DW8.02 Dates Problem

I just retrieved a client's database and after it downloaded
to my tablet pc (WinXP Tablet PC edition), it shows the date for
the database -on my local site - as 3-27-1914. (Imagine the
Twilight Zone music now).
Similarly, I can put a file and then days later, when I have
edited that file and "put" again, I get a message that the one on
the server is newer than the one I'm putting. This is not true.
I've used DW since the first version and I believe DW8 is the
first time I've seen this behavior. It also happens on my desktop
(Win XP Pro).
I own the server. The time on it is correct. And my laptop
and my desktop are never more than a minute off from the Atomic
time clock I have. And if they do get off, I correct them.
I am using DW8.02 btw.
My first posting said 8.01 but that was a typo.
Any ideas?
Thanks,
Tex

> DW 8.02 changes all the ASP code that it has always used
to insert or
> update
> records when you use the behaviours.
> So if you had a page that was working fine and you open
it in 8.02 and
> double
> click the insert record extension, then close it without
changing
> anything, all
> the code on the page changes.
OK, but that shouldn't affect Safari at all, since that's all
server-side
code.
I think the full story is that DW updated some code that
wasn't communicated
to all of the extension developers.
As such, a lot of extensions weren't compatible with what DW
was doing.
In the end, this is just another argument to not depend on
some other
software writing your code for you ;o)
-Darrel

Similar Messages

Help needed with missing data problem in CRVS2010

We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
I think I have identified two potential issues that document the possibility of data not being included in the report.
The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
Is this related to ADAPT01483793? Will it be fixed in service pack 2?
If more details are needed, I would be happy to provide a sample report with stored data.

Hi Don,
Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also.
There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
Don
Edited by: Don Williams on Oct 26, 2011 7:40 AM

Clearing of Balance in GR/IR clearing account due to date problem

>Hi to All,
>The scenario is like this :-
>The client is making back dated entries for quarter between 01.04.2008 to 30.06.2008 in SAP in July 2008 as the system is getting implemented now. He wants to regularise all the transactions in SAP from 01/04/2008.
>The users entering the data were new and hence though the miro and payment entries were made by F&A in back date. The Purchase Orders and the GRs were prepared in the current date of July 2008.
>Because of this date problem the GR/IR clearing account is having balance in it, which should have been clear after the processing of the miro document.
>The documents were handed over to f&a after preparation of GR in the systems for Invoice processing through MIRO.
>Can anyone plz give a solution to clear the balance GR/IR clearing account.
>Thanks in advance.
>Ashutosh M Joglekar.

Hi Muthuraman,
No need to clear any thing for PO pending items.
Regards
Gitesh

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

I never used icloud before so there is no data to back up from. I just spoke to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
Renee

Will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

Chances are the 2g itouch will not be included in the update. Also no one yet knows if it will be fixed in the next firmware but apple has said they know of this bug.

A Full DTP is converted into delta DTP and facing some data problem

Recently Full DTP(DSO to DSO) is converted into delta DTP , we are facing some data problem in first request.Some data in D2 are not updated properly after just converted in full to delta. Please let me know if you have any idea.
Example :
DSO : D1
DSO : D2
Previously FULL DTP D1->D2
Now Delta DTP D1->D2

Hi,
First time run of delta DTP will extract all the records from the source...
As u have already run the Full load and followed by delta,i guess u can use direct change log option...
rgds,

Parsing Date Problem

I have date problem that I am finding hard to resolve. Please
suggest me what I could do.
I want to parse String Date values of formats like "19 Jun 2003" and
"19/06/2003" to a Date object.
Can I Do it.
Thanking in Advance.

Sure. See SimpleDateFormat#parse.
Kind regards,
Levi

[JHS10.1.3] Date problem

Running into a date problem for a forms migration.
I have a date field in the database, normal date field.
The users want to be able to search on partial dates.
So adding a between on this field will only generate two date selectors, which is not what they want.
The format is like a year field, week field, day field.
I could modify the query to return three extra numeric fields which convert the date to the right format ('yyyy', 'wi', 'dd' ) and then to number and generatie 3 between fields for this.
This will generate the right layout, 6 input fields for a year from/to week from/to day from/to
But the query will be like (year between x and x) and (week between x and x) and day (between x and x)
This will not produce the right results.
What is possible is a string manipulation of the whereclase in the method getViewCriteriaClause()
And see if any/all of the fields are filled and build the query there, but this is not a 'clean' solution.
Any idea on how I can solve this? Basicly a date field in the database, user wants to search that date field on year/week/day between year/week/day or a partial of that.
This is the way it used to be in the forms application so I really want to give the same functionality with ADF.
Anton

