DW8 does not save the FTP login info

Since I upgraded to DW8 I have to retype all the FTP login
information every time I try to connect to a remote site.
The "save" check box is checked. I have downloaded the latest
updates. My operating system is xp. What can I do to make DW save
the information?

Updating to 8.0.2 does the job.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"magoo" <[email protected]> wrote in message
news:eu8muc$seu$[email protected]..
> elliejo <[email protected]> wrote:
>> Since I upgraded to DW8 I have to retype all the FTP
login
>> information every time I try to connect to a remote
site.
>> The "save" check box is checked. I have downloaded
the latest
>> updates. My operating system is xp. What can I do to
make DW save the
>> information?
>
> Let me guess: You updated to Internet Explorer 7?
> AFAIK there is no sulution yet. Either rollback to IE6,
or retype your FTP
> data ;-(
>
> --
> Kind regards,
> magoo
>
>
>

Similar Messages

Logging in to remote site, reset safari does not clear the user login info?

I'm logging in to a remote site with a 2 step login. Authentication then citrix. User info is not cleared in the authentication portion when I reset safari. Must be stored somewhere else. Where should I look?

Launch the Keychain Access application and search for the server name.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Recording does not save the file

We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!

Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick

Why the "Actions" does not save the Overprint Black

Hi!
Ai CC 17.0.0
Why the "Actions" does not save the Overprint Black?
I can not create an action that will automate this time a very common activity?
Why?
Best Regards!

I was just able to. I am in Illustrator 6 on a Mac OS 10.6. I started a new action and went through the menu just like your screen shot, chose my options and clicked ok, then stopped recording the action.
I found to use the action I had to have something selected.
I see that you are in Illustrator CC, perhaps there is a difference there. But for the record, on my system, it worked.

TS1398 ipod touch does not save the password of the wifi

my ipod touch 4g does not save my home wifi password but in my bussines it does please help

Two things to try:
If your router is set to hide its SSID (network name) then go into the router's administration and change this setting. For some reason, this can cause problems with iOS devices remembering the network password. There's really no need to hide your network name, there are (or were) apps that could show you any and all Wi-Fi networks within range, even if they're hidden.
If you're using WEP encryption, try using WPA2. It is much more secure and seems to play nicer with iOS devices.

Read It Later plugin does not save the tags for web sites all the time

Read It Later does not preserve the tags assigned to websites in some cases. Sometimes I go through the list, assign tags, close the browser hoping it would write all the changes to the internal database (readItLater.sqlite) and after reopening the browser, some sites have the tags and some don't.

@Swarnava. Thank you, but for now I would disregard your response, since I'm not planning to upgrade and I've seen posts where people have the same issues with the latest version of 8.0.1

The jsp file does not open the new login window but opens the source code.....plz help

When i try to log in to the log in link at the site https://efp.bpcl.in the log in page does not open but the firefox wants to ask with which program the firefox should open the file and when we give firefox or internet explorer than it opens the source code.Plz help...

Those files are send as application/octet-stream and that makes Firefox display a download dialog.
http://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types

On saving mail as .rtfd file does not save the attachments.

For a few updates to Leopard now I have had a problem with Mail. If I opt to save with attachments the file is saved as a .rtfd file but when I open the said file in Text Edit there are no photos or whatever the attachment was. I have been saving this way for years and only in the last year or so has this problem arisen. I don't want to save the files as .eml files (which DO save the attachments). Anyone else noticed this problem?

Dear Glyn
you posted this bug Oct 19; it still has not been fixed, Is there any way to push Apple people to stop behaving like windows people ?
I much regret I installed the new systemsoftware ...
What can we do to FIX it - i need the feature and it has a button to include the attachment, so it should work
grrr

Exchange 2013 enable forwarding option does not save the recipient address

Hi,
I am having issue on Exchange 2013 that unable to save forwarding recipient address in mail flow option. While browsing on Forward address and select recipient address it shows the blank and do not show the address.
Can anyone suggest how to save the recipient address in mail flow.
Thanks

Hello Nithyanandham,
I solved the issue that it is IE browser issue. I logged in with FireFox and access the mail flow and entered the recipient forwarding address it saved and email now
sending to the forwarding address.
Thanks for your kind support and help

ADF appl link to SQL database does not save the change

I use SQLJDBC 4 to connect to MS 2008 database. Then I create an simple ADF application with one model and business component that connect to one table. When I run the app. The grid and the detail come up nicely. I can insert new row and modified existing row without error with submit-commit operation. The grid updated with the change. But it did not update the database when I check the data from studio manager. Is there any configuration I am missing so the data are not updated.

