[DW + PHP + MySQL] is there an extension to create dynamic charts?

Hi all
is there an extension for DW (I have DW 8) that let you
create dynamic
chart based on a mysql database?
Once upon a time there was an interakt extension that was
created just
for this kind of applications, but now it is discontinued
(thanks
adobe) and I can't even buy it.
Is there an alternative?
Thanks in advance.
tony

Check
http://www.webassist.com. They
have one.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"sweetman" <[email protected]> wrote in message
news:[email protected]..
> Hi all
>
> is there an extension for DW (I have DW 8) that let you
create dynamic
> chart based on a mysql database?
>
> Once upon a time there was an interakt extension that
was created just
> for this kind of applications, but now it is
discontinued (thanks
> adobe) and I can't even buy it.
>
> Is there an alternative?
>
> Thanks in advance.
>
> tony

Similar Messages

Extension to create dynamic flash forms?

Hi, im looking for some extensions to create on click dynamic flash forms..
does anyone now where could i found an extension like that?

What sort of extensions did you have in mind?

PHP/MySQL hotfix, PCRE & session extensions

The book I'm reading now has a link to a hotfix for DW 8.0.2
on the errata page. My version identifies itself as v8.0. Do I need
to install this. I have magic quotes off in PHP(v5.2.4). The book
says I require the xsl extension (which the hot fix mentions). I've
already had to make 4 stabs at this install to get to what I
think is correct. I don't like adding stuff that might cause
more problems. The Adobe literature/link is listed below:
http://kb.adobe.com/selfservice/viewContent.do?externalId=b6c2ae2a&sliceId=2
I also want to know... The book says that I need the pcre
extension enabled. I looked in the ini file and found:
[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000
;PCRE library recursion limit.
;Please note that if you set this value to a high number you
may consume all
;the available process stack and eventually crash PHP (due to
reaching the
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000
I uncommented the pcre.recursion_limit line and dropped the #
to 10000 (due to the ini note on "high values"--whatever is
considered high?). I also uncommented the backtrack_limit line and
left that # as is. I restarted Apache (v2.2.4) but didn't see the
extension listed with all the others listed in the book. I found
them in the ini file to:
; Local Variables:
; tab-width: 4
; End:
[PHP_GD2]
extension=php_gd2.dll
[PHP_MBSTRING]
extension=php_mbstring.dll
[PHP_MYSQL]
extension=php_mysql.dll
[PHP_MYSQLI]
extension=php_mysqli.dll
[PHP_PDO]
extension=php_pdo.dll
[PHP_PDO_MYSQL]
extension=php_pdo_mysql.dll
[PHP_XSL]
extension=php_xsl.dll
The book says that these extensions plus "session" &
"pcre" need to be enabled to work through the book.
Also, I used the installer for PHP & Apache. Edited the
config file for Apache by hand and am hoping I can do the same for
the PHP.ini file.
Any help with these two(3?) questions/problems is greatly
appreciated.
Thanks much!

Chaos7703 wrote:
> The book I'm reading now has a link to a hotfix for DW
8.0.2 on the errata
> page. My version identifies itself as v8.0. Do I need to
install this.
You need to install the Dreamweaver 8.0.2 updater before
using the 8.0.2
PHP hotfix.
> I also want to know... The book says that I need the
pcre extension enabled.
> I looked in the ini file
PCRE is enabled by default. You don't need to make any
changes in php.ini.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Is there a way to create dynamic playlists on the fly in music on smart media?

Often I'm at a friends house and we're looking through music trying to pick the next song to play as one is finishing.
It would be really great to have an dynamic playlist where you could add and subtract songs as you go and so keep the music playing as you create away and the new list runs.
I see a couple of apps offering this but they don't have good reviews. Also crossfade for this would be a nice option too.
Any plans to give a 'life update' revamp to party goers using itunes on their smart devices?
Or doesMusic have this feature and I'm just unaware of it?

