DWCS4 Flash path error

Ok.. swf plays fine off the hard drive and in the standalone Player 10. It also plays by opening an html generated by Flash both on the desktop and online.
When i place the swf file in Dreamweaver, the Flash pieces show, but they don't load the xml files. and thus don't work.
I put this in Dreamweaver forum because it's only when I use the Insert>SWF within DW where I get the problem and I need to get them in a page.
I tried putting the html code from Flash into the html page I have and it doesn't even show up.
Since the swf itself works as well as the html file by Flash, DW is somehow messing the path within the swf??
Also, I'm using an xspf file for the playlist if that helps.
Any ideas?

Well, it seems you've set things up correctly. But we can't really tell until we can see the problem page online. We are reduced to making guesses.
You might find that using FireFox with the Live HTTP Headers add-on can point to missing files that may not otherwise be obvious.
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.

Similar Messages

Chart Flash Chart error: ORA-20001: Print Chart Data: Flash Chart error: OR

Hi,
if the query where my resource gantt chart is based on returns more the 107 rows, i will get the following error:
chart Flash Chart error: ORA-20001: Print Chart Data: Flash Chart error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
If i reduce the number of results, the chart is working fine.
Max rows attribute of the series is adjusted to 4000
Any idea?
Thank you

Thank you,
I have tried it, but it I am not able to make it work, here you find a snip of my pagesource:
<anygantt> <resource_chart>
<resources>
<resource id="341" name="Drexler, Franz" />
<resource id="5" name="Gross, Johannes-Ludwig" />
<resource id="8" name="Pecherski, Andrzej" />
<resource id="131" name="Steinmetz, Raphael" />
<resource id="191" name="Jenks, Raymond" />
<resource id="33" name="Alhambra, Roda Marie" />
<resource id="31" name="Daminescu, Adrian" />
</resources>
<periods>
<period resource_id= "31" start="24-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-DEC-12 12.00.00.000000000 AM" end="28-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-JAN-13 12.00.00.000000000 AM" end="04-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="26-JAN-13 12.00.00.000000000 AM" end="04-FEB-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="01-JAN-13 12.00.00.000000000 AM" end="06-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="22-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="21-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "31" start="07-JAN-13 12.00.00.000000000 AM" end="11-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="21-DEC-12 12.00.00.000000000 AM" end="21-DEC-12 12.00.00.000000000 AM" style="blue" />
<period resource_id= "33" start="26-DEC-12 12.00.00.000000000 AM" end="28-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "33" start="25-FEB-13 12.00.00.000000000 AM" end="25-FEB-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="28-MAR-13 12.00.00.000000000 AM" end="29-MAR-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="09-APR-13 12.00.00.000000000 AM" end="09-APR-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="01-MAY-13 12.00.00.000000000 AM" end="01-MAY-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="12-JUN-13 12.00.00.000000000 AM" end="12-JUN-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="26-AUG-13 12.00.00.000000000 AM" end="26-AUG-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="01-NOV-13 12.00.00.000000000 AM" end="01-NOV-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="30-DEC-13 12.00.00.000000000 AM" end="30-DEC-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="31-DEC-13 12.00.00.000000000 AM" end="31-DEC-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="21-AUG-13 12.00.00.000000000 AM" end="21-AUG-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="15-OCT-13 12.00.00.000000000 AM" end="15-OCT-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "8" start="23-DEC-13 12.00.00.000000000 AM" end="23-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-DEC-13 12.00.00.000000000 AM" end="27-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="30-DEC-13 12.00.00.000000000 AM" end="30-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-JAN-14 12.00.00.000000000 AM" end="03-JAN-14 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="31-MAY-13 12.00.00.000000000 AM" end="31-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="21-MAY-13 12.00.00.000000000 AM" end="24-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-MAY-13 12.00.00.000000000 AM" end="29-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="31-MAY-13 12.00.00.000000000 AM" end="31-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-APR-13 12.00.00.000000000 AM" end="05-APR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="11-FEB-13 12.00.00.000000000 AM" end="11-FEB-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="29-JUN-13 12.00.00.000000000 AM" end="14-JUL-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="16-AUG-13 12.00.00.000000000 AM" end="16-AUG-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "8" start="26-AUG-13 12.00.00.000000000 AM" end="30-AUG-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-SEP-13 12.00.00.000000000 AM" end="06-SEP-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="15-FEB-13 12.00.00.000000000 AM" end="15-FEB-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "5" start="13-MAR-13 12.00.00.000000000 AM" end="13-MAR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="22-MAR-13 12.00.00.000000000 AM" end="22-MAR-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "33" start="20-MAR-13 12.00.00.000000000 AM" end="20-MAR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="08-APR-13 12.00.00.000000000 AM" end="08-APR-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "31" start="05-APR-13 12.00.00.000000000 AM" end="05-APR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "31" start="02-MAY-13 12.00.00.000000000 AM" end="03-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "341" start="01-JUL-13 12.00.00.000000000 AM" end="22-JUL-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "341" start="09-MAY-13 12.00.00.000000000 AM" end="12-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "191" start="04-JUL-13 12.00.00.000000000 AM" end="06-JUL-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "31" start="15-JUN-13 12.00.00.000000000 AM" end="30-JUN-13 12.00.00.000000000 AM" style="green" />
</periods>
</resource_chart></anygantt>
</textarea>
<div id="chartDiv"></div>
<script type="text/javascript" language="javascript">
/* Set default swf path */
AnyChart.swfFile = 'i/flashchart/anychart_6/swf/OracleAnyChart.swf';
/* Create new gantt chart */
var chart = new AnyChart();
chart.width="2500";
chart.height="2500";
/* Get string data from text area */
var data = document.getElementById('rowData').value.toString();
/* Set data */
chart.setData(data);
/* Write chart to "chart" div */
chart.write("chartDiv");
</script>
do you have a idea whats wrong? thank you

