DW repeat region start from the second record

Hi,
iam a beginner in DW can anyone help me in my news page, iam using repaet region for the archive
How could I start from the second record instead of the first
using php mySQL
Thanks in advance.

The simplest way I can think of depends on the recordset. If your querying the entire recordset and each record has incrementing ID numbers, then add a filer to return records greater than 1, if one is the first record. If you've already applied another filer though, we'll have to get a little more creative to find the best solution.

Similar Messages

Does re-running a MDM Initial Load restart from the first record?

Is there a way to restart an Initial load? I was running a new initial materials load in my ECC system for MDM (MDM_CLNT_EXTR) which was running a very long time (5 days). The background job hit a bad piece of data and crashed.
My question is: when I re-run my initial load job, will it start over from the first record, or will it pick up from the last material/IDOC and resume processing? I would prefer not to re-process all 1.7M materials since the job was very near the end before it crashed.
Thanks,
Denis

Hello,
There are two modes which are available in Client Extractor, Initial and Delta.
If you select Initial it will start from the first record, that you mention in the selection Criteria.
In Delta mode, any new records created will be sent to MDM.
For your issue, in the initial mode, select the Material Number from and to, which have not been updated in MDM.
This is will ensure, that only the records that have not been sent.
Regards,
Abhishek

Repeating Header from the Second Page

Hi All,
i want to Repeat the Header from the Second page but it is not repeat. i tried in the following ways
1.I have given "Repeat as a header row" in the table properties
2. I Tried with Start Body and End Body(here i am using a this from first page also)
can any please help me on this?
regards
boopat

I think that you may find that the stuff in the header is set to print on First Page rather than All Pages. Try looking at the items and change.
Dave

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

UWL: The request cannot be started from the Business Workplace?

Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
Maahir

BY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION     LeaveRequestApprover
DYNPARAM     wi_id=${item.externalId}
PACKAGE     sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application.

I want to create a playlist on an old iPod Nano (I think it's from the second generation), but the computer it was originally linked to via iTunes died years ago. How can I make a playlist out of existing songs on the iPod?

Hello there,
I have an old iPod nano which I think is from the second generation (model number A1199 if that helps) with software at the latest version it can accept, 1.1.3. I wish to make a playlist out of the songs currently on the iPod, but I can't see any easy way to do that from the iPod itself. The next logical thought is to do it through iTunes, but the iTunes that was originally synced to the iPod died several years ago now, so I can't access that to make a playlist through (it's a very old iPod). I do have iTunes currently on this computer, but that's synced with my iPhone and stores different songs which I don't want to be mixed with those from the old iPod (due to the mostly nostalgic nature of the iPod songs). Is there any way I can either create a new playlist from the iPod itself, or through iTunes without having to sync? Also note that most of the songs on the old iPod were uploaded to iTunes from CDs and so aren't connected with any iTunes Login.
Thanks for any help you can give. Also, I sorta need to create this playlist ASAP so any advice you could give would be much appreciated
~Imamadmad

The old iTunes library was lost with the old PC. However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Please advise how to come back to stop position of a talk after listening to a song. always the talk start from the beggining

Hi,
I listen to recorded talks which are over an hour long, Because the talk are too long I have to stop and carry out other work at home. If I happened to listen to a song and later go back to listen to the talk, It starts from the beggining not where I stop earlier. Can you please tel me how to save the talk where I stop so that I can come to the same place later,
thank you
mahilal

There is no current way to do what you are asking, because your talks are played as if they were songs. If you could somehow make the recorded talks considered podcasts they would function like you want. Unfortunately, there is no current way to make, what iTunes considers a song, a podcast at this time.

Scrolling with mouse wheel in column browser starts from the start of the list

Hi, I'm wondering if anyone else has been encountering this problem with iTunes.
Ever since updating to 10.5, whenever I use the mouse wheel to scroll in the column browser, it starts from the start of the list, regardless of which artist or album is highlighted.
For instance, I press the M key to jump to artists starting with M, then use the mouse wheel to scroll down the list, in iTunes 10.5 it jumps me back to the As.
The strange thing is that if I then use the mouse wheel to scroll down to the Cs, then jump down the list via a key press, mouse wheel scrolling will start me back to where I last scrolled (C).
How can I fix this problem?
I'm using iTunes 10.5.0.142 on Windows 7 Home Premium.

