example:
1. On Frame 1 name all of the objects
2. On Frame 2 rename all of the objects
3.On Frame 3 do not name the objects
On frame 1 gotoAndStop(3)
all of the buttons are named from frame 2 !!!!
So even though I have skipped frame 2 the unnamed objects pick up frame 2's names and label the unnamed objects.
So I would think the player would skip over frame 2...like a hard drive would indexing....but rather the flash player acts like a tape recorder having to seek to a position in the timeline.

Bug found - Restrictions Passcode

I believe that I have found a problematic bug with the Restrictions Passcode entry, but hopefully someone will convince me otherwise.
ISSUE:
I set up a Restrictions passcode on my young son's iPad Mini (1st Gen Wifi/AT&T/GPS 16GB, version 8.3). He clearly tried to guess the passcode, so when I wished to change the Restrictions, I saw the following on the Enter Passcode popup screen:
"Try again in 11,957,579 minutes / 6 Failed Passcode Attempts"
The minutes have been counting down, but it is still at 20+ years to input the passcode.
FAILED SOLUTION:
I plugged into iTunes, backed up onto my Mac and onto iCloud, restored the iPad to factory settings, and then restored the backup. This was in hopes that the 11M+ minutes would be wiped away to zero or something more reasonable. Still shows 11M+ minutes to wait.
DILEMMA:
He is begging me to save his app history (particularly Minecraft) before I wipe to factory and ask him to start from scratch.
QUESTION:
Has anyone encountered this Restrictions Passcode bug before? Any suggested solutions? Thanks!

Thanks JimHdk, but unfortunately these processes did not solve the problem. t would follow logic that the process you suggested - restoring the device to factory and then restoring the backup would work - but it doesnt in this case. I have executed all of the recommended processes for disabled devices (twice in fact) to the letter. Afterwards, the Restrictions passcode cannot be typed in at all and there are still 11 million minutes to wait (I know the passcode if it would let me type it in).
Not sure how it could be normal behavior to have to wait 20.9 years (11+ million minutes) before the device allows a Restrictions passcode to be typed in. There is no logic in the size of that number. Has to be a bug, right?

Photoshop CS4 Trial Bugs - Eraser & Text problems

Hows everybody doing...I recently downloaded the Photoshop CS4 Extended Trial and installed it on my computer...I am noticing some bugs and im not really sure if its just a bug in the trial version which will be fixed when i buy the program or if there was an error with the install...
I dont have screenshots at the moment since im not on the computer having the issue but i can get them if needed...
First lets start with the eraser tool...When i set the eraser tool as a size of say about 10px it works fine...However, if i zoom in on the image above its nautral size i start to lose the eraser...When i say lose the eraser i mean you can no longer seen the round area which will be erased..When you zoom in part of the circle disappears...It will still erase and area of the set size but its sort of hard to do erasing on detailed images when you cant see the whole eraser....
More bugs with the eraser....If i set the eraser to a larger size, say 30px or more, i right off the bat start seeing less of the eraser area....It will go from a whole circle down to something like a half moon with only half the circle being displayed...
This may be a little hard to understand so if need be i will get some screenshots of what im talking about later....
I am also having a problem with the text...For starters, i cant scroll through the text...When i enter text and highlight it and highlight the fonts i would expect to be able to scroll through the fonts while watching the actual text change on thet screen....I am unable to do that, i highlight the text and the fonts and CS4 will let me scroll maybe 4-5 fonts and then it just stops and wont scroll anymore...
Another issue im having with the font is the size....Whenever i enter text it is extremely small...Even if im working with a 200px x 200px image if i set my font at say 75px its tiny, tiny enough to where i cant even see it to highlight it....There appears to be something wrong with the sizing of the text...Just to get text to show up normally, at a readable size, i have to set the font size to 800px+ and this is on images which are only like 600px wide and 300px tall...Usually a font of 800px would fill up this image but when i do it the 800px font shows up like a 36px font...
Like i said if this is all to hard to understand i can get some screen shots later on...I wanna make sure this is something which can be fixed before i go ahead and drop 700+ on the program...

