DW Site Setup Dialog Boxes not editable

I am trying to set up a new site. When I bring up the DW Site Setup Dialog Box, I cannot click into any of the fields. I am using DW 11.0 Build 4993.

Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
Plan B, Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
Nancy O.

Similar Messages

Site definition dialog box

I'm very new to Dreamweaver and am trying to bring in a website design that I did in photoshop. Trouble is, all the tutorials I see mention the Site Definition Wizard which is supposed to be accessible through the Site Definition Dialog Box. My understanding is that when it should come up when I go to Site, New SIte. Trouble is, I get a Site Setup dialog box instead and can't figure out how to get to the Wizard. Any advice?

Hi Julie,
That *is* the revamped Site Definition screen in CS5.
Site is for local settings
Servers is for your remote settings (FTP server, username, password etc)
http://help.adobe.com/en_US/dreamweaver/cs/using/WSee8adad8a8c1990b-6cb1a36e1266d204f20-80 00.html

DW 6 trial, running on XP w/ service pack 3. The Site/Site Management dialog box is transpare

Cannot see any text or fields. The web page behind it shows.
The Site/Site Management dialog box is transparent.
see screenshot: http://www.mid-americaclutch.com/transparent_DW_dialog_Box.jpg

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

How can I use metric units in Page Setup dialog box?

When I go to my Page Setup dialog box, in Margins tabs, I see that I can specify the margins in inches. However, in my friends PCs, I have seen Page Setup dialog boxes that use millimeters for handling margins.
How can I make my version of Firefox to use millimeters instead of inches? Using this obscure unit is inconvenient for me. I prefer to use the internationally-accepted metric unit.

I can't find documentation about the settings, so you'll need to experiment a bit. I hope you're using A4 paper size instead if US- Letter, because I suspect that you will find out that the length of the paper won't be able to be set to Letter if you use the metric size unit setting.
Type '''about:config''' in the URL bar and hit Enter. <br />
''If you see the warning, you can confirm that you want to access that page.''
Pref name = print.printer_''printer_name''.print_paper_size_unit <br />
and maybe <br />
print.printer_''printer_name''.print_paper_size_type <br />
Try setting the '''Value''' to '''1'''
There's a support thread about metric settings here.
http://forums.mozillazine.org/viewtopic.php?f=39&t=588284

Printing directly to printer without Print setup dialog box

I am using Crystal Reports 2008 with VB.NET 2008. Using the CrystalReportViewer control, how can I print directly to the printer without having the Print setup dialog box popup every time?

Only way would be to create your own print button and use the report engine APIs. A good sample app is vbnet_win_printtoprinter in this sample download:
https://smpdl.sap-ag.de/~sapidp/012002523100006252822008E/net_win_smpl.exe
The developer help is a good place to have a look also;
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
https://boc.sdn.sap.com/developer/library
Additional resources:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208edbbf-671e-2b10-d7b5-9b57a832e427
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/702ab443-6a64-2b10-3683-88eb1c3744bc
Ludek

Dialog box "not enough stoage" appeared on

dialog box "not enough stoage" appeared on iPad; this iPad cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings...my choices are "close" and "settings"...neither works...help?!

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. Then use this guide to manage and free up storage space in your account: http://support.apple.com/kb/ht4847.

Why is the 'Choose icon...' button in the Options tab of the field property dialog box not enabled?

I am using Adobe Acrobat Professional XI running on Windows 8.
This “feature” has been bugging me for some time now. I remember it happening when I used Acrobat 9 Professional (Windows XP) and it is still happening in Acrobat XI Professional. I think I figured out a situation when I can reproduce this “feature” conistently and I hope someone fixes this.
Try the following and see what happens:
1. Acrobat Professional is not open.
2. Launch Word and start editing a document (or some other authoring tool that can generete PDF document).
3. After editing the document, generate a PDF version of the document.
4. Launch Acrobat Professional and edit the PDF document generated in 3.
5. Add a button.
6. View the button's properties.
7. Change the Fill Color property in the Appearance tab to none.
8. Change the Layout in the Options tab to Icon only.
Now here is what bugs be. Shouldn’t the 'Choose Icon ...' button be enabled? It is not enabled after step 8. It is possible that 'Choose Icon ...' button is enabled for some of you. I this case, it would be nice if at least one of you who experience the same bug say so in this thread so that Adobe doesn't think I am sending them on a wild goose chase.
I can enable it by selecting a different tab and then returning to the Options tab. A similar thing happens when reverting back from 'Icon only' to 'Label only' but I am not sure how to reconstruct a scenario for this one.
Here is the dialog box for one instance when I noticed the bug.
Regards,
John

