DWCS6 ACA exam prep?

Hello everyone,
i'm going to get the ACA certification about Dreamweaver CS6. To be more prepared, i completed the "courses" with "Dreamweaver CS6 Classroom in a book" and "Introduction to Adobe Dreamweaver CS6 with ACA Certification", i followed guides and so on. Now i'd like to book that exam but i'm not completely sure that i know all the necessary to pass. Checking around i saw that there are sites that offer t-prep or something like that, simulations of the exam with examples and explanations. Thi, over all, for the ACE exam... and i couldn't find the ACA one!
Anyone knows a site where i can buy a license or something like that for this kind of simulation? Or at least, is there a good site where i can practice more (or another book that prepares me better than those, maybe.... not saying they're bad, but i'm not confident in my preparation).
Thanks in advance!
EDIT: i'm thinking about getting the ACE prep exam.... would it be a wise choice? I imagine that, once you're ready for an ACE exam, the ACA is going to be a walk in the park... or am i wrong?

Adobe Certified Expert (ACE) exams are much more comprehensive. To pass this level, you will need to be very familiar with:
HTML,
CSS,
client-side scripts,
server-side scripts,
connecting to databases,
the various behaviors panels,
working with forms,
working with Templates,
and all other aspects of the DW software version you are being tested on.
In contrast, the Adobe Certified Associate (ACA) exam is more of an intro level exam & not nearly as complex. It measures basic proficiency with your chosen product. As such the preparation is not too rigorous either. Below you will find the ACA Prep Guides for DW CS3 - CS6.
Adobe Certified Associate (ACA) preparation materials | Adobe
Good luck!
Nancy O.

Similar Messages

Design practices from the CLD Exam Prep Guide

    I have a question about design practices as stated in the CLD Exam Prep Guide found at   http://ftp.ni.com/evaluation/certification/cld/cld_exam_prep_guide_english.pdf
   Please refer to statements
2.e.1. Set the value or attributes of a control, statically using the property dialog box of an object, or dynamically using Property Nodes.
2.e.2. Initialize or set control values at application, load, start, and stop.
4.a.4. Use local variables to update controls.
   Because the words initialize and set and update all mean to change the value and two different methods are suggested to do so, I first saw this as contradictory. Assuming there is no contradiction, it should be very clear when, where, and why each method is used.
   From section 2.e I understand this to mean you should change (set) a control value at application, load, start, and stop by using Property Nodes. Thus, application, load, start, and stop shall be clearly identified within your block diagram to avoid misunderstanding.
   From section 4.a I understand this to mean you should change (update - as you might do repeatedly within a while loop) a control value by using local variables everywhere else in your block diagram. If I understand this correctly, there is no contradiction. Otherwise....
Please advise! Scott Pierskalla
Certified LabVIEW Associate Developer

