DX650 cannot show caller ID name after speed dial is configured

Hi all,
Once I replaced my IP phone from CP-7975 with DX650, I found the incoming caller name display is missing for those caller phone numbers are configured as "one-button speed dial" on the DX650. For other callers calling to DX650, the caller name can be displayed correctly.
Anyone encounters this issue before and how to solve it?? Right now, DX650 is not mapped with the google account and other directory setting.
thanks,
samuel

Hello,
to resolve your issue go to home screen of DX650  and click Contact , then click serch icon  , enter the name of contact and aftar that click copy in my Conctacts Button.
Rollback to phone icon in home screen of DX650  ,click add new speed dial then selec your contact , click save .
and make a test , your probleme we will  resolved.
Regards

Similar Messages

  • Cannot End Call on Q10 after upgrading to OS 10.2

    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

    marootz wrote:
    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
    From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Caller Program name after SUBMIT or Call Tran (SAP-Query drill as ex)

    Hi ,  there is real simple situation
    I have SAP Query and do Drill Down to my Report or  Transaction.
    So I have two questions but as I believe they are equal:
    1) How I can get Caller SAP Query name from my Report ?
    2) How can we get  Caller Program name after SUBMIT or CALL TRANSACTION operator (in new started report for example )?

    Hi,
    there is a system variable sy-cprog ...check if u can use it...
    else from the caller prog move its name to SAP memory and retrive it in called prog..
    in caller prog
    data caller_prog type SYCPROG.
    move sy-repid to caller_prog.
    set parameter id 'ZCPROG' field caller_prog.
    submit <called_prog> and return.
    in called prog
    data caller_prog type SYCPROG.
    get parameter id 'ZCPROG' field caller_prog.
    write caller_prog.
    write / sy-repid.
    Cheers,
    jose.

  • I can't make or receive calls or text after I dialed *228, option 1

    I can't make or receive calls or text after I dialed *228, option 1 as instructed by tech support. The message said "Programming successful". I am a pre-paid only customer ($50/ month unlimited) LG basic flip phone. When I try to call anyone now, I get a Verizon recorded message: "We're unable to complete your call. To speak to a customer service representative hang-up and dial *611"  And *228, option 2 not helping either.

        Hi squiddlydiddly!
    I'm sorry you're having issues in making and receiving calls with your prepaid device. I would need to direct you to our Prepaid department for assistance.
    In order to reach a Prepaid Department representative, please call 888-294-6804. When prompted, enter your prepaid phone number. Then press 4, 5, 4 and enter the pass code for your account.  If you do not know the pass code, enter in four zeros.  Then the system will then transfer you to a Prepaid representative.
    Thank you,
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • My caller id doesnt show the callers name after switching to verizon

    Coming from an ATT 3GS, synced to itunes before activating my new verizon 4Gs.  Synced up with itunes.  My address book has all my contacts, but when I get an incoming call or text it only shows the number, not the name! This is extreeemely frustrating to say the least
    it seems like if i put a 1- before the contacts number in my address book, it will help somewhat.
    I've seen this question thrown around af ew places but have yet to find an answer
    HELP!
    Thanks

    Call the *228 number on your iPhone
    Then select option 1
    Then force quit out of your phone, text, &amp; contacts applications by double tapping on the home button then holding down a finger on the app until it starts to wiggle-click on the red and white minus signs
    Then reopen the app and retry

  • Nokia 5800 - cannot see caller contact name (one m...

