Dwf's from 3D Studio Max

I am trying to import a dwf exported from 3DS Max 2010 into Acrobat Pro Extended. The file previews fine, but I get an error because apparently Max doesn't have any 'Layouts' associated with the dwf and you need at least one layout for the file to import properly. Is there a way to import a dwf without and 'Layouts'?
thanks

Hi and welcome to Discussions,
Autodesk is correct on this one.
With lite use of 3DS Parallels would be sufficient but the more complex your project gets the slower it will be in Parallels Windows.
Since BootCamp allows Windows and 3DS to use the Mac hardware natively you won't have that 'problem' with it.
So personal I would propose to use BootCamp right from the start and not some time later when you have reached the limits with Parallels.
The BootCamp Assistant in OSx which is used to partition your harddisk for the Windows installation also lets you completely delete the Windows partition later on when you are done with it and also adds the diskspace used for the Windows partition back to your OSX.
Have a look at the BootCamp Installation Guide plus the FAQs Apple provides on BootCamp.
All can be found here http://www.apple.com/support/bootcamp/
Regards
Stefan

Similar Messages

Blurry Text from DVD Studio Pro

Hello, I've created 4 'slide show' type presentations in motion 2. Project settings are:
Width: 1360
Height: 768
Bit Depth: 8 Bit
Pixel Aspect Ratio: HD (960x720, 1440x1080) 1.33
Field Order: None
Frame Rate:59.94 fps
Render Settings:
Motion Blur: Samples: 8
Shutter Angle: 360
Output: Antialiasing Method: Best
I've tried many many compression settings:
MPEG-2 6.2Mbps 2-pass 16/9.m2v
Uncompressed 10-bit NTSC.mov
Importing raw motion files into DVD Studio Pro
All of the resulting dvds burned from DVD Studio pro look pixelated and blurry when played on a dvd player onto a Toshiba 32HL86. Unfortunately its an SD dvd player connectedt to the tv, so not sure if that has a major impace.
DVD Studio Pro Settings are:
Project: SD DVD
Video Standard: NTSC
General:
SD DVD Menus, Tracks and Slideshows:
Display Mode: 16:9 Letterbox
Encoding:
MPEG-2-SD
Aspect Ratio: 16:9
Field Order: Auto
Mode: One PAss VBR
Bit Rate: 6.8
Max Bit Rate: 8.0
Motiion Estimation: Best
I am at my wits end, can somebody tell me what I'm doing wrong?

I'm not an expert, but have recently had similar problems with graphics that had text, black lines, lots of contrast, and movement. They looked great on HD but when I made a SD DVD, they were very blocky and pixellated - completely unusable. After lots of experimentation, I've finally got an acceptable dvd. Went back to my original shots - in Final Cut, (I'm not sure if you can do this in Motion) and carefully applied a little Gaussian Blur (.25 to1) to each according to how badly they pixellated. Also adjusted blacks and whites so they weren't so contrasty. Then made my mpeg with Compressor - two pass vbr, 6.8 mbps, best motion estimator. The Gaussian Blur seems to break up the areas that get blocked up and pixelated. SD dvd is such a lousy low resolution medium anyway, that it doesn't seem to result in any focus problems and helped most shots - I've even gone back and applied it to some of the regular footage that was pixellating. It was a lot of work, you may want to see if an expert weighs in on this.

How to install Autocad programmes? Like 3d studio max? WINDOWS IN MAC? HOW?

Hello,
I am planning to buy Macbook Pro with 8GB and i5 processor for architectural purposes to run programmes smoothly like Autocad and 3d Studio max for rendering plus other graphic programmes from Adobe.
1. What should i include in my package of Macbook Pro to install and run these programmes without doubts and problems, not to waste my money? Maybe instead of Mac i should go for proper Microsoft Windows PC like DELL. But i would prefer Mac anyway.
2. I have heard about Bootcamp? I don't know what is it? Is it supplied with Macbook Pro package? Where can i get it from?
I have also read that to run these programmes i should install Windows on Mac, but the thing is i want to run away from any Windows as Im not happy with this system. This is why I am considering Mac system, which does not freeze on first instance. Where do i get windows on mac? In mac shop? No idea what to do.
3. If i succeed installing 3ds max and Autocad and Adobe, do i run them on mac or windows system, when using daily?
4. I am scared to buy Mac as I am not sure if these programmes work correctly.
5. Please give me some instructions what to do after buying Macbook Pro in terms of preapring my computer for rendering and drawing in cad programmes.
6. Which mac system shall i choose?
I would be grateful to each of you a professionalist or any man, whose knowledge is at high level and competency. I really need your help. PLEASE HELP!!!

