DW reporting error line 9 and 10

Hi everything this site www.geekstotherescue.com.au was all
good to go until I input the keywords client sent me. then
Dreamweaver reported error (underlined lines 9 and 10 in red) I can
not figure out what caused this error. i do not have access to IE6
can someone check the site in IE 6 and let me know if it looks ok
and how I can fix the error?
thanks
Shontelle

> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6.
So - there's your answer, then. Open the CSS file and see
what is redlined
there.
> I have heard that kewyords are not very effective
anymore but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
It's really up to you, but I do the "not to bother" part.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"shonts" <[email protected]> wrote in
message
news:fcplll$o8q$[email protected]..
> Hi thanks for ypur replies.
> 1. Peter: i should have checked validation before
positng here. I will
> fix
> the errors now. thanks
> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6. I have heard that kewyords are not very
effective anymore
> but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
>
> regards,
>
> Shontelle
>

Similar Messages

Report Errors REP-1051 and REP-1070 when saving

I just created a new report. I'm now getting errors REP-1051 and REP-1070 when I attempt to save the .rdf to my local hard drive (or anywhere else for that matter). Permissions where I try to save it are OK, in fact if I remove the SQL and insert "select * from dual", it saves nicely. Is there a query size limit of which I'm unaware? The SQL runs corrrectly, compiles correctly, etc. I just can't seem to save my work. Thank you in advance.

REP-1051 and REP-1070 What are the messages for these codes?
Which version and OS are you using?
How are you calling your report?

Report error : REP-771: and ORA-12162:

Hi , i run report and it terminated with error message
The report terminated with error:
REP-771: A fatal PL/SQL error occurred in program unit afterpform.
ORA-12162: TNS:net service name is incorrectly specified
does anyone know how to fix this issue
thx

ORA-12162: TNS:net service name is incorrectly specified
$ oerr ora 12162
12162, 00000, "TNS:net service name is incorrectly specified"
// *Cause: The connect descriptor corresponding to the net service name in
// TNSNAMES.ORA or in the directory server (Oracle Internet Directory) is
// incorrectly specified.
// *Action: If using local naming make sure there are no syntax errors in
// the corresponding connect descriptor in the TNSNAMES.ORA file. If using
// directory naming check the information provided through the administration
// used for directory naming.
$How do you connect to the database ? Did you try connecting from Sql*Plus using the same connection string ? Result ?

Lightroom 5.5 Camera RAW 8.5 importing Canon G16 RAW (and jpg) to dng results in blank grey slides in Library. Works individually in Development but reverts to blank in Library. Colour management is set on sRGB. Also reports error on backup and fails to b

All the other pix in the library are fine. I'd really appreciate a solution.

I tried replying by e-mail and it hasn't come through, so I'll reply using the web forums, and there may eventually be two replies with similar suggestions...
The second part of your issue got truncated, so you might want to include what else you said in a reply.
Regarding the gray thumbnails, this is usually a bad display profile, but can also be a corrupted previews cache.
dj_paige already posted a link to a page about changing the monitor profile to sRGB, although perhaps you’ve done that.
The other thing that could be wrong is your previews cache may be corrupted. The way to fix that is to delete the previews cache and let LR start a new one. If you don’t know where your catalog is, look in the LR Preferences / Catalog Settings and the path is indicated on one of the panels.
Using Explorer or Finder, go to the folder that has your catalog in it and your previews cache will be a folder called:
catalogname Previews.lrdata
You should exit LR and then rename that folder to have a different name (using Explorer/Finder) and then restart LR. You could delete it, too, but if renaming doesn't fix the problem then you can just rename it back and have your old previews, again.
It is possible that there is some other problem that would be more obvious if we could read the rest of your message that was truncated.

ERROR: Your password and confirmation password do not match. [******] - has been ignored.

In IE8m 7, 6, this error occurs. Instead of allowing the registrant to correct the mis-matched password, BC submits the form and places this in the submission report: ERROR: Your password and confirmation password do not match. [******] - has been ignored.
The user doesn't get logged in (obviously), however BC creates a record for this user, but without a password.
Has anyone else received this error?
The process happens like this, user completes form, which includes password|confirm password in which the confirm password is mistyped, when "submit" is pressed, the modal window appears indicating a mismatched password. The user clicks "okay" and then the page redirects to the submission page (or to a login screen if the form is set to redirect to a specific page).
This occured during the test phase and has been replicated!