    This is a repeat of the question asked and seemingly "solved" here:
    I'm starting a new topic cause the label for the topic mentioned above says "solved" in nice big green letters so people might miss this issue being raised again.
    I have a 5800 XM (RM-356, software V51.0.006) with 250+ contacts...
    The problem appears as in the case above, happens daily: I get a call from a number which is definitely in my contacts  (phone memory, not SIM) but I still just get the number displayed and not the name of the caller.
    Furthermore, if I then take the callers number as reported by my phone (with the '+' for international and all), and update the contact, nothing improves, same thing.
    It gets better : my wife has the same number for her cell phone and home phone, with a different area code (smart, eh?). There Nokia definitely confuses the two, only if I erase one of them then I get her name when she is calling, though the numbers are definitely different, e.g.:
    +38111XXXXXXX and +38165XXXXXXX (in the example the +381 is Serbia, and 11 and 65 are two different area codes).
    This issue is driving me nuts, and not because I can't recognize my wifes number , but because of the OTHER 250+ business contacts that I get calls from daily!
    I have tried everything, including doing a "hard reset" of the whole phone... not to mention it took me hours to get everything else but the contact list back to previous settings....
    What is wrong here?
    There has also been this advice on the Nokia forum :
    unfortunately, tried all of it, and nothing worked.
    To further complicate the matter, this problem appears only for a fraction of the numbers in my contact lists = some contacts I see names just fine when they call, and some I cannot get to show up no matter what...
    Many thanks for all your help!

    It is simply multiple entries, as you have no doubt read about, for example if you entered all your wifes numbers just to your wifes name, but as individual details they would work. So say the contact is Wife, select option edit, add detail, then you can have Mobile , home  and work numbers all attached to that one contact, and caller id will work, as long as you don't have several of her work colleagues as contacts with the same works number, the failure of caller id is always due to a conflict, as the phone can only identify the number (the incoming info) and if that is attached to more than one person it just gives out the number. 
    To resolve the problem you need to find and remove the conflicts !
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • E71 doesn't show caller's name

    Today I noticed that my E71 doesn't show any names when somebody calls me, neither does it show any names with text messages (SMS). It shows just the number. 
    It doesn't show any name, I tried it with 10+ different people, both calling and texting. 
    I have no duplicates in my address-book. I didn't add anything in the last 3 days. Yesterday everything worked just fine. I have no '(unnamed)' entries in my address-book either. No empty entries either. I didn't sync my phone with my pc (via Nokia PC Suite) since last week.
    I tried the short codes for incoming caller ID:
    Incoming CLI Presentation (you see the caller's number)
    Allow: *30#[GREEN CALL KEY]
    Prevent: #30#[GREEN CALL KEY]
    Query default: *#30#[GREEN CALL KEY]
    The Query default gave back that it does show CLI. Just to be sure I've sent the Allow code once more. It confirms that it now does show CLI.
    It does show the number, but it doesn't show the name.  
    My provider is Telfort (Dutch). 
    All help / information appreciated! 

    Have you numbers stored on the sim card? If there is no duplication whatsoever, and none of the other suggestions in the link I posted you helps, then the only other thing I can suggest is to reset your phone and see if that works. Only thing is that wipes all yout data so you need to backup and restore.

  • Terminal shows old computer name (after migration)

    After using migration assistant (over Ethernet) from a 2007 mini to a mid-2011 mini:    the Terminal shows the old computer name in the prompt.
    (Many other oddities -- every file action brings up "Finder wants to make changes" and requires a password, to move or copy or delete any file).    I see this problem has been reported before over the  years but I did not find any answer that didn't have further questions

    Aha, changing it in "Sharing" seems to have worked for me (suggestion from 'Kappy' in the 2008 "Re: Migration: (UNIX) thread, although it did not work for others in that thread at the time):

  • Possibility to show caller's name when calling to ...

    Hello,
    when i call from skype to mobile number, receiver sees me as unknown.
    How can i change it to my name or phone number?

    Hi, Lex..., and welcome to the Community,
    Here is a link to the FAQ article which explains how to set up Caller ID:
    https://support.skype.com/en/faq/FA1248/what-is-caller-identification-and-how-do-i-set-it-up
    Here is a link to the library of FAQ articles for all Caller ID topics:
    https://support.skype.com/en/category/CALLER_IDENTIFICATION/
    Caller ID is not one of those systems which can be guaranteed.  Community Contributors WD9EWK/Patrick and Neil have detailed the vagaries of networks not transmitting caller ID data, and so on.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • IPCC Set Enterprise Data Caller ID Name

    I am familiar with setting DNIS information in IPCC but am trying to figure out how to capture the Caller ID NAME information so that I can pass it back out to the agent desktop popup. I can do DNIS etc, but cannot find Caller ID NAME that is being passed on the call manager. Any ideas or references?
    Thanks

    This function is available in CRS/ICD 3.x version where you can have screenpop with infomation from the caller pass down to the agent desktop program. This software can be downloaded from software center in cisco site.
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801c6748.shtml

  • Caller ID name display

    How do you set a 7941 to show Caller ID name as well as the number? It is coming in to the system but not being displayed on the phone.

    can you bring more details please?
    If you have Call Manager or CME, and the Caller ID Name is from another ip phone or PSTN Line.
    Thanks.