Number 1 do you need a laptop? 3DS Max likes beefy hardware and especially high end graphics cards like Nividia’s Quadro series. These card are difficult and expensive to get on a laptop.
I run 3DS Max on my MacBook Pro and also on a more beefy Windows machine with Quadro card at home.
When scenes get complex and big the MacBook pro struggles to manipulate and rotate objects on screen, as it does not have the hardware.
If you do get a MacBook Pro don’t forget you will need a 3 button mouse, not the Apple one as you know there are functions you need to do in Max that require you to press more than one mouse button at a time an Apple mouse will not do that.
Have a look here for Boot camp help http://support.apple.com/kb/HT1461

Anybody using 3d studio max 4?

hello,
can you use 3d studio max version 4 under windows xp pro? i'm having problems, it says that the cd blah blah is not supported with this version of windows, but i know i run this before
thanks,
edison

hello bim2k,
i downloaded the newer version of c-dilla from discret's website, and i installed it, i dont get the error anymore but while 3ds max is initializing, a window popped out, it said that 3ds max has to shut down, just like the one you see when there's an error in windows and windows xp asks you if you want to send report to microsoft, this message also popped out. so i have to close 3ds max, but if i just ignore it, 3dsmax would start and i could use it but with the presence of the annoying window :(
after that, i also tried the instructions on the link you gave me, with no luck, same thing happened, but atleast i could use 3ds max, i also tried installing the newer version of c-dilla, same thing also...
thanks,
edison

Error in starting server from NetWeaver Studio

I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:29 PM
Edited by: Sahir Pathan on Jul 14, 2008 5:37 PM

Maybe when you are on netweaver studio, the instance number passed is the java one instead of the abap instance one :
sidadm> sapcontrol -nr 01 -function J2EEGetProcessList
27.02.2009 17:13:02
J2EEGetProcessList
OK
telnetPort, name, pid, type, restart, exitCode, state, startTime, elapsedTime, restartCount, errorCount, cpu, debug
0, SDM, 11557, SDM Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:14:36, Switched off
50108, dispatcher, 11555, J2EE Dispatcher, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:24:21, Disabled
0, server0, 11556, J2EE Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 1:16:31, Disabled
sidadm> sapcontrol -nr 11 -function J2EEGetProcessList
27.02.2009 17:13:17
J2EEGetProcessList
FAIL: JsfOpenAdmin failed: object not found
sidadm>

SQLE_COMMUNICATIONS_ERROR while running SFA application from Visual Studio

Hi,
I am trying the SFA (Sales Force Automation) example.
I am using the Windows Mobile 6.0 emulator from Visual Studio to run the application.
When I go to the "Configure" button, change the configuration values and try to Save, I am getting the following error.
=======
SQLE_COMMUNICATIONS_ERROR
iAnywhere.Data.UltraLite.ULException: SQLE_COMMUNICATIONS_ERROR at iAnywhere.Data.UltraLite.ULConnection.RuntimeError(IntPtr natKey, ULSQLCode code, Object p0, Object p1, Object p2) at iAnywhere.Data.UltraLite.ULConnection.RuntimeError(ULSQLCode code) at iAnywhere.Data.UltraLite.ULConnection.Synchronize() at SalesForceAutomation.SalesForceAutomationDB.Synchronize(String synchronizationGroup, SyncStatusListener listener) at SalesForceAutomation.SalesForceAutomationDB.Synchronize() at SalesForceAutomation.FormConfiguration.menuItem1_Click(Object sender, EventArgs e) at System.Windows.Forms.MenuItem.OnClick(EventArgs e) at System.Windows.Forms.Menu.ProcessMnuProc(Control ctlThis, WM wm, Int32 wParam, Int32 lParam) at System.Windows.Forms.Form.WnProc(WM wm, Int32 wParam, Int32 lParam) at System.Windows.Forms.Control._InternalWnProc(WM wm, Int32 wParam, Int32 lParam) at Microsoft.AGL.Forms.EVL.EnterMainLoop(IntPtr hwnMain) at System.Windows.Forms.Application.Run(Form fm) at SalesForceAutomation.Program.Main() Details: StreamErrorCode = SOCKET_CONNECT StreamErrorSystem = 10061 StreamErrorParameters =
======
I am unable to sort out this.
Any help would be highly appreciated.
Thanks in advance.
Regards,
Ram.

