DW CS5.5 Keyboard Layout BUG?! Help pls

When I startup DW, and switch keyboard layout in CODE VIEW from eng to rus or from rus to eng all ok, window focus stay on CODE VIEW and I may write code perfectly, but after uses some any Snippet or simply open Snippet panel (SHIFT+F9) and then close .. I have big trouble, now when I switch keyboard layout I lose focus from CODE VIEW every time! and i must click left mouse button on code writing area to continue writing.. it very not comfortable.
U can try make this steps:
1. Run DW
2. press SHIFT + F9
3. Try to write some CODE
4. Now I press CTRL+SHIFT (keyboard switch) and lose MyFocus.. every time
I think u understand my trouble, PLS tell what i can do to resolve this.
sor for bad eng.

Perhaps I'm not following your logic. But why must you work with remote images?
Let's say your products page is uploaded to https://yourDomain.com/
and your local images are in an images folder that uploads to https://yourDomain.com/images/
Given that workflow, everything will be on the secure server so there is no reason to use remotely hosted images during development.
Nancy O.

Similar Messages

Keyboard Layout, Bug? Bad Config?

Hey, love arch, love the support, love kittens.
after reading through the wiki and setting up arch i ran into a problem.
it seems my keyboard keeps reverting to the us layout.
here is my 10-keymap.fdi, it's placed in hal\policy.
<?xml version="1.0" encoding="ISO-8859-1"?> 
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>

<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">gb</merge>
<merge key="input.xkb.variant" type="string" />
</match>
</device>
</deviceinfo>
i have tried both gb and uk. no luck.
when it didn't work i decided to specify it in my rc.conf.
LOCALE="en_US.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
that worked for a while, an hour or two, then changed. i am using kdemod. 4.xx, my system is fully up to date.
Thanks.

got it working,
setxkbmap gb
curteous of your irc channel. thanks guys.

Xorg bug: max number of possible keyboard layouts

Dear forum,
yesterday I installed Archlinux for the very first time on my home notebook. It was the first time for me that I saw KDE 4 running, too. After short time I encountered my first problem with that.
It seems to be a bug in the Xorg protocol that limits the total of keyboard layouts to 4 (four). This, however, used to be circumvented in KDE until version 3.5.10 to allow more layouts, but after they removed their hack (and with it the functionality) it's been reported several times as a bug. The issue was even introduced to KDE4 as a feature by the kxkb maintainer so I don't expect any progress from this side soon.
So KDE4 was rendered basically useless for me as I need at least 6 different layouts. I came here to the forums for help because I don't know yet (after one day) what would be the "arch way" of eliminating this so-called feature without breaking my package dependencies. Two possibilities came in my mind:
1 Downgrade kxkb or whatever causes the problem to the last usable version.
2 Downgrade KDE to the last usable version (that would be 3.5.10).
Third possibility, as I'd like to use the machine for work, would be to install another distro that provides solution no 2. I hesitate to do this because I picked arch for some reason and would like to become familiar with it.
Any help would be much appreciated; thanks in advance!
Philipp
EDIT: I thought of a fourth solution that could be any other WM or DE that doesn't restrict itself to Xorg's limits.
Last edited by parthenopaios (2009-06-30 16:08:51)

Hi there,
Well if you need high customizability, check out FVWM (I'm using that), *box or awesome. These three are really for powerusers and thus their configuration may be more difficult, but you can do more with them...
In FVWM you can call any scripts you want via keystrokes (I believe in other mentioned WMs it is possible too). My Keboard Layout switching script is really lightwheight and it can store as many keyboard layouts as you want (at least it will cope with your 6 with no difficulties). It may work even in KDE, but you should then create a key binding.
Search in this forum for xkbswitch. There was a discussion before about it.
Ignas

