DW MX Studio 2004 Patches

Can I still download the patches and code updates for DW MX
Suite 2004? Or have them stopped offering that and can only upgrade
to the latest version now. Thanks.

On 17 Sep 2006 in macromedia.dreamweaver, hemitime wrote:
> There used to be a set of pathces on the old macromedia
website for
> my version...a patches that corrected some known
bugs...and now I
> can't seem to find it anywhere on the website.
Use the search box on the main page at
http://adobe.com/ to search for
the words [dreamweaver patch]; the second search result will
bring you to
this page:
http://www.adobe.com/support/dreamweaver/downloads_updaters.html#dwmx2004
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

Similar Messages

If Choose from list function included after SBO 2004 patch 31?

Hi, there
I know Choose from list function valid in SBO 2005, but I don't know if it is included in SBO 2004, especially after SBO 2004 patch 31?
Thanks.

Hi Indika,
You are right - the Choose from list is only available from SBO 2005.

Is SAP NetWeaver Developer Studio 2004s Supported on SUSE Linux

Hi,
Is SAP NetWeaver Developer Studio 2004s supported on Linux? It appears you can get a trail version of SAP NetWeaver Developer Workplace 2004s for Linux but there are no installation guides (SAP NetWeaver Developer Workplace nor SAP NetWeaver Developer Studio) to be found anywhere.
Thanks,
Luke

Hi Sajesh,
The SAP NetWeaver Developer Studio Installation Guide does not say Linux is supported (see below).
Luke
1 Overview
Purpose
This document describes how to install the SAP NetWeaver Developer Studio as a standalone version. To install as part of the SAP NetWeaver Developer Workplace, see the installation guide Developer Workplace for SAP NetWeaver 2004s.
You can see the SAP NetWeaver installation guides at service.sap.com/instguides.
Platforms
You can install the SAP NetWeaver Developer Studio on:
Windows 2000
Windows XP
Web Browser
You require Internet Explorer 5.5, or higher.
Minimum Hardware Requirements
The SAP NetWeaver Developer Studio requires approximately 500MB disk space, 512MB RAM, and an 800MHz processor.

Is SAP NetWeaver Developer Studio 2004s Supported on Linux?

Hi,
Is SAP NetWeaver Developer Studio 2004s supported on Linux? If so, where is it in the PAM (Product Availability Matrix) and Linux specific installation guide(s)? Everything I can find does not talk about running and or installing SAP NetWeaver Developer Studio 2004s on Linux.
Thanks,
Luke

Thanks Jordan!
Luke

Sun studio 11 patched arggg...

Hi we have sun blade 2500 and latest solaris sparc OS also sun studio 11
sun update manager works for OS patches but cant work for sun studio 11 patches every time find a new patch for OS and show me the remaning ss11 patches when i was attempt to install only ss11 patches are failed
how can i solve the issue ?
Thanks
Uraz Yavanoğlu
Gazi University
Computer Engineering Department

Your problems installing the Sun Studio 11 patches through Update Manager have been encountered previously in regards to globally installed packages and was due to a combination of bug ID's 6337009, 6214678 and 6374972 for the patching utilities of which the last is still open.
You will currently have to manually install the patches using patchadd with the "-G" flag whilst in the global zone to install them in the global zone only.

Need help on SAP netweaver Bex Analyser Release 2004s,patch 700.

Hi BW Buddies,
Hope everyone is fine.
I just installed the SAP netweaver Bex Analyser Release 2004s,patch 700.
The look and feel of this BEx is different from that of BW 3.5 Bex.
Can anybody suggest me some good documentation about the new Bex Analyser?
Any kinda reply for this is appreciated.
Thanks in Advance
Sam Mathew

Check this link:
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
KJ!!!

How do I know my SAP NetWaver 2004s Patch Level

Where can I see my SAP NetWaver 2004s Patch Level Information?

