DW FTP connect / time out?

We had our server hacked last week, now we are taking more
precautions.
Someone suggested while we are using Dreamweaver to be sure
to 'close' the ftp connection manually after each upload.
When does dreamweaver time out? (ie if we leave the office
and leave DW open, will the ftp connection remain 'open'
indefiently?)

yeah, i'm pretty sure you stay connected either until you
close the
program, or you click the little disconnect button, or you
get
disconnected in some other way. but you can have Dreamweaver
open and
disconnected from the site at the same. if you look at the
Files panel,
under the site name where the Get and Put buttons are,
there's a
connect/disconnect button.
redhedcoder wrote:
> We had our server hacked last week, now we are taking
more precautions.
>
> Someone suggested while we are using Dreamweaver to be
sure to 'close' the ftp
> connection manually after each upload.
>
> When does dreamweaver time out? (ie if we leave the
office and leave DW open,
> will the ftp connection remain 'open' indefiently?)
>
>

Similar Messages

  • FTP Connection Time-Out Issue

    *THE PROBLEM:* OS X specific FTP clients time-out intermittently when I try to upload files to any given server directory.
    *TROUBLESHOOTING FAILURES:*
    * Tried uploading the files to the same directory using different FTP clients (listed below).
    * Tried using another Mac in the same office with the same client to upload the same files to the same directory at the same time and different times.
    * Tried plugging in with an actual network cable cable.
    * Tried toggling on/off passive mode both in the FTP clients and the OSX system preferences.
    * Tried using the Binary (RAW DATA) upload format.
    * Tried recreating the FTP profiles for the connections.
    *TROUBLESHOOTING SUCCESS:*
    * Tried uploading the same files to the same directory at a different location
    * Tried uploading using filezilla in a Windows XP Pro virtual machine in my otherwise problematic work location.
    I'm a web-designer. So FTP is a major part of my work-flow. My connection follows this setup:
    My office is somewhat remote so my local ISP uses a Microwave transmitter (line-of-site) to make connection with a receiver at my home, which in-turn is plugged into a little wireless router. I connect to the wireless router with my Airport card in my MacBook Pro.
    I use a number of applications that are standalone or have integrated FTP clients including:
    * Fetch
    * Interarchy
    * Cyberduck
    * CODA (AND)
    * Dreamweaver
    Can anyone offer me any explanation why my FTP has these problems.

    Have you tried turning off the Firewall yet?
    Since you have Fetch, let's try the transcipt messages as ScottMcGuire puts it...
    http://fetchsoftworks.com/ubb/Forum2/HTML/003844.html
    I use TransmitX, see if it has the same problem...
    http://www.panic.com/transmit/
    Are the ping times on the PC & Mac much different? What are they?

  • SSIS FTP connection Time out issue

    Hi,
    I have a package about 300MB downloading from a client's FTP out side of company,it was working for about 1 year , now I got time out error after 60% downloading.
    I can manually download the package thru IE , so I guess it's NOT the connection issue. When I check the FTP connection , I noticed an interesting thing :
     1> Time out range is 1-300, and 0 should mean NO TIME OUT , however, it seem whatever number I saved for TIme out , it's back to 60 sec (Default value)  --I tried both on VS 2008 R2 and VS 2012
     2> Package will be timed out after 5-6 minutes after the package start running
    3> Error message is : 
    Connection manager "FTP Connection Manager"     Description: An error occurred in the requested FTP operation. Detailed error description: Receiving file "XXX.zip".  The operation timed out  .  End Error 
    Error: 2014-05-16 14:29:26.34     Code: 0xC002918A     Source: Download zip file from PV FTP FTP Task     Description: Unable to receive files using "FTP Connection Manager".  End Error
    Had anyone seen this error before ?  Any one tried to set the time out as 0 with succeed ?
    Thank you all in advance !
    -Eva
    EW

    Hi Eva,
    It may occur due to the Firewall blocking. Please add Inbound and Outbound rules for Port 21, and program DtsDebugHost.exe and DTExec.exe.
    As a workaround, you can use FTP batch file instead of the SSIS FTP Task:
    http://www.dostips.com/DtTipsFtpBatchScript.php 
    http://www.robvanderwoude.com/ftp.php 
    Regards,
    Mike Yin
    TechNet Community Support

