DW's FTP not connecting.

For about the past month, my Dreamweaver cannot FTP to any of my known sites.
I've been using DW for more than 10 years and have worked on multiple sites. I've been using my current install of CS6 DW for more than a year and have not changed any config. elements in the last 6 months.
Having followed Adobe's support forum and FAQs, I've tried connecting to Adobe's test FTP server. DW will not connect to this machine.
I can connect to my work's site using FileZilla.
I cannot connect to Adobe's test FTP site using FileZilla.
I've had my hosting company confirm my login user/pw are correct and that they can FTP in. I've even re-copied this info into both DW and Filezilla to confirm I've got this correct.
In DW, I'm using port 21, passive FTP and FTP performance optimization. I've even tried combos of turning these and other toggles on/off. Still no connect.
I'd really like to be able to have DW sync my files as I'm about to launch a major site feature. Otherwise, I could use FileZilla to push files but is there anyway to do a file syncronize with FileZilla or other program?
Thanks

There really was nothing that told me "hey this DW issue is a router problem" I actually stumbled upon the solution completely by accident while troubleshooting an entirely different program.
Replacing the router was the only available fix.
However, had I brought my computer to another network, the issue would not have presented itself. That's why I suggest that at a troubleshooting step. If you were able to connect through another network with the same machine, the problem would be outside the program itself and it would help you focus your troubleshooting efforts.

Similar Messages

FTP not connecting in foriegn country

I am trying to connect to my remote server with FTP, but none of my sites are connecting. I am using a wireless connection which is connecting for all other purposes. I usually live in the US but am now in Brazil, which I think might be making the difference but Im not sure. Ive tried changing all the settings as suggested by others but nothing is working. Someone help!

With a HTTP connection the server has the ability to identify the ip address (and thus, the country) the connection is coming from. I am pretty sure this is also true with a FTP connection.
I have used SFTP from Australia and Germany to my server in the US with no issues, but it seems possible that some server hosts might block foriegn IP addresses as a security precaution. If that's what your host is doing, they should be able to add your ip connection to their "white" list.
I'd be curious to hear what your web hosting company has to say.

Ftp not connecting

I know how to connect via ftp so that what I call a virtual folder or mount point appears on my desktop. The problem is that for this particular site, it does not work.
I'm running 10.4.9 Client. The ftp site does not allow anonymous ftp. In the "Connect to Server" dialog box, I have tried a few different syntaxes. I've tried:
ftp://host.name
ftp://[email protected]
ftp://user:[email protected]
I can connect to the host via ftp from the terminal window easily. The syntax that seems to get me the closest is the second one. The window sits there trying to connect for a rather long time. I'm guessing a minute. I finally get a diaglog box asking for a password. I type in my password and it grinds away for another minute or so and then fails.
The third syntax has the same symptoms.
I did a tcpdump and looked at the packets. I could see [email protected] being passed as the password in the second case. So, the software is just guessing at the password instead of asking. I did not do the tcpdump while using the third syntax -- I assumed it would be the same since the visual feedback is the same.
My questions are:
1) Is there a nice way to look at the tcpdump traffic and understand it more fully. I'm doing tcpdump -w <file> and then tcpdump -A -r <file> to look at it.
2) Are there any places where I can configure this for particular hosts? Is there any chance that it uses .netrc for example? (I haven't tried it.)
Thank you
Perry

Hi-
Try changing your client to use "Passive".
I'm not sure what you mean but from the command line ftp (which has always worked), I did "passive" which disabled passive and was able to connect.
If you hit that ftp site with Safari
ftp://ftp.[host_name.com]
Do you get prompted for password?
No, I get the same thing. If I put no user or password, it fails immediately. If I put the user or if I put the user and password, it takes two minutes to prompt me for a password. After I give it a password it takes another minute to fail.
Have you talked to admins at the ftp host site?
What would I talk to them about? The don't know squat about Mac's if that is what you are asking. Again, remember, I can ftp fine from the command line ftp.
Clear keychainAccess entry for this server.
Repair Permissions.
Didn't try that but I don't think thats the problem.
Any firewall/security software running on this mac,
besides Mac Firewall?
No. not on the Mac. The server is behind a firewall but, like I said, the command line based ftp works fine. So why doesn't the safari or the "server" based ftp work?