Yes, there is a way. Here is the workaround. You can add notes folders directly with your iPad or iPhone.
http://keeplifesimple.weebly.com/1/post/2013/11/add-folders-to-native-notes-app- on-ios.html
Enjoy! Please pass it on, leave a comment on the page, or "like us" on Facebook if you find this information helpful.

Is there any way to create Dynamic Query??

Hi All,
Can we create a Dynamic Query object for Z-Table.
Thanks in Advance.
Regards,
Ravi Teja

Hi Jotsaroop,
We have created a Simple object to create a custom table view in the Appointment page.
Now client wants a search help pop-up for one of the attribute in the view.
By creating a simple object we are having normal query object.
But we required dynamic query for the same.
Thanks in advance for your inputs.
Regards,
Ravi

PHP MySQL Event Calendar that's DW friendly

I've tried ExtCal 2.0 and I'm not satisfied. It's loaded with
features, but I want something that I can use my own page layout
template and drop in the calendar page code. DW can't preview
ExtCal pages properly in Design view to edit. I know PHP MySQL
reasonably well but I'm looking for something to automatically
generate the month/week/day views automatically. I'm rambling here
but anyone have any suggestions?

I have been looking for a replacement for the old InterAKT
calendar extension. Adobe killed it whwn the bought InterAKT. I
need an extenstion that will help me create an event calendar for
my CMS websites. Or, I have to keep a copy of MX 2004 around just
to edit those pages.
If anyone ever finds a good calendar extension for creating
dynamic event calendars, please let us all know!!

If DW 2014.1 cc does not support database, binding, server behavior, and PHP/MySQL require it, but using Adobe Extensions Mngr IS NOT recommended, then WHAT TOOLS do we use to develop a database with DW?

I'm using windows DW 2014.1 cc. I'm following lynda.com tutorials to build a website database with PHP and MySQL. I learned I have to download Adobe Extension Mngr to active DATABASE, BINDING, SERVER BEHAVIOR panels, which I've done. BUT NOW I'VE BEEN ADVISED NOT TO USE THESE TOOLS for new development. If this is the truly the case, then WHAT TOOLS DO I USE to develop a website that has a database?

then WHAT TOOLS DO I USE to develop a website that has a database?
Besides the tools you would already need for a system using server behaviors (web server, PHP, MySQL, phpMyAdmin) the only extra tool you need is your own brain.
A lot of people are disappointed by the lack of database tools in DW now, but really it's much better this way. You can never achieve better than a rinky-dink dynamic website using server behaviors. The code Dreamweaver dynamic behaviors create is really terrible. (I'm not insulting the fine folks who wrote the feature. It's just a consequence of automated code.) You can write better, simpler, more maintainable code yourself, and over time you will improve. With server behaviors you cannot improve. you get stuck in database kindergarten.

New PHP/MySQL Connection extension doesn't show tables. What's the next step?

I'm creating Dreamweaver extensions to work with my CMS.
Since it is already connecting to the MySQL database I'd like
Dreamweaver to access the same connection without asking the
developer for the MySQL credentials again. I have created the HTML
form, the EDML for the connection script, and the JavaScript to
stitch it together, and I can successfully create connections. The
connection script looks good but when I try to expand the tables in
the database window it doesn't post a request to the server and it
just shows "None". I have a regular PHP MySQL connection on the
same site which works fine.
I feel like I'm missing a required next step which would tell
it how to enumerate tables. It would be ideal if I could plug into
the existing PHP MySQL code for this.
I would really appreciate any help and/or pointers!