spiersk wrote:
    I have a question about design practices as stated in the CLD Exam Prep Guide found at   http://ftp.ni.com/evaluation/certification/cld/cld_exam_prep_guide_english.pdf
   Please refer to statements
2.e.1. Set the value or attributes of a control, statically using the property dialog box of an object, or dynamically using Property Nodes.
2.e.2. Initialize or set control values at application, load, start, and stop.
4.a.4. Use local variables to update controls.
   Because the words initialize and set and update all mean to change the value and two different methods are suggested to do so, I first saw this as contradictory. Assuming there is no contradiction, it should be very clear when, where, and why each method is used.
   From section 2.e I understand this to mean you should change (set) a control value at application, load, start, and stop by using Property Nodes. Thus, application, load, start, and stop shall be clearly identified within your block diagram to avoid misunderstanding.
   From section 4.a I understand this to mean you should change (update - as you might do repeatedly within a while loop) a control value by using local variables everywhere else in your block diagram. If I understand this correctly, there is no contradiction. Otherwise....
Please advise! Scott Pierskalla
Certified LabVIEW Associate Developer
Scott,
Thank you for drawing my attention to this thread. I understand your confussion but, there is no contradiction. I will attempt to clairify the statements.
Section 2 addresses design of the GUI or, how to set up the user experience. Several questions any developer needs to ask are:
Is the data represented correctly? (what data type is needed?)
How will the user change this data? (Enum / Ring / Combo box pull-down, maybe the increment / decrement buttons, Perhaps direct text entry from the keyboard? If so do we wish to update value while typing or end text entry with "Enter"?)
How can I make it "Pretty?" (What colors are approachable, how can I present logical groupings of the data the user needs....?)
Section 2 is all about the user. Your application will be used by users and, they need to interact with your product. Design the interface correctly and they will never notice, design it poorly and they will wish to break you nose because the software just does not "FEEL" right.
Section 4 addresses Programing practices.
Avoid Localitis
Avoid sequenceitis
don't ABUSE Globals
use common design patterns
Basically "Write Software" not "Functional spaghetti code"
Writting "Good Software" in LabVIEW is one of the things that CAN BE DONE with LabVIEW. Unfortunatly, because LabVIEW is often approached by people with no understanding of Software Engineering principals, many LabVIEW applications fall into the "Functional Code" bucket and are poor "Software".
The CLD exam will require you to domenstrate that you can apply software engineering principals in the LabVIEW IDE.
Good Luck- Sling some wires!
Jeff

How do I Prepare for the Adobe Certified Associate (ACA) exam.

how do I Prepare for the Adobe Certified Associate (ACA) exam

I have NO idea where you should ask that question, but THIS forum is about help with installing Cloud programs
If you will start at the Forums Index https://forums.adobe.com/welcome
You MAY be able to select a forum for the specific Adobe question you have
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

MCSA Windows Server 2012 Certification Exam prep

I am studying for the MCSA Windows Server 2012 certification. I have looked at the books on amazon and would like your opinion on book selection. In the past I have found the self-pace exam prep books by microsoft to my liking. If you know of any
web sites that contain information on how to prepare for the MCSA Windows Server 2012 certification that would great too. I think I am going to setup a lab using Windows Server 2012 R2 machines to assist my learning so information on that topic would be great.
I am currently using Virtual Box to create virtual machines.

Hi, I always liked the exam prep book from MS with hand-on lab. There is
http://www.microsoftvirtualacademy.com/ from MS as well, could be a good place to check. I know too that @KeithMayer on twitter do post a lot of ressource too.
I will move the thread to the learning section, as maybe other users got other ressource of value.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Exam Prep Book for SCJA or SCJP

Which is the best exam prep book to get should I decide that I want to go for a sun certification in either
SCJA or SCJP

Resp. Sir!
I am Marimuthu i wants to get certify the sun microsystem's SCJP - Exam, sir i am complete my PG- in M.sc. comp.sci. & currently doing job Lecturer in college, sir i want your kind reply for :
- What is the eligibility for SCJP -exam
- What are the centers for the exam
- What are the fees structure
- What study materials i am prefered.
Please sent your Kind Reply,
Yours Truly,
Mr. MARIMUTHU
M.sc Comp. sci.

Can Someone lead me to a Free Solaris 9 exam prep material.

Seeking any or all Free Sites for Study of Solaris 9 exam both 1 and 2.
Any help is much appreciated.
Thanks Gman and Niner
Two who seek to pass the test on a low budget

Try your local b&n. From what I can tell you can pull a book off the shelf, go sit at a table and read till the place closes :)
Course, nothing's better then actually using 9 (be x86 or Sparc). I think you can get download x86 free, and it'd probably install on your PC :)
(Those are my best suggestions ...)
Good luck!
-Daryl

Adobe Certified Expert Exam Prep.

Hi, all. I need to get certified with the ACE in Illustrator and Photoshop for work. I feel comfortable with the Design version of the Creative Suite, but I know that the ACE exams are not easy to pass. I'm wondering what the best study/preparation materials are. If anyone has a suggestion from experience, I would really appreciate it, as I am already nervous about having to sit for the exams. I'd feel a lot more confident if I knew I was well-prepared first.
Thanks so much for your help!