Not sure if I completely understand what you said, but this is what I did ( it seems to work )
All my viewobjects extends a new superviewobjectimp, this class has just 2 setters and getters, one for the datefield I want to search on and one for the partial name I gave the three attributes (<fixed name>Year <fixed name>Week <fixed name>Day).
In the advancedSearch, in the loop trough the attributes I cast the viewobject to this superviewobjectimp. I can now check if the attribute contains the partial name. If this is the case I build my own string and add it to the viewCriteriaMap.
One odd thing I found here is that it refuses to let me add a string like
between to_date( '<startdate>', 'yyyy-mm-dd' ) and to_date( '<enddate>', 'yyyy-mm-dd' )Because if I do this, for some reason the attribute name will be wrapped in a to_char!
If I just leave:
between '<startdate>' and '<enddate>'It works, but I dont feel really safe about that, I would rather use the datecast to be sure.
Any idea how this can be done?
I also used the java Calendar class to transform a yyyy-iw-d to a yyyy-mm-dd because it seems I cant use 'iw' in a to_date(....). This also solved a problem with partial dates, java will autocomplete them for me.
In other words if I only supply the year 2005 to 2006 it will auto search from 2005-1-1 - 2006-1-1, same for weeks.
I have a lot of viewobjects which will require this, I'm trying to make it as solid as I can.
Any suggestions?
Anton

I have a strange 3g data problem.

I have a strange 3g data problem. At home I have zero 3G connectivity even though all bars are showing and says "3G" and wifi is "Off" ... unless I am on the phone and then magically the 3G data connection works perfectly!! Does anyone have any idea what is happening? Also when I bring my phone to my dad's or my friends house the problem disappears!! Is this a hardware or a AT&T network problem? os is 4.3.3
Also called ATT and they said there was no problem with the network and that it was a hardware issue. Also restored the phone several times but the problem did not go away.

OK, no trouble shooting. The first thing I'd attempt is restarting in Safe Mode. If you still don't have luck try doing both a SMC and PRAM reset, it wouldn't hurt to do the SMC reset a couple of times. If still no luck let us know.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Interpreting error message; insight into data problems?

I own a 8310 on AT&T running OS 4.5.011. I have been having intermittent data problems that have gotten worse over the last week; e.g., the connection box autonomously becomes unchecked, the browser cannot find a connection, data randomly goes form GSM to edge and back, Vlingo cannot find its server.
AT&T Service suggested a "Master Reset" and I have backed up my data with BB Desktop Mgr. as a first step. I got the following error message:
"Uncaught Exception:Application net_rim_bb_app(53) is not responding; process terminated"
Please help me 1) translate and 2) does that suggest a source of my problems?
Regards
Rob

You need to enclose carData[0],carData[1] etc in single quotes, if they are String(s). Otherwise you can use PreparedStatement.
PreparedStatement ps = con.prepareStatement("Insert into car values(22 questions marks)");
ps.setInt(1,temp);
for(int i=0;i<21;i++) ps.setString(i+2,carData[ i ]);
int count=ps.executeUpdate();
Sudha

Serious date problem

I am using Form 6i.
I am getting serious date problem.
The MM/DD/RRRR is converted to DD/MM/RRRR and the result is false record.
How to avoid this serious problem. I am very shocked to find this error after few hours of brainstorming session.
I am using following query to create cursor
[htm]     CURSOR cur_first IS SELECT      a.item_code,
     b.item_description,
     a.lot_no,
     d.name model,
     c.vendname,
     date_of_purchase,
     warrenty_upto,
     quentaty,
     rate,
     pc_type,
     TO_DATE(decode(warrenty_flag_yn,
                    'W', TO_DATE(warrenty_upto),
                    'A', TO_DATE('31-MAR-'||v_year),
                    'X', TO_DATE('31-MAR-'||v_year)),'DD-MM-RR') AS amc_date
     FROM      pc_item_procurement_history a,
                    pc_item_master b,
                    pc_vendor_master c,
                    pc_model_master d
     WHERE a.item_code= b.item_code
     AND a.modelcode=d.modelcode
     AND a.vendcode=c.vendcode
     AND (b.item_description LIKE '%'||:blk_main.item_name||'%' OR :blk_main.item_name IS NULL)
     AND (TO_DATE(a.warrenty_upto,'DD-MM-RR') <= :blk_main.to_date OR :blk_main.to_date IS NULL)
     AND warrenty_flag_yn='W'
     ORDER BY b.item_description;
/pre][html]
Thanks and regards,
Vikas