Dreamweaver cs3 FTP Fault - Not connecting anymore

Hi,
I hope someone may know the cause of this wierd problem
My dreamweaver cs3 has just stopped connecting to server for
any of my sites
(i got over 100 sites and tried quite a few).
My other ftp program external to cwcs3 is fine and continues
to work. This
using the same connection settings as dwcs3 site profiles.
Nothing has
changed on my dwcs3 profiles but yestarday I had the daylight
saving problem
(and last year) where i had to delete the cache file as per
adobe tech doc.
DW no longer crashing but i think this ftp not connecting is
only since
yesterday.
I have also installed the various windows updates that came
out recently.
The other machines in the office continue to work fine. All
machines import
the same saved profiles, but if i remove the site profile and
reimport it
still dosent connect, but repeating this on another machine
works without a
problem.
All machines in this floor have Vista Business/ CS3 web suite
connecting to
a windows 2003 standard ed server running iis and
iis/microsoft ftp server.
Same result with windows firewall disabled. Only other
security app is NOD
anti-virus, again all machines are the same.
All i get is an error telling me to try passive etc, but i
know this isnt
the fault as the other machines with the same settings are
fine..
here is a copy of the ftp log after trying to connect,
selecting a file, and
selecting put.
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> MKD MM_CASETEST4291
< 257 "MM_CASETEST4291" directory created.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> RMD mm_casetest4291
< 250 RMD command successful.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
> QUIT
< 221
> CWD
/mmdftp/carrs-billington.com/mmdftp/carrs-billington.com
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
The file "/mmdftp/carrs-billington.com/Company.asp" was
skipped because the
old remote file could not be deleted.

If i was that anal about cpu overhead, would i be using
dreamweavers built
in ftp with its feature 100%cpu usage. Even on my core 2
extreme 9000 cpu!!
Thanks for the links, but everything in them has been ruled
out. The issue
is clearly not a setting within dw. Its some sort of windows
firewall
corruption
Even running wf.msc (advanced win firewall config) provides
no clues
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
>> why on earth?? why on earth not!
>
> If you are connecting via a router, wherever you are,
you do not need a
> firewall. Firewalls add overhead to your CPU and can get
in the way of
> other things, unexpectedly.
>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>
> Disabling a firewall is sometimes like disabling Norton
AntiVirus.
> Neither of those will ever see the light of day on my
computers! 8)
>
> Anyhow, you may find this useful -
>
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19012&sliceId=2
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "RyGa" <[email protected]> wrote in message
> news:[email protected]...
>> why on earth?? why on earth not!
>>
>> This is a laptop and only sped 60% of its life in
the office. All
>> machines in here are identical an this is the first
problem with this
>> setup in over 4 years out of 23machines. so i doubt
its a security issue.
>>
>> I have also discover renamining the dreamweaver
folder allows dream
>> weaver.exe to function ok. whatever is causing the
problem it is tied to
>> the full path.
>>
>> Our it people have also copied renamed cuteftp to
match the same path/
>> exe name and it too fails to function but renaming
the exe back to its
>> proper cuteftp name allows it to work.
>>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>>
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> So - you are running Windows Firewall AND a
network firewall? Why on
>>> earth?
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>> ==================
>>>
>>>
>>> "RyGa" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Ok, im getting some where with this...
>>>>
>>>> I found this thread
>>>>
http://dreamweaverforum.info/dreamweaver-general/20168-dreamweaver-ftp-suddenly-stops-work ing.html
>>>>
>>>> which had this solution:
>>>>
>>>> The problem was in Windows Firewall, which
did not recognized the
>>>> Dreamweaver on some way even it was removed
from the Windows Firewall
>>>> exceptions.
>>>>
>>>> The solution is a bit tricky:
>>>> 1. Remove the Dreamweaver from the Windows
Firewall Exceptions
>>>> 2. Copy & Paste Dreamweaver.exe on the
Program
>>>> Files\<Macromedia|Adobe>\Dreamweaver\
directory to a new executable
>>>> filename (e.g. Dreamweaver2.exe)
>>>> 3. Run the renamed program. After the first
FTP connection Windows
>>>> Firewall will ask for permissions for
connection
>>>> 4. Close Dreamweaver and run original
executable. SOLUTION: Windows
>>>> Firewall will ask for the permision.
>>>> 5. Remove Dreamweaver2.exe from WF
Exceptions
>>>> 6. Enjoy developing and uploading new sites
>>>>
>>>>
>>>> Now as i said previously, I have tried
disabling the windows firewall
>>>> but to no avail. but however, renaming (and
coping to a different exe
>>>> name) the dreamweaver.exe file allows me to
launch the newly named file
>>>> and ftp works fine.
>>>>
>>>> But following the solution above makes no
difference if i run the
>>>> original exe, I dont get to re-add to
firewall exceptions even though
>>>> it isnt there anymore, and the dw still
refuses to play ftp.
>>>>
>>>> I think this is a corruption of some sort
with windows firewall.
>>>>
>>>> Id like to get to the bottom of it though,
because after googling for a
>>>> while i see lots of others are having the
exact same issue. Even if the
>>>> problem is windows firewall related and dw
is innocent in all this, its
>>>> still good to have a solution for anyone
else to follow.
>>>>
>>>> I dont think leaving the dreamweaver.exe
called dreamweaver2.exe is it
>>>> as this breaks all the current registry
references to the proper file
>>>> name.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\SharedAccess\Parameters\FirewallPolicy\F irewallRules
>>>>
>>>> "Dooza" <[email protected]> wrote
in message
>>>> news:[email protected]...
>>>>> RyGa wrote:
>>>>>> I should have mentioned. Last night
i took my laptop home as i do
>>>>>> quite frequesntly.
>>>>>>
>>>>>> The problem remains even though in a
completely different
>>>>>> environment, so that rules out
network at work.. I even tried
>>>>>> disabling all security apps (win
firewall, nod and even that win
>>>>>> defender)
>>>>>>
>>>>>> My cuteftp using the same login
credentials (exactly the same)
>>>>>> continues to work without a problem.
>>>>>>
>>>>>>
>>>>>> I have this morning went through the
site area of the dreamwaever
>>>>>> options and double checked they are
the same as the machine nearest
>>>>>> me and they are.
>>>>>>
>>>>>> still no joy..
>>>>>
>>>>> Very odd indeed, maybe backup all the
site files and re-install
>>>>> Dreamweaver? Its a last ditch effort
though, as its a very strange
>>>>> problem.
>>>>>
>>>>> Dooza
>>>>
>>>
>

