Dwdm cisco product selection

Hello all,
i wanted to connect DC to DR site by 10g link.if i get the dark fibre, which Cisco optical product will meet my requirements for dwdm connection. i checked ONS 15454 but it seems its bit big as i am just using 1 pair of fiber.
Any suggetions.
thanks in advance.

We are not saying that the 15454 is the box for you. The distance and your expected wavelength growth helps determine what system to pick.
You mentioned your wanting to transport 1G links as well, then maybe a passive CWDM solution would work (see link below). This solution will also allow for a 1310nm channel to be added that could possibly be used with your 10G X2 module. There are also options to integrate with DWDM to add additional wavelengths (2nd link below).
CWDM Solution
<http://www.cisco.com/en/US/products/ps6575/index.html>
EDWDM Solution
<https://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_data_sheet0900aecd806a1c36.html>
These passive systems can be easy to use versus deploying a full-blown DWDM system.
Hope this helps!

Similar Messages

WAAS Product Selection

What criteria should we consider for the WAAS product selection?
We know to an extent that the model selection is based on WAN bandwidth and Number of users. But is there a document from Cisco clearly defining the selection criteria and the range for each models?
Also, is there any guidance values to decide on the hard disk size?.

Natarajan,
Your Cisco account SE has access to the appropriate sizing tools for your WAAS deployment.
Zach

Multiple schedule line and reschedule for product selection

Hi,
Is it possible to mainatine multiple sechedule line for sales order where product selection is active
Let me explain the problem in detail.
We are using product selection functionality while creating sales order. Say for example in VB11 transaction I have maintained A= A1, A2 and A3. Where A1 has stock 50, A2 has stock 30, A3 has stock 20. Suppose my sales order is 150 for material A. The reason used is 0004 'automatic'. So while creating the sales order, confirmed qty for A1=50, A2 =30 and A3
= 20. I have unconfirmed qty. 50. for this scenario, I need to enable a
partial delivery, 1st I need to let the customer know when my 100 pcs going to be delivered and 2nd when my balance 50 pcs going to be delivered. So in the sales order I need to maintain two schedule line , one for
confirmed 100 and another for unconfirmed 50. I am not able to do this.
I can maintain only one schedule line per main item and at the sub item
level not possible to maintain.
The second problem is that, when I get stock for unconfirmed 50, I can
not reschedule. can anyone please help to solve this issue?
Regards,
Beena

goto item and doublle click on item and goto schedule lines and chenage the shedule lines..
wat i know is by avaiblity check it propose the delievry dates of items...
goto MM02 and mrp 1.. you can give there days to producee..
OR doc type propose delivery dates.. lead days...
hope it helps
you
ramki

Automatic Product Selection item value not updated in S067

Hello,
We have a requirement for Automatic product selection based on ATP with pricing at item level. This is working fine.
But the value of the subitem is not updated in open delivery value S067 after saving the delivery.
The item category is marked as credit active. update group is 15.
If i do main item pricing then the value is getting updated successfully.
I check several notes but nothing helped.
Pls. help.
Regards,
Praveen

assigned it in sales order at item level in Billing tab
Assign the same at header level billing tab in sale order.
thanks
G. Lakshmipathi

Material determination with Product selection

Hi SAP Gurus
We are using material determination with product selection. The process is that customer will send in one product in a sales order. At the time of doing ATP we have to look for about three or four possible alternatives and confirm that alternative which has the highest stock level depending on the ATP situation. We have configured material determination with SAP standard substitution reason0006 to take care of this. The problem with this is that this creates two line items in sales order as the item substituted is shown as a sub-item of the material entered. We do not want to have two line items in a sales order for this. Is there a way we can do material determination with product selection (Based on ATP) and have the item substituted replace the item entered in a sales order? In other words we do not want to see two line items in a sales order. The substitute item should simply replace the original item and the material entered could be stored in field VBAP-MATWA. I have gone through all the standard SAP documentation which clearly states that in order to material determination based on ATP we have to use outcome A or B both of which create a sub-item.
I was wondering if there is any workaround or if there is any user exit in which we can replace the original item with the substituted item?? Any help or any direction will be highly appreciated.
Another question is if we were to use APO for doing global/Rule based ATP is it possible to get rid of the double line items. We have also tried to use rule based ATP in APO and use product/location substitution in our sandbox system to see if we can get back only one line item. But even in that case we do get a sub item. Any help on this issue will be greatly appreciated. You can also send me an e-mail at [email protected]
Thanks
SDSAPCON