Bug report: A keyboard layout is incorrect on the remote with Japanese keyboard

This is a bug report for Microst Remote Desktop
===================================================
## Summary
A keyboard layout is incorrect on the remote with Japanese keyboard
## Version Information, I tested
* Client
   * Case 1
       * MacBook Pro with JIS106 Keyboard
       * Mac OS X Lion 10.7.5
       * Microsoft Remote Desktop 8.0.24308
   * Case 2
       * MacBook Pro with JIS106 Keyboard
       * Mac OS X Mavericks 10.9.1
       * Microsoft Remote Desktop 8.0.24308
* Remote
   * Case 1
       * Windows 7 Professional Japanese
   * Case 2
       * Windows Server 2008R2 Datacenter Japanese
   * Case 3
       * Windows Server 2012R2 Datacenter Japanese
## Detail of bug
When login from Mac OS X with Microsoft Remote Desktop, the keyboard layout is always incorrect on the remote.
The client machine have a built-in keyboard of JIS 106 layout,
and the primary language is set to Japanese.
But on the remote, the keyboard layout is US 101.
So a input of Shift+2 does not result " but @.
I've seen the above behavior on the 3 remote enviornments described the above.
This bug did not occcur with Microsoft Remote Desktop Connection Client for Mac 2.1.1, even if the system language is English and keyboard layout is Japanese.
## Captures
I've took some of screen captures.
I'm sorry for the capture includes Japanese words, so I added description in English.
Capture 1:
Mac OS X Keyboard Setting
Capture 2:
Windows Server 2012R2 Screen Keyboard
Capture 3:
Windows Server 2012R2 Screen Keyboard, with a additional registry key configured.

This bug also affects the Canadian English settings. If the client is set to Canadian English with a US keyboard the remote server is setup using a Canadian French keyboard. Using the language selection in the toolbar you can temporarily correct
the problem but the keyboard resets to french at the most inopportune times. The was a problem in the earlier RDP client and was fixed so it's sad to see it reoccur in the new client.
Lawrence

Bug report: A keyboard layout is incorrect on the remote with Hungarian and other "exotic" keyboard layouts

This is a bug report for Microst Remote Desktop
===================================================
## Summary
A keyboard layout is incorrect on the remote with Hungarian keyboard
## Version Information, I tested
* Client
   * Case 1
       * MacBook Pro with HU101 Keyboard
* Locale: Hungarian
       * Mac OS X Maverics 10.9.2
       * Microsoft Remote Desktop 8.0.6
* Remote
   * Case 1
       * Windows Server 2003 R2 (English)
   * Case 2
       * Windows Server 2008 R2 (English)
   * Case 3
       * Windows 8.1 (Hungarian)
## Detail of bug
When I connect to the listed remotes the client sets the keyboard layout to Latvian which is a completely different layout than Hungarian (not even close...).
- On Windows 8 if I set the language on the login screen it stays on that language after the login.
- On Windows Server 2003R2 and 2008R2 even if I set the language at login it will switch back to LV after the login.
## Attachments
Unfortunately cannot include my shots because I'm not allowed to do this...
## End of report
Please allow the users to set the correct "target" language on connection basis because the automatic method the app use to determine that is unreliable.

Hi,
Thanks for the feedback.
I will forward this to the product team.
Thanks.
Jeremy Wu
TechNet Community Support

"Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

"Adobe Illustrator cs5 quit unexpectedly" error message.
After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
Help pls.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M.

Need help after install lxde fresh (keyboard layout, policykit, ...)

i cant mount mz other ext hard disk i get this
org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result)
i tried to search forums and do some things but none helped
altought i selected croat as a keyboard layout during install, and it worked in lxde first time i loged in, now it doesnt work
ati propriety driver 9.3 altought it is old now supports new kernel and Xorg but i dont know how to install it, aur has missing file and if you just run from package from ati it gives unsupported os error

For the graphical keymap, try setting it manually like this:
setxkbmap <LANG> -print | xkbcomp - $DISPLAY
Substitute <LANG> for the croatian language code (for instance, you would use "us" for an american keymap, or "no" for a norwegian one. I don't know the croatian one.)