Invalid Report File Path Error

I have included several Crystal Reports as embedded resources in a Visual Studio 2010 C# project. When I try to run the application on a client PC I receive an invalid report file path error. Why am I receiving this error if the rpt is embedded in the manifest?

The following code now works on my development machine. It obtains the server name and database name from the configuration file. When I run on my client PC, however, it prompts me to log into the database. It provides the correct server name but the database name is blank and integrated security is not checked. The database name field is not enabled so I cannot provide a value.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine; //jp
using CrystalDecisions.Shared; //jp
namespace WindowsFormsApplication1
    public partial class FormRptArtist : Form
        private CrystalReport1 crReportDocument = new CrystalReport1();
        public FormRptArtist()
            InitializeComponent();
            ToolTip toolTip = new ToolTip(); toolTip.SetToolTip(btnHelp, "Flash Video Training / Help");
            helpProvider1.HelpNamespace = GlobalClass.gb_help;
        private void FormRptArtist_Load(object sender, EventArgs e)
            TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
            TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
            ConnectionInfo crConnectionInfo = new ConnectionInfo();
            Tables CrTables;
            bool repeat = true;
            while (repeat)
                try
                    crConnectionInfo.ServerName = Properties.Settings.Default.CrystalServer;
                    crConnectionInfo.DatabaseName = Properties.Settings.Default.CrystalDatabase;
                    crConnectionInfo.IntegratedSecurity = true;
                    CrTables = crReportDocument.Database.Tables;
                    foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
                        crtableLogoninfo = CrTable.LogOnInfo;
                        crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                        CrTable.ApplyLogOnInfo(crtableLogoninfo);
                    crystalReportViewer1.ReportSource = crReportDocument;
                    crystalReportViewer1.Refresh();
                    break;
                catch (Exception exp)
                    MessageBox.Show(exp.Message);
                    DialogResult result1 = MessageBox.Show("Try Again?", "Database Connection Error",
                        MessageBoxButtons.RetryCancel);
                    if (result1 == DialogResult.Retry)
                        FormCrystalParms newWindow = new FormCrystalParms();
                        newWindow.ShowDialog();
                    else
                        repeat = false;
        private void CrystalReport11_InitReport(object sender, EventArgs e)
        private void btnHelp_Click(object sender, EventArgs e)
            GlobalClass.displayflashhelp(this, "formrptartist");
        private void crystalReportViewer1_Load(object sender, EventArgs e)

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

Flash chart - Error - No chart data available

Hi
I have a Flash chart that shows the message "Error - No chart data available" (not the no data found message).
If I run its query in sql*plus (using the same parameters) I get 4 rows (with url, label and value columns). I am clueless about how to start investigating this as the chart does not show any other information... Any advice?
What does that message mean? Obviously is something different from no data found?
Thanks
Luis

Hi Marco
Thanks for the reply. I did what you said and found out the problem:
chart Flash Chart error: ORA-20001: get_data error: ORA-20001: Fetch error: ORA-01843: not a valid monthThis was caused because I used the following construction:
where date_from = :p5_date_fromIf this was a report, this would run fine as I set the date format mask using a application level process. However, as Flash charts use separate database connections, they ignore that setting (btw I posted a message about this problem).
I fixed it hardcoding a format mask in my SQL. Not nice but it works!
Thanks
Luis