>
SAPCON SD wrote:
> Hi SAP Gurus
>
> We are using material determination with product selection. The process is that customer will send in one product in a sales order. At the time of doing ATP we have to look for about three or four possible alternatives and confirm that alternative which has the highest stock level depending on the ATP situation. We have configured material determination with SAP standard substitution reason0006 to take care of this. The problem with this is that this creates two line items in sales order as the item substituted is shown as a sub-item of the material entered. We do not want to have two line items in a sales order for this. Is there a way we can do material determination with product selection (Based on ATP) and have the item substituted replace the item entered in a sales order? In other words we do not want to see two line items in a sales order. The substitute item should simply replace the original item and the material entered could be stored in field VBAP-MATWA. I have gone through all the standard SAP documentation which clearly states that in order to material determination based on ATP we have to use outcome A or B both of which create a sub-item.
>
> I was wondering if there is any workaround or if there is any user exit in which we can replace the original item with the substituted item?? Any help or any direction will be highly appreciated.
>
> Another question is if we were to use APO for doing global/Rule based ATP is it possible to get rid of the double line items. We have also tried to use rule based ATP in APO and use product/location substitution in our sandbox system to see if we can get back only one line item. But even in that case we do get a sub item. Any help on this issue will be greatly appreciated. You can also send me an e-mail at [email protected].
>
> Thanks
>
> SDSAPCON
In the substitution reasons ...mark the OUTCOME as blank for this particular 0006. I am not sure for ATP
rgds
Sai
Edited by: Sai on Mar 27, 2008 10:00 PM

Product selection with outcome B

Hi all,
I would like to know which item category and schedule line category to be used if I am using outcome B in material determination functionality.
Can anyone help me with this configuration.
Regards,
Beena

Hi,
For product selection with outcome B, The higher level item category is TAX(Non stock item) with schedule line category CX(No inventory mgmt.).
Item category of product selection is TAPS (Std.Item PS) it comes with Schedule line category of PN( Selection without MRP) and PP (Selection with MRP).
These are all standards. If you would like to configure new item & schedule line category that is also possible for particular order type.
Hope, it is useful to you.
Regards,
S.Balaji

Cisco products and services comparisons

Wasnt sure where to post this...was hoping somebody could point me in the right direction...
anybody have any site, whitepaper, document of any kind that gives an outline of products and services comparison between cisco products and other network equipment (ie...vs Juniper, vs Brocade, vs Nortel, etc...)
thanks in advance.
Bruce

Hi Bruce,
If youre a partner you can access the partner portal which has a small bit of competitive info.
http://www.cisco.com/web/partners/sell/competitive/routing.html
http://www.cisco.com/web/partners/sell/competitive/index.html
Cheers,
Conor

Automatic Product Selection

Hello Everyone,
In automatic product selection, we can define many rules for material substitution.
Lets say a Rule is such:
If material A is not available, this is auto replaced by material B.
the list :
1. Material A
2. Material B
For this rule, I like to confirm that If material A IS Available, this substitution will not take place since it does not meet the criteria?
regards
Bass
SD Newbie

Your assumption is correct.
Read the link http://help.sap.com/saphelp_47x200/helpdata/en/a1/78267709e811d2956400a0c9306667/frameset.htm for details.
Regards,

Enquiry on RMA for Cisco Products

Hi,
Recently i ran into some issue when processing a RMA for Cisco 3925 router.
I've RMAed the chassis but the i got the part, it didnt have a system board.
When i contacted Cisco, they mentioned that the system board can/must be RMAed separately.
Is there any documentation or list for Cisco Products that has system board as a FRU?
Thanks

Recently i ran into some issue when processing a RMA for Cisco 3925 router.I've RMAed the chassis but the i got the part, it didnt have a system board.
Before the replacment part/unit is shipped, you always get a shipping document in an email. This document will list down what item(s) are being shipped.
Did you get this?

Product selection during TLB run with SCM 701 (EHP1)

Dear All,
We are on SCM 700 with EHP1.
I have activated the business frame work function using txn: SFW5 - SCM_APO_DP_SNP_CTM to include the product selection during TLB run. But I observed that product selection has appeared only in the TLB run (txn: /SAPAPO/SNP04) for background selection but not in the Interactive TLB run (/SAPAPO/SNPTLB).
How can get the product selection in Interactive TLB selection as well so that multiple planners can use the TLB sessions at the same time as long as products are not same.
Please advise & thanks in advance
Venkat DR

Hello Venkat,
I do not see the business function SCM_APO_DP_SNP_CTM when I open the txn SFW5. It only shows me enterprise business functions, which has ony CA, ERP, Financial functions. But not the ones I needed.
Can you pls tell me how to see that function ? And why these functionalities given to be activated in SCM 7.0 ?
Thanks
Venkat

Material determination Vs Product selection

Hi
What is the difference between Material determination and Product selection ?
Regards
Mahesh

