DW CS5.5 "Put" cannot ftp but Manage Site Test can

In DW CS 5.5 Build 11.5, clicking on "Put" or "Get" generates the error message "An FTP error occurred - cannot make connection to the host" but at Site>Manage Sites>Server>Test, I get "Adobe DW CS 5.5 connected to your Web server successfully". Is there more than one place in DW to configure FTP? Thank you.

After not working for a week, suddenly today DW works. "Put" and "Get" both connect. The only thing I did in the interim was successfully run Site>Manage Sites>Server>Test several times over several days. I am grateful for whatever fixed the problem, but I cannot explain it.  I thank those of you here who read and considered my question. 

Similar Messages

  • Help w/FTP and manage site

    I am trying to get to my Comcast personal web site and I am
    trying to use Dreamweaver to create the site. When I login to the
    site on IE/FireFox useing the FTP address ftp://upload.comcast.net/
    I get in OK but in DW 8.0 I go to manage site and enter in all of
    the same info I use in IE/Fire Fox or even Front Page and I get
    that DW can not connect and the following Error:
    AN FTP Error occured. Cannot make a connection to host. The
    remote host cannot be found. If I try it on another commercial site
    I maintain and I get the same results. Is there a way to check my
    DW 8 to confirm it is working correctly?

    Please go to SITES | Manage Sites..., select the site name,
    and click on
    Edit. Click on the Advanced tab at the top. Tell me the
    following -
    Under LOCAL INFO
    The contents of "Local root folder:"
    Under REMOTE INFO
    What happens when you press Test?
    The contents of "Host directory:"
    Thanks!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "tripleo" <[email protected]> wrote in
    message
    news:ej4vth$h0a$[email protected]..
    > Hi I am having a problem with FTP and Dreamweaver MX.
    >
    > I can log in correctly, the ftp connects to my webhost
    and everything is
    > fine
    > however when i want to upload a page or something for my
    site. it gives me
    > these errors:
    >
    > ERROR1
    >
    > dreamweaver cannot determine the remote server time.
    > the select newer and synchronize commands will not be
    available.
    >
    > ERROR2
    >
    > an FTP error occurred - cannot put FILENAME.
    > 500 Unable to service PORT commands.
    >
    > Can anybody help?
    >

  • Domain Users cannot RDP but Admin group users can

    Hi guys, need your urgent help. I have worked day and night on this issue. Basically the domain users if rdp to the server, it will get disconnected right away after place in domain account with password. However if logged on using console, I am getting
    the below error message:
    You cannot log on because the logon method you are using is not allowed on this computer. Please see your network administrator for more information.
    I have checked few items to remediate the issues:
    1. Done checked - Allow Log on through Remote Desktop Services RDP users group are in.
    2. Domain users are added to local RDP users group.
    3. KB 2667402 installed.
    4. Restarted the RDP service. 
    Please take note this server have RDS installed as well as Citrix client version 7.
    Evan Ting

    Hi Evan,
    Do you have any progress？
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Error for Sapgui 7.10: 'Cannot  initialize context management library'.

    Hi Xperts,
    While accessing system from logon pad I am getting an error "cannot initialize context management library".
    Can anybody help out for this.
    Thanks in advance,
    Chetan

    Hi Everybody,
    First of all remember that the 710 GUI is out of support.
    Refer SAP note 1322923   Maintenance strategy / deadlines BW Business
    For your problem please try the following:
    - deinstall the sapgui with following command line in START -> RUN
        nwsapsetup /uninstall /all /nodlg
    ( on the affected workstation )
    - uninstall the VCREDIST installation in the CONTROL PANEL ->
      ADD / REMOVE Software  -> deinstall the
      + Microsoft redistributable runtime DLLs VS2005 SP1(x86)
      + Microsoft redistributable runtime DLLs VS2008 SP1(x86)
      + MSXML 4.0
    - if exists, delete the folder
       C:\Program Files\Common Files\Sap Shared
    - delete all other folders where the sapgui was installed
       c:\%program files%\sap\sapsetup
       C:\%program files%\sap\Frontend
       C:\%program files%\SAP\Business Explorer
       C:\Documents and Settings\All Users\Start Menu\Programs\SAP Front En
       C:\Documents and Settings\All Users\Start Menu\Programs\Business
    - delete then all SAP entries in the Registry in
      HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDLL
    ( !!!!     ONLY the   SAP*  entries !!!! )
    After that reinstall the latest patches which should solve the issue.
    Regards,
    Naveen.

  • Managing Sites.

    When I go to Managing Sites I can set the name and location but the three selections on the menu are not availalable.  I click on them and nothing happens,
    I call support and the tech got on my system and all of the sudden every thing worked fine, I was able to close the session and test it and every thing still worked.
    After I got off of the phone I rebooted my system and checked it again and nothing works any more.
    I can't set remote servers or any of the advanced settings.

    Hi,
    could it be you use a template? Is there something like that in your source code:
    <!-- TemplateBeginEditable name="Edit......" -->
    <!-- TemplateEndEditable -->
    If not send us/me a link to your website.
    Hans-G.

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I am trying to create a new profile, but I cannot open profile manager in Mac OS 10.5.8. I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".

    Hello,
    I am trying to repair my Firefox profile, but I cannot open profile manager in Mac OS 10.5.8. When I follow the directions for opening profile manager in my Terminal utility, I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".
    At this point, Firefox (v 5.0 or previous versions), is not running.
    Thanks.

    [http://asqueella.blogspot.com/2010/12/dyld-unknown-required-load-command.html Here's an Explanation]. Basically you need to add "arch -i386 " at the beginning of the command because 10.5 is 32-bit only and more recent versions of Firefox default to 64-bit.