Can not connect to Cerberus FTP Server with PASV

I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
Response:          220-220-Welcome to Cerberus FTP Server
Response:          220 220 Created by Cerberus, LLC
Command:          USER test
Response:          331 User test, password please
Command:          PASS ***********
Response:          230 Password Ok, User logged in
Command:          CLNT FileZilla
Response:          200 Command okay
Command:          OPTS UTF8 ON
Response:          220 UTF8 support on
Command:          PBSZ 0
Response:          200 PBSZ=0
Command:          PROT P
Response:          200 PROT P OK, data channel will be secured
Status:          Connected
Status:          Retrieving directory listing...
Command:          PWD
Response:          257 "/" is the current directory
Command:          TYPE I
Response:          200 Type Binary
Command:          PASV
Response:          227 Entering Passive Mode (external IP,195,83)
Command:          MLSD
Error:          Connection timed out
Error:          Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.

Dan,
Looking at the output,
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike

Cisco CSS not NATing FTP 'data' connection

I have a CSS11501 that load balances traffic to 4 FTP servers.
2 of the 4 servers also initiate outbound FTP connections (Active mode) to other servers on the internet.
(When I talk about these 2 servers initiating a FTP session from behind a CSS I will refer them as 'client' to avoid confusion.)
Inbound FTP traffic to all the servers work fine. The outbound Active mode FTP traffic from the 2 client is failing (passive FTP works).
I have defined both the 'content rules' and 'groups' (source groups) for these connections.
But what I see on the PIX is this:
PIX515-active %PIX-4-406002: FTP port command different address: 10.1.1.15(10.1.1.16) to xx.xx.xx.70 on interface inside
I believe this dropped packet on the PIX is the acknowledgement 'ACK' packet from the client(sitting behind the CSS) to the connection attempt from the server (on the internet) for the 'data' connection. And basically the CSS is not translating the source address of the client from 10.1.1.16 -->10.1.1.15(VIP) for this acknowledgement 'ACK' packet.
Here is the relevant config:
For inbound FTP:
service ftp1
ip address 10.x.x.10
active
service ftp2
ip address 10.x.x.11
active
content ftp
application ftp-control
add service ftp1
add service ftp2
vip address 10.x.x.21
active
group ftp
add service ftp1
add service ftp2
vip address 10.x.x.21
active
For FTP servers that initiate FTP traffic and receive FTP request as well (i.e. inbound/outbound FTP)
service fftp1
ip address 10.x.x.16
active
service fftp01
ip address 10.x.x.17
active
content Fftp1 --> this does not have VIP but I tried adding a VIP same as the source group but to no avail.
application ftp-control
add service fftp1
protocol tcp
port 2021
add service fftp01
active
group fget
vip address 10.x.x.15
add service fftp1
add service fftp01
active
Inbound FTP works fine without any issues. Even outbound FTP (passive mode) works fine.
However active mode FTP fails and I see this error on the PIX:
PIX515-active %PIX-4-406002: FTP port command different address: 10.1.1.15(10.1.1.16) to xx.xx.xx.70 on interface inside
What am I missing here to get active mode connections to work with the CSS so that machines sitting behind the CSS can initiate active mode FTP connections? Do I need a content rule for the "data" connection as well???

