DW setup.exe doesn't work

Hi
I download dreamweaver CS3 trial version. I click setup.exe
after initialising, it close the window. cannot onstall the
software.
No problem for me to install in my home computer but doesn't
work for my work computer.
I am using windows XP at work. any suggestion??

I am having the same problem. I have XP 2, and have
downloaded CS3 and have used a DVD of the full version, and after
the installer is done, the setup screen pops up momentarily then
disappears. I am at my wit's end!
All my virus software, security, etc, anything that runs in
the background is off. The only other Adobe programs on my computer
are Photoshop CS2 and Reader 6. My previous version of Dreamweaver
is version 4.

Similar Messages

Setup.exe doesn't work for Captivate

I just purchased the Adobe Captivate 4 program and chose the download option. I downloaded the program and when I went to unpack the software I got the JScript error (Please note this system already has the full Adobe Design Premium CS4 installed and functioning). I was able to repair the issue but I'm now unable to launch the Setup. I double click to run but it just does nothing. It shows up in my Task Manager as a running process but doesn't do anything. Please help!
Operating System: Windows XP
Chrissy B

Hi Chrissy
You may wish to try downloading again. Sometimes a download may become corrupt during the process.
If you try again and it still fails, you likely need to contact Adobe Support to assist you with it.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer

Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
When the OUI tries to launch,the following error appears
setup.exe has stopped working.
Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
Thanks.
Edited by: 4joey1 on Apr 12, 2011 11:35 PM
Edited by: 4joey1 on Apr 12, 2011 11:36 PM

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.

Hello and sorry for my english. My name is Jean-Pierre BRETHES and I have a problem with the creativecloud.exe program which doesn't want anymore to start. (since a while now) The icon in the system tray doesn't appear and it still to be gray (not red). When I clic to lunch the program nothing happen. When I try to reinstall it the download end by a windows "error 50" and everything is stopped.
AT the beginning I wanted to download In design program to try the PAO functionalities. Thank to help me. My email adress is <removed email - kglad>. Have a nice day. JP

Hello and sorry for the delay. Thank you for your answer. I did what you wrote and everything is fine now. Really thank you for that. I fully understood regarding my email address in my message. I will not anymore do this error.
Have a nice day.
Sincerely, Jean-Pierre BRETHES
De : kglad
Envoyé : dimanche 6 juillet 2014 23:33
À : Jean Pierre BRETHES
Objet : CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
created by kglad <https://forums.adobe.com/people/kglad> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/6527054#6527054>

WRT400N setup.exe has stopped working

I just got a brand new HP Pavillion desktop with Vista 64 and I am having installation issues. Every time I put the setup disc in the drive it fails to load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried skipping the autorun and going in to my rom drive and manually selecting the setup.exe file. The initial splash screen appears and says please wait loading but I never get any farther than that because the program locks up. I thought maybe the disc was defective but I have tried it on an XP desktop and an XP netbook and the disc works fine on both of those. What gives? I have searched this entire forum and it seems like I am the only person having this problem. Is my new computer defective or is it the user
Solved!
Go to Solution.

Is the new Vista Dekstop is wired computer or wireless computer ?
Are you able to go online with the other wired and wireless computers ? If yes then, you do not need to run the CD anymore on the VIsta Dekstop.
If the new Vista dekstop is wired computer then, just connect the eternet cable from the computer to the router on one of the 4 eternet port and restart the computer and it should be able to go online.
If the new Vista dekstop is wireless computer then, try to locate your network and connect it using the secuity key(if the network is secured)...It should work !!!

Satellite A300D - Upgrading from Vista - "Setup.exe has stopped working"

Hello,
I am using Satellite A300D with Vista and I have been trying to upgrade to Windows 7 using the Toshiba Upgrader.
After choosing the language and proceeding with other steps, it asks me to uninstall a bunch of programs. Some are uninstalled just fine but when it comes four other programs it says "Setup.exe has stopped working" and it does not uninstall.
I have tried uninstalling them manually but I got the same message.
These programs are;
Atheros Driver Installation Program
Toshiba Hardware Setup
Toshiba Supervisor Password
Realtek High Definiton Audio Driver
As a result I cannot proceed with the upgrade.
Anyone know what the issue might be?
thanks in advance,
Can - TR

I am having the exact same problem. I have the toshiba satellite 350D. I am only stuck at the atheros driver installation program. As soon as it's supposed to be uninstalled I receive the " setup.exe. has stopped working" I tried uninstalling manually as well and get the same message.
I think the only fix would be to reinstall vista and then try upgrading to windows 7 again. I would like to stay away from reformatting though.
I would love an answer to this question as well!! (frustrating)

Cannot install ZEN V -- Setup.exe has stopped working -- CTCABEX.