  • I have Photoshop CS5. I cannot see what I typed in a text box, but the layer lable exactly what I had typed. Thanks!

    I have Photoshop CS5. I cannot see what I typed in a text box, but the layer lable exactly what I had typed. Thanks!
    Thanh

    Thank Silkrooster for your prompt answer. I just figured out my trouble was caused by the font size was 12pt while the photo resolution was large 20M pixels. By changing the font size to 200 I was able to see all the text. Thanks again!
    Thanh

  • I updated my ipad to os 7 but after updates it asking me to put mu id but keep saying cannot unlock with this id

    i updated my ipad to os 7 but after updates it asking me to put my id but keep saying cannot unlock with this id

    This is Activation Lock. The iPad must be unlocked with the Apple ID used to originally set it up, or must first be removed from that accounts before you can activate it with your Apple ID. See here for information: http://support.apple.com/kb/PH13695

  • HT5527 I am using an older browser and OS because I cannot upgrade right now. I can access my email but cannot seem to put anything into the TRASH and if I do get some things to go in, I cannot empty. I would love to get compliant with my 5gb of free stor

    I am using an older browser and OS because I cannot upgrade right now. I can access my email but cannot seem to put anything into the TRASH and if I do get some things to go in, I cannot empty. I would love to get compliant with my 5gb of free storage!

        We are sorry to have lost you as a valued customer ndl9! I'm sorry to hear of the difficulties you are having with trying to pay your final bill. Our best recommendation is the pay my bill link, which should allow you access based on your former phone number or account number. Did you try both? As an additional option, you can reach our automated system from an alternate line by dialing 800-922-0204 and then entering your former wireless number. http://vz.to/1fdEQVi
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • Applications are updating but cannot install Application Manager?

    Applications are updating but cannot install Application Manager? Each time I try to open Application manager it tries to install every time.After installing several times I was able to finally see the problem. It says it cannont install because some Adobe program is running. I donot see anything Adobe running except for Application Manager in TaskManager.

    Ok, here is what the box that comes up says:
    We've encountered the following issues:
    Other instances of Adobe Application Manager are currently running which must be closed before installing this product. Please close or wait for them to complete.
    I checked control panel and only see the CS6 Master suite and Adobe Help Manager listed, not the Application Manager. Before I reinstalled I used The Adobe Clean tool to remove all programs and all but this one installed fine.

  • Manage Sites/FTP: Can't see site files in local view.

    Dreamweaver 5.5
    Mac OS X.6.8
    I have several sites set up in Dreamweaver. All are working correctly except one. This one site I moved files using Finder into a deeper directory and then moved them back up to the top level directory. I have been working with the site since and saving, so that's not the issue. I am mentioning it because that is the only unique thing about the site that isn't working.
    When I look at the site in the Files panel, I can see the directory I set up in Manage Sites but no files inside it. If I put all to my remote site, 0 bytes are transferred.
    So far I have
    1. removed the site and created a new one.
    2. Closed the app, blown away Drmwvr prefs, and reopened. The site is still there, so that prefs file doesn't cover it.
    Any ideas? I cannot FTP files to my host if Dreamweaver doesn't "see" the files I need to put.
    Thx
    Jacqueline

    2000sowell wrote:
    Dreamweaver 5.5
    Mac OS X.6.8
    I have several sites set up in Dreamweaver. All are working correctly except one. This one site I moved files using Finder into a deeper directory and then moved them back up to the top level directory. I have been working with the site since and saving, so that's not the issue. I am mentioning it because that is the only unique thing about the site that isn't working.
    When I look at the site in the Files panel, I can see the directory I set up in Manage Sites but no files inside it. If I put all to my remote site, 0 bytes are transferred.
    So far I have
    1. removed the site and created a new one.
    2. Closed the app, blown away Drmwvr prefs, and reopened. The site is still there, so that prefs file doesn't cover it.
    Any ideas? I cannot FTP files to my host if Dreamweaver doesn't "see" the files I need to put.
    Thx
    Jacqueline
    Moving files in Finder is fine as long as you can follow the moves in your files panel. Troubles start when you move files outside of DW and then can't keep up with them. Broken links, orphaned pages, etc.
    In Sites>Manage Sites you need to Edit the site in question and browse to the new root folder location. Then browse to the images folder and SpryAssets folder if you have one. Once you have redefined the site with the proper locations, the files will appear in the panel in DW.
    As long as you haven't deviated from the correct structure on the server, you should be able to put files and they will upload.
    As a rule, when moving or renaming files in a defined site, do it from within the Files Panel in DW, not in Finder. DW will update links and pages when you do and things will go much more smoothly.

  • How do I setup multiple users to use one source but manage playlists separately?  For example, play counts are specific to each user.

    How do I setup multiple users to use one source but manage playlists separately?  For example, play counts are specific to each user.

    Hi,
    Thank you for posting in Windows Server Forum.
    Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
    A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
    Understanding forwarders
    http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
    Configure a DNS Server to Use Forwarders
    http://technet.microsoft.com/en-us/library/cc754941.aspx
    Hope it helps!
    Regards.

  • How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

    I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
    Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
    Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
    Thanks for your review and am hopeful for a reply.

    Hi ITBobbyP,
    SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
    SSIS SFTP Task Control Flow Component
    available in the CodePlex which can invoked from SSIS.
    References:
    SSIS SFTP Task Control Flow Component approach
    WinSCP approach
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • I accidentally deleted the download stack, but managed to get it back. How can I change back to stack view?

    I accidentally deleted the download stack, but managed to get it back. How can I change back to stack view?

    Right-click on the folder icon on the dock where you put it. Change it from 'Display As: Folder' to 'Display As: Stack'.
    After that you'll be all set.

Maybe you are looking for