DW8 forgets FTP login and password
Each time I open Dreamweaver 8 to work on my site, I have to
re-enter the FTP login and password. This only began happening
recently. I check SAVE box, but DW8 does not save the login or
password ... so I have to re-enter every time. PLEASE advise what
could be causing this. Thank you very, very, very much!
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1219996&enterthread=y
Similar Messages
-
Dreamweaver 8 forgets ftp login and password
I entered my FTP information in Dreamweaver 8's Remote Info
section, and clicked the Save checkbox. When I open Dreamweaver, it
remembers the ftp host, but the login and password are blank. Any
ideas?go to adobe.com site and get the 8.02 update installer.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
FTP login and password are not saved on some sites
On some of my sites the FTP login and password are not saved
(even though the "saved" box is checked). Dreamweaver 8.0 on XP
SP2. I can export the site information and then import the same
file exported and there still will be no login or password placed
in the login or password window. I opened the exported .ste files
in notepad and found the login correct and the password incorrect.
I uninstalled Dreamveaver and reinstalled still same
problem.Ok, I just spent about 3 hours on this. Here's the latest
that I've found. I had looked at the knowledgebase and my registry
matched what was suggested. As this has been an ongoing issue for
me, I thought it was still an issue. Apparently 8.02 did have some
improvements.
I can only guess that many of the 36 sites I have in the Site
Manager lost info before the .02 update.. or I hope so.
I did however discover that there is still what could be
considered a minor bug. I went in to Manage Sites and selected edit
for all of my sites, fixing the ones that had lost their user/pass
info. I'm not positive, but I think only the last edited site kept
it's data.
I discovered after many checks on all the sites, over and
over and over, that it appears that they are now holding the data,
but, if I add the user/pass, I must not only click the OK button to
close that particular site, but I must also click the 'Done' button
before only that one will be saved.
So, I thought I was fixing logins when in fact I was only
fixing one at a time.. Completely closing 'Manage Site' seemed to
hold one new set of login data each time. Seems that it shouldn't
be this way.
But I must say, I am rejoicing at the moment, as I actually
have all my sites set up with FTP info and I am now looking forward
to hopefully adding more and maybe they'll actually be available
for the next editing session. -
I can't remember by FTP login and password CS4
How do I find out my login and password with Dreamweaver CS4. I can't upload any modified web pages without this password. Can I have someone e-mail me a new password? Can I just change to a new password?
>Still nothing working…
What does that mean? It's not working after you disabled your firewall?
>I DO NOT know how to start a second FTP username and password and use that in Dreamweaver.
See if this helps. It's a step-by-step guide for Hostmonster FTP.
https://my.hostmonster.com/cgi/help/ftpaccounts
>Could I just delete the site entirely from Dreamweaver and start a fresh one with new username
No, that's not the problem. The credentials you enter in DW must match your FTP account credentials of your site. -
Login and password can't be saved(ftp)
Hello
Still using Dreamweaver8 on a pc-xp.
Somehow in the "Managing Sites" > Edit > Remote Info
>
the login and password have dissapeared to access the remote
files,
after the program has been shut and reopened again.
Is there another way to store this information in a file?
Where on the filesystem?
Greetings
Lex vd OudeweeteringJohn Waller schreef:
> Download and install the Dreamweaver 8.0.2 updater which
fixes this problem:
>
http://www.adobe.com/support/dreamweaver/downloads_updaters.html#dw8
>
Thank you, John. That was quick. Now I Understand that it
happened after
reinstallling a backup system with Ghost, in May. The
Ghost-backup did
not have the 8.02-Upgrade yet. Had the Upgrade-Installer
still on my
second hard drive. Thank You.
Greetings
Lex vd Oudeweetering -
FTP Usernames and Password issues in DW 8 for Macintosh
Hi,
I have an issues in DW8 on Mac OS 10.4.9. Every so often, my
FTP usernames and passwords in the Dreamweaver site definitions
will swap. That means that the username from one site will now be
in the site def for another site. Nothing else ever swaps, e.g.,
the local paths, passwords, and other settings are fine. It is just
the usernames that seem to move from site to site at random. If I
have a test server set up for a site, it also happens there. I've
looked everywhere and can't find anybody else who has had this
problem. I know there is a similar issue on Windows with IE7, but
haven't seen anything on the Mac. This happens on both my G5 tower
and iBook. If anyone has any thoughts or suggestions, I would
appreciate it. It's not too big of an inconvenience, but it is
annoying. Thanks in advance!
BrianAlthough it may not be the solution, have you installed the
8.0.2 updater?
http://www.adobe.com/support/dreamweaver/downloads_updaters.html
Regards
John Waller -
Captive Wi-Fi network not saving login and password
Since yesterday my iPhone 5S stopped asking if I want to save the login and password information when start a session on a captive Wi-Fi network. The settings Safari>Passwords & Autofill is on and Safari isn't in Private mode. It was working until yesterday and had the option to automatically fill in when I touched the login field.
Any help would be greatly appreciated. Thanks
iPhone 5S - iOS 8.0.2Well, I tried to duplicate what you talked about. I have my wireless here at home, and I chose, "Forget this network" and when I went to rejoin, it asked for a password. Many public networks take their username and password through the browser. Have you tried to open Safari to see if it will default to the username/password screen? I've used mine at hotels that change their access every 24 hours and if I try to log back on after the time, it defaults back to the login screen. That is the only solution that I can think of. And yes, if you go to settings and reset network settings, it will clear all of them.
