Dw8 and fireworks CS3

hi everyone!
i d like to ask you if there is a problem in using
dreamweaver 8 + fireworks CS3.
Does these cooperate correctly?
Thanks!

They are not the same. DWCS3 is DW9.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pdimitri" <[email protected]> wrote in
message
news:f0agjl$e2i$[email protected]..
> hi everyone!
> i d like to ask you if the dreamweaver 8 and dw cs3 are
different
> versions.
> i ve already installed dw8 on my computer.
> i d like to download and print the documentation for dw8
but i only find
> the dw cs3 documentation here.
> do you know where can i find it?
>
> and something else
> what is the dreamweaver developer toolbox?
>
> Thanks!
>

Similar Messages

Use DW8 and DW-CS3 on same machine

I have DW8, and bought CS3 upgrade (actually, Studio 8 to CS3
Web Standard).
I need to be able to keep DW8 as is, with all extensions.
Will installation of the CS3 upgrade screw up my current Studio 8
installation/configuration?

Tom:
If I use your first method listed, will I then be able to
install the
updated version of the extension?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Tom Muck" <[email protected]> wrote in
message
news:f08mvv$75o$[email protected]..
> You can run them side by side, but you cannot run
different extensions on
> both. There is only one Extension Manager cache, and it
contains info
> about one set of extensions.
>
> I wrote an article that details some problems with the
Extension Manager:
>
http://www.tom-muck.com/articles/ProperCareAndFeedingOfTheExtensionManager/
>
>
> --
> --
> Tom Muck
> co-author Dreamweaver MX 2004: The Complete Reference
>
http://www.tom-muck.com/
>
> Cartweaver Development Team
>
http://www.cartweaver.com
>
> Extending Knowledge Daily
>
http://www.communitymx.com/
>
>
> "timrand" <[email protected]> wrote in
message
> news:f06uet$qc9$[email protected]..
>>I have DW8, and bought CS3 upgrade (actually, Studio
8 to CS3 Web
>>Standard).
>>
>> I need to be able to keep DW8 as is, with all
extensions. Will
>> installation
>> of the CS3 upgrade screw up my current Studio 8
>> installation/configuration?
>>
>>
>>
>
>

Vista and Fireworks CS3

I just bought a new desktop (Vista Home Premium, Pentium Dual
Core @1.6, 2024 ram, HDD 320 @ 7200) and installed CS3 Web Premium
(Which worked well on my slower XP Pro laptop). Fireworks simply
will not work. I've read some of the posts related to this issue
and was unsure of where to begin trying to resolve this. I
purchased the student edition and don't think that I get free*
support. Any help would be appreciated.

It has always worked fine on my Vista Ultimate box, so I'm
not sure where to
start helping you. What are the symptoms?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"mcmono50" <[email protected]> wrote in
message
news:fogma8$6g5$[email protected]..
>I just bought a new desktop (Vista Home Premium, Pentium
Dual Core @1.6,
>2024
> ram, HDD 320 @ 7200) and installed CS3 Web Premium
(Which worked well on
> my
> slower XP Pro laptop). Fireworks simply will not work.
I've read some of
> the
> posts related to this issue and was unsure of where to
begin trying to
> resolve
> this. I purchased the student edition and don't think
that I get free*
> support.
> Any help would be appreciated.
>
>
>

Windows 7 and Fireworks CS3

Was anyone here able to run Fireworks CS3 flawlessly on
Windows 7? It has very strange behavior. I was able to get it run
for the first time after I have waited for more than hour to start
it. Then I activated it and was able to work with it without
problems. After restart it takes again forever to start. It looks
to me like there is no problem with fireworks but with some code
which is checking if the copy is legal and this is causing the
delay. I used FW very occasionally just to create some web
graphics, i bought FW8 and then i bought upgrade just to be able to
run it on windows vista. i really dont want to buy upgrade again to
use it on windows 7 just once a month. Any help appreciated.
update
Now it stopped working and I have got this message
Licensing for this product has stopped working.
You cannot use this product at this time. You must repair the
problem by uninstalling and then reinstalling this product or
contacting your IT administrator or Adobe customer support for
help.