I can confirm the behaviour. It would seem iTunes is keeping a separate record of the position in the list for use by the scroll wheel, and then snapping to that before scrolling up or down a screenful. The same random jumps happen if you use the keyboard Page Up/Page Down commands and then use the mouse wheel.
I shall file a bug report.
tt2

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please.

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please. ?

Are you away from your home country?
Settings > General > International > Region Format > set to correct location?
Settings > Phone > Dial Assist > ON

I am wondering if it will be a good move to install fusion 5 on my iMac. I am wondering since I did the split to run windows 7 if this means that I will have to erase all and start from the beginning

I am wondering if it will be a good move to install fusion 5 on my iMac. I am wondering since I did the split to run windows 7 if this means that I will have to erase all and start from the beginning

From what you say, I understand that you already installed Windows 7 on a second volume. Is this correct?
In that case, it doesn't make sense to use VMware Fusion unless you want to run Windows and OS X at the same time. If you do that, you will keep all your data.
If you haven't installed Windows 7 and you want to install it in VMware Fusion, you will be installing it in a virtual machine, so you won't lose anything.
I recommend you to have a look at VirtualBox first > http://www.virtualbox.org It's free and it's sufficient for most of users

AudioInputStream won't start from the beginning

I'm not sure if this is normal or not, but here's a weird the situation. I have a number of audio files that I play together. Nothing complicated.
    public void playAudio() {
        try{
            File soundFile_1 = new File("SoundFile1.wav");
            File soundFile_2 = new File("SoundFile2.wav");
            File soundFile_3 = new File("SoundFile3.wav");
            audioInputStream_1 = AudioSystem.getAudioInputStream(soundFile_1);
            audioInputStream_2 = AudioSystem.getAudioInputStream(soundFile_2);
            audioInputStream_3 = AudioSystem.getAudioInputStream(soundFile_3);
            audioFormat_1 = audioInputStream_1.getFormat();
            audioFormat_2 = audioInputStream_2.getFormat();
            audioFormat_3 = audioInputStream_3.getFormat();
            DataLine.Info dataLineInfo_1 = new DataLine.Info(SourceDataLine.class,audioFormat_1);
            DataLine.Info dataLineInfo_2 = new DataLine.Info(SourceDataLine.class,audioFormat_2);
            DataLine.Info dataLineInfo_3 = new DataLine.Info(SourceDataLine.class,audioFormat_3);
            sourceDataLine_1 = (SourceDataLine) AudioSystem.getLine(dataLineInfo_1);
            sourceDataLine_2 = (SourceDataLine) AudioSystem.getLine(dataLineInfo_2);
            sourceDataLine_3 = (SourceDataLine) AudioSystem.getLine(dataLineInfo_3);
            new PlayThread().start();
        } catch (Exception e) {
            e.printStackTrace();
            System.exit(0);
    class PlayThread extends Thread{
        byte tempBuffer_1[] = new byte[100000];
        byte tempBuffer_2[] = new byte[100000];
        byte tempBuffer_3[] = new byte[100000];
        @Override
        public void run(){
            try{
                sourceDataLine_1.open(audioFormat_1);
                sourceDataLine_2.open(audioFormat_2);
                sourceDataLine_3.open(audioFormat_3);
                sourceDataLine_1.start();
                sourceDataLine_2.start();
                sourceDataLine_3.start();
                int nBytesRead;
                while(((nBytesRead = audioInputStream_1.read(tempBuffer_1,0,tempBuffer_1.length)) != -1) &&
                      ((nBytesRead = audioInputStream_2.read(tempBuffer_2,0,tempBuffer_2.length)) != -1) &&
                      ((nBytesRead = audioInputStream_3.read(tempBuffer_3,0,tempBuffer_3.length)) != -1) &&
                      (stopPlayback == false)) {
                    if(nBytesRead > 0){
                        sourceDataLine_1.write(tempBuffer_1, 0, nBytesRead);
                        sourceDataLine_2.write(tempBuffer_2, 0, nBytesRead);
                        sourceDataLine_3.write(tempBuffer_3, 0, nBytesRead);
                sourceDataLine_1.drain();
                sourceDataLine_2.drain();
                sourceDataLine_3.drain();
                sourceDataLine_1.close();
                sourceDataLine_2.close();
                sourceDataLine_3.close();
                stopPlayback = false;
            } catch (Exception e) {
                e.printStackTrace();
                System.exit(0);
    }I also have a method that combines the three audio files into one. I usually call this method after having played the files for a short time.
    public void saveAudio() {
        saveList.add(audioInputStream_1);
        saveList.add(audioInputStream_2);
        saveList.add(audioInputStream_3);
        saveMixAIS = new MixingFloatAudioInputStream(audioFormat_1, saveList);
        File saveFile = new File("SaveMix.wav");
        try {
            AudioSystem.write(saveMixAIS, AudioFileFormat.Type.WAVE, saveFile);
     } catch (IOException e) {
            e.printStackTrace();
} Interesting enough, this code doesn't seem to combine the three audio files properly. What seems to happen is that the combined file starts at the location where I stopped playing. In order to get the files to start from the very beginning, I need to re-initialize the AudioInputStream.
    public void saveAudio() {
        try{
            File soundFile_1 = new File("SoundFile1.wav");
            File soundFile_2 = new File("SoundFile2.wav");
            File soundFile_3 = new File("SoundFile3.wav");
            audioInputStream_1 = AudioSystem.getAudioInputStream(soundFile_1);
            audioInputStream_2 = AudioSystem.getAudioInputStream(soundFile_2);
            audioInputStream_3 = AudioSystem.getAudioInputStream(soundFile_3);
        } catch (Exception e) {
                e.printStackTrace();
                System.exit(0);
        saveList.add(audioInputStream_1);
        saveList.add(audioInputStream_2);
        saveList.add(audioInputStream_3);
        saveMixAIS = new MixingFloatAudioInputStream(audioFormat_1, saveList);
        File saveFile = new File("SaveMix.wav");
        try {
            AudioSystem.write(saveMixAIS, AudioFileFormat.Type.WAVE, saveFile);
     } catch (IOException e) {
            e.printStackTrace();
} Is this normal?