In any of your SAP sessions choose System menu option and click on Status --> you see a window where you find SAP System data ..Click on the magnifying button and you shd see SAP_BW under software component and in the same row you shd find release hightest support pack..level..

Flash MX 2004 Patch / updates

Hi Hope this is in the right area.
At the school where I work we use a package system to deploy
software, and after deploying Flash MX 2004, we have found that it
keeps asking us for the product key. From what I have been told and
read this is a bug with in V7.2 and a patch was released to fix the
problem.
Does any one have a copy of the patch or know where I could
locate one to correct this problem, as I have 200+ computers that
will need the key.
I would appreciate any help with this problem.
Thanks
Rob

Hi Walter
Thanks for your reply unfortunately it had no effect on the
problem. I contacted Adobe support and it was their advice to use
the forum, as they could no longer provide support for this version
of flash.
Thanks anyway.
Edit 13th Oct 08 13.09 - Sorry to change the topic a pit but
the company that installed the network CSE have advised that a
network intall of studio mx 2004 might correct the problem. Could
any one provide me with instructions on how to do this?
Rob

What Sun Studio 12 patches are included in Sun Studio 12 Update 1?

I can't seem to find a bug list or patch list for Sun Studio 12 Update 1. Can someone provide a link or list of what was fixed?
Secondary, how do I know I have Sun Studio 12 Update 1 installed? Does CC -V say 5.9.1?
-kto

I'm not sure about your bug list or patch list question, but on your second question you can use the "version" command.
Just point it at the Sun Studio component you want to check. So for the CC compiler :
% version sunstudio12.1/bin/CC
version of "sunstudio12.1/bin/CC": Sun C++ 5.10 SunOS_sparc 2009/05/02
You can also just type "version" and that will list all the
components of the Sun Studio that are in your PATH, like so :
% version
Machine hardware: i86pc
OS version: 5.10
Processor type: i386
Hardware: i86pc
The following components are installed on your system:
Sun Studio 12 update 1
Sun Studio 12 update 1 C Compiler
Sun Studio 12 update 1 C++ Compiler
Sun Studio 12 update 1 Tools.h++ 7.1
Sun Studio 12 update 1 C++ Standard 64-bit Class Library
Sun Studio 12 update 1 Garbage Collector
Sun Studio 12 update 1 Fortran 95
Sun Studio 12 update 1 Debugging Tools (including dbx)
Sun Studio 12 update 1 IDE
Sun Studio 12 update 1 Performance Analyzer (including collect, ...)
Sun Studio 12 update 1 Performance Library
Sun Studio 12 update 1 Scalapack
Sun Studio 12 update 1 LockLint
Sun Studio 12 update 1 Building Software (including dmake)
Sun Studio 12 update 1 Documentation Set

How to apply signed patches to Studio 11 under Solaris 10?