  • Connection time-out but then immediately after, no problem

    For some reason, the first time I use pacman (after not having used it in a while), the connection times out, but when I Ctrl+C and then do the exact same thing, it starts working.
    Any ideas why?
    $ sudo pacman -S tmux
    resolving dependencies...
    looking for inter-conflicts...
    Targets (2): libevent-2.0.19-1 tmux-1.6-2
    Total Download Size: 0.44 MiB
    Total Installed Size: 2.19 MiB
    Proceed with installation? [Y/n]
    :: Retrieving packages from core...
    error: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from ftp.lysator.liu.se : Connection time-out
    ^Cerror: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from mirrors.ustc.edu.cn : Connection time-out
    Interrupt signal received
    $ sudo pacman -S tmux
    resolving dependencies...
    looking for inter-conflicts...
    Targets (2): libevent-2.0.19-1 tmux-1.6-2
    Total Download Size: 0.44 MiB
    Total Installed Size: 2.19 MiB
    Proceed with installation? [Y/n]
    :: Retrieving packages from core...
    libevent-2.0.19-1-i686 296.9 KiB 724K/s 00:00 [#####################] 100%
    :: Retrieving packages from community...
    tmux-1.6-2-i686 152.2 KiB 1801K/s 00:00 [#####################] 100%
    (2/2) checking package integrity [#####################] 100%
    (2/2) loading package files [#####################] 100%
    (2/2) checking for file conflicts [#####################] 100%
    (2/2) checking available disk space [#####################] 100%
    (1/2) installing libevent [#####################] 100%
    Optional dependencies for libevent
    python2: to use event_rpcgen.py
    (2/2) installing tmux [#####################] 100%
    Last edited by damd (2012-08-13 11:20:38)

    cfr wrote:Is this issue pacman-specific? Do you know that you definitely have a known-good connection when you're invoking pacman?
    I'm using SSH to connect to the server where this problem is happening, indicating that the LAN connection works. Before invoking pacman I've tried pinging google.com, which works flawlessly.
    The problem is still there, I just tried it.
    EDIT: This actually happens with wget too:
    $ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
    --2012-08-12 21:11:32--  https://aur.archlinux.org/packages/pa/p … ery.tar.gz
    Resolving aur.archlinux.org... ^C (took a very long time)
    $ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
    --2012-08-12 21:11:43--  https://aur.archlinux.org/packages/pa/p … ery.tar.gz
    Resolving aur.archlinux.org... 208.92.232.29 (works here)
    Last edited by damd (2012-08-12 19:12:35)

  • PACMAN: connection time out, PASV

    Hello:
    This seems to be a regular topic in the forum, but I tried to solve and I could not.
    I just installed Archlinux, so, I'm still in console mode and can not paste the information.
    When I try to do the:
    pacman -Syy
    for the update, I get that the connection times out.
    I activated the:
    XferCommand=/usr/bin/wget --passive-ftp -c -O %o %u
    For some diagnose, and it hangs in the tag PASV ..., which I do not the meaning.
    I uses ping and it works, I can receive and send packages.
    I selected different mirrors, like some 15, and, in all, I get this error.
    I changed in the /etc/rc.conf some network things: read in a forum that, in that file, I must change the:
    gateway="default gw 192.168.0.1"
    to
    gateway="default gw 192.168.1.1"
    And did not work. Also I take out the "!" in the gateway, with the same results. After all that, I putted in the original form.
    I'm behind a the most horrendous proxy in my college, it block many pages, but I do not thing that's the problem, because in Windows I can download from ftp, etc. After all, when using ping, it works!
    Any suggestion please?
    EDIT: I have a 64 bit system, if that suggest something.
    Last edited by gromlok (2010-04-19 12:30:17)