"zymsys" <[email protected]> wrote in
message
news:fiuho4$ao8$[email protected]..
> I'm creating Dreamweaver extensions to work with my CMS.
Since it is
> already
> connecting to the MySQL database I'd like Dreamweaver to
access the same
> connection without asking the developer for the MySQL
credentials again.
> I
> have created the HTML form, the EDML for the connection
script, and the
> JavaScript to stitch it together, and I can successfully
create
> connections.
> The connection script looks good but when I try to
expand the tables in
> the
> database window it doesn't post a request to the server
and it just shows
> "None". I have a regular PHP MySQL connection on the
same site which
> works
> fine.
> I feel like I'm missing a required next step which would
tell it how to
> enumerate tables. It would be ideal if I could plug into
the existing PHP
> MySQL code for this.
>
> I would really appreciate any help and/or pointers!
Are you using the Database access functions?
http://livedocs.adobe.com/dreamweaver/8/apiref/07_mmd31.htm
MMDB.getTables()
http://livedocs.adobe.com/dreamweaver/8/apiref/07_mmd42.htm
MMDB.getColumns()
http://livedocs.adobe.com/dreamweaver/8/apiref/07_mmd34.htm
Or are your trying to create a new Connection Type for the
PHP_MySQL_ServerModel or a whole new servermodel alltogether?

I need help with DW, PHP & MySQL please.

Hello, I am new to website development and am trying to set up a form for collecting data on my website and have a question that I can’t find an answer to anywhere else. I was wandering if someone there would be kind enough to help? I am using Dreamweaver in CS4 and my host already has PHP & MySQL installed on the server that I can use. My question is: Do I need to download XAMP or WAMP on my computer before trying to connect my form to the server? Also, do I need to change the page I am putting the form on to .PHP extension or can I just embed the PHP form into an existing HTML page?
Most of the training tutorials I’ve read don’t start at the most basic beginning but rather expect people to already have a basic knowledge of the topics they are trying to learn. If anyone knows the best place to get answers to the most basic questions like this one or a beginners guide to working with DW, PHP & MySQL I will gladly go there rather than waste your time on questions you’ve probably already answered a bezillion times.
Thank you for the help.

Strictly speaking, you don't need XAMPP or WAMP on your local computer. But if you're serious about getting involved with PHP/MySQL, you should definitely set up a local testing environment with one or the other. It's safer and more efficient. Don't expose all your errors on a live server. You can find instructions on how to set up a testing environment here: http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php.html.
To develop with PHP, you should always use a .php file name extension. Any other choice is very rare.
There's a tutorial on building your first dynamic website with DW here: http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html.
For more in-depth help, you might want to consider grabbing hold of a copy of "The Essential Guide to Dreamweaver CS4 with CSS, Ajax, and PHP". (Yes, I wrote it, so it's a bit of shameless self-promotion, but you'll find it answers many of your questions - and probably a lot you hadn't even thought of.)

How to use spry in the dreamweaver with the php/mysql

hello,
Iam new to the spry framework
and i want to know can we use the spry in the dreamweaver
along with php / mysql code
if so please tell how to do this
thanks in advance

swetha123 wrote:
> but when i complie this page it is not showing the
preiew or any thing in the
> browser i saved this page with the extension .php if i
run the same page with
> .html then i can see the design but it is not being
executed
The reason you get nothing when you save the page with a .php
extension
is because you have display_errors turned off, so you can't
see the
error message telling you there's a syntax error. The
semicolon is
missing at the end of this line:
> echo "Hello
Swetha"
The reason it doesn't work with an .html extension is
probably because
you haven't uploaded SpryAssets/SpryTabbedPanels.js. I have
copied your
page and tested it locally with the correct JavaScript file,
and the
tabbed panels work as expected.
There are lots of other mistakes in your page. You can't use
float and
position:absolute on the same element. In at least one place,
you have
used instead of . You have also got
an closing paragraph tag
after the paragraph that contains abc.jpg.
Getting Spry or any other JavaScript library to work
correctly relies on
good, clean code. Your mixture of inline styles and font tags
is going
to make it difficult to incorporate Spry into your pages. I
suggest you
improve your HTML and CSS before bringing Spry into the mix.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Php/mysql behavours broken