Always a few questions from ACE book as suggested, and can be seen with every version update of ACE books
Go through EVERY menu and palette flyout option (I start left to right)
Go over color mgmt again (though most people turn off color mgmt or leave defaults because it is so complex, always a few questions on that)
Read the post on these forums (actually an excellent way to one up before the exams, cause it forces you to go into things you don't normally do)
Search help for keyboard shortcuts and go over all of them. You won't get asked to memorize every keyboard shortcut so don't worry, but again this forces you to break your habit and go into things you might not use)
Go deep into transparency options and appearance panel
Do this and you will be condfident and ready

CCNA Wireless Exam Prep material

Hi ,
Anyone know if there is any study guide from Cisco for the new version of CCNA Wireless exam ? I have found a quick refrence guide , an electronice format but that's about it.
Thx .

Hi there..
You are best to look at the exam objectives and then read the free config guides and design guides.
There are official guides, but they are like 2+ years old, but most content is still relevant.
The official CCNA study guide by Brandon Carroll
The CCNA wireless study guide by Todd Lammle (i was the tech editor for that book)
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

OCP 10g exam prep class requirment 3000$

After OCA 10g, To appear int OCP 10g exam, requirment is that one should attend the preparation class which cost 3000$, What if one can't afford this, Is there any way to skip this class or attend some other prereq.....

(I would like somebody to correct me if I am wrong in my understanding)
While it is an absolute must that you should attend a hands-on session from Oracle University as a 10g OCP requirement, It is NOT AN absolute must that you shell out $3000 USD. You can pick your course. See below for more details.
http://www.oracle.com/global/us/education/certification/dba10g_ocpcoursereq_approvedlist.html
Here, you will find that, If you are looking for a cost-effective option, and don't care which course you go to, but also satisfy the OCP 10g course requirement, go with
"Oracle Database 10g: SQL Tuning Workshop" which is only $1800 USD ! (Well, only is not a good word to use here....however fits best in this context !!)

MC 70-680 Exam Prep?

Hi
I've been working as an IT engineer for a couple of years now and want to get some certifications under my belt. I'm planning to start with the MCITP 70-680 Exam.
I'm trying to find some kind of free study material online and found exactly what I need on the MS eLearning website, but you cannot access them.
How do I get hold of these as these look perfect for me?
I've also found a study guide on the mcmcse website.
I was looking at doing a course but they are far too expensive for me to afford, and I would much prefer to read a book or watch video tutorials in the comfort of my own home :)
What can people suggest? Does anyone know where I can get the MS eLearning tutorials?
Thanks
Dunc

here some good book for you and it's free
https://www.google.co.il/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&ved=0CC8QFjAD&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2FD%2FF%2FF%2FDFFD108D-B869-4894-A509-AD721C0FB3A9%2F70-680-changepages.pdf&ei=-GahU8WXKaWO4gS3qIFo&usg=AFQjCNHqSxu4MtYtZ8dFWEVBoIOwLD12gQ&sig2=_BF5ggCvlb6dZ9VTmv5BeQ&bvm=bv.69137298,d.bGE&cad=rja
here 12 hr of video
https://www.youtube.com/playlist?list=PL2552C352B8B8E11A
Tzuri Ben Ezra | My Certifications A Plus, MCP, MCSA, MCITP | FaceBook:
Tzuri FaceBook

Exam prep (2)

5.Write a method called drawCircl e that draws a circle based on the method's
parameters: a Graphics object through which to draw the circle, two integer
values representing the (x, y) coordinates of the centre of the circle, another integer
that represents the circle's radius, and a Colour object that defines the circle's colour~ The method does not retum anything..:
6.Overload the drawCircle method of the question 2 above such that if the Colour
parameter is not provided, the circle's colour will default to black.
7.Overload the dra wCi rcl e method of the question 2 above such that if the radius is
not provided, a random radius in the range 10 to 100 (inclusive) will be used.
8.The class Thought is the parent of the class Advice. Both the Thought class and the
Advice class contain a definition for a method called message. The version of message
defined in the Thought class is inherited by Advice, but Advice overrides it with an
alternative version. The new version of the method prints out an entirely different
message and then invokes the parent's version of the message method.
(i) Create the class Thought to print out the string "I feel like I'm diagonally parked
in a parallel universe."
(ii) Create the class Advice in which the method message is overriden to print out the
string "Warning: Dates in calendar are closer than they appear."
(iii) Create the class Messages in which main method is contained to instantiate two
objects: the method message from class Thought and the method message from
class Advice.