For active FTP to work, the CSS need to inspect the FTP control connection and nat the PORT command.
The CSS is told to do ftp inspection when you configure the 'application ftp' command.
But for connections initiated by the servers, the traffic does not hit any rule and no inspection is to be done.
Therefore the CSS will only nat the ip header.
You could try to configure an ftp content rule with no vip address - to catch all ftp traffic and use a service pointing to your default gateway in transparent mode.
Then configure 'application ftp' to force ftp inspection.
It may work.
Haven't tested so.
Gilles.

CS3 FTP will not connect!

I am quite furious with Adobe. I paid the $450 to upgrade
from 8 to the Creative Suite 3 Web Standard package and installed
it last night. The main reason for the purchase was for Dreamweaver
CS3. I manage about 10 sites for clients and wanted to upgrade from
Studio 8 to CS3.
The installation went smoothly, no glitches... I fired up
Dreamweaver and began trying to connect to all of my sites.
Dreamweaver could only connect to three of my 10 sites. All other
sites gave me the standard login in inocorrect or wrong password
notice.
I then checked to make sure the firewall settings were
correct and the timeout set at something greater than 2 seconds. No
luck.. the program still will not connect to my sites.
I do a search on Google and discover that this appears to be
a well known issue with Dreamweaver CS3 but I can't find any real
answers as to how to fix the problem. One would think that Adobe
would address this on their own site but I can't seem to find a fix
there either.
I am using Windows XP Pro with Service Pack 3 installed. My
old version of Dreameweaver (8) still functions and can connect to
all sites.
I find this absolutly maddening that such a well known issue
has not been corrected by Adobe. They have posted nothing about a
fix or workaround. They continue to sell a product that obviously
has issues.. one of the most important issues.. being able to FTP
from the program.. one of the features I have loved about all
previous versions of Dreamweaver.. now seemingly rendered
useless... but I still pay a premium to upgrade to a program that
does not work.
Mad, you bet! Macromedia did not have these issues.. and just
try to get tech support to help you at Adobe.. I end up in
Bangalor, wait forever and then "Mike" puts me on hold afterwhich I
get disconnected and a dialtone.
Has anyone been able to solve the FTP probelm with DW CS3? Is
there documentation somewhere? Is there a webpage that clearly
outlines what to do to fix this issue? I'm out $450 here and mad as
hell!

I finally got CS3 working by removing all the sites currently
definded from the program then recreating them all over again...
That's not the way this should work and I still can't believe Adobe
has not addressed the problem in some manner. I searched and
searched for info on this issue and found nothing but posts
regarding firewall issues and 2 second timeouts.. none of which
would have solved my problem.
Adobe's switch to outsourced "help" is a further irritant.
Several times I have called support and ended up being disconnected
when the support guy could not "fix" the problem.
I bought a CS3 updgrade for Dreamweaver months ago but it
would not install because I had the Studio 8 product. I was
informed that I had to buy the CS3 Suite to upgrade Dreamweaver. So
I was out the money for the store bought boxed upgrade.. Adobe told
me to submit a LOD "Letter of Destruction" along with proof of
purchase and they would refund the money... that was over six
months ago and I have yet to see a dime. Every time I call about it
I end up talking to "Mike" in India and the connection gets
dropped.
Needless to say I am very dissappointed with Adobe these
days... on a number of levels.

Ftp problem , Not connected.