Yes i installed the patch...That was the first thing i did, before checking the video driver...The patch didnt fix any of the problems im having...The video driver update did however fix the eraser/brush issue...
I did what you said in post #1 about un-checking the option listed....When i did that nothing changed for me....
I have some more details about the scrolling issue though....From what i am able to find it seems that if i just enter digits i am able to scroll through the entire list of fonts and see a live preview of every single one....
With any sort of text it will only allow me to scroll through 5-6 fonts...You can see that it wants to scroll more when i hold the arrow down cause you can see the blue hightlight flashing and the words trying to change but it just wont go any further...At times when i hold the arrow down to scroll through the fonts it will scroll through 5-6 and then all of a sudden just go white and wont let me scroll up or not...At that point i have to select the font list and pick a font

FW CS4 Major Bugs I've Encountered So Far

*Had to edit because even the bullet tag doesn't even work.
C'MON ADOBE!*
Some of these have been covered already, but I just wanted to
start a definite list of things that make CS4 unusable and should
have been fixed in the beta before the final release.
New Text Engine:
• Crazy Selection Boxes - The text remains in it's set
place but the selection box that should be surrounding it is
located elsewhere on the page. Selecting the text does not move the
selection box back to the text, but rather the text to the
selection box, rendering precise formatting useless. Seems to be
triggered by using the arrow keys to move text, or shift+arrow keys
for faster 10px movement.
• Convert Text to Paths - Converting text to paths
outputs something unrecognizable, especially fonts under 12pt/px.
• Anti-aliasing - Text looks nothing like in-browser
text, even when fiddling around with the advanced anti-aliasing
settings.
• Auto Kern - Does nothing?
• Text Editor - Removed... but not?
New Vector Engine
• Combining Paths - produces graphic
anomalies/bleeding. Go "punch" a box into another. A 1px line is
formed when there shouldn't be anything at all.
Tabs
• Selecting Objects - When switching between tabs, a
double click is required to select an object when going from one
tab to another, even though said objects appears to be selected
before switching back.
• Exporting - When multiple tabs are open and I hit
Command + Shift + X to export, the document that is going to be
exported is not the document/tab I have currently selected/open.
Going into the open document and selecting an object within will
export it correctly.
• Tab Management - Not really a bug, but very annoying.
When the tab bar overflows with tabs, a small button appears at the
right to scroll through each tab. But you can't scroll, you have to
select the needed tab from a dropdown.
• Moving Between/Creating New Tabs - Tabs should act
more like safari in that objects should be able to be dragged to a
tab in the tab bar and the tab that is being hovered over should
open. Also, an object from within or from outside safari should be
able to be dragged to the tab bar to be opened into a new
document/tab.
Fireworks in General
• Closing - Most of the time, exiting Fireworks using
Cmd + Q results in a "crash report" window. Not sure why.
• Resizing Windows - Even without the Application
Frame, maximizing the window can be a pain. If the "properties"
toolbar isn't attached to the bottom of the screen, hitting the
green + button on the main document window will maximize the window
all the way to the bottom of the screen, behind the properties
toolbar. It's kinda annoying.
Text Engine - Convert text to paths sample:
http://timshundo.com/dpud/uploads/fwcrap.png
Text Engine - Crazy text boxes sample:
http://www.timshundo.com/dpud/uploads/ugh.png
Vector Engine - Combining paths sample:
http://www.timshundo.com/dpud/uploads/fwcs41.png
I think that's it for now. Any more I remember/find will be
posted here. Dearest Adobe, I'm severely disappointed with this
release and expect a (free) update that fixes it all.

That works, but it's really just a quick fix. I find myself
selecting all of the objects on the page before I save and switch
them over to the cs3 engine. That has to mean something to you
guys.
In all, the new engine just isn't very good. Things appear
bolder than before. All that was wrong with the old engine is that
you would occasionally get 1 or 2 little rogue pixels when you drew
paths with tight corners around 1 or 2°.
quote:
Originally posted by:
ArunKaza
Hi Tim,
The visibility of 1px lines sometimes on punching 2 vectors
is because of the differences in the vector rendering engines used
in FWCS3 and FWCS4.
While the vector rendering engine in CS4 was improved to be
more faster and produce smoother antialiased vectors, subtle
differences do exist between these engines.
The good news is that you can use the older engine
selectively on a vector if you wish to, using the command
Use_FWCS3_Vector_Rendering_For_Selection. This marks the selected
vector to switch to using the older rendering engine.
Any vector brought into CS4 which was created in CS3 or
earlier version of Fireworks, would still continue to use the older
vector rendering engine to give the exact pixels. These can also be
forced to use newer vector engine by using the script command
Use_FWCS4_Vector_Rendering_For_Selection.
Since these commands act on the selected objects, please be
sure to select only those that need to be effected.
For ease, I have attached these 2 command .jsf files that can
be placed at below mentioned locations and used to switch b/w FWCS3
and FWCS4 rendering.
Windows: "[C:]\Program Files\Adobe\Adobe Fireworks
CS4\Configuration\Commands\"
Mac: "/Applications/Adobe Fireworks
CS4/Configuration/Commands/"
--Arun
quote:
Originally posted by:
Tim Shundo
New Vector Engine
• Combining Paths - produces graphic
anomalies/bleeding. Go "punch" a box into another. A 1px line is
formed when there shouldn't be anything at all.
Use_FWCS3_Vector_Rendering_For_Selection
Use_FWCS4_Vector_Rendering_For_Selection