I don't know what is going on but my copy of DW8 is now
unable to define php/mysql recordsets. I have a feeling that this
may be caused by a rogue extension. Only thing is it may have
occured a while back so I don't know when it started.
The problem is:
When I open an existing page which has recordsets on it I get
the following error:
Javascript error while loading recordset.htm
Unable to open script file
...\serverbehavours\php_mysql\fieldtypes.js (error 2)
I checked and the file was somehow missing so I replaced it.
Now I am being told:
The recordset script does not define the findserverbehavours
function
And I can see that the recordset is no longer there.
When I try to creat a new recordset I get:
The recordset script does not define the applyserverbehavours
function
Can anyone help
Thanks

bikeman01 wrote:
> After a bit of experimenting it seems that my problem is
caused by the DW 8.0.2 hotfix extension. Removing it put everything
right.
As long as you have installed Dreamweaver 8.0.2, you should
also enable
the hotfix extension. Your problems were almost certainly
caused by a
corrupted cache. Follow troubleshooting step 4 in the
following page:
http://www.adobe.com/go/tn_19105
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Where to go next with Dreamweaver and server-side (php/mysql) applications?

This question is mainly directed at David Powers but I appreciate any input from anyone with the same concern or question.
I've been using DW since the change from Macromedia and have developed a number of applications using built in server behaviors and sb extensions from ADDT, WebAssist, etc. I've learned to customize these behaviors to fit my needs always keeping within the "canned" code. In this way I've "learned" php.
I own most of David's books and in fact, it was because of these that I have any idea about what I'm doing and went in this direction in my "developer" career (building php/mysql applications using Dreamweaver.)
With the decision to remove server behaviors (and the other "developer" panels) from DW and with the deprecation of the mysql extension from the php landscape, I'm wondering where to go next? I fully understand this has to happen.
I'm aware of some alternatives:
Zend or some other framework - to me, this seems extremely complex
Keep several versions of DW installed
Stick to Joomla/WordPress/Drupal - let others who know what they're doing build the architecture
Actually LEARN php - wish I had time; too much work to do (I know how illogical that sounds but it's a very real situation)
I know I'm going to have to switch out all that deprecated code or better yet, rebuild the many applications which used the DW (and other) server behaviors. I'm just not sure which way to turn.

rjjacob wrote:
Since I wrote this post I concluded that there is no substitute for understanding and have started my re-education by delving further into the issue with updated PHP/MySQL books and tutorials so I can prepare for a Dreamweaver without this functionality.
Yes, I too have concluded that is the way to go as well. There really is no substitute for learning as much as you can. Whilst the DW Server Behaviours were very convenient they have not kept pace, Adobe prefering to spent their time on less important updates in my opinion. The Server Behaviours are what makes Dreamweaver the tool of choice for database integration for those who lack the knowledge. I feel the Adobe team will regret not coming up with an alternative. Anything that detracts from making the program what it is is a step in the wrong direction and for sure this is a big step in the wrong direction.
rjjacob wrote:
I have mainly used DW server behaviors in my development projects that's why I am curious about what others are doing to make the change. I'm surprised there haven't been more posts; perhaps I'm the last one to be taking action about this, or maybe no one is too worried about it yet.
I think a lot have changed their working practice but many more are burying their heads in the sand. sql_ support is a way off from being completely dropped yet.
rjjacob wrote:
Anyway, your assessment of how terrible the server behaviors are is correct. I'm finding that true after barely breaking the binding on a few books about the greater subject and looking into mysqli and PDO.
Yes, because I relied heavily on them I did not know how bad they were until I forced myself to look further afield. What you can do in a couple of lines of code the DW Server Behaviors produced quadruple or more to achieve the same.
rjjacob wrote:
But they sure were convenient!
Yes, I agree. Maybe some extention developer will come up with a set of new improved behaviours. I tell you if they do they will make a shed load of money.

Dreamweaver PHP/mySQL poll problem?