Hello everyone, i need Mongolian keyboard layout, how can i find it, please help me, my pc is version OS X Yosemite, 10.10.2

hello everyone, i need Mongolian keyboard layout, how can i find it, please help me, my pc is version OS X Yosemite, 10.10.2

CLICKY CLICK---> Multilingual Mac

Digital Cinema Desktop Preview, keyboard layout and other bugs - Leopard

I just reinstalled my Mac Pro because I hoped it would fix some bugs... but no luck. Digital cinema desktop preview (dcdp) was working just fine until I installed the Aja Kona Lhe software, afterwards only dcdp for the main display was working, both dcdp and dcdp "full screen" have disappeared. The other things I was hoping 10.5.2 would fix are the problem FCP cannot remember the keyboard layout I use (azerty-belgium) - every time I start the program I have to choose the layout again - and the fact I cannot export using compressor straight from FCP using qmaster: Final cut pro generated an error! (this has never worked)
If you are having the same problems as I do, maybe we should compare hardware to see what we have in common that could be causing this problem. As I have found during my searches, some computers have similar problems, others don't, sometimes it also matters if you've upgraded from Tiger of did a clean install, where upgrading it seems (yes really!!) gives the least problems...
I really hope there will be a bugfix soon, because I'm sure I'm not the only one having these problems... or maybe I should just install Tiger and upgrade...???

I vote for going back to Tiger. That is known to be stable. Leopard and FCP is unpredictable at the moment.
Shane

Keyboard layout.. HELP...

how can i create a keyboard layout on my own for an iPhone??? please need help....... help... how to assign characters to each UIButton??

If you don't have any Time Machine backups you may may have to build another layout. You could maybe find a template that is similar to what you're using and import it. Other than that, it's fairly easy to set up screen controls.
In edit mode, click on the screen control area and select the desired smart controls layout in the screen control inspector. Then click on a screen controller(i.e. drawbar) and select assign and map. Move the physical slider on your controller keyboard. It's mapped. Then repeat until all controllers are mapped. Next time, back up your files.

Photoshop CS5 Keyboard layout

Hello, this sound strange to me and I want to investigate... I was adding some text to a jpeg image, I start writing and the keyboard layout changed to US, I am from Italy so I have the IT layout. I don't know if there is a shortcut in photoshop that I triggered or if it happen for some other reason. Every other program mantained the IT layout, and I don't have the US layout selectable on the Windows (XP SP3) side bar. Any hint?

Go to Control Panel->Regional and Language Options->Languages->Details->Key Settings and change the keyboard shortcuts from there.

Help: keyboard layout mismatch

My keyboard layout corresponds to the keyboard in Keyboard Viewer, except of one key which is right underneath the Escape key (left to the 1 and above the Tab key). When I press it, it gives a § and with Shift a ±
The Keyboard Viewer suggests that this is the key to get a ` in combination with Alt. but it doesn't.
I tried different keyboard layout settings, but the one I am using right now matches best.
Any idea how to get that ` without having to use the Keyboard Viewer or Character Palette all the time?

Hmmm… I never even considered you would have this problem with an in-built keyboard. I tried every single key layout and none of them has a `/~ key where the §/± key is (right below the esc key).
Are these the only keys that are out of place for you in that they are swapped around? If so then you might just want to consider removing each key and physically swapping them around yourself. The keys caps of your keyboard are removable.
Another, probably a more sensible first, option is to go to the store where you bought your PowerBook and ask them to sort it out. Even if you bought it from the Apple Store find a certified service centre where you can go and ask them at least.
I'm rather confused as to your key assignments. By the way, what language keyboard did you buy?

[Solved] Can't login with current keyboard layout and `@` in password

Hi, I'm a new arch user. I followed archwiki to install Enlightenment17. All went fine but I have a problem to login since during setup I inserted '@' in root/regular user passwords. During setup I selected the Italian layout and all seems ok, except grafical login through entrance (from aur, but I tested also kdm, with same results): password not recognized. Before asking, is not a CAPS/NUMLOCK issue since the password works using it in console login. I discovered that I can type '@' with the following combination: SHIFT+2; in an italian keybord this should print a double quote (") but in entrance (and kdm) it correponds to '@'. After login this way, the keyboard works normally (for instance using 'su'). So the problem is limited to graphical login (entrance and kdm) during which a different keyboard layout is used.
Did I miss some config file?
For the sake of clarity:
1) /etc/locale.gen has "it_IT.UTF-8 UTF-8" uncommented
2) /etc/locale.conf contains "LANG=it_IT.UTF-8"
3) /etc/vconsole.conf contains "KEYMAP=it"
4)
$ locale
LANG=it_IT.UTF-8
LC_CTYPE="it_IT.UTF-8"
LC_NUMERIC="it_IT.UTF-8"
LC_TIME="it_IT.UTF-8"
LC_COLLATE="it_IT.UTF-8"
LC_MONETARY="it_IT.UTF-8"
LC_MESSAGES="it_IT.UTF-8"
LC_PAPER="it_IT.UTF-8"
LC_NAME="it_IT.UTF-8"
LC_ADDRESS="it_IT.UTF-8"
LC_TELEPHONE="it_IT.UTF-8"
LC_MEASUREMENT="it_IT.UTF-8"
LC_IDENTIFICATION="it_IT.UTF-8"
LC_ALL=
Thanks for any help.
Last edited by bull3t (2013-03-03 14:10:15)