I've just noticed something in the where clause that makes all this a lot easier.
     CURSOR cur_first IS SELECT      a.item_code,
     b.item_description,
     a.lot_no,
     d.name model,
     c.vendname,
     date_of_purchase,
     warrenty_upto,
     quentaty,
     rate,
     pc_type,
     warrenty_upto AS amc_date
     FROM      pc_item_procurement_history a,
                    pc_item_master b,
                    pc_vendor_master c,
                    pc_model_master d
     WHERE a.item_code= b.item_code
     AND a.modelcode=d.modelcode
     AND a.vendcode=c.vendcode
     AND (b.item_description LIKE '%'||:blk_main.item_name||'%' OR :blk_main.item_name IS NULL)
     AND (a.warrenty_upto <= :blk_main.to_date OR :blk_main.to_date IS NULL)
     AND warrenty_flag_yn='W'
     ORDER BY b.item_description;BUT...
Is Warrenty_upto really a date column? You say it is "stored as m/d/yyyy" but a date is not stored with a format in oracle - it's just a date and the format is applied when you retrieve the data.
In sql*plus if you Describe the table you can see the column type. If you select the data you only ever get a string.
I'm assuming :blk_main.to_date is a date.

HELP!!!! DATE PROBLEM

I have a procedure like this. But even though the value of both mdate and mlistdate_cur.leave_from values are the same , the if condition is not validated. Please help!!!!
PROCEDURE leave_check ( MDATE IN DATE, PDATE OUT DATE) IS
testflag char(1) := 'N';
cursor listdate_cur is
select leave_from,leave_to,type_of_leave from vacation_list;
BEGIN
     for mlistdate_Cur in listdate_cur loop
     if (mdate = trunc(mlistdate_cur.leave_from) ) then
          pdate := mlistdate_cur.leave_to + 15;
                         testflag := 'Y';
     elsif ( mdate >= trunc(mlistdate_cur.leave_from)) and (mdate <= trunc(mlistdate_cur.leave_to)) then
               pdate := mlistdate_cur.leave_to + 15;
                         testflag := 'Y';
     end if;
end loop;
if testflag = 'N' then
          pdate := mdate;
end if;
END;

Hello
Welcome to the club of Venezuelan Mac owners with date problems
There's a thread here about the same problem
http://discussions.apple.com/message.jspa?messageID=6399776#6399776
Please add your message to that thread, so there's a common record of this problem
Omar Vasquez

Refresh package with 'From-Date' Problem

Hi All,
I just ran into configuring the Analyze and Specify 'From-Date' problem fro refreshing package. I've completed the normal package with the starting date 8/30/2008. Now I am trying to go back and copy and select from 7/30/2008 for the new run during that posting period. I am not if this is possible but it doesn't allow me to choose any of the option. If I choose Analyse and deine new 'From-Date' when the screen popup, then choose 7/30, the date is not transfer to the Chosen From Date field at all, and execute. The system will display he error with "Evaluation failed. Required customising data no available". Basically, it doesn't allow me to choose any date.
Do any of you experiencing the same problem. Or did I miss any step from the first run?
Thanks,
Tai

Hi Tai,
Implement the note 1180500 - Activity TD01P_FROM_RFH runs into error in a refresh package.
Regards,
Santosh