-
Why if my icloud info is the same as my itunes login and password does it say the account name or password is incorrect
Oops
Forget that, wrong forum. -
Dreamweaver 8 won't hold site login and password information
Hello,
When I enter the login and password information for my DW8
sites and click the save box, it will work fine for the rest of the
work session. I can connect, upload and download without a problem.
But the next day when I try to work on the site again, I get the
error message that the site cannot be found, and have to go back
into manage sites and enter the information again. Can anyone tell
me why my DW isn't keeping this information?Nevermind...after looking further through the site, I found
that it was a problem identified by Adobe and solved with an update
patch. I will download that and it should do the trick.
Thanks. -
Dreavweaver CS3 Loses All Logins and Passwords Regularly
Dreamweaver CS3 regularly loses all saved logins and passwords.
All I have to do is closeout Dreamweaver, shut down Windows, reboot, then open Dreamweaver and all my saved passwords and logins are gone. This doesn't happen every time, but has happend 3 times over the past two months.
Any ideas on how to avoid this? any ideas how to get back all of my saved passwords and logins, so I don't have to re-enter them all the time?
I'm running CS3
Windows XP Professional
Version 2002
Service Pack 3
Intel(R) Core(TM) 2 Quad CPU
Q6600 @ 2.40GHz
2.39 GHz, 3.00 GB of RAMAlthough it's for DW8, does any of this help?
http://kb2.adobe.com/cps/349/3491671c.html -
I recently went to open my windows live mail,which normally opens because it has my login and password saved. Now it opens in firefox and I have to retype my login and password everytime I open my mail. I would like when I open my mail not to have to retype my login and password as this is why I have it set up in the original windows mail anyway. So I have attempted to live with this problem by adjusting the options to save my password and when I close out of firefox and try to reopen it later in the day I have to retype my login and password again.
== This happened ==
Every time Firefox opened
== about a month agoSee this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved -
after having my mbp upgraded with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
The user name and password on your computer has nothing to do with your Apple ID.
Good luck,
Clinton -
Printer is asking for an user acces code instead of windows login and password?
I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
One thing i have noticed is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
We do not need this access code promt instead we need the usual windows login and password that used be there originally.
alsothis is how the settings look like after a cold reset somtimes when it does not asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings@munish259272
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
When I log on to iTunes on my iPad to install apps iTunes accepts my login and password but doesn't download the apps. How do I fix?
Were thse apps you're downloaidng fresh or updating them?
-
How to hide login and password transported in interface ?
Hi !
In the current project that I´m working, the customer is developing a website in .Net and intend to use XI to communication between website and ECC 6.0. One of their needs is to create an interface to call a RFC in ECC 6.0 to validate login+password provided in the website(they created a Z table to persist login data, and a RFC to receive login and password and check in this table).
My problem is, to solve this situation, I would use a simple sincronous interface but, the login+password information will be logged into monitoring screens of XI, and it´s not desireble, so I´m finding a way to hide this information.
Initially, I was thinking to make 2 adapter modules, 1 to be used joined to the Sender SOAP Channel that will be used to the website call, that could get the data send by the website and encrypt it, to be sent to the XI pipeline encripted(only the fields login and password), and the 2nd to be used joined to the RFC Receiver channel, to decrypt login and password to be sent to the RFC call. Another alternative that I found was to use the MessageTransformBean and XLST mapping + java, but I´m looking for another alternatives.
Somebody knows if there are some way to achieve this(hide some information in a message being processed by XI)?
In time, I can´t to disable the logging of syncronous interfaces, because it´s customer requirement.
Any help is welcome !
Thank you in advance, and best regards,
WilsonHi !
I have solved the problem.
I used to develop 2 adapter modules, one to intercept the message arriving to SOAP Sender communication channel, encrypt the content of parametrized fields(in the module tab of the comm. channel) and deliver the updated message to the processing chain of the comm. channel.
This message is so processed correctly by the XI pipeline, and delivered to the RFC Receiver Comm. Channel. I developed another adapter module to receive the data sent to the receiver RFC Comm. Channel, decrypt the contents of parametrized fields(like the another module, parametrized in the module tab), and deliver the updated message to the processing chain of the comm. channel.
After some tests, I verified that the message doesn´t remain logged unencrypted into XI(I checked Message Monitoring for Adapter Engine at Runtime Workbench, and the SXI_MONITOR trn).
Like mentioned by Jaishankar, the SOAP Adapter initially didn´t accepted the module adapter that I wrote following the stardards existing in several documents about adapter modules here in SDN, but after some research, and debbuging sections of the adapter module, I achieved to develop the correct code to work.
Thank you for your attention, and best regards,
Wilson
Maybe you are looking for
-
Importing Video to iMovie 11 Causes Entire Computer to Crash
Hi. I must say up front that I am not very Mac saavy, so I apologize in advance. I am trying to import video from a Canon Vixia HFS200 camera in to my iMovie 11 on my iMac. I'm running OS X version 10.6.8. The other details are in the error report th
-
Problem with delete index of cube in process chain
HI ,i have a problem with my process chain,here on process name as delet index is ther which has been turned to red.when iam going inside of that in Display message iam getting the msg as"Indexes for InfoCube SMS_C06 have been deleted successfully".
-
Avoid billing split for different partners
Dear all, I'd like to avoid invoice split for 2 billing items whose partner function (VE) in a sales order are different. I tried to create a routine in the copy control in VOFM, but it seems that the value of the partner (VBPA-PERNR) could not be pa
-
3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection. Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently. Want to try and update firmware of Timecapsule, but it will not display an "Update" icon.
-
Hi, I have a problem with the database I administer. The dbconsole is not running anymore. The database is still working, but I can't check the administration, using the dbconsole. When I check why the dbconsole is not launched, I obtain these respon