Hi,
Finally I fixed this issue.
I ran the SybaseServerSync.v35.CAB on the device emulator. Then tried the program. It worked. This helps establish the synchronization between the device and the SUP server. This CAB file can be located at the path <UnwiredServerInstallationLocation>\UnwiredPlatform\ClientAPI\RBS\WM\ServerSync.
Regards,
Ram.

Error in jdevelper 11g when opening a project exported from bpm studio 10.3

Hello I hope someone can help me with this error, thanks in advance.
I installed soa suite 11G (including ps2) but when i open a project exported from bpm studio 10.3 i have the following error.
"An unexpected severe error has ocurred in jdeveloper"
Performing action JDeveloper Forum[ from oracle.ide.log.MessagePage ]
Performing action About[ from oracle.ide.log.MessagePage ]
Invoking command: [ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.bpm.fusion.ui.editor.FusionEditor ]
Performing action Open...[ from oracle.ide.ceditor.CodeEditor ]
Performing action Close All[ from oracle.ide.ceditor.CodeEditor ]
Performing action Import...[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
Jul 15, 2010 1:36:03 PM oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader load
SEVERE: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
......................... .... >
javax.xml.bind.UnmarshalException: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
<{http://www.omg.org/bpmn20}userTask>

Hi,
I have the same error. Please if you have the solution or any workaround, i 'll very appreciate if you post it here
Thanks in advance!

"Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it." occurs while deploying from Visual studio

HI,
I get this error "Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it. " when deploying my project from visual studio 2010 to
SharePoint 2010 site. I tried restarting IIS, but it didn't help. This application used to work fine until the server crashed during the deployment process. All the other applications on the same server works fine also. Any ideas how to fix this issue?
Thanks in advance,
AM

Hi
AM ,
Thank you for your posting!
According to your error message, it says your solution does not have a WSP file associated with it. Take a look at the file system. After you Right Click -> Deploy Solution on the VS Solution, there
should be a .wsp file at <Solution Directory>\bin\<debug|release>.
Also the error can be occurring when the developer try to deploy solutions over pre-existing solutions with material changed in the solution. Go to your Central Administration Site and then
Operations and then Solution Management. Make sure that there not already a solution with the same name deployed or installed there. If there is, remove it and try deploying again.
And you could look in logs and find if there is a below error in ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS).
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Calling CVI DLL Function from Visual Studio

HI all ,
Iv'e created a DLL using CVI and i'm tring to call one of it's function from visual studio 6.0
I'm getting a general error , is there a specific prototype that i need to set my functions in ordrer to call them ?!
Kobi Kalif
Software Engineer

You will need to distribute the CVI RTE along with your DLL, since anything you write in CVI is going to use the RTE.
As far as calling the DLL functions, you can use the CVI defined macros
<return type> DLLEXPORT DLLSTDCALL <function name> (<param1 type> <param1> ...) {
to declare your functions in the DLL for access by a VS application.
for example
int DLLEXPORT DLLSTDCALL myfunction (int funparam1, double func param2) {
There are options for identifying which functions to export from your DLL, I use "functions marked for export" but there are other choices available. I also include a type library so when you type the name of a DLL funciton in VS6 you see a balloon popup with the function signature. This is a check box in the target settings. You have to create a ".fp" file (function panel file) to collect the function info for the library.
From VB6 you can access the DLL a couple of ways, but I usually add the DLL as a reference.

