DWM and PCManFM --desktop

Has anybody had any success trying to use pcmanfm as a desktop manager with DWM? I'm having a go now but no luck Is it possible, or should I just stick to plain dwm and feh for a background.

DWM doesn't support the hints that pcmanfm needs to draw the desktop window. If you're looking for an easier way to set the wallpaper (and don't want icons), I'd suggest nitrogen. If you want icons and the wallpaper, I'd actually recommend a different window manager - I don't think that DWM will work with icons on the root window at all.

Similar Messages

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible? Thanks

Yes. Yes. Yes.
Mylenium

Hp laserjet pro m1217nfw and remote desktop printing

hp laserjet pro m1217nfw and remote desktop printing, is there any issues with said function?

whats the problerm you are having??

VMWare Fusion and Parallels Desktop Benchmark Comparison

This is a quickie benchmark of VMWare Fusion and Parallels Desktop using Super PI, PC Mark 05, and Passmark.
VMWare Fusion 36932
Parallels Desktop 3094 Beta 2
Notes:
Both virtual machines were allocated with large 10+ GB virtual disks and 640MB of RAM. The VMWare CPU was configured with two processors. The Parallels CPU was configured with 1 (two is not available). VMWare reported the CPU as 1 physical, 2 logical processors running at 2.66 GHz while Parallels reported 1 physical, 1 logical processor running at 9.6 GHz (the combined speed of all four cores on the Mac Pro). The max observed CPU utilization in activity monitor when running under VMWare was 200% and max under Parallels was 173%.
I chose not to compare 1 VMWare CPU vs. 1 Parallels CPU. While Parallels does not support SMP or multithreaded processes on multiple processors the CPU utilization on the Mac went well above 1 core (173%). For this comparison, I wanted to see results of max processing based on what the two vendors have delivered, as opposed to benchmarking the underlying "virtual or hypervisor cpu" on a 1:1 basis. This explains why VMWare was 2x faster than Parallels on some CPU tests.
Both of these products are beta. VMWare is running in debug mode (can not be turned off in this beta).
Caveat emptor on these stats. This was an unscientific exercise to satisfy my curiosity. Some of the extraordinary differences are highlighted with <--.
Platform:
Mac Pro 2.66 GHz, 2GB RAM, Nvidia 7300GT
Disk 1 - OS X, 73GB Raptor
Disk 2 - dedicated disk where each virtual machine image was created separate from the OS or any OS-related virtual memory files.
VMWare and Parallels guest OS: Windows XP Professional, SP 2
Comparison Benchmrk
VMWare Fusion 36932 and Parallels Desktop 3094 Beta 2
Super PI Parallels VMWare
512K 8s 9s
1M 20s 21s
4M 1m 57s 2m 03s
PC Mark 05 Parallels VMWare
CPU Test Suite N/A N/A
Memory Test Suite N/A N/A
Graphics Test Suite N/A N/A
HDD Test Suite N/A N/A
HDD - XP Startup 5.0 MB/s 19.54 MB/s <--
Physics and 3D Test failed Test failed
Transparent Windows Test failed 69.99 Windows/s
3D - Pixel Shader Test failed Test failed
Web Page Rendering 3.58 Pages/s 2.34 Pages/s
File Decrypt 71.73 MB/s 67.05 MB/s
Graphics Memory - 64 Lines 179.92 FPS 111.73 FPS
HDD - General Usage 4.82 MB/s 42.01 MB/s <--
Multithread Test 1 / Audio Comp N/A N/A
Multithread Test 1 / Video Encoding Test failed Test failed
Multithread Test 2 / Text Edit 152.85 Pages/s 138.48 Pages/s
Multithread Test 2 / Image DeComp 5.91 MPixels/s 35.4 MPixels/s <--
Multithread Test 3 / File Comp 3.22 MB/s 6.03 MB/s
Multithread Test 3 / File Encrypt 19.0 MB/s 33.26 MB/s <--
Multithread Test 3 / HDD - Virus Scan 27.91 MB/s 25.49 MB/s
Multithread Test 3 / Mem Lat - Rnd 16MB 5.34 MAcc/s 6.63 MAcc/s
File Comp N/A N/A
File DeComp N/A N/A
File Encrypt N/A N/A
File Decrypt N/A N/A
Image DeComp N/A N/A
Audio Comp N/A N/A
Multithread Test 1 / File Comp N/A N/A
Multithread Test 1 / File Encrypt N/A N/A
Multithread Test 2 / File DeComp N/A N/A
Multithread Test 2 / File Decrypt N/A N/A
Multithread Test 2 / Audio DeComp N/A N/A
Multithread Test 2 / Image DeComp N/A N/A
Memory Read - 16 MB N/A N/A
Memory Read - 8 MB N/A N/A
Memory Read - 192 kB N/A N/A
Memory Read - 4 kB N/A N/A
Memory Write - 16 MB N/A N/A
Memory Write - 8 MB N/A N/A
Memory Write - 192 kB N/A N/A
Memory Write - 4 kB N/A N/A
Memory Copy - 16 MB N/A N/A
Memory Copy - 8 MB N/A N/A
Memory Copy - 192 kB N/A N/A
Memory Copy - 4 kB N/A N/A
Memory Lat - Rnd 16 MB N/A N/A
Memory Lat - Rnd 8 MB N/A N/A
Memory Lat - Rnd 192 kB N/A N/A
Memory Lat - Rnd 4 kB N/A N/A
Transparent Windows N/A N/A
Graphics Memory - 64 Lines N/A N/A
Graphics Memory - 128 Lines N/A N/A
WMV Video Playback N/A N/A
3D - Fill Rate Multi Texturing N/A N/A
3D - Polygon Throughput Multiple Lights N/A N/A
3D - Pixel Shader N/A N/A
3D - Vertex Shader N/A N/A
HDD - XP Startup N/A N/A
HDD - Application Loading N/A N/A
HDD - General Usage N/A N/A
HDD - Virus Scan N/A N/A
HDD - File Write N/A N/A
Processor Intel Core 2 9653 MHz Processor Unknown 2661 MHz
Physical / Logical CPUs "1 Physical, 1 Logical" "1 Physical, 2 Logical"
MultiCore 1 Processor Core Multicore 2 Processor Cores
HyperThreading N/A N/A
Graphics Card Generic VGA Generic VGA
Graphics Driver Parallels Video Driver VMWare SVGA II
Co-operative adapters No No
DirectX Version 9.0c 9.0c
System Memory 640 MB 640MB
Motherboard Manufacturer N/A Intel Corporation
Motherboard Model N/A 440BX Desktop Reference Platform
Operating System Microsoft Windows XP Microsoft Windows XP
Passmark Parallels VMWare
CPU - Integer Math (MOPS) 112.35 230.31 <--
CPU - Floating Point Math (MOPS) 280.46 588.33 <--
CPU - Find Prime Numbers (OPS) 446.37 676.99 <--
CPU - SSE/3DNow! (MMPS) 2118.56 4737.13 <--
CPU - Comp (KB/s) 2994.16 5952.34 <--
CPU - Encrypt (MB/s) 18.09 36.27 <--
CPU - Image Rotation (IRPS) 598.21 1184.41 <--
CPU - String Sorting (TPS) 2118.81 3672.59 <--
Graphics 2D - Lines (TPS) 220.71 25.15 <--
Graphics 2D - Rectangles (TPS) 189.74 61.8 <--
Graphics 2D - Shapes (TPS) 39.54 13.71 <--
Graphics 2D - Fonts and Text (OPS) 190.39 75.88 <--
Graphics 2D - GUI (OPS) 439.77 63.72 <--
Memory - Allocate Small Block (MB/s) 2533.83 2526.21
Memory - Read Cached (MB/s) 1960.5 1906.27
Memory - Read Uncached (MB/s) 1871.79 1826.08
Memory - Write (MB/s) 1687.81 1545.43
Memory - Large RAM (OPS) 60.99 46.37
Disk - Sequential Read (MB/s) 102.11 76.45 <--
Disk - Sequential Write (MB/s) 58.33 50.9
Disk - Rnd Seek + RW (MB/s) 51.4 40.4
CPU Mark 711.08 1432.72 <--
2D Graphics Mark 743.31 176.5 <--
Memory Mark 599.94 580.38
Disk Mark 766.11 606.7
PassMark Rating 557.27 637.35 