Can you please insert that form onto a blank page with no template around it and test it? There seems to be a problem in javascript validation.
It's this line:
if(why != ""){alert(why);return false;}
So, when you click submit, the JS pops the alert if "why" varaible is not an empty string and then returns false, which means the form should not get submitted. However, on your form the browser goes on to this line and submits the form:
if(submitcount50254 == 0){submitcount50254++;theForm.submit();return false;}
I can't exactly pinpoint the problem, but it's in that code or some code interfering with that code.
Cheers,
-mario

Missing Line Items and '?' Symbols in some Reports

I have upgraded the patch level of my production server and patch level
list is given below
SAP_BASIS 640 0022 SAPKB64022
SAP_ABA 640 0022 SAPKA64022
ST-PI 003C_640 0001 SAPKITLPS1
PI_BASIS 2006_1_6400006 SAPKIPYL06
SAP_BW 350 0021 SAPKW35021
SAP_HR 500 0017 SAPKE50017
SAP_APPL 500 0019 SAPKH50019
PI 2004_1_5000004 SAPKIPZI64
problem is that whenever I run SAP FICO standard reports FL3N, FBL5N,
KB01, F.08 etc it generates the report correctly but when i am taking
print out of these reports it misses some line items and total value as
well screen shots are attached for information.
my second problem is that there are some garbage entries with
symbol '?' in SAP Menu and toolbars of some Reports. Screen shot is
also attached for your information.
i am facing lots of problem in executing my daily operations due to
these errors.
regards,
Majid Khan

Dear Subramanian,
I am facing the same problem in Development and Quality Assurance Server
Regards,
Majid Khan

Laserjet M1536dnf fax error report - result-Line Surge(2)

We use HP LaserJet MFP as stand alone fax machines. Earlier this week, the one that had been in service for 6 years would not receive nor send a fax. All other functions worked well. The replacement the M1536dnf, will send and receive faxes but after a few attempts. The two errors that have been coming up are Line Surge(2) and Comm Error 232. When I dial our fax number with my phone I can hear static on the line at times.
After replacing all the patch cables that are connected to this line (fax and postage machine are on this line), nothing has changed.
I am thinking the telco has made changes which is now giving us these errors.
Any other ideas what to check for or what the Line Surge error may mean?

Hi @benamen,
Welcome to the HP Forums!
I see that your Laserjet M1536dnf will not send and receive faxes. I am sorry to hear this, but I am happy to help!
I would recommend to go through these guides, to verify everything is connected properly:
Cannot Send or Receive Faxes.
Troubleshooting Fax Issues.
According to this guide, Interpreting Error Codes in Fax Communication Error or Fax History Reports.
Error Code: 232, 233, 234, 235 ECM, 236 ECM, 237
Definitions
A communication failure occurred between the two machines.
The user at the remote machine might have pressed the Stop key.
The call waiting service can cause this error. The click, heard for an incoming call, is actually a momentary disconnect of the line. Do not use call waiting on a line with a fax machine.
The power at the remote machine was interrupted, or deliberately turned off causing the fax session to be interrupted.
Solutions
If the error persists, and error correction is in use for the fax session, disable ECM. Fax quality might be degraded.
Set the host machine to receive at a slower transmission speed.
Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Other reasons can include power brownouts and other power-related problems.
After reading this information, and verifying the connection is setup properly, I would definitely consider contacting your phone provider.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Error while editing PO - deleting service line item and creating material line item.

In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
Back end error: Enter G/L account
Back end error: LIne item still contains faulty items.
This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
I need to know the reason for this issue and how it can be solved?

PO Values (Inc Tax):
Item 1: INR 228 L
Item 2: INR 27.83 L   (Payment also done in 2008)
GR for Item 1: INR 207.46 L
Remaining Comm = INR 21.01 L
Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
User changing for remaining qty.
Budget Report values:
Previous Years: Budget, Actual & Assigned = 304.85 L
                            Available = 0      (Carry Forward done for Budget & Commitments)
2011:                   Budget = 75.15 L
                            Actual = 53.86 L
                            Comm = 21.01 L   (Same as Remaining Commitment)
                            Avai = 0.28 L
Hope this will help.

Oracle SQL Developer and Errors (Line Number Incorrect)

First, I wanted to state that Oracle SQL Developer 2 is a standout job.
I wanted to report, though, that when Oracle SQL Developer 2 can't compile a block of code or a simple SQL statement has invalid syntax, it does not have an option to accurately go to the line of code in question. GOING TO the erroneous line of code doesn't need to be a feature, but often times the line no. REPORTED by Oracle SQL Developer is incorrect by 50+ lines.
Is this something I could fix on my end? I have five other developers griping about this.
Thank you!