Please give us your jdev version...
What exactly do you mean by submit-commit operation?
Have you run the application with jbo.debugoutput=console to see what its send to the server?
Timo

Issues logging data - does not save the correct data

I am having 2 issues:
1. I am having issues with my logging occuring at the right time.
I have a few things occuring based on the state of 'Injection'. In the case of logging, the following needs to happen:
When injection is 'True' nothing should occur. When injection goes 'False', data logging should occur. If my injections are 'continuous' the boolean goes:
True, False, True, False. I would have 2 logging sessions during both 'False' occurrences. What appears to be happening is that the logging occurs during the 'True' state. I am not sure why.
2. The logging needs to save a certain amount of samples to the text file. If my 'False' state lasts for 1 second, I need to have 1000 samples. If 2seconds, 2000 seconds, if 1.5seconds, 1500 samples..you get the idea. At current I am only getting 100 samples at a time, at dt of .1
Code below:

belopsky wrote:
Thanks Dennis.
i seem to have issues w my UI updating when I specifiy samples to read. It appears to lag, which is OK, as long as the timing is still correct..
Can I acquire continuously, without specifing how many samples, but specify how many samples to read?
DAQmx Read will return the number of samples requested immediatly if they are available otherwise it will wait for the number of samples requested to be avilable and return the number of samples requested. This of course, means that the loop will only iterate no faster than "number of samples * Sample rate". (probably what you mistook for "Lag") IF the number of samples requested is not available before the timeout period DAQmx Read will return with the number of samples available and a timeout in the error cluster so your calling code can handle the exception intelegently. If the number of samples requested is -1 DAQmx Read returns the number of samples available now without waiting at all.
Clear?
Jeff

ITunes does not save the changes I make.

Every time I start it it makes me go through the whole accepting the terms of agreement and reminds me that it can get album photo's for me. None of the changes I have made since I upgraded to latest version are saved and I am logged out of iTunes Store every time I close iTunes. I'm not sure if that is supposed to happen, but I doubt it is. Please help me, this is getting on my nerves.

Every time I start it it makes me go through the whole accepting the terms of agreement and reminds me that it can get album photo's for me. None of the changes I have made since I upgraded to latest version are saved and I am logged out of iTunes Store every time I close iTunes. I'm not sure if that is supposed to happen, but I doubt it is. Please help me, this is getting on my nerves.

Firefox 7.1 does not save the tab groups

i have windows 10 and firefox 7.1

'''azizy.aris'''.....I have done EXACTLY what you have said and perhaps it has helped others but it has NOT helped me. Could you perhaps think of anything else that may be causing this??? I was saving them for awhile but all of a sudden it stopped. Do you think it's because I have the Firefox v. 4 Optimized for Yahoo!? I don't remember if it worked prior to me updating to the version for Yahoo or not. Any help you can give me would be GREATLY appreciated!!!
Thank you in advance for all your and anyone else's help.
Christine ♥

Adding a bookmark does not save the bookmark if you press cancel

When i click
bookmarks -> bookmark this page
It comes up with a popup saying "Page Bookmarked". Naturally, I hardly ever want to change the name of my bookmarked items so I click cancel. My bookmark is gone. Either it is getting deleted when i press cancel to the annoying popup that comes up, or its not getting saved in the first place.
I consider this a HCI bug. If you want to argue that this is the correct functionality that you would expect, I must disagree. Bookmarking has always been a single click procedure and I'm not sure why pressing "cancel" would mean the bookmark is not stored. I have lost countless bookmarks from pages that I have thought were bookmarked but then when I tried to access them the next day, they were gone.

Hi Cor-el. Thanks for the tip. I agree with everything else you have said. It is good to have the functionality for accidental bookmarking.
However, my quarm is with the text "Page Bookmarked". Essentially what you have said means that it is actually a lie. It hasnt been bookmarked at all until I press confirm. Perhaps you should change the text that pops up since it is quite misleading. Perhaps "Bookmark Page" or "Page Bookmark" would suit it better. The extra "ed" means that it's actually referring to the verb and not the noun which is why it confuses me.
I know it is a small thing, but it has annoyed me enough times to be bothered to sign up to these forums and ask the question.
Thanks

DW8 does not save the FTP login info

Similar Messages

Maybe you are looking for