DW self corrected flash issue, now it does not work

I have a flash banner at the top of every web page. When I opened a page today in DW it stated that there was a problem with flash and wanted to correct it. Usually I cancel this but today I mistakenly clicked ok. After saving the page and uploading it, I see that it no longer displays correctly. I know my site has a lot of issues and I have successfully avoided fixing this until now where I am stuck.
If someone can help me restore that page I would be appriciative.
Perhaps the code can be copied from another but I do not know if that will work.
Links to the pages as follows...
first one is NON-WORKING
second is WORKING
http://friesenequipment.com/hobbysales.html
http://friesenequipment.com/usedproducts.html
This is a screenshot of the prompt DW gives me to correct flash when I open a page with the flash banner.

I am able to repair this by copying the working code from another page. So no immediate problems any more. But would someone care to tell me why when I answer yes to this "correction prompt" it messes up my flash object.

Similar Messages

I have installed new version of flash player now it does not work.

I have un-installed it and re-installed. I have adobe shockwave object enabled. when I try to view video i get the error "you require flash plugin to watch this content";
I now also have the added issue that I can't download attchments from my e-mails.
can any one help?
I'm using 64 bit windows 7 laptop and IE9

Hi all
don't worry i have found the answer on the adobe find flash player page http://helpx.adobe.com/flash-player.html
It was easy if using IE9 disable ActiveX filtering.
One problem solved.

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

FLASH PLAYER 10.1 does not work on my 32bit browser

the newest version of FLASH PLAYER 10.1 would not work on my 32bit FIREFOX browser. so I installed flash player on a 32bit VERSION of internet explorer. it worked fine for a few days till ADOBE asked me if i wanted to update my player. NOW IT DOES NOT WORK ! ! ! NOW IT DOES THE SAME "GREEN FLASHING BLANK SCREEN THING" THAT IT DOES ON MY FIREFOX BROWSER ! ! ! WHAT GIVES ? ! ? ! ? !

Hello I have a Dell inspiron 6400 computer with window's home vista and with the latest standard Internet explorer. i was enjoying the fact that i could watch Youtube and other such sites until i was prompt to downlaod the latest version (10.1) flash player. which like anyone else I did, but not the mcfee anti virious as it would be inconflicsion with Norton anti virious.
Now when i go to view a youtube etc I just get a blank or black screen.
Please how can i rectify this problem
ta,

I HAVE EARLIER PREPARED WINDOWS REPAIR DISC, NOW IT DOES NOT WORK

140525
I HAVE WINDOWS 7 ULTIMATE VERSION- 32 BIT
I HAVE EARLIER PREPARED MANY " WINDOWS REPAIR DISC" FROM TIME TO TIME AS A PROTECTION ON THIS VERY LAPTOP AND OS.
NOW IT DOES NOT WORK AND GIVE ERROR CODE -- 0XC00AA0301.
I TRIED SEVERAL TIMES AND WASTED QUITE A FEW DVD'S.
CAN YOU GUIDE?
REPLY ON [email protected]
HOPE TO RECEIVE HELP.
GJDMBH

Once downloaded the Window7 setup you then want to download the windows free burning app from the same thread.
Also visit the Microsoft website link below as has basic guidance that may help you.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool
Basically with the Windows free burning app you can make either a USB boot stick media of windows 7 or a good older fashioned DVD boot media. Just follow instructions & see how you go, if get stuck come back to this thread & post details on your issue - hopefully myself or other members will be able assist you further if needed.
Like my post? Click Kudos (thumb+) to show appreciation.

Prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Was it just this one time? Could be that you, or your mom, were experiencing network problems. Try again at a later time.

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK. It keeps telling me that this router is not supported. There is no firmware to roll back to. It worked fine until a power outage. HELP!

If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.

HT3180 In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

In the middle of the updating, iTV was unplugged. Now it does not work at all. Do you have experience, what to do now?

Ouch. I am afriad the news is not good. If there is no longer a working firmware instance on ATV there is nothing you can do. That's why it has that message about not unplugging it during the update.
Nothing happens when you plug it in?

I have updated ITunes and now it does not work

I have updated ITunes and now it does not work. It worked before the update was installed, now it doesn't. I cannot un install it either...

Use this application to uninstall iTunes and all related components
http://support.microsoft.com/mats/program_install_and_uninstall/en-us

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

After sending sound from find my iphone, now ipad does not work

after sending sound from find my iphone, now ipad does not work
it can't be unlock and scrren is blank, only siri works

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Just installed Office 2011 on my MacBook Pro Retina and now Safari does not work

Just installed Micro Office 2011 on my 13" MacBook Retina and now Safari is not working correctly. Pages load very slowly or not at all.
Any idea of what's wrong?
Thanks

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

DW self corrected flash issue, now it does not work

Similar Messages

Maybe you are looking for