I'm running Solaris 10 6/06 on a Sun W2100z (x86_64) workstation. I have a long history of experience with Solaris, but I'm not terribly familiar with the things that are new or different with 10, including zones and the new patch management tools.
I want to apply the latest patches to the various components of Studio 11, e.g. 120759-08,
121018-04, etc. Since all the other patches I've applied (for other OS subsets) have been "signed" patches, I was hoping to stay consisent and apply signed patches to Studio 11 too. I've been foiled at every attempt, though, so I'm looking for some help.
- if I use /usr/bin/updatemanager to select and attempt to apply the patches, I just get error
messages saying that the patches could not be applied:
121016-03 Sun Studio 11_x86: Patch for Sun C_x86 5.8 Compiler            Failed
Utility used to install the update failed with exit code {0}.
120762-02 Sun Studio 11_x86: Patch for Performance Analyzer Tools       Failed
Install of update failed. Utility used to install the update is not able to add packages. Utility used to install the update failed with exit code 5.... and so on.
- if I try using "smpatch" to add the patch, I get this error:
$sudo smpatch add -i 120759-08
add patch 120759-08
Transition old-style patching.
Patch 120759-08 failed to install due to a failure produced by pkgadd.
pkgadd: ERROR: The package <SPROlang> is currently installed on the system in the
global zone. To install the new instance of this package in the global
zone only, you must specify the -G option. To install the new instance
of this package in all zones you must first remove the existing instance
of this package from the global zone first (via pkgrm) and then install
the new instance of this package in all zones.
pkgadd: ERROR: package <SPROlang> cannot be installed on this system/zone- if I try to use "patchadd" directly with the jar file in the current directory, I get this:
$sudo patchadd 120759-08
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
120759-08
Verifying signed patch <120759-08>...
Verifying digital signature for signer <es-signature>
ERROR: Signature verification failed while verifying certificate <subject=Sun Microsystems Inc Root CA, issuer=GTE CyberTrust Root>:<unable to get local issuer certificate>.
ERROR: Unable to verify signature for signer <es-signature>
Signature invalid on signed patch <120759-08>.
Patchadd is terminating.That's three strikes, and I'm out of ideas. Any suggestions for how one goes about applying signed patches for Studio 11? I'll switch to unsigned if I have to, but this seems like it shouldn't be this hard.
Thanks,
Tim

I started a new thread on the updatemanager forum.
http://forum.sun.com/jive/thread.jspa?threadID=107410
I found that forum by googling for "updatemanager" and "zones", but
I couldn't find any recent information on this issue. It seems the
problem has been known about for a while now.
--chris

Studio 12 with latest patches and wxGTK 2.8.10

Anyone build wxGTK 2.8.10 on Solaris 10 with the Studio 12 compiler + latest Studio 12 patches? /opt/SUNWspro/prod/include/CC/Cstd/memory now has:
template <class _T , class _Base>
class __rw_basis : public _Base
    _T __data_;
public:
    __rw_basis(const __rw_basis& b) : _Base(b), __data_(b.__data_) {;}
    __rw_basis(const _T& t, const _Base& b) : _Base(b), __data_(t) {;}
    __rw_basis(int t, const _Base& b) : _Base(b), __data_((_T)t) {;}   // TEMP
    __rw_basis operator=(const _T& t) { __data_ = t; return *this; }
    __rw_basis operator=(int t) { __data_ = (_T)t; return *this; }   // TEMP
    __rw_basis operator=(const __rw_basis& r)
    { __data_ = r.__data_; return *this; }
    __rw_basis operator=(const _Base& b)
    { *this = __rw_basis<_T,_Base>(__data_,b); return *this; }
    operator _T() { return __data_; }
    _T data() const { return __data_; }
};It use to have "T" rather than "_T":
template <class T , class Base>
class __rw_basis : public Base
    T __data_;
public:
    __rw_basis(const __rw_basis& b) : Base(b), __data_(b.__data_) {;}
    __rw_basis(const T& t, const Base& b) : Base(b), __data_(t) {;}
    __rw_basis(int t, const Base& b) : Base(b), __data_((T)t) {;}   // TEMP
    __rw_basis operator=(const T& t) { __data_ = t; return *this; }
    __rw_basis operator=(int t) { __data_ = (T)t; return *this; }   // TEMP
    __rw_basis operator=(const __rw_basis& r)
    { __data_ = r.__data_; return *this; }
    __rw_basis operator=(const Base& b)
    { *this = __rw_basis<T,Base>(__data_,b); return *this; }
    operator T() { return __data_; }
    T data() const { return __data_; }
};The T causes a problem for wxGTK which defines T() and uses it throughout the wxGTK source base. Why the change from "_T" to "T"? Is it because of bug #6797621? What's the best way for me to fix this?

I knew I'd seen this before:
[http://forums.sun.com/thread.jspa?forumID=850&threadID=5376645|http://forums.sun.com/thread.jspa?forumID=850&threadID=5376645]

I am having problem with MDV Studio.