Hello Mahesh,
Material determination or Product selection
1. Material determination (sometimes referred to as product selection) is a method in SAP-SD to substitute or swap one material in the sales order for another using the condition technique and is triggered by the material entered in the line item of the sales order. Material determination can also use a pop-up window with a number of products the user can choose from the list.
2. Material determination can be automatic or manual and is used
 When an old product is becoming obsolete (outdated) and the business is releasing a new product in its place starting from a specific date. In this case the old item gets automatically replaced by the new item in the sales order.
 You may configure the system to automatically to swap one material for a number of other materials, the one material being determined based on which one is available.
 It is also possible to swap the material for a number of materials, where the user is presented to choose from the list.
 Material determination is specifically useful should you wish to swap your customers part number automatically for your own at the time of the sales order.
The functionality of manual and automatic product selection is available during material determination.
a. Reason for substitution 0005: manual product selection (list of default values)
b. Reason for substitution 0004 & 0006: automatic product selection (depends on product availability in order and delivery)
In manual product selection (0005), the system does not automatically replace the product. Instead, it displays a list of all the substitution materials and other information in the master record doing the availability check such as quantity available that can be confirmed on the customers requested delivery date and if the full quantity cannot be met, the system proposes a new date on which the material can be completely delivered. You can then select the required material from the list.
During automatic product selection (0004 & 0006) the system replaces the entered material automatically if it is not available. When you enter an order, the system tries to fill the quantity of the order with the first material in the material determination master record. If there is no enough quantity available then it fills the remaining quantity with the next material.
You can choose whether or not to run the material determination during the delivery process for the same material, as the result of the substitution may change due to the new availability situation of the material.
Reward if helps
Regards
Sai

CISCO products and TACACS+

Hi,
Which are the cisco products that supports TACACS+ ?
Also please tell me about logging mechanism for that cisco products, that means where TACACS+ stores log etc.
Thanks in advance...

Hi Shailesh,
What is the end objective? If you could elloborate on it
Regards
Minakshi (do rate the helpful posts )

Need help cisco products.

i've got an request from an ISP for a cisco product but i really can't find a solution on Cisco web site or maybe i'm to blind to see what the product is?!!!
Product Description:
PGW 2200 Softswitch
MGC-X42K-AC216-2
PWG2000-UPG-TO-9.7.3
SFB22-upg-CC-9.7.3
SWP22-SIP-RTU
can anyone please help me define this product, i see its end of life but whats the successor of it?? thanks you...

Dear Shala,
We're happy to offer our product SVI_MGC which can not only act as a replacement for the PGW but can also provide Media Gateways Controller functionality for other 3rd party gateways such as AudioCodes & Lucent TNTs etc. Our product has been deployed in more than 50 countries around the world and our customer list includes names like Vodafone, Orange and many other Tier 1 & Tier 2 Telco's all over the world.
Please visit our website http://www.squire-technologies.co.uk/products/Cisco_SS7_Over_IP.php. for product information.
For further information and clarification please do not hesitate to contact me.
Kind regards,
Sanjeev Verma
Global Sales Director
Squire Technologies Ltd
www.squire-technologies.co.uk

RSS FEED FOR CISCO PRODUCT LAUNCHES

Get notified as soon as we launch new Cisco products.
See It in Action
What do you think about the RSS Feeds for Cisco products launches concept? Is it useful? Are there places on Cisco.com where you would like to see it? Do you think the idea should evolve into something different? Do you think this pilot should be dropped? Discuss it now.

I use it (just found it recently) and I like it. I would love to see one just for IOS features. It's nearly impossible to keep up on new IOS features (ie zone based firewalling) and I believe RSS would be a great help to us that use and sell Cisco products.

Can Prime Infastructure 2.1 support Non-Cisco Products? Import a MIB from a Non-Cisco Product?

I have an Non-cisco product that I which to manage by way of SNMP.
The product has MIB's so can PI support it, and can I import the MIB?
Thanks

You can design custom SNMP polling templates to monitor third-party or Cisco devices and device groups. Using this feature, you can:
Upload the SNMP MIB for the device type, then choose devices and attributes to poll and the polling frequency.
Upload a single MIB definition file, or a group of MIBs with their dependencies as a ZIP file.
Deploy the custom SNMP polling template the same way as other monitoring templates.
Display the results as a line chart or a table.
This feature enables you to easily repeat polling for the same devices and attributes, and can be used to customize the way Cisco devices are polled using SNMP.
You can create a maximum of 25 custom SNMP polling templates.
For more details on how to create custom SNMP Template, please the user guide.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Dwdm cisco product selection

Similar Messages

Maybe you are looking for