  • Bluetooth and Speed Dial Issue

    I just got a new 8830, and have updated to latest software - 4.5.0.77, and am having two problems I can't find answers for.
    Bluetooth - I enable Bluetooth;  it works fine.  After I power down and up again, the Bluetooth is disabled and has to be enabled again.  Why does it not just stay enabled?
    When the phone is locked (enterprise server), I can't use the speed dials, even though I have the phone set to Allow Calls when Locked.  I can make calls, but not use speed dial.
    My old 7130e allowed did not these things.  Are there ways to fix these?
    TIA...
    Peter

    Hello and welcome to the forums;
    Are any of your contacts assigned to the Z or B keys? If so, try reprogramming those contacts temporarily to another key. Also, have you tried un-assigning a speed dial and then re-assigning it to see if the speed dial comes back?
    Hope this helps,
    TreoAide

  • Freetalk-1200 Connect.Me speed dial problem

    Just received my long awaited Connect.Me and it's been working just as I expected. The only problem I encountered was that I couldn't assing speed dial numbers to 2 of my contacts. Others work perfectly, when I click them, box of information appears to the middle of the screen, but when I click one of the two with the problem, nothing happens.
    I have tried everything like resetting from the button and from the web UI, deleting and adding them again to my contacts but nothing helps. Adding new contacts works fine. I would not rather create a new Skype account for my self - nor ask these two friends to make a new account for themselves - just because of this problem. Any kind of advice is welcome
    Cheers from Finland!

    Skype hasn't supported speed dials in it's software for some time.  It's considered a legacy feature. The use of speed dials is configured through the Freetalk Connect Me web interface, not the Skype client.  You need to sign into your Connect Me device via your web browser and click on "Contacts and Speed Dials".  Once there all your contacts will be listed on the left pane.  Select any one of those contacts and click "ADD TO SPEED DIAL".  It will assign a speed dial number incrementally on the right pane.  You can change that number to a number of your choosing (0-99) at any time.  That's all it takes to set up.  If you recently add a contact it my not show on that list.  If it doesn't sign off the client in which you added the contact or contact changes, then power cycle the Connect Me box and log back in.  It should update.  If it does not, the only other alternative is to do a factory reset on the unit so that it will purge the list and updated it with the latest copy.  Below I attached an image of the screen, though it may take some time until it gets approved and displayed to the general public.

  • Speed dial on the Lumia 820?

    I cannot find anywhere how you set speed dial on the Lumia 820? can this be done

    @ lynnai41 - You may go to your contact list, select the contact and long press on it .. then select 'pin to start' and the contact tile will be pinned to the home screen. Else, you may search for 3rd Party applications (search for 'speed dial' ) at the MarketPlace.

  • Difference between Speed Dial & Fast Dial & Abbreviated Dial

    Our company is installing callmanager with a few IP phones (7841, 8831, 8945).
    I am documenting how to use the phones.
    Based on the user guides for these phones, I cannot tell what the actual difference is between Speed Dial & Fast Dial & Abbreviated Dial.
    Does anyone have any guidance on this?
    Thanks.
    Mac

    We have 7945's and 65's but by the looks of your phone you have a directory button.
    The speed dials are configured on an available button on your phone.
    The abbreviated dials are setup in your self service console as speed dials and are only available on the phone you are setup on. you press the number you configured and hit the abbrDial softkey and it dials.
    The fast dials are available in your personal directory which will follow you to any phone as long as you enter your login. When you view your personal directory you can look at your contacts and you can tie your contacts to a fast dial number.
    It's been 6 mo so i'm sure you might have found this already :)

Maybe you are looking for