Hello happy guys, whatzup? Guess all ya 'r doing fine? Right!
I am using Dreamweaver from Macromedia Studio 2004. I am having problem with Inserting Record into Access database using the forms I create on my .asp document. I am using IIS and Javascript as my Document Technology. The error I usually have is:
"Technical Information (for support personnel)
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/site_files/user_regform.asp, line 78
Browser Type:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/530.5 (KHTML, like Gecko) Chrome/2.0.172.28 Safari/530.5
Page:
POST 41 bytes to /site_files/user_regform.asp
POST Data:
uname=Honesty&pword=admin&MM_insert=form1
Time:
Tuesday, June 02, 2009, 1:49:39 PM"
Please I need assistance on how to solve this problem. Thank you.
Similarly, I don't really know how to write sql strings - I just give commands and Dreamweaver will generate the sql strings. Yet, I still observe errors. But I think, for the sql aspect, I'm undergoing a tutorial note that I downloaded on the internet.
Please help me to solve this error problem at the moment. The sql knowledge is not the problem. I can get that at my leisure.
Thank you.
Eyo Eyo (Nigeria).

It sounds like you do not have an internet connection (wifi arcs in the upper left does not mean you have a connection) since Safari does not work also.. Try the following:
- Reset the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Studio 12: C compiler generates bad code with -m64 -KPIC -xO2

Hello,
after upgrading my Solaris 10/x64 machine from Studio 11 to Studio 12 some problems were fixed, but others came up; like this one:
I have a code snippet that obviously causes the C compiler to generate wrong code if compiled with options -m64 -KPIC -xO2. If any of these options are missing, it runs fine. Here's the example code:
#include <stdio.h>
#include <strings.h>
static int do_something() { return 0; }
static int foo() {
    fprintf(stderr, "\n!! BUG: BAD CODE! unexpected function call foo()!\n\n");
    return 222;
static int bar() {
    fprintf(stdout, "\nOK: bar() called\n\n");
    return 0;
static const struct {
    const char* name;
    int (*func)();
    int flag;
} tab[] = {
    { "foo", &foo, 0 },
    { "bar", &bar, 0 },
    { 0, 0, 0 }
int main(int argc, const char** argv) {
    int i;
    for (i=0; tab.name; i++) {
if( strcmp(tab[i].name, "bar") == 0 ) {
if(tab[i].flag) {   /* not reached */
if(!do_something()) {
return 2;
return (*tab[i].func)();
return 1; /* not reached */
Many lines seem to be bogus, but they are actually needed to reproduce the problem.
This is what happens:# cc -m64 -KPIC -xO2 bug.c && ./a.out ; echo $?
!! BUG: BAD CODE! unexpected function call foo()!
222
If I compile with debugging information (-g), I get expected behavior, which is:# cc -m64 -KPIC -g bug.c && ./a.out ; echo $?
OK: bar() called
0
While creating the test case I've also seen SIGSEGV at runtime in the bug case - which is probably due to a wrong calculated function address for jmp (just guessing).
Does anyone know if this is a known bug?
Any help is appreciated.
The rest of this posting is information about my system and Studio 12 patch level:# uname -a
SunOS v20 5.10 Generic_137112-08 i86pc i386 i86pc
# /usr/SUNWspro/bin/version
Machine hardware: i86pc
OS version: 5.10
Processor type: i386
Hardware: i86pc
The following components are installed on your system:
Sun Studio 12
Sun Studio 12 C Compiler
Sun Studio 12 C++ Compiler
Sun Studio 12 Tools.h++ 7.1
Sun Studio 12 C++ Standard 64-bit Class Library
Sun Studio 12 Garbage Collector
Sun Studio 12 Fortran 95
Sun Studio 12 Debugging Tools (including dbx)
Sun Studio 12 IDE
Sun Studio 12 Debugger GUI
Sun Studio 12 Performance Analyzer (including collect, ...)
Sun Studio 12 X-Designer
Sun Studio 12 VIM editor
Sun Studio 12 XEmacs editor
Sun Studio 12 Performance Library
Sun Studio 12 LockLint
Sun Studio 12 Building Software (including dmake)
Sun Studio 12 Documentation Set
Sun Studio 12 /usr symbolic links and GNOME menu item
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/cc": Sun C 5.9 SunOS_i386 Patch 124868-07 2008/10/07
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/CC": Sun C++ 5.9 SunOS_i386 Patch 124864-08 2008/10/16
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.3 SunOS_i386 Patch 127002-04 2008/04/16
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/dbx": Sun Dbx Debugger 7.6 SunOS_i386 Patch 124873-06 2008/08/20
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/analyzer": Sun Analyzer 7.6 SunOS_i386 Patch 126996-04 2008/09/03
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.8 SunOS_i386 Patch 126504-01 2007/07/19