Thanks for posting these numbers - it's an interesting comparison.
I would expect the final VMWare fusion performance numbers to be quite a bit better than that of Parallels - they have almost a decade's worth of experience more than the Parallels folks in this arena, and a much larger development team to boot.
Once VMWare Fusion is released to the public, I think that you'll see a clearer distinction between the two products. VMWare will continue to appeal to the professional customer, with a more robust feature set and corporate-friendly features (and a correspondingly higher price tag); Parallels will fall more into the consumer/VirtualPC-replacement market. It will be interesting to see how Parallels will be affected when (and if) VMWare player is ported to OS X.
Interesting about the Parallels performance stats on a native partition - looks like almost enough reason to avoid the bootcamp partition approach altogether. Sharing a native windows installation with a VM in parallels is a pretty scary situation in any case, as the two environments have entirely different hardware configurations. Do-able, but there is some black magic involved (if you want to see an example of what I mean, try to move a windows installation from one machine to another w/different hardware sometime - it ain't pretty); I wouldn't try this in a production scheme unless I had REALLY good backups.

I am thinking about upgrading to PSE 13. How many computers can you install it on? I have a desktop at work and a desktop and laptop at home. I would like to install it on all three.

I am thinking about upgrading to PSE 13. How many computers can you install it on? I have a desktop at work and a desktop and laptop at home. I would like to install it on all three.

duplicate post, see:
Elements 13 questions (was P/)

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

I want to use my iPod shuffle with two computers I have at home: my laptop and my desktop. How do I do this?

I have an iPod shuffle. On the Apple Help it says that the iPod can be used with more than one library. Is this true? I have a laptop with a library on it and a desktop with another library.

