DW CS4 doesn't display updated images edited in PS

Old way with DW8:
I would change/update an image in PhotoShop – save
over the old image – and DW would automatically
display the new version.
New way (DW CS4):
I do the same as above, and DW does NOT automatically display
the new image. I’ve tried hitting F5 (refresh) in the Files
column, which oddly, works once in awhile – but not usually.
I’ve tried closing out the page and re-opeing and that
doesn’t work. And I’ve tried re-inserting the image; no
luck. Stranger still – if I upload the new image to the
server, the new image will show up in a live view of the page
– yet DW continues to display the old image.
I’m on a PC, running Windows XP (SP3)
Any help would be appreciated…
DB

DaveB444 posted in macromedia.dreamweaver
>
New way (DW CS4):
> I do the same as above, and DW does NOT automatically
display the
> new image.
> I?ve tried hitting F5 (refresh) in the Files column,
which oddly,
> works once in awhile ? but not usually. I?ve tried
closing out the
> page and re-opeing and that doesn?t work.
Just a long shot since I don't have CS4.
Does it help to rebuild the site cache? In CS3 it's
Site->Advanced->Recreate Site Cache
Mark A. Boyd
Keep-On-Learnin' :)

Similar Messages

Index page CS4 doesn't display properly for google chrome users

index page CS4/ Dreamweaver doesn't display properly for google chrome users, shows as a blue page / version of Chrome is 17.0.963.56 m. version of flash is 11.1.102.62. Operating system is Version 6.1 (Build 7601, Service Pack 1). Javascript version 1.7. Quicktime is not installed.

www.pianofortemusicschool.com

Preview doesn't display bmp image

Using Bootcamp, I saved a BMP image file of a windows screenshot. I can view the screenshot with Tiger & Preview properly, but when I open the file with Leopard & Preview, the entire image is blank except for the windows image resize buttons in the top right corner.
Using Leopard and Quicktime, I can view the image. Also I can display the image properly using Microsoft Word on Leopard. I cannot see the image when I insert it into Pages on Leopard.
Why is the BMP file viewable with only certain applications? Does Preview, under Leopard, no longer support BMP files?

I tried using the link you provided to report the problem to Apple, but it wouldn't log me in. Do you have to be a developer to use Bug Report? If so, perhaps a developer could confirm this as a problem, and report it.
I posted the offending BMP file to my iDisk account: http://idisk.mac.com/rush1-Public
Problem: On a Leopard system the BMP is not displayed properly using Preview or Pages, but it is viewable using QuickTime or MSWord.

Mail 5.2 doesn't display embedded images

Mail 5.2 (OS 10.7.4) no longer displays embedded images. This happened after I installed an AirportExtreme wireless router. I can send images as attachments, but received mail with images displays blue box with ?. Using "download image" has no effect. Mail/preferences/ has " Display remote images in HTML messages" checked. The answers to similar questions don't seem to apply, or I just don't understand them. Can anyone advise me?

johngar wrote:
I have tried forwarding the incoming message from my iPhone, which does display the images correcty, and from another account on my desktop. In both cases the thumbnails contain only "?" and "download image" does not work.
Ignoring the forwarded message from the iphone, is the message you forwarded from another account also a message that was originated on your iphone?
The mail program on the iPhone, which is supposedly the same as the mail program on my desktop, displays the thumbnails correctly and they expand to give the full size image. I take this to mean that the fault is not with the source of the images. I don't know how to imbed images, as opposed to attachments, in my e-mail, so I can't produce my own example.
What makes you think the mac mail program and the iphone mail program are the same program? I don't think that.
The reason I wanted you to send a message to yourself on your mac using the mac mail was I wanted to get the iphone out of the equation. If you cannot embed images in the mail message that is because all image, etc. are handled as enlosures due to the way the mail protocol works. Perhaps that is why messages from the iphone appear the way you are seeing them, i.e, there's no way to embed an image and the iphone mail is not converting it to an enclosure.
If you are going to test from an iphone try sending the image as an enclosure and see if mail can handle that.

Bridge won't update and doesn't display raw images from my Sony cameras.

Using new Win8.1 laptop that recently have displayed Sony Raw images.Using PS CS6 stand alone which does nothing when asked to update. Adobe asked for ID verification which I did but didn't help.