I don't know if this is the situation you are talking about, but line numbers for errors in SQL in a SQL Worksheet are not line numbers within the statement but rather line numbers in the worksheet. For example, with the following SQL in the worksheet:
select * from dual;
select * from dual;
select * from dual;
select from dual;Running the "select from dual;" statement (as either statement based on cursor position, selected statement or as script), the error is reported on Line 4, Column 7. As I show line numbers (Tools | Preferences | Code Editor | Line Gutter | Show Line Numbers), this makes sense. Without line numbers showing or having the option to go to the error and with more realistic examples with SQL statements scrolling off the page, I can see that the line number in the errors wouldn't be helpful.
I think -K- is talking about the PL/SQL code editors not reporting the correct line number based on the error line not counting the "create or replace" line at the start of a package (and more for triggers).
theFurryOne

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

General Ledger report with Op Bal , Trans Line Items and Closing Balance

Hi Experts,
My clients needs a General Ledger report which should show Opening balance and all transactions line items with closing figure in a single report for a fiscal year in the given date range wise. Can I get a report in standard sap. Waiting for your reply.
Thanks in Advance,
Arabinda Parida

Hi Parida,
There is no such report in SAP. Basically all standard report gives line items not with opening and closing balances. Anyway check mentioned transaction which may help to you.
S_ALR_87012309....It is cash journal report. Anyway you can enter GL account get opening and closing balances with all relavent transactions.
Regards
Suma

How to use AT LINE-SELECTION and AT USER-COMMAND in one report????

Dear all,
I have a problem in reports I want to use AT USER-COMMAND.and AT LINE-SELECTION.both in the one report.
But as soon as I use SET PF-STATUS my AT LINE-SELECTION event stop workingand only AT USER-COMMAND is working.
How can I use both of them in one report for your reference I am giving my test program below.
REPORT ZTEST111 .
SET PF-STATUS '100'.
DO 10 TIMES.
WRITE:/ SY-INDEX.
HIDE SY-INDEX.
ENDDO.
START-OF-SELECTION.
AT LINE-SELECTION.
MESSAGE I002(SY) WITH SY-INDEX.
AT USER-COMMAND.
MESSAGE I002(SY) WITH 'USER COMMAND'.
END-OF-SELECTION.
Thanks in advance
Sachin Gautam

hi
Syntax
AT USER-COMMAND.
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment if, during the display of a screen list, a function with a self-defined function code was chosen.
Note
Self-defined function codes are all those that include character combinations, except for the following:
The function codes PICK and PF## ("##" stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PF##.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
Table 1
Function code Function
%CTX Call a context menu
%EX Exit
%PC Save to file
%PRI Print
%SC Search for ...
%SC+ Find next
%SL Search in office
%ST Save to report tree
Table 2
Function code Function
BACK Back
P- Scroll to previous page
P-- Scroll to first page
P+ Scroll to next page
P++ Scroll to last page
PFILE name Store list lines in a text file named abap.lst in standard character representation in the standard directory of the application server. If a name is entered using name, this is converted to lowercase letters and used as the file name.
PL- Scroll to first line of the page
PL-n Scroll n lines back
PL+ Scroll to last line of the page
PL+n Scroll n lines up
PNOP No effect
PP- Scroll back one page
PP-n Scroll n pages back
PP+ Scroll one page forward
PP+n Scroll n pages forwad
PPn Scroll to beginning of page n
PRI, PRINT Print
PS-- Scroll to first column
PS++ Scroll to last column
PS- Scroll one column to the left
PS-n Scroll n columns to the left
PS+ Scroll one column to the right
PS+n Scroll n columns to the right
PSn Scroll to column n
PZn Scroll to line n
RW Cancel

Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This hass been going on for several months, and Apple has never contacted

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

Error opening a Manage Report template with Formulas and Summation

Hi Expert,
My j2ee web application is setup is such a way that when there is NO connectivity to the Crystal Report Server XI, it will use the Crystal Report for Eclipse functionality and opening report templates located in the relative path - This works fine.
But when there is a connectivity to the CMS Server, I have this error when opening a manage report in Crystal Report Server XI that contains formulas and summations. But for other reports like chart and listings no problem.
This code triggers the error:
ReportClientDocument clientDoc = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
I found out there's a conflict between CR libraries for Eclipse and libraries for RAS Enterprise Server XI.
How can I solve this issue so that I can support the two scenarios - with or without CMS connectivity, I can still view reports.
Error Stack Trace:
com.crystaldecisions.sdk.occa.managedreports.ras.internal.a: Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed detail:Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. The exception originally thrown was com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
Hoping for your answers.
Regards,
Rulix Batistil

You must isolate the CR4E and RAS SDK jars using separate classloaders - simplest is have separate apps, if rolling your own class loaders is out of project scope.
They do not work together.
Sincerely,
Ted Ueda

DW reporting error line 9 and 10

Similar Messages

Maybe you are looking for