On Windows 7? That's a beta product. If you want to use
Windows 7 you can expect problems as the purpose of the beta test
is to
find problems. CS3 works well on Vista. If you need to work
productively, use a released product, not a beta.
That said, I had the same error on Vista a couple of weeks
ago. Something hung in Fireworks and not only would Fireworks not
start, none of my other CS3 apps (on Vista) would start. I got the
same error message in each. It is something in the licensing
product that Adobe uses. I searched Google for the text of the
error message and found a KB article that eventually got things
working.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
I had to run the utility all three times, and then keep on
going through the other steps of moving off file folders before my
apps started working again. It was frustrating for the to stop
working, like that, and I kept being disappointed at having to move
on to the next "if that didn't work, do this." But at least they're
working again!

Dw8 and dw CS3

hi everyone!
i d like to ask you if the dreamweaver 8 and dw cs3 are
different versions.
i ve already installed dw8 on my computer.
i d like to download and print the documentation for dw8 but
i only find
the dw cs3 documentation here.
do you know where can i find it?
and something else
what is the dreamweaver developer toolbox?
Thanks!

They are not the same. DWCS3 is DW9.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pdimitri" <[email protected]> wrote in
message
news:f0agjl$e2i$[email protected]..
> hi everyone!
> i d like to ask you if the dreamweaver 8 and dw cs3 are
different
> versions.
> i ve already installed dw8 on my computer.
> i d like to download and print the documentation for dw8
but i only find
> the dw cs3 documentation here.
> do you know where can i find it?
>
> and something else
> what is the dreamweaver developer toolbox?
>
> Thanks!
>

Editing a Web Photo Album Created With Dreamweaver CS3 and Fireworks CS3

I created a web photo album with DW CS3 and FW CS3. I want to
add and delete some of the photos in the collection. So far, the
only way I have been able to do this is to recreate the whole thing
from scratch with all the correct pictures in the target folder. Is
there an easier way?

I could be wrong (we only test Adobe widgets for the quality
of their output
code, not for features, or lack of features) but recreation,
as Patty said,
might be the only way. If you have a development budget, you
might want to
take a look at some commercial tools that would have the
features and
capabilities you want or need.
Al Sparber - PVII
http://www.projectseven.com
Fully Automated Menu Systems | Galleries | Widgets
Lightshow Magic: the new wave...
"AmateurWebMaster" <[email protected]> wrote
in message
news:g6kf6v$o1l$[email protected]..
>I created a web photo album with DW CS3 and FW CS3. I
want to add and
>delete
> some of the photos in the collection. So far, the only
way I have been
> able to
> do this is to recreate the whole thing from scratch with
all the correct
> pictures in the target folder. Is there an easier way?
>

Installing DW8 and DW CS3

I have some extensions that does not work with DW CS3, so I
would like to keep using DW 8, but I would like to get familiar
with DW CS3 also. How can I install both on the same machine
without messing up the extensions? I am Mac OSX.
Thanks in advance for your time.

I installed Dreamweaver CS3, updated it. Then I installed
Dreamweaver 8. They are both in different folders and so is their
own extension managers. Now when I open the extension manager for
DW8, I cannot see the Dreamweaver 8 in the 'Active Product'
drop-down box. When I select the mxp and have it open it with DW 8
Extension manager it says that I need to have DW MX or greater
installed. I have both installed, but no go.
Any insight on how you got both to work simultaneously
?

Dreamweaver and Fireworks not working correctly

I am taking a DW8 class. I have MANY photos I want to use
fireworks for. Installed free 30 trial of DW8 and Fireworks from my
books CD. Did what DW8 said in creating web photo. Used Fireworks
BUT when I clicked on the photo to enlarge I got the black box
around it saying I could enlarge it NOT view it like a picture
show. What I want is to have all photos per event show up and then
let people click on the photo to see either that ONE OR ALL but
full screen. What do I need to do? Should I try downloading the 30
trial from this site for both programs instead of the CD from the
DW8 instruction book?