Possible bug found in Mac Os X Tiger 10.4.11 in conjuction with iPod Touch

Dears,
I think I've found a possible bug in Mac Os X version 10.4.11 in conjunction with iPod Touch.
When the iPod is connected during boot, my Bluetooth hardware fails to be detected. When I restart the portable without the iPod connected, my Bluetooth hardware is recognised & activated again. It is reproduceable.
1. Attach iPod Touch before starting the MacBook Pro
2. Boot the Macbook
3. Bluetooth hardware should be rendered inoperative
Restore functionality:
1. Detach the iPod Touch
2. Reboot the portable
3. Bluetooth hardware is restarted / recognised.
Regards
Cedric

wrong category

Css Tabs in Dreamweaver CS4 Workspace bug?/annoyance

Css Tabs in Dreamweaver CS4 Workspace. This is probably more
of an
annoyance than a bug.
When working with CSS, I use multiple CSS files and when I
make a change
to one, I hit save (CTRL S)but it doesn't save the CSS file I
was just
working on. In order to make it save that CSS file, I have to
click on
one of the others and then back to the one I was just working
on and
then hit save.
Kind of annoying, right?
I demand this to be fixed! ;)

Art,
I guess you didn't understand what I meant by "focus". Let me
try to
explain in terms of your recipe -- all you need is a slight
change in
workflow:
> 1. Open page with multiple style sheets applied
> 2. Have split screen
> 3. click on one style sheet and edit it anywhere. After
editing, the
> rounded box will be black and have an asterisk applied
At this point, the style sheet has "focus", so click Ctrl+S
now, before
you click back in Design View (which changes the "focus" back
to the
main document).
FYI, if you're clicking in Design View to update the
rendering, you can
hit F5 to update the main document rendering without giving
it "focus".
> 4. Click back to page in design view.
> 5. Click control save. It doesn't save the style sheet
that is
> highlighted and has an asterisk.
> 6. In order to save you must "save all" or click off
and then on
> to the style sheet.
Hope this helps,
Randy
Art wrote:
> Let me restate the problem so it's clear what is
happening.
>
> 1. Open page with multiple style sheets applied
> 2. Have split screen
> 3. click on one style sheet and edit it anywhere. After
editing, the
> rounded box will be black and have an asterisk applied
> 4. Click back to page in design view.
> 5. Click control save. It doesn't save the style sheet
that is
> highlighted and has an asterisk.
> 6. In order to save you must "save all" or click off and
then on to the
> style sheet.
>
> Perhaps this is more an issue of focus rather than a
function of the
> save command.
>
> Since it's not saving, perhaps Dreamweaver shouldn't be
displaying the
> black rounded box as it is no longer selected when you
click back into
> Design view.
>
> Of course there are ways around this; it's just a little
annoying that
> it's displaying "active" yet it's not.

IOS 5.1 Bug Found!

Just updated to ios 5.1 on an iPhone 3GS and found a bug, when removing apps from folders, the second to the last app removed will crash the springboard, and respring... why!? im not sure why but is it comon for iphones to respring? even when they are not jailbroken? ive done a clean restore from ios 5.0.1 to ios 5.1 there should be nothing there to cause a springboard restart.. right? or is this a way of the iphone protecting itself? (like safe mode for example) but thats not fair for me, what of i was in the middle of a serious situation and my iPhone crashes into a respring? im trying to record a number, or a note, or even make a phone call, will i have an issue with resprings all the time or is this a once in a lifetime thing? im actually concerned. tho absolutlly thankfull for the battery fix, it has proved its self worthy. please let me know what you think, will apple release a fix for the crash?

Hi there,
I can't seem to recreate this issue myself, but please report it to Apple here: apple.com/feedback, they are always on the lookout for bugs which they can fix.
Remember to include a detailed description of the error, including a step by step process on how to recreate.
If you have any other questions, do ask, if not, have a great day,
Nathan

DW CS4 - 2 BUGS Found in 10 minutes

Similar Messages

Maybe you are looking for