Camera Raw version 7.x only works with CS6.
You need Camera Raw 7.3 (CS6) or DNG Converter 7.3 or Lightroom 4.3 to open your 6D raw files, because it did not exist before these versions. Camera Raw updates are not usually provided for old versions of Adobe software.
Propriety raw format support can only be added after a new camera's release, unless manufacturers broadly adopt the DNG format as an alternative. Fortunately, DNG Converter is free, and you can use this to create DNG files from your Canon's raw files, to be opened in any version of CS/Lr.
http://blogs.adobe.com/lightroomjournal/2012/12/camera-raw-7-3-and-dng-converter-7-3-now-a vailable.html

How to best display/update images in gallery??

I'm designing a site for my photography but I'm stuck. I'm new to this and trying to learn, so I'll try to explain clearly. Usually I have problems with things that sound like they should be really simple but end up with unbelievably complex answers, so please keep my beginner status in mind with responses (the complexity itself isn't an issue since i'm sure i could learn whatever needs to be done, just that nothing is more frustrating than an answer of pure code and no plain-english explanation of what is going on).
the overall design is simple enough: thumbnails to the right (in their own iframe so links can navigate several columns of thumbs, though i'm sure there's a better way to do this, too), large images to be displayed nearish to the center, and some other stuff to the left unrelated to this issue. If all the images were oriented the same way (all landscape or all portrait) i'd have no trouble just creating a frame/iframe of the correct size and call it good enough, but i have about half landscape and half portrait. I considered a square iframe, but then i'd have to create a new html file for every single image (to make the image centered and make the background transparent so i don't get white bits). Is there a way I can do this where i could link just the jpgs to something (centered within a frame, div, whatever) with transparency enabled and save myself the pain of creating dozens of individual html files?
I've researched a few ideas I had: It doesn't appear to be possible to link directly to a large square div. It also doesn't seem possible to format/style an iframe to meet those requirements without the individual html pages. I've wondered if it would be possible to create two overlapping iframes (one for landscape, one for portrait) and have the link specify which one should show, but i've found nothing helpful on this issue (not even enough to know if it's possible in this context). i even considered throwing out dreamweaver completely and doing a flash-based site, but i was told that this was too hard for a beginner and to not even try (always love a vote of confidence). If I am told the same thing here I may consider scrapping the project entirely because i'm fast running out of options (and i just won't create individual html pages for dozens and dozens of images, it's not worth that kind of tediousness). And this should be obvious, but because a friend suggested it someone else might: no, my work cannot be cropped so they're all the same dimensions and i'd prefer to not modify the images in photoshop to create borders that make them all square (on a slow connection it looks really strange if the image and the "background" load together).
I hope i gave enough info/details.

Instead of creating x-number of html pages, just have your menu page dynamically write the html page to the main viewing frame. If you have different layouts you can have javascript code make decisions based on information you pass to the writing functions from the menu selections. What you'll want to do is learn how to use the document.write() javascript functionality. You would build a variable that contains the html code for the page and then use the document.write() function to write that code into the frame.
As a simplified example, you could have a javascript function in the menu page that you pass the image name to and write that as a page to the "main" frame...
function createImagePage(imageFilename){
    // create the page code
     var mainCode += "<html><head><title>An Image Page</title></head><body><img src=\"";
     mainCode += imageFilename;
     mainCode += "\"></body></html>";
     // write the page code to the main viewing frame
     parent.main.document.open();
     parent.main.document.write(mainCode);
     parent.main.document.close();
While I didn't show it, if you have two different page styles to create, then along with the filename you could pass a style number to the function to have the javascript decide which format to code.
Sorry if that little bit of code is over your head, but you'll have to learn the languages involved in web pages if you want to create them. Using document.write() is one of the first things you are likely to learn in a javascript course.

Premiere CC doesn't display/update windows sometimes in Windows 8

Just recently, with Windows 8 and Premiere CC, I get a bug that makes Premiere unusable. Certain windows don't draw or update regularly. See attached screenshot (https://dl.dropboxusercontent.com/u/651378/premiere%20windows%20not%20showing.PNG). Notice how I don't even have a timeline windows showing. Once I select the 'Media Browser' tab in the top left window, my timeline magically appears.
While editing in the timeline, changes don't show, making it very hard to edit. The timeline window only gets updated periodically.
Even rebooting does not correct this. It doesn't always happen, but when it does, I can't correct it. This happens with no other application.