mohogany wrote:
That definitely makes sense.
I was under the impression that the AudioInputStream never loses the data it has read and that the AudioSystem.write method always starts from the beginning of this AudioInputStream. I need to stop treating the AudioInputStream like an array and instead treat it more like fresh water.Definately.
AudioInputStream doesn't actually have anything in it...it's actually just a wrapper. Whenever you call read on it, it just reads whatever it's wrapping around, and returns the result. This is why it can contain both live data being recorded or file data or a network stream or...
In this case, it is reading from a BinaryFile. Everytime you call read, it increments the file position... and it doesn't reset the file position when you call AudioSystem.write...

Config Tool doesn't start from the application list

Hi all,
I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
I need to configure the database and deploy to the application server.
The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
If you have run into this, please let me know what am I missing?
Thanks

Hi
First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
If still you have issue please clarify your problem then probably I will be able to answer your query.
Regards,
Amit

Cant connect at BAM console from the second server

Hi
I have BAM 11.1.1.3.3, running with 2 managed servers (cluster). I created a user on WLS console with DefaultAuthenticator method.
I associated this user as Report architect at BAM Grid Control.
I can connect at OracleBAM apps from one server, but from the second server I get error:
BAM-00223: service oracle.bam.adc.common.core.IDataStore
What could it be??
TX

Did you configure the BAM cluster in active-passive mode. Since the BAM server does not support active active configuration.
By looking at the error it looks like the BAM server is trying to start on the other node. Please follow the SOA HA documentation to configure BAM active passive.
Thx
Ritesh

I have two email accounts that are set up on the same iPad. I cannot seem to see, read or send email from the second account

I just set up a second email account on the same iPad but cannot seem to see, read or send email from the second account.

I'm using Windows 8 (not 8.1) and whatever the latest Thunderbird version is. They're both IMAP accounts. I was using Windows Live, but I couldn't get that to work, so I switched to TB. It works JUST fine for the one account, but not the other! They're identical except for the "handle". Both off my local ISP, set them up at the same time.

I want to get the values from the second hiphen only

Hey Guys,
I have one column and the data like this
col1 = 'AI463-901-001'
Now,
I want to get the values from the second hiphen only(any no. of values).
Please can any one help me on this .
Thanks in advance!
Regards,
-LK

you have a mistake
you result is -001
this is right
select substr('AI463-901-001',instr('AI463-901-001','-',1,2)+1) from dual;
-- @user11928732 - if you are using Oracle Database 11g, ttry this please
with data as
(select 'AI463-901-001'from dual)
select substr(str,instr(str,'-',1,2)+1) from data;
select substr(<YOUR COLUMN>,instr(<YOUR COLUMN>,'-',1,2)+1) from <YOUR TABLE>;result is : 001
Edited by: Mahir M. Quluzade on May 3, 2011 5:37 PM

DW repeat region start from the second record

Similar Messages

Maybe you are looking for