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

File Save dialog box not showing correct file name while saving file

hi
Currently, after the Submit button is hit, the File Save dialog box is displayed. If the user saves the file and then opens it then the output appears correct however if the user chooses to open the file without saving on the local machine then the correct viewer is not used to display the file. The name of the file is defaulted as qotSCopPrint.jsp and the default file viewer for jsp files is chosen to view the file. The format of the file is obviously not text (it is either pdf or rtf) so the output shows binary characters.

data : v_repid like sy-repid.
parameters : p_file like rlgrap-filename.
initialization.
v_repid = sy-repid.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = v_repid
            dynpro_number = syst-dynnr
            field_name    = 'P_FILE'
       IMPORTING
            file_name     = p_file.
Message was edited by:
        Chandrasekhar Jagarlamudi

Ps CS5 "Print Page Setup" dialog will not open

Hello: I was printing via my Photoshop CS5.
I accidentally created a paper size of 0cm x 0cm and attempted to print (up to this point Photoshop and Print worked).
I now (permanently) get an error message: "There was an error opening your printer. . . "
Photoshop >File >Print. . . will not open the Print Page Setup.
Photoshop >File >Print one copy (works, but still tries to print 0cm x 0cm, the printer spits out a blank page).
Using the (Mac/Apple) app 'Preview' I deleted the paper size preset '0cm x 0cm'.
apps; Preview, Text Edit, Mail, Word, . . . all print properly (they can open the 'Print Page Setup' dialog).
I set up two other printers (now three in total) and they work with all applications (except Photoshop).
I uninstalled and re-installed Photoshop and my printers, including all their preference files.
Also, I again deleted Photoshop preference files by opening Photoshop while pressing 'Shft-Opt-Cmd'.
In 'System Preferences' >Print & Fax >Printers; I reset my computer's "Printing System".
I repaired 'Disk Permissions', Safe Boot and have also done multiple restarts.
Since only Photoshop has a problem, I believe Photoshop has (somewhere) set a preference thinking it's default paper size is 0cm x 0cm which is throwing an error and preventing the 'Print Page Setup' from opening.
I updated Photoshop Adobe Air, Printers, . . . after re-installing.
I ran an app that clears my computer's caches.
I reinstalled (and updated) my computer's operating system (OS only, not my account and data).
I would appreciate your help. Thank-you, M_L_R
Mac OS: 10.6.8, Apple/MacPro 2009, 2 x 2.93GHx 8-Core processors, 16GB of Ram (DDR3 1066 MHz)

Hello: I repaired my (Print: Page Setup. . . dialog panel will not open) problem.
The fix was one of the many suggestions I researched in the 'Adobe Help'.
    Unfortunately I dismissed this solution (until now).
    reference: http://helpx.adobe.com/photoshop/kb/error-install-printer-photoshop-cs4.html
        see >Solution 7: Create a different user account and run Photoshop as that user.
Some of the (following) procedures may not be necessary, but the core solution is in there. . .
    Mac OS X v10.5 or later >System Preferences >Accounts >Guest Account (sharing only) >Allow guests to log in to this computer >Automatic Login (for Administrator, still active - optional) >then log out of the (main/administrator) account >then Log in to the guest account >go to the applications folder (in the guest account) >open Photoshop >create a new simple document (example: create one text letter) >Print. . . (in this situation Print: Page Setup. . . the dialog panel opens [remember: this is the error problem in the main account]) >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >Log out (of the Guest account) >Log in to your regular (main/administrator) account >the Guest account can now be deactivated (optional) >open Photoshop (in your main account) >test print a simple document >the (Print: Page Setup. . .) dialog panel now opens >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >the (Print: Page Setup. . . dialog panel will not open) problem is repaired. Bye for now, M_L_R

Standard 'X' in a modal dialog box not working

Hi,
I have created a module pool and calling screen from main screen using Call screen.... Starting... ending... statement.
It is a modal dialog box screen. As a standard a [X] appears on top right corner. But when I click it doesn't work. it does not even fire PBO. How can I make it work?