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

Due to flash drive error on MBA my drive was wiped yesterday and OS re installed. How to I get my bookmarks still on my iPhone back onto the mba

Due to flash drive error on MBA my drive was wiped yesterday and OS re installed. How to I get my bookmarks still on my iPhone back onto the mba

Hi Nathanbeyondme!
I have an article that can help you with that question:
OS X Mountain Lion: Store your content in iCloud
http://support.apple.com/kb/PH11421
Safari bookmarks and tabs
iCloud keeps your bookmarks and Reading List the same in Safari on your Mac, iPhone, iPad, and iPod touch. On your Mac, Safari also uses iCloud to let you open tabs that are open on your other devices. You set up the Safari service in iCloud preferences.
If you are having issues with syncing these bookmarks, you will want to reference the following article:
iCloud: Troubleshooting iCloud Bookmarks and Reading List
http://support.apple.com/kb/ts4001
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Flash Builder Error Compiling Ipad Actionscript Mobile Project.

I just bought a brand new ipad for testing. I am using flash buider 4.7 to make an actionscript mobile project. I created an app ID, provisioning profile, and certificate. I have done this before in flash professional so it wasn't too bad. However, when I run or debug even a blank application I get this error in flash builder:
Error occurred while packaging the application:
'Launching AppName' has encountered a problem.
Error occurred while packaging the application.
Exception in thread "main" java.lang.Error: Unable to find llvm JNI lib in:
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/adt.jar/Darwin
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/aot/lib/x64
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib/adt.jar
/Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK/lib
                at adobe.abc.LLVMEmitter.loadJNI(LLVMEmitter.java:582)
                at adobe.abc.LLVMEmitter.<clinit>(LLVMEmitter.java:596)
                at com.adobe.air.ipa.AOTCompiler.generateExtensionsGlue(AOTCompiler.java:419)
                at com.adobe.air.ipa.AOTCompiler.generateMachineBinaries(AOTCompiler.java:1790)
                at com.adobe.air.ipa.IPAOutputStream.createIosBinary(IPAOutputStream.java:378)
                at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:762)
                at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:91)
                at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:245)
                at com.adobe.air.ADT.parseArgsAndGo(ADT.java:571)
                at com.adobe.air.ADT.run(ADT.java:419)
                at com.adobe.air.ADT.main(ADT.java:469)
I have no idea where to even start in trying to figure out what could be the problem. I am pretty sure the itunes developer information is correct. Are there any kinds of drivers or developer modes that I need to set for a new iPad?
Thanks!

Thanks Shongrunden for your reply.
Yes, you are right. If I make a new Flex mobile project, I did not see the issue.
But that did not fully answer my question, my concern is: can an actionscript project use spark components?
Thanks.

Flash Security Error

I how can I solved the Flash Security Error? I can't view a chart that requires Flash.

Has anyone been able to resolve this issue? There is also a similar older post (http://forums.adobe.com/message/32592#32592) that has not been answered.
I have a Flex app on my website that downloads a file from the same place. Both are under the root directory. This works fine in IE7, IE9, Firefox, Chrome, and Opera. In IE8 I get the error (error text is "Error #2048"). This is on 32- and 64-bit XP machines.
I even tried putting a crossdomain xml file (which should not be needed) to no avail.
Any help would be appreciated.

Flash Content error......

Hi
I found the error popup windows "Flash content error : 9" is
displayed when swf file is played in Flash Lite 2.0 on Symbian OS.
What is this error popup mean?? And how can I solve this
problem??
Please, help me....
Thank you.

Hi Ashish,
This is the actionscript stuck error, you are trying to do
too much in a single frame. It could be that you are loading too
much XML data or other data from a network connection. You may be
trying to process a lot of Actionscript in a single frame.
If you are using XML then you should consider a different
format, maybe key value pairs.
Another approach is to load pieces of the data and process
them in batches. You can use setInterval to enable a fake
asynchronous behaviour.
Mark

Flash Content Error :4

Hi Friends,
Does any body here faced "Flash Content Error:4" problem and
he was able to solve it.
Regards
Ashish

Hi Ashish,
This is the actionscript stuck error, you are trying to do
too much in a single frame. It could be that you are loading too
much XML data or other data from a network connection. You may be
trying to process a lot of Actionscript in a single frame.
If you are using XML then you should consider a different
format, maybe key value pairs.
Another approach is to load pieces of the data and process
them in batches. You can use setInterval to enable a fake
asynchronous behaviour.
Mark