Hi,
I'm a PHP/mySQL noob who's using some of Dreamweaver's 8
(8.2) out-of-box Update server behaviors to update a database of
results for a poll. I know there's a lot of free polling apps out
there but I need to have the poll show up in another page as
opposed to being refreshed/displayed in the same page/content area.
I've successfully built the backend in phpMyAdmin and I'm
able to list the database contents and do basic updates to the poll
questions and answers. However, I've been unable to pass an
incremented result value via a Dreamweaver radio button group
(which is the normal poll format) without previous unselected
results being overwritten.
When an answer is selected the result is indeed incremented
and is displayed in the Result Listing but unfortunately it also
overwrites any preexisting data for that poll and replaces it with
zero. For example:
Question:
Answer a) 0
Answer b) 0
Answer c) 1 (this would be the value that was selected)
Answer d) 0
If c is selected again the value is stored and incremented
and the value is now 2. However, if that value is not selected,
then another value is incremented and c would be wiped. I've even
resorted to trying to use javascript to maintain the original state
but to no avail I was just previously incrementing the inline php
radio button value and/or assigning different names to each of the
radio buttons. This, of course, allows people to select multiple
values which runs contrary to the whole idea behind radio buttons,
but I thought I'd see if that worked . Anyway, when the radio group
is assigned the same value it merely increments everything.
example:
http://www.dailydatum.com/funFacts/funFactsListingSingleUpdate15.php
As you can see, i'm up to version 15 and gritting me teeth,
lol. Any help would be mighty appreciated.
Mario

hi ,
you can always try the macromedia devnet sites , they have
ongoing tutorials and discussions on all areas, including php with
dreamweaver8.
http://www.adobe.com/devnet/topics/php.html
be aware though that some of the tutorials require the use of
third party php extensions, like interakt products, which is a
shame because most of them are expensive to buy. But they are still
worth a read.
hope this is some help.
ted.

How to set up a PHP/mySQL "server" in arch?

Hi,
I know its a wide question, and i may have to go to different howtos and such, but as this distro is different from the others there might be some differences in that.
If i want to run a PHP based site in mozilla and the site is hosted in my machine, do i need to do something real strange to make it work ?
if you can post any link to some info, it wont hurt. and yes i will google anyway!

sud_crow wrote:If i want to run a PHP based site in mozilla and the site is hosted in my machine, do i need to do something real strange to make it work?
I am running Apche/PHP/MySQL on my machine and simple to setup. Few things requires to know. It can be done in different way. This is how I do including how to test the server(s). Host name is: "localhost". If anything is missing, please let me know.
INSTALL:
pacman -S apache
pacman -S php
pacman -S mysql
APACHE:
1. Add the following line in /etc/httpd/conf/httpd.conf :
LoadModule php4_module /usr/lib/apache/libphp4.so
AddModule mod_php4.c
AddType application/x-httpd-php .php
2. Add line in /etc/host :
127.0.0.1 localhost.localdomain localhost
3. Edit /etc/rc.conf :
# Networking
HOSTNAME="localhost"
4. Run in terminal (root):
# /etc/rc.d/httpd start
5. Edit /etc/httpd/conf/httpd.conf (close "AddModule mod_php4.c"):
LoadModule php4_module /usr/lib/apache/libphp4.so
# AddModule mod_php4.c
AddType application/x-httpd-php .php
6. Add line in /etc/rc.local (to start at boot):
/etc/rc.d/httpd start
Test Apache:
http://localhost/
PHP:
1. Edit /usr/etc/php.ini (open the mysql extension):
extension=mysql.so
Test PHP with a simple script:
<html>
This is a test. Say hello to Arch:

<body>
<?php
$myvar = "Hello Arch Linux";
echo $myvar;
?>
</body>
</html>
Save the file as "test.php" and copy to /home/httpd/html/
Test PHP:
http://localhost/test.php
MySQL:
1. Run in terminal:
# /etc/rc.d/mysqld start
2. Add line in /etc/rc.local (to start at boot):
/etc/rc.d/mysqld start
Test MySQL
Run in terminal (don't enter any password):
# mysql -p
Note: Change the /var/lib/mysql directory to user "mysql" if not getting MySQL to run.
For more information (if new in PHP/MySQL):
http://hotwired.lycos.com/webmonkey/99/21/index2a.html

