DW CS5 designed for the "UNTHINKABLE".

When designing a Web site DW CS5 helps the design aspects and the overall feel of the Web page. The all inclusive package is designed to improve older pages and new alike. Content, context, and concept is left to the design in mind of the Web author and artist. Together the potential of Web deisgn is defined by the aesthetics only seen on the internet. If DW CS5 was made to assist designing Web site pages from the PSD layout is there a way an already made Website that are common to ecommerce start up entreprenures like my self can substitue the PSD layouts I designed on photoshop. Would the files from the itemcart store I bought online able to switch templates with a personal design from photoshop save to web and devises. I'm assume that anything is possible since I only see that the PHP and the rest of the coding from the itemcart Website I bought online is what needs to be salvaged for my personal template I had designed previously on photoshop. I'll take any answers.

All depends on your shopping cart. Some carts are very flexible, some are not.
If you purchased stand alone software for your server it should have some detailed documentation on how to use it.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

How will an external Hard drive designed for the macbook Pro work with my White Macbook? My white macbook has a Firewire 400 and the G-Tech HD has a 800 to 400 compatible cable for the firewire.

I am asking this because I want the G-Tech Hard drive says that it is designed for the macbook pro. Yet, I want to back up faster with by using my firewire 400 which is not an option on the one designed for the white macbook that does not have a firewire (only a USB port.) The G-Tech Hard drive comes with the 800 to 400 compatible cable and has 5400 RPM with 750 GB. Also, I've heard that laptops with low battery (mine all the time) won't have the power for a bus powered Hard drive (as in no ac plug in adaptor.) Can I just plug in my laptop? Any one know the answers from experience with this hard drive?

As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

Need best Architecture design for the following scenario

Hi Experts,
I need best architecture design for the following scenario:
Sender: Mail
Receiver: if sender body contain u201DApproveu201D, then call SOAP adapter, If SOAP adapter execute successfully, then send Mail(SOAP adapter executed successfully) and SMS . So receiver is SOAP, Mail and SMS.
My current approach issue:
Three message mapping:
Mapping1: mail to SOAP
Mapping2: mail to Mail
Mapping3: mail to SMS
In interface determinant>u201DSelect all three operation mappingu201D> u201Cselect order at runtimeu201D.
Issue in current approach: For me first SOAP adapter should complete successfully, after that only my Mail and SMS operation mapping should execute:
But problem is before success of SOAP adapter engine, Mail and SMS mapping completed or integration engine executed.
Note: There is possible to fail the SOAP request in adapter engine.
Kindly help me --> u201CAm I going correct way or want to change the architectureu201D?
Thanks for advance!!
Regards, Kumar

What do you mean by successful execution of soap call? Are you talking about Successful response (happy flow) from the soap call instead of application error ? Then based on the response you want to decide sending mail and sms. How big call is your soap ? If your soap interface is very simple I can give the other possible way.
Sender sends the message, use mapping to read the content and then do soap call in the mapping itself and after seeing the soap response decide about two receivers (mail and SMS). If your soap call is very simple one, you can go for it. Otherwise I would not recommend this. The reason is you loose some visibility regards to monitoring during soap call in the mapping.
Other option is go for CCBPM. Here you receive the message, use send step to soap interface which is sync step. Then after seeing the response create another block with fork steps each for two senders mail and sms. If response bad then dont proceed or execute the next block. Simply use exeception or control step to jump out from the block,

A sleeve exclusively designed for the retina 15" macbook pro?

I want to buy a sleeve for my 15" retina macbook pro, but i realize that there are a lot of sellers that advertise their prodcuts as "made for retina" but in reality they were made for the classic macbook pro, so they fit loose , baggy... can you recommend a good sleeve specifically designed for the 15" retina macbook pro? I would like one with a pocket for the charger, so far these two are my choices:
Booq Mamba Sleeve 15 http://www.booqbags.com/us/sleeves/mamba-sleeve/MSL11-GRY
Incase Neopreno Pro Sleeve http://store.apple.com/us/product/HA175ZM/A/incase-15-neoprene-pro-sleeve-for-ma cbook-pro-with-retina-display?fnode=50

I am also looking for such a case. I find that since the Retina is smaller/thinner -- every case I try the laptop is swimming around inside. I also feel like the laptop itself is less bulky so I'd like a case that takes advantage of our ability to be more sleek and small while traveling.
Have you had any luck finding a case?