I cannot install Creative Software for Zen V. Just before the installation finishes, I get the message: "setup.exe has stopped working. A problem with caused the program to stop working correctly. Windows will close the file and notify you if a solution is available."
I also get the following message: CTX Installer-Install Shield Wizard that file CTCABEX.dll not found.
Any ideas on how I can load the creative Zen V software>
Thanks,

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

Page Setup dialog doesn't work

Hi everyone
My generic Page Setup dialog box as e.g. used for Word etc. doesn't work:
In the Page Setup dialog, the "Setting" menu doesn't work at all, i.e. I can see the dropdown but it doesn't accept my changes (it's fixed on "Page Settings"). All other menus or choices are accepted but then the "OK" button doesn't work; it just flickers briefly and then goes back to blue. The "Cancel" button makes all contents of the dialog box disappear except for the frame and the buttons. Either way force quitting and relaunching the application is the only way to continue working in the application.
What could be the issue here?
A few specs on my hardware, printer and system:
- MacBook Pro (brand new)
- OS X 10.5.5
- Printers: hp LaserJet 4200 (main printer), iP5200R, OKI B6200, Lexmark E321. All these printers I used without problems with my old PowerBook G4.
The problem occurs with all applications using this generic Page Setup dialog, such as Word, Grab etc. In Excel e.g. all these functions work (it uses a different kind of dialog box for the page setup).
The problem could possibly have started to occur when the Lexmark printer could not be installed automatically so I assigned it another Lexmark driver, which seemed to work. But I'm not sure whether those two problems occurred at the same time.
What I tried already:
- uninstall and reinstall all printers in the Print & Fax part of the System Preferences. I uninstalled all printers and (without restart) reinstalled the hp printer only. The problem was still there, even upon restart.
- reinstall Word (first I thought it was a Word problem)
Any ideas??
Message was edited by: thuns72
Message was edited by: thuns72

Hi,
Try to increase the size of repeating frame, as I follow this strategy in my report find the outermost repeating frame and increase its size to whole page than increase the size of your required repeating frame if you want to break page on this group, no need to set max record and page break properties(as I saw page break property never works).
Thanks.
Khawar

Adl.exe doesn't work for me

I am developing for both Mac and Windows. I have flex_sdk_3
installed on both machines. For Mac, everything works fine. For
Windows, everything except running adl.exe works. It complains
"Adobe AIR could not be found." On both machines, I unzip'd the
flex_sdk_3 to /usr/local/flex_sdk_3. (Under Windows, I'm doing this
under Cygwin, so that would be C:\cygwin\usr\local\flex_sdk_3.) I
set FLEX_HOME in my environment correctly. Even if I explicitly
specify the location of the runtime with:
-runtime C:\cygwin\usr\local\flex_sdk_3\runtimes\air\win
ant it still doesn't work. I've tried every variation of
-runtime with different directories and nothing.
A little help?

Hi,
I have cancelled your Export PDF subscription for the order no.AD013879714.
Your refund no.is 66181172.
You will get the refund in 7 business days.
Regards,
Florence

Oracle 9i download - setup.exe doesn't do anything

I downloaded the three files for EE 9i, extracted to Disk1,2,3 etc. When I run setup.exe nothing happens. If I run setup.exe and watch task manager I see javaw.exe runs but then stops - there are no error messages, only ORA..... directories full of files left in temp.
Does anyone know how to make this run?
Thanks
[email protected]
- Server name NT
- Filename ?
- Date/Time Nov 18
- Browser + Version IE 5.5 SP2
- O/S + Version NT 4.0
- Error Msg -Nil-

Hi,
Had the same problem with the Oracle 8.1.7 install. Try this:
http://www.indiana.edu/~dms/databases/oracle/pentium_iv_bug_fix.htm
It worked for me.
Good luck!