Hi,
Set next screen as 0, not the screen itself. Then you are able to close it this way.
Regards
Marcin
I was wrong, this will only close the modal box each time after the dialog step is completed. To activate this magic 'X' (allow closing the window with ALT+F4) in PBO set status (type dialog box ) and activate CANCEL and CONTINUE buttons. Now when you try closing the window either by CANCEL button or using X, sy-ucomm (ok_code of the screen) will store CANCEL function code. This way you can simply say LEAVE SCREEN . That works fine, I checked.
Regards
Marcin
Edited by: Marcin Pciak on Mar 17, 2009 11:16 PM

Return results from custom dialog box not visibly updating field value

I have a form with custom dialog boxes (execDialog) for data entry. The dialog box is being called from the Entry event successfully. I also have it called from the Click event. So, here's what I get:
1. On entering the field, I get the dialog box pop up, I select a value, it visibly changes the field raw value and leaves focus in the field.
2. If I exit the field and re-enter, it also works as in point 1 (as expected)
3. If, while focus is already in the field, I click in the field, I get the dialog box, as expected, but after selecting a value from the dialog, the field raw value DOES NOT VISIBLY change until I exit the field! It's kind of like the click event is working in conjunction with the Exit event. This is totally counter-intuitive for a production form that is being designed for the general populace.
Anyone had any experience with this?
Cheers,
Marty.

Thom Parker answered this here: http://forums.adobe.com/message/2614570#2614570
Answer copied below:
"The problem is that when the focus is on the text box
it's in edit mode. It's only displaying the value interactively entered by
the user, or as a consequence of the change event. What you need to do is
force the focus off of the text box in code. You can do a little trick
where you bounce it to a tiny transparent field, which then bounds the focus
back so it doesn't look like the focus changed."
What I ended up doing was calling up the dialog box, then using setfocus with no parameters to remove focus from the field, as follows:
this.rawValue = this.dialogBoxFunction(this.rawValue); // passing current value so dialog box defaults to that value
xfa.host.setFocus();
Cheers,
Marty.

How to make yellow dialog box not come up when I mouse over tabs?

I hate the little small yellow background colored dialog box that pops up when you mouse over tabs on Firefox on Mac.
The reason why this is an in convenience on the Firefox in Mac is when a dialog box comes up and you minimize Firefox the dialog box stays there on the screen, so you have to bring Firefox to the front and then mouse over it til the box go's away, and then finally you can minimize Firefox without having the dialog box stay on your screen.
To negate this problem I want to know if their is a way for me to disable that dialog box from coming up at all. It also comes up when I mouse over my all in one sidebar add on and I have noticed it when you mouseover links on certain sites, like in Pandora when I am mousing over the different artists in my list the little box comes up, again it's not needed and very annoying.

you must modify '''browser.chrome.toolbar_tips'''
type in the address bar '''about:config'''
then press the button''' i'll be careful i promise'''
then type in the bar '''browser.chrome.toolbar_tips'''
then '''Double-click''' on it, to make it''' false'''
exit firefox and restart-it.
See for more info : [http://kb.mozillazine.org/Browser.chrome.toolbar_tips Browser.chrome.toolbar tips ]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

BPS_WB: Please Wait Dialog Box not Displaying correctly???

When we switched our Planning Interfaces to using the New Planning Interface Design the Please Wiat Dialog Box does not display correctly.
When a Request is fired and the client is waiting for the Response all that shows is a white block in the middle of the screen with no dialog screen or other information.
It maybe associated with the following:
function bpsOpenURLSelf(doIt, url)
      if (doIt) {
        try {
            document.body.style.cursor = "wait"; // works only in IE
        } catch (ex) {} // ignore
        open(url,'_self');
      // note: function with doIt==false is used to check
      //       existence of the opener window
Or it may be associated with a CSS issue?
I am currently using IE 6.0.2900.2180.
Any thoughts would be appreciated!
Thanks, ATC

Hi Alan,
please implement SAP note 845305.
Regards
Marc
SAP NetWeaver RIG

Modeless Dialog Box Not Displaying Contents

I have created a simple modeless dialog box. Although the dialog box and title appear, the contents (a label) do not appear. The dialog box does display correctly if the dialog box is switched to a modal box.
I got into this problem because I also cannot get labels to change after their initial display on the main frame. I've tried repaint() and Thread.sleep().
Please help me, I am a newbie to Java.
Sincerely,
John

I actually had a similar problem with a JDialog containing only a progress bar, which ended up being a problem with Swing rather than my code (the bug report has already been filed). Adding a second component to the dialog fixed the problem, counterintuitive as that seems. Try it and see if that helps... If the label is a JLabel, you might try calling revalidate() on it to get the text to update.
Ian

DW Site Setup Dialog Boxes not editable

Similar Messages

Maybe you are looking for