How to search in BI 7.1 query designer for the required key figures & chars

Hi All,
Can anyone plz tell me how to search in BI 7.1 query designer for the required key figures & characteristics. I have the query being built on a multiprovider which has many cubes.
So, i have a huge list of key figures and characteristics. I am not able to search for the required one by the name or the technical name.
How can we search and pick the required object from the enormous list of the Mutliprovider in the Bex Query Designer??
Thanks
Phani

There is not a search feature available. You have to do an educated guess under what dimension your infoobject could be and select.

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that?

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that? And whats this Creative cloud crap? I dont keep up new adobe stuff.

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that? And whats this Creative cloud crap? I dont keep up new adobe stuff.

Designing for the iPad 3 Questions

Hi Guys,
I am currently working on designing a digital magazine intended for the iPad 3.
When I design my psd working files at 1536 x 2048px at 300 ppi and then place them in the indesign file they appear to be about half the size that I would think they should be. So I exported the page as a PDF from indesign and then opened it in photoshop. When opened it's dimensions were 5588 x 7453 px at 300 ppi. So I saved this and placed it back in indesign and it appears to fit correctly.
This seems funny to me as it ends up being larger than a print publication. It ends up being around 21" x 29".
I know I must be doing something wrong but if I could please get a little bit of help it would be great.
I guess my basic question is how should I set my psd files up when designing for the iPad 3?
Thanks!

Hi Joe,
It seems like you are having some trouble with your ppi settings. If you are going to be designing for the screen (e.g. iPad, web) you need to use 72ppi. It may seem a bit odd as the iPad's actual ppi is significantly higher than this, but thats just the way it is. If you change your settings to 72 ppi, everything should go back to normal.
EDIT: Bob Bringhurst explains the difference between effective and actual ppis in this thread here: http://forums.adobe.com/message/4319794#4319794
Cheers!

Forums.ni.com site designed for the mobile user

Isn't it time there was a mobile site designed for the mobile device user wanting to catch up on discussions. While you can view the site on mobile devices, navigating around can be quite a chore. With the normal site there is too much information on the screen at any one time and having to zoom in and scroll about from left to right to read a message is a bit of a headache.
Regards
Ray Farmer

"Mobile optimized" sites will probably soon be a thing of the past. They were made to avoid problems with ultra tiny screens and very slow connections (remember GPRS?).
A typical mobile device now runs on 3G or even 4D and the screens are sometimes 800x640 or higher.
My android G1 phone is over 2 years old, and I still typically prefer the full site. I'll probably upgrade in a few weeks and will at least double the screen resolution. I'll stick with the regular site.
(One problem is the placement of the new kudos gadgets. It is impossible to see them at the same time with the post author, thus creating significant confusion to figure out what belongs to where ... ).
LabVIEW Champion . Do more with less code and in less time .

Is ios 5.1.1 designed for the 3gs 16gb

hi there, im new on here please can you help, is ios 5.1.1 ok and designed to run fine on the 16gb 3gs?

Some people say it slows down performance but it isn't available for download on the 3G but is for the 3GS so it is designed to run on that phone

Database design for the Project System!

Hi
I need the database design schema for the Project System .
For example with the transaction code CJ20N at the left side all the Project Hierarchy is tabulated.
I want to know the relations between tables ?
Would you please help me ?

look logical database PSJ with tcode SE36
grx. A.

Alternate design for the ORS org structure

Hi Gurus,
Need your expert advise on below issue. We are currently on SRM 5.0 using classic scenario.
We are currently exploring the feasibility of either adopting the HR org structure for ORS or an alternative to the org chart that supports workflow routing and is not cumbersome to maintain.
Please advise if there is any other alternate design aside from adopting HR org unit to ORS. Can also advise if that design as an org chart will support workflow.
Many thanks for the help.
jho

Thanks for the help

What are the right Color Settings and Proof Setup in Photoshop if you design for the web?