Error when starting server from NetWeaver Studio

I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:30 PM

Hello Sahir,
Can you post some other error logs ?
Regards,
Siddhesh

RFC call from NW studio

hi all,
    There is an error when I use SAP Connectivity from NW studio.
    1.I can see all the function listed.
    2.I choose one function (such as "BAPI_SALESORDER_GETLIST")and then clicked "finish" button.
    3.the error box jumped out "<objekt> <rfc><BAPI_SALESORDER_GETLIST> nicht gefunden".
    why?
    and the icon behind the function is an yellow triangle.

Hi pangpang,
In NWDS , while creating models (Adaptive RFC Models) , BAPIs , which are not yet released are seen as with this yellow triangle .
just release this bapi in R/3 and , do the model creation once again.
follow this link.
http://help.sap.com/saphelp_nw04/helpdata/en/a5/3ec9a44ac011d1894e0000e829fbbd/content.htm
                              Regards
                              Kishor Gopinathan

To load a object created with 3D Studio Max

Hello,
I am a new Java user. I have to realize an interactive presentation in Java of a three-dimensional object created with 3D Studio Max. I would like to know how I can load this object in my java project.
I should, in fact, allow the customer to modify the color of the object and to rotate it.
Many thanks
Massimo

Well, my first reccomendation is to look into Java 3D. I don't know anything about it myself, but it's the obvious place to look.

Problem printing PDF from BPM Studio ?

I'm using JasperReports to try to print a PDF from BPM Studio 10.3.2
I have tried many ways but always get the same problem:
Caused by: com.lowagie.text.pdf.PdfWriter.setRgbTransparencyBlending(Z)V
Caused by: java.lang.NoSuchMethodError: com.lowagie.text.pdf.PdfWriter.setRgbTransparencyBlending(Z)V
I added all the needed jars as external resources and catalog them as Java components.
Anyone dealed with this issue before?
Thanks in advance!
/Patricio
ps: sorry for my english, but isn't my native language.

Actually, Word 2013 supports opening of PDF files and creating Word documents from same. The problem is that for anything other than very simple PDF files, the conversion is wonky at best!
The popup mentioned by “bannerman” is definitely not an Adobe Reader message, but possibly an annotation of something generated by JavaScript.
- Dov

Not able to start HLM from HANA studio

Hi Experts
I have installed SAP HANA SP07 version with patch level 4 on one of the node of a 4 node server.
4 nodes   A B C D
on node A i have installed AP HANA SP07 version with patch level 4    and everyting is working fine form HANA Studio 8.2
on node B i have installed AP HANA SP07 version with patch level 4    HLM is not working with HANA Studio 8.2 and at oslevel to.
i did update to latest HLM version ie., sp7 patch12.
but still the same error.
welcome any suggestions.
Thanks
Kishore

Hi Sadanand
Thanks for your update.
I did start the HLM as following
#cd /hana/shared/<SID>/HLM
# ./bootstrap-hlm.sh
i got the following prompt
<hostname>:/hana/shared/<SID>/HLM> ./bootstrap-hlm.sh
There is bootstrapped HLM
Checking for running HLM...
There is no running HLM.
Configure /usr/sap/hlm_bootstraps/<SID>/HLM/hlm.sh
osgi>
and now i can seel HLM process running at os level.
but still not able to launch HLM from HANA studio and the following URL is not working
1) via browser: http://<host>:1129/lmsl/HLM/<SID>/ui/?sid=<SID>
This webpage is not available
Thanks
Kishore

Exporting Subtitle from DVD Studio Pro

Is there a way to export subtitles from DVD Studio Pro or Is there a tool somewhere that will generate an STL file from a DVD Studio Pro subtitle stream?
Thanks for your help!

Yes, other than the manual -- which I have exhausted. It gave me the coding for a text-based caption, and the coding for a graphic, but not the coding that would put both on the same clip (same time value).
However, I can manually go into the subtitle inspector and add whatever element (the text or the graphic) each with its own offsets, and have them appear flawlessly together. I am convinced there must be coding that generates this effect I can use in the STL file, but I have found nothing on the web, nor any of several downloaded manuals (including pp. 456 - 460).
Any advice?

Dwf's from 3D Studio Max

Similar Messages

Maybe you are looking for