Now to expand on my question (was running out of the door earlier, so it was curt).
I am the guy who experienced similar issues on Windows 7 and then after clean install of Windows 8.1 the issues went away. Yesterday, however, I had to open an existing project that required cineform codec to be installed so I went ahead and reinstalled and reactivated Cinefrom Studio Premium (2.0.0.285).
Did not have any issues with it yesterday. Today, on the other hand (and after a computer restart) I made a new project for something else I am working on which doesn't even contain any cineform footage, and then I had to go to the effect panel when I saw the dredded Search Field Hole.
Sure enough, all of the bad behaviors came back - an inability to untwhirl effect controls and wierd CTI behavior. Will try to uninstall Cinefrom later tonight to see if that was an issue.
On the side note Cineform has really dropped the ball lately. Pretty much unusable as a professional codec: timecode issues (non standard behavior), 23.9762 interpreted as 23.9800 etc.

Loupe in Bridge doesn't display DNG images created using DNG Converter correctly. Why?

I have noticed recently an anomaly in Bridge when viewing DNG files that are created by converting my Nikon NEF files to DNG using the DNG converter. Specifically, when clicking on the preview image of a DNG file, in order to open the loupe, the 100% image seen in the loupe remain fuzzy, whereas when clicking on a preview of the original NEF file the 100% view in the loupe is sharp and clear.
I am using DNG Converter version 4.6.0.3, and it also occurs when using version 4.4.1. I am using Bridge version 2.1.1.9.
I have no reason to believe that Bridge is at fault, since the loupe function does work properly when viewing the NEF file. It would seem that there's a problem in the DNG conversion.
However, despite this anomaly seen in Bridge, when I open the DNG file in Camera Raw, it is perfectly normal at 100% or any magnification.
I have tried re-setting the JPEG review size in the DNG converter, but that makes no difference.
What's going on here? I don't want to keep both the NEF and DNG versions, for reasons of space, but I'd like the loupe to work correctly. Help, please?

Try to recreate the thumbnails for that folder.
Use the latest version of the converter (5.4)

Bridge CS4 doesn't display PNG thumbnails?

I just did a reformat, and this time round my bridge isn't displaying .png thumbnails. Have emptied caches and reset preferences to no avail. Help? Thanks

I just did a reformat, and this time round my bridge isn't displaying .png thumbnails.
Could you be a bit more specific about what OS system you are using, what your exact version of Bridge is and what you mean with doing a reformat, does that mean a whole new system on a completely new formatted disk (and what type of formatting did you use for that) etc.
And did you already try to select a PNG file and use right mouse click to purge cache for selection.
Does the PNG icon appear or is it a white thumb?
Questions, all questions...

Photoshop CS4 doesn't display anything

I recently bought an Nvidia GTX260 graphics card hoping it would boost performance also in Photoshop. After installing the latest driver directly from the Nvidia website, I still have this problem: when I open a project, there is no error but nothing is displayed in the drawing area (so no canvas and no layers). The application works fine if I turn off OpenGL drawing. However I was hoping to use this feature to improve performance.
I tried:
1. Reinstalling the driver. Also I tried switching the openGL drawing option off before reinstalling and then switching it on after installation.
2. Enabling and disabling each advanced option I have to see if a particular one causes the problem.
I also mention I reinstalled windows and all my software and still does not work.
I was using NVidia 7300 graphics card before and experienced no difficulties.
I'm running Windows Vista x64 on a intel q6600 platform with 4GB RAM.
If you know of any solution to this problem please help.

Thanks dec9. I did as you suggested.
This is becoming really weird.
So here is what I did:
I download and install DriverSweeper (latest version). It (surprisingly) erases all the Nvidia dlls and files so when I reboot, I have to reinstall Nvidia drivers for my graphics card. I install them and reboot. I open Photoshop and switch on OpenGL drawing and (although I did not expect it) it worked. I could see the canvas with the drop-shadow effect. I also mention here that when I switched on the OpenGL drawing feature, my graphics card name was not displayed in that rectangle above Advanced Options (usually it says what graphics card Photoshop detected).
So far so good.
I then exit photshop and restart my computer again. I get the same problem. It does not display anything. I tried a couple of times (also enabling and disabling OpenGL) and still nothing.
What is also "funny" is that if I move the layers on the canvas, the changes are reflected in the thumbnail of the layer in the Layers dock. And while I drag the window containing the project, I can see my work on the canvas. It is when I complete the drag operation that the canvas dissapears again.
It's definitely a driver thing.
Thanks for your help.

What can I do if my ipod fell and separated the screen from the things inside? i can separate them completley and see the inside of my ipod. It still works, it just doesn't display any image or whatsoever

Please help me! I just want to know what can i do to make it work again, do I have to take it to an Apple store or something? btw i bought it like two years ago, so my guarantee is not valid anymore.