This question has come up numerous times, but I still haven't seen a satisfying, final answer. I would like to make sure that what I'm designing in Photoshop in regards to colors, saturation and brightness will be as close as possible as what I'm going to see in my Safari browser once that same page has been developed.
I understand there are going to be differences between monitors and browsers, but if I just could get an almost one to one translation in regards to color/saturation/brightness from my Photoshop file to that same developed HTML page in Safari that would be ideal.
Currently I set my Color Settings to Monitor RGB - Display and my Proof Setup to Monitor RGB. Not sure if these settings are correct.
Curious to hear your thoughts and advice.
Thanks,
-Tony

if AdobeRGB is the more professional working space, then why not use that profile?
on the web (and in unmanaged and broken work flows) sRGB is the safest profile (source space)
just open your tagged Adobe RGB and tagged ProPhoto RGB document (use the embedded profile in each document)
and go to View> Proof Setup: Monitor RGB (notice the loss in saturation? that's how most of the people on the Internet will be viewing your color, assuming you have a standard-gamut monitor like most people)
always CONVERT to sRGB for the World Wide Web
i didn't read your link
anyone who recommends "disable color management in Photoshop" -- set Working RGB to "Monitor RGB" -- AND MOST UNBELIEVABLY -- "Don't color manage this document" (ignore embedded profiles) ------ is pretty mixed up (in my opinion)
i will recommend reading JEFF SCHEWE and BRUCE FRASER for professional color management information

The New Card Design for the Barclays Ring.

I’m here to announce that the new card design has been finalized and it will be ready for new cardmembers in late July and existing cardmembers beginning in October. Here’s a quick recap of the very fun and innovative process that we went through together to co-create the next Barclaycard Ring card.
In 2014 we asked cardmembers in an open forum to describe what they liked and didn’t like about the design of their current Barclaycard Ring card. We received hundreds of comments and passed them along to our design team.
This resulted in the following plastic designs
Option 1.pngOption 2.png Option 3.png
Incorporating your feedback, the designers created a three dimensional view of the card designs, which we posted in the forum for more feedback. This round resulted in four unique plastic designs that were presented for an official vote.
Voting results.jpg
The winner, with 42% of the voting Ring cardmembers, was card design #1. We also noticed cardmember feedback regarding concerns about the font choice for the most popular card design. We took this feedback to the design team and they presented four more options to the internal team. We picked one and now it was time to see how these designs looked in reality. About 10 weeks later we got a “proof”, or an example of what the card would actually look like. And I will tell you that it did not look good. Luckily, one of the designers went out to visit the card production vendor. They worked with the design and the production process to get as close as possible to the original design.
And here it is:
C11_card_rRGB_RingMC_EMV.png
We hope you like it! Thanks to everyone who voiced their opinion and helped to shape the new design. And, yes, it is a chip card. (Interested in learning more about the Chip and Signature with PIN enabled technology? Click here for additional details.)
So who will get the new plastic and when?
Starting in October 2015 cardmembers who made at least one purchase in 2014 will automatically receive the new plastic in the mail. Your credit card number and the security code on the back will not change. However, if your expiration date is within a 3 year window, your new card will have a new expiration date. So you will need to remember to update any recurring billers, online merchants or digital wallets with the new date. Your old card will still be valid until sometime in early 2016.
Cardmembers who did not use the card to make a purchase in 2014 or became Barclaycard Ring cardmembers in 2015 will not be automatically re-issued the new card design. If you’d like the new card (with Chip technology), you can call the number on the back of your current Ring card after August 1st and request the new card design. Otherwise, you can wait until your current card expires and you will automatically receive the new card in the mail. We may also choose to automatically re-issue the cards in the future to cardmembers who still have the original orange card.
I hope all of that helps. Of course if you have any questions just leave it in the comments below. Thanks again for participating in the design of the new Barclaycard Ring card!

I'm apart of that community and I was shocked to see that this is all they could come up with. In todays market with the different plastics available this to me is very quaint. Not appealing and to think they had a committee and designers and all that... it's truely disappointing!

Any way to temporarily remove the clip from the ipod shuffle? I would like to see if it can be placed in speakers designed for the Nano.

is there any way to temporarily remove the clip from the ipod shuffle? I would like to try to connect it to speakers which are designed for ipod nano, but appear to be compatible with the shuffle, if it didn't have the clip.

Unfortunately, Apple can do no such thing. The most you can do is turn it over to the local authorities or the customer service desk if you found in a store or similar.
Kudos to trying to find the owner though!
B-rock

DW CS5 designed for the "UNTHINKABLE".

Similar Messages

Maybe you are looking for