Hi
The software crashes or freezes. Fireworks will only let me save an item twice, after that, I get an error message that tells me I do not have permission to save that item because it is locked, so then have to save into a different folder or directory, crazy.
When trying to uninstall in control panel, will not open the uninstall, think some kind of permission problem.
I may just do a system restore back to how the computer was purchased, then install all programs again............. See if that works first. None of the other programs are doing this; however, just Adobe, so not sure what happened, just started working like this out of the blue.............?
I am going into a long meeting this morning, so can only work on it in the afternoon.
Thanks for replying...........
Tracey
Sent from Samsung tablet

Fireworks CS3 app is slow

I have now had to re-install Fireworks MX as this is the only
Fireworks application that responds with any speed.
I've tried Fireworks MX 2004, Fireworks 8 and Fireworks CS3
all 3 of which are painfully slow when swapping between
applications. I have to wait around 10 seconds for it to respond
before I can continue working.
I've trawled the web for a solution to no avail.
I'm running:
Dell Dimension 8400
Windows XP SP3
3.25GB of RAM
Radeon X800 SE video card
Any other app in the CS3 range is fine, I've tried disabling
anti-virus, removing services, changing compatibility modes and
numerous other things to no avail.
Any help much appreciated.

cmakin wrote:
> I have now had to re-install Fireworks MX as this is the
only Fireworks
> application that responds with any speed.
>
> I've tried Fireworks MX 2004, Fireworks 8 and Fireworks
CS3 all 3 of which are
> painfully slow when swapping between applications. I
have to wait around 10
> seconds for it to respond before I can continue working.
>
> I've trawled the web for a solution to no avail.
> I'm running:
> Dell Dimension 8400
> Windows XP SP3
> 3.25GB of RAM
> Radeon X800 SE video card
>
> Any other app in the CS3 range is fine, I've tried
disabling anti-virus,
> removing services, changing compatibility modes and
numerous other things to no
> avail.
>
> Any help much appreciated.
>
>
I'm on XP SP2 and don't find the app particularly slow. What
size files
are you working with?
You might want to give the new Fireworks Public Beta a try.
One focus
for the beta was to improve overall performance.
You can find the beta at labs.adobe.com
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Fireworks CS3 WIll Not Start Up

I have downloaded both the Dreamweaver and Fireworks CS3
trials and have been using them both for a couple of days without
any problems. Suddenly when starting up Fireworks (it starts to
load the program) then comes up with the following pop up message
box. "Your user privileges do not allow Fireworks to update your
registry. Launch and edit with Dreamweaver will not work properly
until Fireworks is launched while using Administrative privileges.
The pop up box then freezes and I am unable to close it down.
If I go into task manager and end program, it then finishes loading
and shut down.
I am running Vista Ultimate and my account is the admin
account and this has only just started to happen.
Any ideas anyone?

If you are unable/unwilling to allow the user to "run as administrator", there is another way.
A security concern could be that the file->open dialogue retains the given administrative rights of whatever account was used for "run as administrator". This can be exploited by the lesser user to gain access to folders otherwise restricted.
The most hassle free trick is to give the user full rights to the registry key, that Fireworks wants to write to.
(In the future, use ProcessMonitor from Microsoft to detect what a program tries to access and if it is successfull or not. That's how I found this registry key)
Add FULL rights on this registry key to "Everyone"
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\Fireworks.exe
That fixed the problem nicely for me.
Also new users will not be required to "run as administrator", as this is valid for all users.
True.. it gives the user full access to that specific registry key, but that is at least much less dangerous than giving full access to the entire system.
You can play around with lesser access than Full, but I will not spend more time figuring out the lowest level of access that will permit Fireworks to run.
Hope this trick works for you too
-Lord HellFire
'Eternal Life or your money back'

Dreamweaver and Fireworks Trial Conversion

I downloaded a trial version of Dreamweaver CS3 and Fireworks
CS3. I have purchased Creative Suite Web Standard. Do I have to
uninstall my trial versions?

Try using the serial number from your purchase, thought I'm
not 100% sure
whether it will work because you purchased a 'package'. If
the Serial
number doesn't 'take', then you would need to install the
software via the
package you purchased and then use the serial number.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"laserweb" <[email protected]> wrote in
message
news:f70uar$9r8$[email protected]..
>I downloaded a trial version of Dreamweaver CS3 and
Fireworks CS3. I have
>purchased Creative Suite Web Standard. Do I have to
uninstall my trial
>versions?