    Hello:
    Well, the "error" message is that the "connection times out", after that, it tries to reconnect to the same mirror, and again, it gives me that message. Later, it goes to another mirror -if I have it uncommented-, and so on, until my mirror list ends.
    In the /etc/rc.conf I uncommented the following line:
    XferCommand=/usr/bin/wget --passive-ftp -c -O %o %u
    So, when I do "pacman" I get some additional information -which I can not understand-, but It connects to the server of the mirror, and some flags appears, but in the PASV flag, it hangs, until I get the connection times out message. Any idea of what indicates this flag? -passive something?-
    In my /etc/resolv.conf I got:
    domain: XXXXX.com
    name server: XXX.XXX.X.XXX
    What can I do with this information. I did not modify any file after installation, just what posted at the beginning of the thread.
    I can ping to any page, for example, www.google.com, whit few lost data, and I receive the packages.
    Waiting for your answers. (help!!)
    Greetings
    Last edited by gromlok (2010-04-19 13:48:17)

  • [SOLVED] Pacstrap connection time-out

    SOLUTION: Don't be a newbie like me and not know what DNS stands for. What I did to solve my problem was simply modify my /etc/resolv.conf to point to 8.8.8.8 instead of my default gateway.
    G'day everyone, I apologize in advance for my lack of experience.
    I understand this distribution is not for beginners, but I personally love steep learning curves as it provides the most enjoyable and interesting experience for me.
    It's also the fastest way to learn.
    Albeit, I have yet to even successfully install Arch!
    I'm a little put off, but I've already deleted my Windows partition so now I am committed.
    Anyways, so I've been following the absolutely wonderful Beginner's guide. But I seem to have made some huge mistake, or something is terribly wrong.
    I'm only upto the part where it suggest typing "pacstrap /mnt base base-devel".
    However when I put that command in, I am eventually returned with:
    1 root@archiso ~ # pacstrap mnt base base-devel
    ==> Creating install root at /mnt
    ==> Installing packages to /mnt
    warning: database file for 'core' does not exist
    : : Synchronizing package databases...
    error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
    error: failed retrieving file 'core.db' from ftp.iinet.net.au : Connection time out
    Etc etc. I tried using the original Mirrorlist and that gave me back 30 odd different server connection time outs. So I switched to just the Australian servers. It managed to download the 'extra' and 'community' packages when I swapped (they weren't downloading earlier either).
    I've done a bit of searching (probably not enough) but I'm about to head off to sleep as it's almost midnight and I have work tomorrow. So I figured there's no harm in posting as that gives people many hours to respond. What I did find in my searching was that things like this occur when iPv6 is enabled. Unfortunately I don't have the luxury of restarting (or so I believe), because as you may have seen I'm actually trying to still install! So I'm a little stuck? Any help at all is appreciated, even if it's like
    ArchLinuxPro wrote:Get out of here, you are too noob, go look at *insert easy way to learn Arch Linux here*.
    Thanks,
    Aaron.
    Last edited by Ikbosh (2012-09-23 16:41:37)

    ajaykumar wrote:
    Hi lkbosh,
    Ikbosh wrote:Although, I started Arch up into a VM environment and had no issues installing base and base-devel.
    I think you can use those installed packages in order to install into your home computer. Please go through the following link
    Custom Local Repository - Howto
    I think it might help you in easy-install
    With regards,
    Ajay Kumar G
    Unfortunately there's no way for me to connect to this VM remotely from home. Our work network is locked up pretty tight.
    DSpider wrote:Or try the link above that: https://wiki.archlinux.org/index.php/Pa … _USB_stick
    I'd do that, but I'm too far away from getting a running Arch linux inside my VM (Ended up having to do work most of the day ), let alone enough time to configure Guest Additions
    plustwo wrote:
    can you ping google.com?
    you might also check your /etc/resolve.conf.
    and are going through a proxy perhaps?
    tnx
    Prior to deleting
    inet 192.168.2.232/24 brd 192.168.2.255 scope global eth0
    I was able to ping google. My "/etc/resolve.conf" pointed to my router and there are definitely no proxies that I'm going through.
    Off topic: Also, I just found out they are allowing pre-loading of Borderlands 2 D:
    I think I might have to just grab another SSD from here at work and use that for Linux.
    Because I deleted Windows 8 off my current SSD because it was being an arse and not letting CFDISK or Parted or GParted (Ubuntu Live) from seeing the partitions (I gave Arch ~10GB to mess with on the SSD and ~100GB on my HDD).
    Last edited by Ikbosh (2012-09-18 08:57:12)

  • Itunes update to firmware fails, because connection times out.