I am trying to ftp to one window server from my labtop but can't , i can ftp to other unix servers, any idea to fix this?
C:\Users\arif.gulzar>ftp orasbo2
ftp> dir
Not connected.
ftp> bye
C:\Users\arif.gulzar>ftp 172.29.0.119
ftp> dir
Not connected.
ftp>
C:\Users\arif.gulzar>ping orasbo2
Pinging orasbo2.internal.local [172.29.0.119] with 32 bytes of data:
Reply from 172.29.0.119: bytes=32 time=60ms TTL=123
Reply from 172.29.0.119: bytes=32 time=56ms TTL=123
Reply from 172.29.0.119: bytes=32 time=54ms TTL=123
Reply from 172.29.0.119: bytes=32 time=55ms TTL=123
Ping statistics for 172.29.0.119:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 54ms, Maximum = 60ms, Average = 56ms

Hi.
It's look like ftp server on orasbo2 is not started.
For check:
on orasbo2 netstat -na | grep 21
For enable.
Solaris 10:
svcadm enable ftp
Solaris 9 and below:
Edit /etc/inetd.conf for uncomment ftp and restart (kill -HUP) inetd
Regards.

Ftp will NOT connect

Using CS4, used to work, now will not connect with any ftp settings. Using "test" says connected right away, try all combinations of ftp setting and will not connect. Same pw and user will work thru Filezilla and older version DW. This the screen that comes up.BTW, works on ALL other DW projects, all hosted by same company but not this one...it is on a different server...

I went to an older computer with Dreamweaver MX, set up identically, and connects to ftp right away, no problems. Other websites i have with DWCs4, no connection problem, it is jsut this one site, the one I need to work on. And it connects thru Filezilla...frustrated no end. Also, on other computer, same website will not connect thru DWCS4...sure could use a solution.

Can not connect to ftp with mountain lion

Hallo everybody,
i have a problem with my ftp-client, i use cyberduck, i can not connect to any ftp-server...
evertime i get this message:
USER user_xyz
331 User user_xyz OK. Password required
PASS **********
530 Login authentication failed
this will only happen when i try it with mountain lion 10.8.2
with snow leopard and lion everything works fine and i can connect to the ftp-server.
i try to take another ftp-client but its the same... i try filezilla and transmit.
can anybody help me with this problem?

In your Network System Preferences, under Advanced, Proxies tab, is Passive mode selected? If it is, try toggling it off then on (or try it with it off).
Also, have you contacted the Cyberduck people to ask if they know about a problem?
Have you tried connecting from Terminal?

HP C4740 will not connect wirelessly to HP desktop

I have an old HP desktop (prob Pavillion) running Win XP Pro w/ SP 3. I have 2 MB RAM. I purchased an HP C4740 AIO printer about 6 months ago. At first it hooked up fine and performed very well in wireless mode. Then when replacing an ink cartridge one of the retainer tabs broke. Long story short I had to replace the unit. HP gladly did so and I got a brand new one.
When I got the new one I hooked it up and installed the software exactly per the instructions for use as a wireless printer. Unfortunately, no matter what I do it will not connect to my wireless network. The only way to use this printer is via USB cable. Two things happen that I find interesting: it does not recognize the printer (even thought it's connected by USB cable) and it doesn't recognize my wireless network (even though it does recognize another unknown network). Even when I try to manually enter my network SSID and Passphrase it will not recognize it. I have also tried unsecuring the network but still no success.
The network is secured but I have the SSID and passphrase information. For reference, I have a Dell laptop and Lexmark printer that connect without issue. My iPhone 4 connects without issue. This C4740 will not. I have uninstalled the software and even gone into the registery to locate and remove any entries associated with this printer. Still nothing works in wireless mode.
Need help. I am by no means a computer expert, especially with networking. I know enough to be dangerous but still make it through the day! I'm ready to toss this and pay the much higher price for the much more usable Lexmark! Only problem is I'm just cheap enough that I'm willing to try to make this printer work.
Thanks!