Fireworks CS3 - Internal error when save as JPEG and batch mode

Dears,
I am being in trouble for all along these 7 days due to this
error. I hope that someone may help me.
After upgrading to CS3 from Fireworks 8, I am having this
"internal error message" both when the preview for a JPEG export
format is chosen (it works OK when the export format is either GIF
or PNG) and when I work with batch operation.
Everything is OK if I run Fireworks either as "root" user or
as "adminplus" user ("adminplus" is the username of an extra user
with administration privileges I created for testing).
My operating system is MacOsX 10.5.4 and my computer is a
MacBook2,1 (MacBook with Intel Core 2 Duo 2 GHz with 2GB RAM and a
brand new 186,31 GB Hitachi Journaled HFS+ HD with 100GB free).
I tried in many way to get the valuable differences in the
Library files and privileges (looking to many forums, it seems this
may be the cause, also confirmed by the fact that other users works
fine) but I didn't get any special differences.
I tried to trash the preferences but still the error is
present.
I tried with the master temporary file in MacOsX with
terminal command "stat -x $TMPDIR" checked against command "id".
User and privileges were OK but still the "internal error" was
there.
I tried with a simple reinstall for Fireworks CS3 and with a
full reinstall of the full CS3 web standard suite and, moreover,
uninstalling and reinstalling everything.
I also tried with Fireworks 8 which was not removed by the
upgrade and it has the same problems.
May I receive a competent suggestion about how to diagnosis
and solve the problem?
Many thanks,
Carmine

OK. I solved it!
Whoever will have the same problem may ask how I solved. It
is not complicated but it is a long story. I succeed without any
reinstall of operating system as suggested by the ADOBE support, in
case any of the suggestions found everywhere, will give no result.
I will be happy to explain what to do to whoever will need
it.
My very best wishes,
Carmine

Fireworks CS3 and Dreamweaver 8

I own Dreamweaver 8 but not Fireworks 8, and I don't
particularly want to upgrade Dreamweaver to build decent websites
using Fireworks CS3. So has anyone imported Fireworks PNGs,
particularly of the sliced variety, into Dreamweaver 8? Any
problems?

princesspurple wrote:
> I own Dreamweaver 8 but not Fireworks 8, and I don't
particularly want to
> upgrade Dreamweaver to build decent websites using
Fireworks. So has anyone
> imported Fireworks PNGs, particularly of the sliced
variety, into Dreamweaver
> 8? Any problems?
YOu need to export the files from Fireworks to your
Dreamweaver site,
then if you want to use the Fireworks HTML, use the
Dreamweaver Insert >
Image Objects > Fireworks HTml feature.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Fireworks CS3 and Win 7

I just upgraded to Win7 and everything in Fireworks CS3 seems to be working except the brush tool. When trying to paint the cursor is irratic, moves slowing across the picture and I can't control the speed of the brush tool. Is anybody else having this problem and if so do you have a work around?

This was a problem in Vista and the workaround there is to turn off the Aero theme for Fireworks. (CS3 Bitmap tools and Aero are not happy together.)
Not sure if Win7 has the same settings, but it should. Try this: go to the Fireworks folder, right-click on Fireworks.exe, and select Properties. If there's a Compatibility tab, first try setting it to "Disable desktop composition." (Mine's also set to run in XP compatibility mode, but maybe I did that first, it wasn't the ticket, and I added the "Disable desktop composition" checkbox.)
When you start or close Fireworks, your screen might flicker to black as Aero is turned off and on, but otherwise, everything should work okay.

PSD source file for animated GIF's - Fireworks CS3

hi
i've upgraded to Web Premium Suite CS3.
Q: i have several PSD source file for animated GIF's created
with ImageReday.
how can i open/iomport/convert it in/to Fireworks CS3 without
looing the "animation"
many thanks
Ueli

ugisiger wrote:
> hi
> no any extras. simply 5 layers "distributed" on the
timeline.
> if i open a "animated" psd, so i get a file with the
layers and one frame, but
> loosing animation stuff like "when show witch layer an
for how long"
> -> there is no conversion to FW frames.
>
> Ueli
>
I don't do animations in PS or IR, but if you like, send me
the file
and I'll see if I can figure something out.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

Dw8 and fireworks CS3

Similar Messages

Maybe you are looking for