I believe it's true for the 3rd and 4th generation iPod Shuffle, but not for the earlier generations.
B-rock

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

Adobe Application Manager Won't Open and CC Desktop failed to install

I am running Win 7 Ultimate. Adobe Application Manager Won't Open and CC Desktop failed to install on my computer after I signed up for Adobe CC tonight. I am currently using the CS5 suite (perpetual license) and do not want to uninstall any of the programs until I am successfully running the Adobe CC versions. The AAM gives me an error message saying that it failed to open when I select it, and the creative cloud installer fails to install. I have tried restarting my computer. Help? This is very frustrating. I am a student and use this software on a daily basis, and can't afford to not have these programs available when I need them.

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/
OR
Some download & install troubleshooting links
-Comodo Security kills download http://forums.adobe.com/thread/1460361?tstart=0
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version that runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info.

I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version thjat runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info. Any solution?

Thank for for your suggestions. Unfortunately they are of little help. I am running on Snow Leopard and the PalmDesktop works fine. However, I do not want to quit my PalmTungsten unit as it is my backup for all my important access information. If it cannot run on Mavericks and no other solution is at hand, I simply will not update my OS X, but work on my Snow Leopard as it is.
I do not know how on earth I can migrate the information from my Palm into another system, and then quit the PalmPilot. If you have any intelligent solutions to this I would appreciate an input. A manual copy and paste solution is not acceptable. I may however run it on Windows via Parallel Desktop, but it is a lousy solution, and demonstrates (again) the weakness of Apple's OS and lack of compatibility. I am not impressed by the OS X performance.
Thank your for your attention.

Page size that I have to put my site to see the same on a computer supports both laptop and a desktop computer ?

page size that I have to put my site to see the same on a computer supports both laptop and a desktop computer ?

The viewport on a computer is adjustable by the user. iWeb sets the viewport width to the page width that you chose in the layout menu. No matter what the end user does, the page width is static and a reasonable compromise for the width of a web page that will be viewed on these devices is 980 to 1024 px.
Safari on iOS devices cannot set the viewport. The viewport on mobile devices is fixed and its width depends on the orientation of the device. The iPhone in portrait mode has a viewport width of 320px. This means that the 980px wide iWeb built page will be squashed down to about one third of its desired size making it unreadable and difficult to navigate.
Setting the viewport meta tag so that width equals the device width is a futile gesture since Safari on iOS will do that anyway. Its only useful if you add some initial scaling like...
<meta name = "viewport" content="initial-scale=0.7">
In the case of a 980px wide website, the initial scale is about 0.3 so any value higher than this will magnify the initial view of the site.
Here's an example of a 980px wide page that has been given and initial scale of 0.7 which allows an iPhone user to see one column of a two column layout...

The upper part of the page is not opaque, and the desktop shows through. Thus, the menu bar is hard to read. How to remedy this?

The area behind the menu bar and the line above it, all the way across to the minimize, maximize and close icons is not opaque and the desktop and desktop icons show through. There is nothing I can find in Firefox Help to change this. Also, it would be nice if the menu bar could be made larger and more visible -- and if I could delete "Yahoo!" from the menu bar, leaving just the important items (File, Edit, View, History, Bookmarks, Tools, and Help). Any suggestions?

See:
*[[/questions/804050]]
Right click in a free space on your desktop. 
Left click on Personalization. 
There are four options in Windows 7 at the bottom of the screen, choose "Window Color and Appearance". 
Select a border color 
Uncheck: "Enable transparency"

How do i keep spam from coming to my inbox on phone, I am on a server and my desktop receives spam in the junk and spam boxes?

How can I keep spam and junk mail coming to my inbox on my phone? I am on a server and my desktop receives most of it in junk or spam mailbox. thanks

Contact your ISP to block SPAM.

[SOLVED] Thumbnail view of image files in Thunar and PCManFM

Hello all!
I have a question about the way Thunar and PCManFM handles thumbnails of image files. I understand that Thunar users can use the thunar-thumbnailers package to get previews of all sorts of different file formats. But on the thumbnailers page it is claimed that Thunar should be able to make thumbnails of JPEG's, PDF's etc. without this add-on. This is not happening for me even though I have evince, ImageMagick etc. installed.
Now, I tried to install PCManFM again after some time, since this used to be my fm-of-choice. And here, thumbnails show up for JPEG's, PDF's and what-else right away. So I opened Thunar again and browsed to the same folders I had visited with PCManFM, and this time Thunar gave me thumbnails as well!! But only for the files in folders I had visited with PCManFM
Is this expected behaviour? Is it a bug in Thunar? I want to keep using Thunar (I think), but I would also like this thumbnailing business to work automagically as it does in PCManFM. So I'm just wondering if I should report this to the Thunar folks, since they seem to claim that it should work without the -thumbnailers add-on, or if I should just install the -thumbnailers package and shut up ^^
Cheers
Last edited by mariusmeyer (2011-04-06 19:50:06)

Thank you! I installed tumbler and got thumbnails right away. This seems like the proper way to do it.
Cheers!

DWM and PCManFM --desktop

Similar Messages

Maybe you are looking for