cfr wrote:Have you tried specifying a variant?
I exclude a variant problem considering that in any other condition the keyboard layout is right. The system is configured for an it KEYMAP but it is obvious that in entrance/kdm is used an 'us' map. Is this hardcoded somewhere? I also tryed to comment out any entry in /etc/locale.gen except 'it_IT.UTF-8 UTF-8': still 'us' keymap in graphical login screen.
Probably a kind user with a non-us keyborad layout could create a dummy user with password containing '@' or '#' or any other special symbol to verify that this condition is reproducible, a first step for a bug report.
Cheers

Ukelele generated custom keyboard layouts not working in Lion?

I asked this question in the stackexchange site a few days ago. Nothing I've tried has worked so far, except for creating a new account. Because a fresh account works, it's got to be something with my preferences, right?
http://apple.stackexchange.com/questions/21691/ukelele-generated-custom-keyboard -layouts-not-working-in-lion
Here's the question from above:
I created a custom keyboard layout with Ukelele (http://scripts.sil.org/ukelele) in Snow Leopard (idea is to generate scandinavian letters with Alt-key, otherwise have a pretty much standard U.S. layout). After the upgrade, the old installed (to ~/Library/Keyboard Layouts) layout wasn't working.
Ukelele seems to work OK in Lion, but whether I put the generated keylayout in a bundle or single file, or save it "/Library/Keyboard Layouts" or "~/Library/Keyboard Layouts" doesn't seem to matter.
Help?
EDIT:
@Sergio, I cannot choose the layout in Input Sources. One keylayout file I tried:http://semeai.org/~sjl/us-scands.keylayout
[EDIT: Removed unrelated stuff]
UPDATE 2011/08/15:
@Tom:
Copied your keylayout (it naturally ended up in my Junk folder):
midgard (01:55) >ls -l ~/Library/Keyboard\ Layouts/MongolianQWERTY.keylayout-rw-r--r--@ 1 sjl staff 44536 Mar 13 2008 /Users/sjl/Library/Keyboard Layouts/MongolianQWERTY.keylayout
Logged out, logged in, isn't showing in Input sources (I'm looking very closely between "Maori" and "Myanmar - QWERTY").
I've also uninstalled bunch of software and plugins giving suspicious messages to system.log, but hasn't helped.
UPDATE 2011/08/16:
I created a test account, and lo, the layout works perfectly for it. Also the bug in preferences doesn't show for that account. When trying this on my own account, there are no errors in Console logs with the suggested keywords (I can't seem to locate console.log file, though).
UPDATE 2011/08/16 later:
Nuking Library/Caches (and relogging) didn't help.
UPDATE 2011/08/17:
I did
% find Library -name "*.plist" -exec mv {} {}.renamed \;
and restarted, but it didn't help. I restored the situation with
% for file in `find Library -name "*.plist.renamed"`; \ do mv "$file" "${file//.renamed/}"; done
addendum: I also went through all the .plist files with plutil -s as described inhttp://www.askdavetaylor.com/can_i_check_my_plist_files_in_mac_os_x_for_problems .html. There was some brokennes, but in very unrelated applications.

Tom,
I think I love you.
That absolutely did it! Thanks so much!
If you'll answer with the same link in the stackexchange site, I'll mark the answer as correct, so you'll get the rep there.
Thanks,
Sami

DW CS5.5 Keyboard Layout BUG?! Help pls

Similar Messages

Maybe you are looking for