Updating to 10.4.11 killed my PHP/MYSQL connections

Hi all - I use Dreamweaver CS3 for web development, and have been using some very simple PHP/MYSQL Select and Inserts. Everything was working fabulously up until this morning, when I updated to 10.4.11 (Macbook Pro, CoreDuo). As soon as I updated, I get a 'No Database Selected' message in Safari, Firefox and IE. I can see the database and work with it in DWeaver, just can't get it to go live in browsers.
I'm running PHP 5.2.4, MYSQL 5.1.8 and whatever version of Apache is bundled in OS X (I think it's 1.x - but can't find how to get that number!)
Just for record, I have stopped/restarted Personal Web Sharing, Personal File Sharing, OS X, MYSQL to just check whether something wasn't working there.
I'm about to close out, zap the PRAM and then come back in.
Any ideas?
Vince

Thanks - A couple of additional points. This is OS X 10.4.11, not OS X Server, so I had installed MYSQL and PHP as fresh installations. MYSQL has not changed since I installed and is running fine through direct client (Navicat).
For PHP I was running 4 and it had been running fine. When the update to OSX came through, PHP 4 didn't work - no change had been made to any configuration file that was working already. These are the httpd.conf instructions I had followed to set-up PHP 4:
+1 Launch Terminal from /Applications/Utilities.+
+2 Open the Apache configuration file and edit the UNIX shell prompt:+
+sudo pico /etc/httpd/httpd.conf+
+3 When prompted for a password, enter the Mac OS X administrator account password.+
+4 Uncomment the following lines:+
+LoadModule php4_module libexec/httpd/libphp4.so+
+AddModule mod_php4.c+
+5 Add the following lines (add these lines above: AddType application/x-tar .tgz):+
+AddType application/x-httpd-php .php+
+AddType application/x-httpd-php-source .phps+
+Note: All the commands for the pico editor display on the screen and you can start any commands with the Control key. Use the arrow keys to move around. Pico is a text editor, mostly for UNIX users to use at the UNIX command line. The pico text editor resides in /usr/bin/ directory.+
+6 Add a new index page for PHP (index.php) so that the web server will recognize it as the first page to load:+
+<IfModule mod_dir.c>+
+DirectoryIndex index.html index.php index.htm+
</IfModule>
+7 Save the httpd.conf file by pressing ^X (control & x keys). When the screen asks "Save Modified buffer?", press "Y". When prompted for "File Name to write : httpd.conf", press Return once to accept it. This will return you to the UNIX shell prompt.+
When PHP 4 stopped working, I took the decision to upgrade to 5 and then fix the breakdown (by now, I was convinced it was an Apache change (nothing in config had changed at all). So, upgraded to PHP 5 and, to do so, had to reverse the directions above. Since then, I've tried reenabling the above, replacing with PHP5 wherever PHP4 appears, all to no avail (in fact, it just froze the Personal Web Sharing that turns Apache on/off).
Right now, running the phpinfo check detailed above tells me the PHP 5 is successfully installed and running. The text from the test copied here:
+System Darwin Vincet-MacBook-Pro.local 8.11.1 Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386 i386+
+_Build Date_ Aug 31 2007 23:38:11+