Oracle 11g R2 Install on Windows 7 64 bit setup.exe does not work.

Hi
I am trying to install Oracle 11g R2 on my Windows 7 Ultimate 64 bit. When I execute setup.exe as Administrator the command window flashes and exits. I could not even see what the message is. Also tried command prompt. Can anyone help me resolve this issue?
Appreciate your support.
Regards

user1484609 wrote:
Installation Successful after executing the install from C:\temp and not within users. Even if you execute as Admin Oracle Install does not have access to the folders in C:\Users...
Finally the install is successful.Congratulations.
And thank you for posting your solution. The security issue was quite a surprise to me as well, although it ties into a PC World article I read today.
To continue, please make sure you have a static IP address. If your system uses DHCP, that may mean setting up Loopback Adapter, configuring a static IP address other than 127.0.0.1 for that (for example you can use 192.168.123.101), and updating C:\windows\system32\drivers\etc\hosts. (note - no 3 char 'type on the hosts file) to include an entry like '192.168.123.101 myhost.example.com myhost', and perhaps setting your ORACLE_HOSTNAME variable. This is all described well in the Install documentaiton at http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#BABIAEEC

HP Photosmart B010 , Setup.exe doesn't run

Hello, i'm experiencing a software problem with a Photosmart B010,when I open the setup.exe(from CD, installer o even wizard installer),it runs in background forever(nothing shows, no app no errors), tried the unistall L3 method(http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01501548), nothing change, when i open the unistall bat a command prompt comes out, i press ENTER and it goes immediatly away, is it normal? If it is normal then where is the problem? Thank you
Bye

Hi,
Follow the steps below and check if that resolve the issue:
First open the Device Manager and expend the Processors tab.
If you have an AMD processor install teh following update and then try installing the HP software:
http://ftp.hp.com/pub/softlib/software12/COL40390/oj-98352-1/HPAMDC50PATCH.exe
If you have any other processor (e.g. intel) the following steps will morelikely be relevan for a such:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select Never and confirm by clicking the Turn Off button.
If you have any other security software disable it as well.
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Reboot your PC
8. Run the installation file and check for any difference.
9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
Please let me know if those might help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Configuration of OIM on windows 7 fails with "setup.exe has stopped working

I have tried everything I can think of and I can't run the config.bat for OIM. OID OVD etc installs and works fine.
Windows 7 Professional 64 bit
8GB memory
I can't believe I'm the only one. If anyone has a suggestion. Thanks

Peter,
The higher-tiered (supposedly) Tech had me go to that Web page and follow those instructions earlier this week. I followed all of them, and still had the same problem. That was when she told me that the problem is because my laptop is connected to a Domain (see first post).
4/15/10 Update: My IT support gave me the password to log onto my laptop using the Administrator logon. This login is not connected to our Domain because it is used by our IT folks to troubleshoot problems with the laptop itself. I installed only Acrobat, RoboHelp, and FrameMaker from this login last night. Then I opened Acrobat 9 and "updated" everything. RoboHelop 8 now works (and it is accessible from my regular login), but FrameMaker is now giving an error message, something about the dictionaries, and it does not open. Here is the error dialog being thrown now by FrameMaker 9:
I have updated my case with this info and the screenshot of the error dialog. If you know what is causing this error in FM, please let me know what to do to fix it.
Thank you for your help!
Marlo

Windows 8.1 Dell Backup and Recovery exe doesn't work

I purchased dell Inspiron 3542, initially when i click on Dell backup and recovery then it was moving to create backup page. I install some software and transfer some data in my laptop, after this dell backup and recovery is not working. Not able to create backup in usb.
When i click on dell backup and recovery then it ask me for permission when i click on yes, nothing happen.
Any suggestions?

Uninstall it. Reboot. Then install. Reboot.
All of this should be done as Run as Administrator or it will fail.
16GIG or Larger usb flash drive is required. 8 gigs is too small.
http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=8HY96

DW setup.exe doesn't work

Similar Messages

Maybe you are looking for