Very few people will help you when you have shown little or no work on your own. What has you stuck? What do you think the answer (to one question at a time) would be? Then, maybe, we can point you in the right direction.
- Saish

Adobe Premiere ACA Video Communication Exam?

Has anyone taken the entry level exam? I can do everything in the exam with ease, but missed the cut by two questions and have been having problems finding anything of value to use as a suitable guide. The exam prep materials on from Adobe aren't helpful. Anyone with thoughts or suggestions, that would be great.
Thanks

Welcome to the forum.
As your system setup will likely be much different from that of Konrad's, I would start a new thread, and in it, list the full system in detail, as Konrad did. This ARTICLE will give you tips on the info that would be very useful.
In Konrad's case, the C:\ was filled to about capacity, so could well have been a contributing factor. That is why full I/O specs. will be very, very useful.
Good luck,
Hunt

Please can some-one tell me where to find the price differences between the ACA and ACE exams.

Please can someone tell me the price difference (in ZAR) between the ACE and ACA exams.

Why did you post this in the forum for Adobe Reader?

Re: DreamWeaver CS3 Ace Prep Materials

"Steve Fleischer" <[email protected]> wrote in
message
news:gdqfth$kmd$[email protected]..
> ... No harm in it though.
Well.. you do have to listen to people on the forum insisting
ad nauseum
that there is no benefit at all in taking the exams. :-)
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Adobe Certified Expert (ACE) exams are much more comprehensive. To pass this level, you will need to be very familiar with:
HTML,
CSS,
client-side scripts,
server-side scripts,
connecting to databases,
the various behaviors panels,
working with forms,
working with Templates,
and all other aspects of the DW software version you are being tested on.
In contrast, the Adobe Certified Associate (ACA) exam is more of an intro level exam & not nearly as complex. It measures basic proficiency with your chosen product. As such the preparation is not too rigorous either. Below you will find the ACA Prep Guides for DW CS3 - CS6.
Adobe Certified Associate (ACA) preparation materials | Adobe
Good luck!
Nancy O.

What is the best practice exam for 70-462 SQL 2012 DB Admin. exam?

Hi All,
I've completed the 70-462 exam prep guide from Microsoft press, i.e., I've read the book twice and practiced everything I could on my lab network (short of AlwaysOn and Clustering), including all the review questions and practice sections. Now I need
a practice exam and I'm wondering what success test-takers would suggest.
I saw Transcender's practice exam for 70-461 and it was less than what I expected. There were questions that didn't belong there and I don't want to waste my money on a practice exam that has a bunch of "filler" questions. It was the
first Transcender practice exam I've ever seen.
Thanks for any advice you can provide! I expect to take the exam in about 3 weeks.
Eric B.

Seriously, though, I've been studying this guide for nearly 6 months, don't have the money to re-test over and over, and would rather pay for a practice test than pay for the exam itself more than once.
Hi Eric,
In addition to Kalman’s post, based on my research, you can take a practice test for 70-462 from below link. Also, as is suggested in this
article, you can buy a practice test for Exam 70-462 from Kaplan SelfTest and MeasureUp.
http://www.accelerated-ideas.com/free-70462-practice-test.aspx#.VGRCzf6KCM8
Besides, about such issues, for quick and accurate response, I would like to recommend that you ask the question in the Learning forums at
https://social.technet.microsoft.com/Forums/en-US/home?forum=CertGeneral . It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang

DWCS6 ACA exam prep?

Similar Messages

Maybe you are looking for