    I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now.  I have spent many, many hours on this, and many phone calls to apple support.  I disable Norton 360, and windows firewall, and my firewall on my router.  I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one.  Itunes diagnostics gives me the following information.  I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin. 
    Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
    I've tried downloading iOS 5 and then updating using restore, but that didn't work.  I've poured through support forums, and error codes: I get 1611, etc.  Cannot seem to resolve this.
    Any ideas? 
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    System manufacturer System Product Name
    iTunes 10.5.0.142
    QuickTime not available
    FairPlay 1.13.35
    Apple Application Support 2.1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.2.0
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.96
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.3.494
    Gracenote MusicID 1.9.3.106
    Gracenote Submit 1.9.3.136
    Gracenote DSP 1.9.3.44
    iTunes Serial Number 0040A7BC031F98E0
    Current user is not an administrator.
    The current local date and time is 2011-11-15 11:35:00.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 4800 Series       
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
    iPodService 10.5.0.142 (x64) is currently running.
    iTunesHelper 10.5.0.142 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
    Description:          Realtek PCIe GBE Family Controller
    IP Address:          192.168.2.2
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.2.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.2.1
    Lease Obtained:          Tue Nov 15 11:32:39 2011
    Lease Expires:          Tue Nov 15 11:32:38 2011
    DNS Servers:          192.168.2.1
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    SSL 3.0 Support:          Enabled
    TLS 1.0 Support:          Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-11-15 11:33:52.

    Disable your firewall/security software and try again.

  • Message Mapping - connection time out

    Hi ,
    I hae just created a message mapping and when I click on Test tab and load a payload in source and try to test the mapping , it gives me connection time out error from java...
    What could be wrong ? Mapping involves an XML to IDOC .
    Cheers,

    Hello,
    I think so (Experts, please correct me if I'm wrong). Before, we had a scenario in which the external definition was about 960kb. It really did post issues when testing in the message mapping itself. There are three options:
    a.) Use less detail in your sample message mapping, in this way you can correct the error in the mapping itself.
    or
    b.) Test in operation mapping, and then do the correction in message mapping afterwards. If the testing is successful, make sure that you don't click the drop down icon. Instead, export the result as a zip file and then extract it. (if this hangs, go for c)
    or
    c.) Test at runtime
    Hope this helps,
    Mark
    Edited by: Mark Dihiansan on Dec 20, 2010 10:09 AM

  • Connection time out error in server proxy

    Hi
    My scenario is file to proxy. . It is synchronous scenario.
    I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and  after that send a response. it is working fine only if i give less than 60 sec.
    If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
    Please help me to solve this.
    Regards
    Divia

    To increase Timeout use
    Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
    look blog for timeouts:
    The specified item was not found.

  • Connection time out error in HTTP

    Hey guys
    i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
    even in RZ10 i cant find the correct profile parameter.
    i m taking help from michaels blog
    /people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
    i m on PI7.0 SP09
    is there some other place i can find this entry? or do i need to ask the basis guys to add it?
    thanx
    ahmad

    Also, there may be other factors to consider depending on your scenario.  If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
    Regards,
    Jin

  • Connection time out

    Hello everyone,
    I'm using modem PK5000 from Century Link. My other two desktops are using Window and in the same room w my modem.
    I got connection time out every time my computer started playing the screen saver.
    All I have to do is restarting my modem but it's so unconvinience.
    I called Century Link customer service and all they told me is changing the channel but it didn't solve the problem.
    At school and other people's places, my wifi works just fine.
    I used cleanmymac about a month ago and this problem started a week ago.
    Can cleanmymac cause the problem? If so, how can I check and fix it?
    I check the apple store to update my software but everything is up to date.
    Can it be the firmware of my modem? My brother who uses the two desktops (and they connect to the modem with LAN cables) upgraded firmware last week and it seems like when the problem started.
    And when my Mac loses the wifi signal, my printer still has the signal, but my desktop cannot log-in to page 192.168.0.1 which manages the modem and wifi even though the desktop connects w my modem by LAN cable and it still connects to the internet.
    If you have any clue, please help!
    Thank you so much!