I'm watching Bug ID: [6774287|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6774287] for quite a while and it seems to be fixed some time ago (State: 8-Fix Available, bug). Does anybody know if the fix made it in some officially available SunStudio 12 C compiler (backend) patch already? I'm using this SS12 patch-level meanwhile:
# /usr/SUNWspro/bin/version
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/cc": Sun C 5.9 SunOS_i386 Patch 124868-08 2008/11/25
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/CC": Sun C++ 5.9 SunOS_i386 Patch 124864-09 2008/12/16
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.3 SunOS_i386 Patch 127002-05 2008/10/21
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/dbx": Sun Dbx Debugger 7.6 SunOS_i386 Patch 124873-06 2008/08/20
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/analyzer": Sun Analyzer 7.6 SunOS_i386 Patch 126996-04 2008/09/03
version of "/usr/SUNWspro/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.8 SunOS_i386 Patch 126504-01 2007/07/19

Web service in netweaver 2004s

Dear experts,
I created a web service based an RFC function module and my bw system is Netweaver 2004s patch level 19,so this webservice can not be configured in transaction wsadmin and wsconfig.
And it can only be admined in new transaction SOAMANAGER or WSADMIN2. It said after patch level 14 new created webservice are hidden in wsadmin.
We did not configure J2EE server in our bw system and only have ABAP web,when I tried soamanager I got an error.
Is it possible that we can use soamanager to configure this webservice without installing J2EE enginee?
Or we have to use J2EE to configure web service after patch level 14.
Thanks
Best regards
Fanchest

Hi Fannie,
SOAMANAGER is a Web Dynpro for ABAP application. It does not require a J2EE stack to run.
Perhaps your ICM is not configured properly?
Cheers
Graham Robbo

Netweaver 2004 : How to create an pdf without need to use Adobe Control ?

Dear WebDynpro experts,
in my application I use Adobe interactive forms to create a pdf document for printing purposes.
I provide it as download using the file download GUI element.
There's no need to work with the pdf document afterwards, sionce it is only needed for printouts.
If I use my application with Firefox this works great. I can download my pdf without any problem.
But if I try to use Internet explorer and wand to download the pdf I always get the message that I have
to install Adobe Control into my Internet explorer.
Is it possible to configure my application the way that I don't need the adobe control on my Internet explorer ?
Is there a better way to provide non interactive pdf documents ?
Best regards,
Daniel

Dear Ruturaj,
thanks for your answer.
Unfortunately Í don't have an "display type" property for Interactive form.
I have beneath the Event and Event properties the following properties in my
property list for the Interactive Forms element :
data source
enabled
height
id
mode
pdfsource
templatesource
tooltip
visible
width
I also checked the Form Properties within the designer and didn't find a display type property.
I assume this is due to the fact I use an old version of Netweaver Developer Studio since I have
only Netweaver Developer Studio 2004 SP 20.
is there a way to switch off Active X using such a version ?
Best regards,
Daniel

DW MX Studio 2004 Patches

Similar Messages

Maybe you are looking for