Hi,
Download the latest installer software for your printer on the link below and save it to the Desktop.
ftp://ftp.hp.com/pub/softlib/software11/COL28119/mp-71555-3/PS_AIO_06_C4700_USW_Full_Win_enu_140_175...
Next download and install Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect your printer from your PC.
Run revo and use it to uninstall your printer software. Right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left over files and folders. Once the uninstall has completed, reboot the PC.
Temporarily disable any security software ( Antivirus and Antispyware )
Now try running the software installer from your Desktop by double clicking the installer. Do not connect the printer to the PC until the software asks ( Whether wired or wirelessly ). If everything install Ok, remember to enable your security software.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Leopard Not connecting to Windows XP

Having a real problem connecting my macbook via ethernet through a router to my windows XP computer. Windows XP can see my mac, and I can browse my files, and sometimes my mac can see the Windows XP box in the finder, along with various other computers on the network: but it cannot connect to any of them. I click connect as, and it does nothing apart fro telling me it is connecting, and then 5 minutes later it says Connection Failed. File sharing is enabled on both computers, I have tried connect via SMB, ftp etc using my mac's IP address from the Windows Computer, and vice versa using my Mac IP address. They are both set up using DHCP. I cannot see why this is not working, as they were working fine only a week ago. All went wrong when i unplugged my macbook from the ethernet connection. Anyone got any ideas? Thank you in advance.

James, I feel you pain. I too have the same problem, however, my network(ethernet) has a total of 5 computers. One of which is a macbookpro. I can see all of the computers except one. When I try to connect, I get the "connecting to......" and nothing happens as well. Other computers are "visible" and available to connect to. I am new to the Mac and literally have had no problems setting up everything except for this one issue. I am researching other settings for the computer which will not connect, and looking for any differences. Maybe firewall setttings, maybe something in my Norton application. I will keep looking at this post to see if anyone has ideas and or suggestions. One other question for you as a fellow Mac and Xp user...Do you see your Mac on the Windows network places? I do not. Look forward to the forum helping out soon!

FTP/SSL Connection Problem for FTP Receiver Adapter

Hello All,
We are trying to establish an FTPS/SSL connection with one of our customers from our XI(Unix) system, and are receive following error:
iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
Communication Channel Parameters:
Connection Security: FTP (FTP Using SSL/TLS) for Control Connection or FTP (FTP Using SSL/TLS) for Control Connection and Data Connection
Command Order: AUTH TLS, USER, PASS, PBSZ, PROT
Checkbox - Use X.509 Certificate.... checked (Certificate was provided by third party (customer issued) and uploaded to service_ssl certificate store on J2EE server)
Data Connection: Passive
Port: 10021
Keystore: service_ssl
X.509 Certificate & Private Key: ssl-credentials
Note: Initial handshaking occurs but connection is being dropped by the third party FTP Server when SSL certificate credentials are being validated. We also tried connecting to the third party FTPS server using standard FTPS client(FileZilla software), this connection gets established successfully with no certificate issues which means certificate and third party FTP Server is functioning correctly.
We therefore are thinking that the problem lies with our XI system being unable to load the certificate information correctly at the point when FTPS session is being established.
Your help and suggestions will be greatly appreciated.
Thanks and Best Regards
Prashant Rajani

Hello All,
Further in order to test connection set up and communication channel configuration we tried simulating the FTP connection locally by configuring FTP Server using FileZilla at a local machine and accessed it from Client's XI Server.
This set up simulates the problem we encounter with our customer's FTP Server.
If connection security parameter in communication channel for Sender FTP Adapter is set to "FTPs( FTP Using SSL/TLS) with Control Connection" only, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to "FTPs( FTP Using SSL/TLS) with Control and Data Connection", we receive error "Certificate rejected by Chain Verifier". The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
This is what the FTP (FileZilla) sees when the XI system attempts to set-up a fully encrypted data (FTPS) connection i.e., connection security parameter value as"FTPs( FTP Using SSL/TLS) with Control and Data Connection" :-
- (not logged in) (10.18.106.34)> Connected, sending welcome message...
- (not logged in) (10.18.106.34)> 220-FileZilla Server version 0.9.18 beta
- (not logged in) (10.18.106.34)> 220-written by Tim Kosse ([email protected])
- (not logged in) (10.18.106.34)> 220 Please visit http://sourceforge.net/projects/filezilla/
- (not logged in) (10.18.106.34)> AUTH TLS
- (not logged in) (10.18.106.34)> 234 Using authentication type TLS
- (not logged in) (10.18.106.34)> SSL connection established
- (not logged in) (10.18.106.34)> USER test
- (not logged in) (10.18.106.34)> 331 Password required for test
- (not logged in) (10.18.106.34)> PASS ***********
- test (10.18.106.34)> 230 Logged on
- test (10.18.106.34)> PBSZ 0
- test (10.18.106.34)> 200 PBSZ=0
- test (10.18.106.34)> PROT P
- test (10.18.106.34)> 200 Protection level set to P
- test (10.18.106.34)> SYST
- test (10.18.106.34)> 215 UNIX emulated by FileZilla
- test (10.18.106.34)> PWD
- test (10.18.106.34)> 257 "/" is current directory.
- test (10.18.106.34)> CWD /payment/
- test (10.18.106.34)> 250 CWD successful. "/payment" is current directory.- test (10.18.106.34)> TYPE I
- test (10.18.106.34)> 200 Type set to I
- test (10.18.106.34)> PASV
- test (10.18.106.34)> 227 Entering Passive Mode (10,27,7,103,15,63)- test (10.18.106.34)> STOR BHPDSB20060911-153840-834.txt
- test (10.18.106.34)> 150 Connection accepted
- test (10.18.106.34)> Data connection SSL warning: SSL3 alert read: fatal: bad certificate
- test (10.18.106.34)> Data connection SSL warning: SSL_accept: failed in SSLv3 read client certificate A- test (10.18.106.34)> Data connection SSL warning: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate- test (10.18.106.34)> Data connection SSL warning: error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure- test (10.18.106.34)> 426 Connection closed; transfer aborted.- test (10.18.106.34)> QUIT
- test (10.18.106.34)> 221 Goodbye
- test (10.18.106.34)> SSL connection established
Please suggest your valuable inputs if we are missing out something. Any helpful inputs in this regard is highly appreciated.
Thanks and Best Regards
Prashant