Live Data / Problem with file permissions

Just trying out an old version of Dreamweaver MX 2004. I am
using my webhosting service for remote server/testing server
duties. It is running PHP 4.3.10 and MySQL 3.23.58. I was able to
set up the database connection and test-retrieve a recordset with
no problems. In following the tutorial I found that Livedata
wouldn't work, it just giving me a warning about file permissions
being wrong. It turns out that when Dreamweaver creates a temporary
file of the work-in-progress to upload to the remote server the
file is created on the server with owner=rw, group=rw, world=r
which explains why it won't run - group has to be set to group=r.
The file is created on the fly and then immediately deleted by
Dreamweaver so it is impossible to manually set the permission on
the server and probably fairly pointless too.
I tried just saving the file and previewing in the browser
which again causes it to be uploaded to the remote server. The
first time this resulted in the browser offering a file download
box instead of running the page. The reason is - again - that
Dreamweaver is setting the uploaded file permissions to include
group=rw. If I manually set the permission for group to group=r it
runs fine.
It turns out that Dreamweaver is always setting the file
permissions on file uploads (checked php and html) to the
remote/testing server to include group=rw. Once I set it manually
on the remote/testing server to group=r for a php file everything
is fine and subsequent uploads of the same file do not change it
again.
I checked with the webhosting company and their second-line
have reported back to me that the default file permission they set
on uploaded files includes group=r so it must be DW that is causing
the problem by setting group=rw the first time. I confirmed this by
using WS-FTP to upload the same file (renamed) to the same target
directory and the permissions set were owner=rw, group=r, world=r.
So
Can anyone please tell me how to change the permissions DW
sets on files written to a remote server because I have spent
countless hours on it without success. From looking at other posts
in this forum it could be that other users are hitting the same
kind of problem with DW8

Stop using Live Data with a hosting account. Set up PHP and
MySQL locally on
your machine. That is how it's supposed to work. You
shouldn't test files on
the fly on a host as you write them. Change your test account
in DW to use
the local server. Upload your files to your remote server
after they are
fully tested.
Tom Muck
http://www.tom-muck.com/
"nigelssuk" <[email protected]> wrote in
message
news:[email protected]...
> Just trying out an old version of Dreamweaver MX 2004. I
am using my
> webhosting
> service for remote server/testing server duties. It is
running PHP 4.3.10
> and
> MySQL 3.23.58. I was able to set up the database
connection and
> test-retrieve a
> recordset with no problems. In following the tutorial I
found that
> Livedata
> wouldn't work, it just giving me a warning about file
permissions being
> wrong.
> It turns out that when Dreamweaver creates a temporary
file of the
> work-in-progress to upload to the remote server the file
is created on the
> server with owner=rw, group=rw, world=r which explains
why it won't run -
> group
> has to be set to group=r. The file is created on the fly
and then
> immediately
> deleted by Dreamweaver so it is impossible to manually
set the permission
> on
> the server and probably fairly pointless too.
>
> I tried just saving the file and previewing in the
browser which again
> causes
> it to be uploaded to the remote server. The first time
this resulted in
> the
> browser offering a file download box instead of running
the page. The
> reason is
> - again - that Dreamweaver is setting the uploaded file
permissions to
> include
> group=rw. If I manually set the permission for group to
group=r it runs
> fine.
>
> It turns out that Dreamweaver is always setting the file
permissions on
> file
> uploads (checked php and html) to the remote/testing
server to include
> group=rw. Once I set it manually on the remote/testing
server to group=r
> for a
> php file everything is fine and subsequent uploads of
the same file do not
> change it again.
>
> I checked with the webhosting company and their
second-line have reported
> back
> to me that the default file permission they set on
uploaded files includes
> group=r so it must be DW that is causing the problem by
setting group=rw
> the
> first time. I confirmed this by using WS-FTP to upload
the same file
> (renamed)
> to the same target directory and the permissions set
were owner=rw,
> group=r,
> world=r.
>
> So
>
> Can anyone please tell me how to change the permissions
DW sets on files
> written to a remote server because I have spent
countless hours on it
> without
> success. From looking at other posts in this forum it
could be that other
> users
> are hitting the same kind of problem with DW8
>

Data problem from DSO to cube

hi
i am facing data from problem from dso to cube
i am getting daat into dso
plant   material doc_num itemno qty
p1      m1           1              1         10
p1      m1           1               2         20
dso i am uisng key fields
doc_no
item_no
doc_year
data fields
material
plant
qty
while loading data into cube
its showing only
p1 m1 1 2 20
item 1 is missing
there is no iten num filed in my target field?
ple let me know ur idea.

Hi,
The problem is in your ODS/DSO.
In your ODS you have 'Doc_num' as key field.
For both Items 1 & 2, you have same key field ( Doc_Num) Value.
So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
Hope this helps.
Cheers
Praveen

DW8.02 Dates Problem

Similar Messages

Maybe you are looking for