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
fix it yourself
iPod Touch Repair – iFixit

Problems displaying an image on Adobe Reader 8.1.2

Hi guys,
We are trying to display a JPG image in an InteractiveForm. So, we set an Image (StaticImage) to be loaded using the following Formcalc script on Page Initialize event:
StaticImage1.value.image.href = $record.ImageURL
On our last project, we could display a JPG image with Adobe Reader 6 (with some alert messages), 7 and 8 (7 and 8 fully functional). But in this one, the same solution doesn't work. The unique difference between both solutions is the URL format. Last project displays an image based on a normal URL ("http://app.client.com/photo/1234.jpg"), and in the current project we create a PNG or JPG image based on a JFreeChart, generating an URL to access it ("http://server1:54321/webdynpro/resources/vendor.com/..(long)../graph43211234.jpg").
When we load it using a computer with Adobe Reader 7.0.x installed, the bellow message is displayed requesting an action:
"Acrobat is attempting to connect to the site:
http://server1:54321/webdynpro/resources/vendor.com/..(long)../graph43211234.jpg
If you trust the site click "Allow", otherwise click "Block".
Possible actions: Block, Allow and a check "Remember my action for the site: server1"
Allowing the connection, the images are displayed. But, in a machine with Adobe Reader 8.1.2 installed, sometimes it asks for permission to access the URL, sometimes not. And, in both cases, in this version it doesn't display the images...
Can anyone shed any light on this? Also, is there a way to block this annoying message?
Regards,
Douglas Frankenberger
P.S.:
1 - The Image is not marked as Embedded. This option don't seems to make any difference, as on our last project the StaticImage was not flaged as Embed, but the JPG file was embeded in the PDF anyway...
2 - Interactive Form display type: native. Mode: updateDataInPDF
3 - In current project, when we set the same image the we had set on the old project, it loads successfully. Also, the generated JFreeChart image is fully accessible when displayed directly in IE using its URL.
4 - Versions:
- Client: Windows XP Professional
- NWDS 7.0.10
- Adobe Livecycle 7.0.50519.0
- Adobe Reader: 7.0.8, 7.0.9 and 8.1.2

Hi Amita.
We already tried it (checked / unchecked), but it seems to make no difference. There is a strange behavion on this:
- When I set it checked, on a computer disconnected from the web and running Adobe Reader 7.0.9, it asks for permission to access a resource (as I said before). In this case, even disconnected, it shows up my image independent of allowing/blocking the access to the external resource. In other words, it is embedded (I think...), but continues asking for access anyway.
- The same scenery above, but using Adobe Reader 8.1.2 instead of 7.0.9.... sometimes it asks for permission, sometimes not. But in both cases, it doesn't display the images...
Regards,
Douglas Frankenberger

Display a Image

I am using this code
<img src="#IMAGE_PREFIX#LOGO.jpg">
in order to display in a HTML region a previous loaded image but it doesn't display the image? Something is wrong?
Thanks in advance.
Jairo

Hi jairohernan ,
use WORKSPACE_IMAGES or APP_IMAGES instead of IMAGE_PREFIX
<img src ="#WORKSPACE_IMAGES#LOGO.jpg" />
Note : Give More Details to get quick solution.
Regards,
Jitendra

Column View won't display some images downloaded by browser

I have used the "Preview" in Column View to display images for some time and some images downloaded to folders will never display. The wheel just spins in the display area and CMD-i doesn't display the image either. If I open the image in the Preview application it displays! There is no detectable difference in the files that do and don't display in Col. View. I can get any image to show up by opening a graphic application and doing a "Save As" to reprocess the image and replace the balky one. But, this is not right that I should have to do this. I cannot determine whether a downloded image is going to have a problem or not as some from the same websites are OK sometimes and some are not. I had the problem with OS 10.2.8 too. Changing from iCab to Safari does not help.

ACK!!!! Cancel all that because it happens using Firefox too. I have NO IDEA what in the world is happening to my system that would cause web pages to load incompletely.
What a drag.

"File Link" - Images - displaying landscape image as portrait image

I am trying to link a image by using file link button. I have a image of size, width 10' and height 6'. When i link this image in reports, it doesn't come up in these coordinates. It is displaying as 6x6 size image. I have tried to link other images also. Report doesn't display linked images in their actual size, even if i change the size of rectangle in reports for these linked files.
Any idea how to fix this in report?
Thanks

I have figured it out. In paper layout mode it doesn't display right size. But in paper design mode it is showing full image.

DW CS4 doesn't display updated images edited in PS

Similar Messages

Maybe you are looking for