"no ocijdbc11 in java.library.path" error when connecting a TNS database co

Hi
"no ocijdbc11 in java.library.path" error when connecting a TNS database connection
I have the same problem 'error code' when testing the connection to a database although I have an APEX db that connects without a problem.
I have re downloaded jre & SQL Developer just to ensure all files are where they should be with no luck.
I've also tried most of the suggestions in various threads.
Does anyone know what exactly causes this error?
eg; should I be looking for a file called 'ocijdbc11' & put it into the 'java.library.path' path?
Can anyone explain to a newbie at db connections what I should do?
I'm using the 'thin' client as the checkbox is clear & I don't know what path to enter into the correct file to make this work??
This is & needs to connect as a TNS connection & was working fine until recently, the only change I can think of is a move of files from the 'C' drive but I thought redownloading SQL Developer would slove this.
Thanks

When you reinstalled SQL Developer, did you install into a new directory (ie rename or delete the old directory first)?
I don't know if system setup contains directory references (which might be invalid after moving the location of SQL Developer). Does renaming your system2.1.1.64.45 directory (in C:\Documents and Settings\username\Application Data\SQL Developer) help? Note that your connections are in the connections.xml file in the o.jdeveloper.db.connection.11.1.1.2.36.55.30 subdirectory of system2.1.1.64.45 - you will either need to export connections before renaming and then import again after or copy this file to test if you can connect.
Finally, the TNS Names directory preference is just a way of telling SQL Developer where to look for the tnsnames.ora file, rather than just assuming it will pick the right one. If you go to create a new connection, do you get the right list of TNS aliases? If not, then set this preference to the directory where the right tnsnames.ora file lives.
theFurryOne

Flash link(button) problem via xml link (Flash popup error)

hi...
I'm getting a problem when i run a swf file from HTML/Outside(i mean to say from folder) and click on the button (button calling xml file which has link in it), i get a adobe flash popup error/msg. As shown below....
my codes are as follows
XML CODE:
<?xml version="1.0" encoding="utf-8"?>
<tree>
<link>
<port>http://www.marcomanie.com</port>
<news>http://www.asdfmanie.com</news>
<gallery>http://www.wesdmanie.com</gallery>
</link>
</tree>
My flash codes are as follows
LOADING AS
function loadXML(loaded) {
if (loaded) {
_root.port = this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
_root.news = this.firstChild.childNodes[0].childNodes[2].firstChild.nodeValue;
_root.gallery = this.firstChild.childNodes[0].childNodes[3].firstChild.nodeValue;
port.text = _root.port;
news.text = _root.news;
gallery.text = _root.gallery;
} else {
trace("file not loaded!");
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("linker.xml");
BUTTON AS
on (release) {
getURL(_root.port, "_self");
Pls let me know what i have to do, to get away with that error
im very much new to these kind of errors, any fast help will be appreciated.
thank u
sunder

fix your security settings to trust that swf:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

AEBS/relay/remote flashes WDS Errors

I am trying to set up a remote connection from the office to the gym using 3 Airport Extreme Base Stations. I currently have all 3 in a room the main connected to the DSL modem, and the remote connected to the main via ethernet.
The problem is that the main keeps flashing WDS Errors, then goes back to a Normal status. The relay would flash, then the remote. I removed the relay, and the remote seems to keep it Normal status better even as the main changes to WDS Error - it shows an error it is just for a blink. WDS Error is "This Apple wireless device is set up as part of a WDS network but no other Apple wireless devices were found." When ever the main changes status it drops it wireless clients.
If I use the main in "Create wireless network" it seems to work fine.
Anyone know why this might be happening? Can I just click ignore it since the remote is Normal most of the time?
I have set up the network following Apples Designing AirPort networks guide available online http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf . I have entered the airport id in the proper place and set the WDS Mode to the proper mode for each device.
I have tried checking and unchecking the use interference robustness (makes no difference). I have checked and unchecked "Allow this network to be extended" and found there to be no difference. All three are set at Participate in a WDS network.
I have tried every channel and there is no difference.
Should the Wireless Mode on the relay/remote be Extend a wireless network? Should allow this network to be extended be checked or unchecked?
Any more ideas will be appreciated. Time to enjoy the 4th!

I have set on AEBS in the hall about 100 feet from the first. I am going though 2 steel framed drywalls and one block&brick wall. Still have about 1650kbps using iNetwork test. The problem has been getting into the gym. I can get from the hall through a glass window, courtyard, steel covered wooded door and into the kitchen. But the wall between the kitchen and gym is double thick with steel rods. I changed the location of the remote from the kitchen to the storage room, which houses the water heaters. The signal goes through the courtyard and a brick&block wall. The reading was about 400kbps and I am able to get through the wooden doors into the gym area with one bar showing on my Macbook.
I guess I will have to try something different.

DWCS4 Flash path error

Similar Messages

Maybe you are looking for