+_Configure Command_ './configure' '--prefix=/usr/local/php5' '--with-apxs' '--with-config-file-scan-dir=/usr/local/php5/php.d' '--with-iconv' '--with-openssl=/usr' '--with-zlib=/usr' '--with-gd' '--with-zlib-dir=/usr' '--with-ldap' '--with-xmlrpc' '--with-iconv-dir=/usr' '--with-snmp=/usr' '--enable-exif' '--enable-wddx' '--enable-soap' '--enable-sqlite-utf8' '--enable-ftp' '--enable-sockets' '--enable-dbx' '--enable-dbase' '--enable-mbstring' '--enable-calendar' '--enable-bcmath' '--with-bz2=/usr' '--enable-fastcgi' '--enable-cgi' '--enable-memory-limit' '--enable-zip' '--enable-pcntl' '--enable-shmop' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--with-curl=shared,/usr/local/php5' '--with-mysql=shared,/usr/local/php5' '--with-mysqli=shared,/usr/local/php5/bin/mysql_config' '--with-pdo-mysql=shared,/usr/local/php5' '--with-libxml-dir=shared,/usr/local/php5' '--with-xsl=shared,/usr/local/php5' '--with-pdflib=shared,/usr/local/php5' '--with-imap=../imap-2004g' '--with-kerberos=/usr' '--with-imap-ssl=/usr' '--with-jpeg-dir=/usr/local/php5' '--with-png-dir=/usr/local/php5' '--enable-gd-native-ttf' '--with-freetype-dir=/usr/local/php5' '--with-iodbc=shared,/usr' '--with-pgsql=shared,/usr/local/php5' '--with-pdo-pgsql=shared,/usr/local/php5' '--with-t1lib=/usr/local/php5' '--with-gettext=shared,/usr/local/php5' '--with-ming=shared,/usr/local/php5' '--with-mcrypt=shared,/usr/local/php5' '--with-mhash=shared,/usr/local/php5' '--with-mssql=shared,/usr/local/php5' '--with-fbsql=shared,/Users/liyanage/svn/entropy/universalbuild/src/FBDeveloper Libraries/Library/FrontBase' '--with-json=shared' '--enable-memcache' '--enable-openbase_module'+
+_Server AP_I Apache+
+_Virtual Directory Suppor_t disabled+
+_Configuration File (php.ini) Path_ /usr/local/php5/lib+
+_Loaded Configuration File_ /usr/local/php5/lib/php.ini+
+_Scan this dir for additional .ini files_ /usr/local/php5/php.d+
+_additional .ini files parsed_ /usr/local/php5/php.d/10-extension_dir.ini, /usr/local/php5/php.d/50-extension-curl.ini, /usr/local/php5/php.d/50-extension-fbsql.ini, /usr/local/php5/php.d/50-extension-gettext.ini, /usr/local/php5/php.d/50-extension-json.ini, /usr/local/php5/php.d/50-extension-mcrypt.ini, /usr/local/php5/php.d/50-extension-mhash.ini, /usr/local/php5/php.d/50-extension-ming.ini, /usr/local/php5/php.d/50-extension-mssql.ini, /usr/local/php5/php.d/50-extension-mysql.ini, /usr/local/php5/php.d/50-extension-mysqli.ini, /usr/local/php5/php.d/50-extension-odbc.ini, /usr/local/php5/php.d/50-extension-pdf.ini, /usr/local/php5/php.d/50-extension-pdo_mysql.ini, /usr/local/php5/php.d/50-extension-pdo_pgsql.ini, /usr/local/php5/php.d/50-extension-pgsql.ini, /usr/local/php5/php.d/50-extension-xsl.ini+
+_PHP API_ 20041225+
+P_HP Extension_ 20060613+
+_Zend Extension_ 220060519+
+_Debug Build_ no+
+_Thread Safety_ disabled+
+Zend Memory Manager enabled+
+_IPv6 Support_ enabled+
+_Registered PHP Streams_ zip, php, file, data, http, ftp, compress.bzip2, compress.zlib, https, ftps+
+_Registered Stream Socket Transports_ tcp, udp, unix, udg, ssl, sslv3, sslv2, tls+
+_Registered Stream Filters_ string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, convert.iconv.*, bzip2.*, zlib.*+
I don't know if any of this helps, but it's what I find. From my online troubleshooting and reading, I believe all of the above looks right and that things should work. So, I'm still left with an informed gut decision that something in the set-up of Apache changed (location in file structure, configuration file, etc.) Could it be looking at a second copy of httpd.conf somewhere else? That would seem to make sense - however I haven't managed to turn up how to assess which version of Apache is loaded (I think 1.3) or where it's located.
If anyone can confirm what PHP5 code should be included in httpd.conf given the above, that would be a great next step.
Thanks for all your assistance!
Vince

[DW + PHP + MySQL] is there an extension to create dynamic charts?

Similar Messages

Maybe you are looking for