    Thanks Todd, Wayne,
    this network timeout sure seems to be the guilty one!
    I've changed it, lets see if it's fixed but sure looks like it.
    The thing is that I was looking for GWWS tuning here :
    http://edocs.bea.com/salt/docs20/ref/comref.html#wp1117652
    but should have looked here
    http://edocs.bea.com/salt/docs20/admin/config.html#wp1056667
    Thanks,
    Gary

  • Connection time out error

    Hello sir,
    Whenever i install addon on SAP B1 i get connection time out error can anyone help me

    Manish,
    it depends on how you set your connection. it must be through command line argument. if you have set your connection string as
    sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
    then change it to
    sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
    and  give the connection string 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056 as your command line argument in project properties -- Debug tab. prepare the addon ard and try installing it.
    regards,
    Binita

  • Connection time-out issues each first try of pacman

    Hi,
      I am new to arch. I keep getting a connection time-out each time I use pacman for the first time. I have to do a ctrl+z to stop the command and then delete the db.lck file and then when I run pacman again, any operation on pacman that I had tried works flawlessly.
      Do I need to do something to fix this? I check there was a similar thread in 2012, but it ended without any results.
    Cheers,
    Prashanth

    geekoo wrote:@WonderWoofy: The second time on it works with the same mirrors. I am using the Indian http mirror at the top of the list. US mirror follows. When it fails, it takes a sweet 30 odd minutes to run through all of the mirrors and fails.
    I'm pretty sure you can disable all the mirrors you don't want to use, try lowering the list to only those in Asia to minize your waiting time atleast. I get a time-out occasionally on the first run, but running anything inside China's GFW is a roll of the dice.

  • "connection time-out occurred" when my mac goes to sleep.

    When My macbook goes to sleep I get a "connection time-out occurred" when I try to connect to the internet. and I have to restart my mac and restart the router. The is always a BT hotspot page displayed on the screen.
    I have a 2011 macbook pro. This happens on my son's as well. he has the same model. he recently got a new retina display macbook and there hasn't been any problems. this doesn't happen on our phones either.
    -Thanks for any help

    I don't think the post can be edited after 10 or 15 minutes, what madking can do is ask host to remove it from this forum.
    In addition to my own post, here are the correct link.
    try to reset PRAM and SMC to refresh your macbook hardware behaviour:
    http://docs.info.apple.com/article.html?artnum=2238\
    http://docs.info.apple.com/article.html?artnum=303319
    Good Luck

  • Connection Time Out exception

    Hi All,
    I want to handle to Connection Time Out exception when displaying the BW Report in Portal. Please provide inputs.
    Also, is it possible to handle some look and feel of the BW Report from Portal itself.
    Regards
    Nikhil Bansal

    Hi Nikhil,
    Look at this link, this will be provide you solution
    <b>Connection Timed Out in Web Reports>
    if it helps you, please rewards points.
    Regards,
    Nisarg Patel

Maybe you are looking for

  • Panasonic DVCPRO HD VTR capture issue

    Hi, I am new to Final Cut and am having a problem capturing recently shot DVCPRO HD footage into Final Cut. I set it up to the proper settings and went to the log and capture window. THe problem is that the Final Cut doesn't seem to have control over

  • Is there solution to block user to adopt a Purchase Requsition to PO twice

    Hi All, Please advice. How can we block user to adopt a PR twice. In other words, let say  user A have a PR number 3xxxxxxx then user A adopt this PR no to PO and get PO no 5xxxxxxx with status hold because of an error. In the next day another user B

  • Delay afte I plug in headphones

    Like the subject line says I get a 2-3 sec delay after I plugin my headphones...I can be playing without them and it is fine, but when I try to play using the head phones I get the delay. I am using my 810-L10 Taylor plugin to the back of my 24inch i

  • Transaction for mass material master change history

    Hi, Is there a transaction where I can see all materials that have had changes to their material master within a date range? Example: I want to see all materials that had changes to their master between Sept 7th and Sept 10th Thanks in advance!

  • How to use long texts in explanation tool tip?

    Hi ,      Can anyone tell me how to add long text in Explanation tool tip? I am able to use short OTR texts in explanation tool tip but not able to use long OTR texts. Thanks and regards, Vivek Shetty.