FTP RFC Connection setup - step by step

Good afternoon
I am not a BASIS/System Administrator; in my colleague's absence I have to attempt setting up an FTP RFC Connection.
I have the following information:
1. IP Address
2. Username
3. Password
The following is the setup I tried:
a. Connection Type == G - HTTP Connection to Ext. Server
b. Target Host (Technical Settings Tab) == &IP Address&
c. Logon username (Logon/Security Tab) == &Username&
d. Logon password (Logon/Security Tab) == &Password&
But, the 'Test Connection' fails with 'ICM_HTTP_CONNECTION_FAILED'.
Any suggestions to resolve will be much appreciated!
Thank you and best regards, Adrian

Hi Adrian,
Could you detail what you are trying to set up a connection to? This would help determine whether the connection type you are using is correct.
Regards.
Steve.

Error " Could not connect Administratin Server "

Hi All,
I am getting an error while connecting to Administratin Server " Could not connect to Administration Server "
Server : AIX 5.3 ML7 64 bit
Application Server : Apache Tomcat
Version : Hyperion System 9.3.1
While configuration it does not give any error and shows the successfully deployed.
I re-configured the Adminstration Services again, stopped / re-started the services, but it did not help.
Any suggestion / help would be highly appreciated. Thanks !
Regards
BD Mahendru
Presently in Jordan : + 962 777 603308

AIX server for SS. I didn't want to mess up my original files so I created a new start script and a new setJavaRuntime script.
You can use FTP to send the copied file and edit. there and sent it back
1. Make a copy of the file /Hyperion931/deployments/Tomcat5/bin/ startSharedServices9.sh
2. Edit the original startSharedServices9.sh file and change the section that sets the Java:
To check JAVA HOMe. please type env or open the . .profile and you should see that,
This is what you will see.:
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime.sh"
to
# set JDK/JRE VENDOR
if [ -r $CONFIGTOOL_HOME/setJavaRuntime142.sh ]
then
. $CONFIGTOOL_HOME/setJavaRuntime142.sh
else
echo "ERROR: Could not read $CONFIGTOOL_HOME/setJavaRuntime142.sh"
3. Copy the Hyperion931/common/config /setJavaRuntime.sh to setJavaRuntime142.sh
4. Edit the setJavaRuntime142.sh file and modify the JAVA_HOME to point to Java 1.4.2:
JVMS="JRE-IA64 JRE-64 JRE"
for JVM in ${JVMS}; do
if [ -x "${HYPERION_HOME}/common/${JVM}/${VENDOR}/1.5.0/bin/java" ]; then
JAVA_HOME="/usr/java14"
break;
Use the modified startSharedServices9.sh to start Shared Services.
Perform the Sanme with AAS also.
Kind Regards,
Sriram

DW's FTP not connecting.

Similar Messages

Maybe you are looking for