DX650 with CCME version 10

I know that CallManager Express (v 10) does not support CP-DX650-K9= desktop phone and it will be supported on CallMnager Express (v 10.5) once it is lunched. But i would ask if it is possible to add DX650 as a 3rd party SIP phone on CallManager Express v10 even if not all features will not work also i would ask if the Android will work if it is registered as 3rd Part phone or not??
Please if it is possible please provide me the the configuration steps

I am not sure if it can be registered as 3rd party phone but you could try the fast track approach:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.pdf

Similar Messages

QCT with CCME 4.2

Dear Voice Experts
Try to configure a CCME 4.2 on a router 2821 with latest QCT version 3.0.1 cause it would reduce a lot of work for command configuring.
But always get problems that none of the included phones in QCT are compatible to CCME 4.2
Any suggestions - cause i thought workaround will be to downgrade IOS for QCT of 4.0
But that's not really an longterm solution.
Do you plan to publish a new QCT Version ???
Many thanks and greets from Vienna
Helmut Schranz
[email protected]

Hi hadbou
I mean the combatibility of the piece of software "Quick Config Tool" for CCME what helps you to configure CCME easier.
You find the tool with the link : http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_data_sheet0900aecd802e9be9.html
Changeing the CCME version when i have to configure a piece could not be the solution ?
Thanks and greets
Helmut

I have installed Firefox4 to find it is not compatible with my version of OSX how do I get version 3.6 back or do I just give up and use Safari?

I downloaded Version 4 and installed it. At no point did it say that it was not compatible with the version of OS X that I am running (10.4.11) now that it is installed it will not open but it has already up graded from 3.6 so I have lost the lot. How can I download a version of 3.6 so that I can use it again or should I just pack up and use Safari as all I can get from your site is version 4. HELP!!!

Go to this link and find your language:
http://www.mozilla.com/en-US/firefox/all-older.html

Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
Maybe there is a newer setup installer? But I can't find it.
[10:42:54]: Error:
:Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read returned true. so far, this is OM DB, not an empty DB
[10:42:54]: Debug:
:Connection was not open. We will try to open it.
[10:42:54]: Debug:
:SqlConnectionReady returned True.
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read did not return true. The MG is missing. This is not OM DB
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Always:
:Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.

Never mind, found it!
Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
CLR Types for Microsoft® SQL Server® 2012 and now it works!!

WHEN TRYING TO OPEN FIREFOX, GET MESSAGE PATFORM VERSON 8.0 NOT COMPATBABLE WITH MIN VERSION 7.D MAX VERSION 7.D

I AM TRYING TO OPEN FIREFOX, AND GET A URL MESSAGE: PLATFORM VERSION 8.0 NOT COPATABLE WITH MIN VERSION 7.D MAX VERSI 7.D

If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

Photoshop CS2: "file not compatible with this version of Photoshop" error

So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
OS: OSX 10.4.11
Photoshop CS2
Info:
Kind: Adobe Photoshop file
Size: 394.4MB
Created: December 13, 2007
Modified: Yesterday at 3:54 PM

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please
cease and desist immediately
in the event you are currently experiencing problems with one or more files.
Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the
CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

In the Music tab of iTunes, do you have 'Include Voice Memos' checked?

UDI-00018: Data Pump client is incompatible with database version 11.2.0.1

Hi
I am trying to import data in Oracle 11g Release2(11.2.0.1) using impdp utitlity and getting below errror
UDI-00018: Data Pump client is incompatible with database version 11.2.0.1.0
Export dump has taken in database with oracle 11g Release 1(11.1.0.7.0) and I am trying to import in higher version of the database. Is there any parameter I have to set to avoid this error?

AUTHSTATE=compat
A__z=! LOGNAME
CLASSPATH=/app/oracle/11.2.0/jlib:.
HOME=/home/oracle
LANG=C
LC__FASTMSG=true
LD_LIBRARY_PATH=/app/oracle/11.2.0/lib:/app/oracle/11.2.0/network/lib:.
LIBPATH=/app/oracle/11.2.0/JDK/JRE/BIN:/app/oracle/11.2.0/jdk/jre/bin/classic:/app/oracle/11.2.0/lib32
LOCPATH=/usr/lib/nls/loc
LOGIN=oracle
LOGNAME=oracle
MAIL=/usr/spool/mail/oracle
MAILMSG=[YOU HAVE NEW MAIL]
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
NLS_DATE_FORMAT=DD-MON-RRRR HH24:MI:SS
ODMDIR=/etc/objrepos
ORACLE_BASE=/app/oracle
ORACLE_HOME=/app/oracle/11.2.0
ORACLE_SID=AMT6
ORACLE_TERM=xterm
ORA_NLS33=/app/oracle/11.2.0/nls/data
PATH=/app/oracle/11.2.0/bin:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.:/usr/local/bin:/usr/ccs/bin
PS1=nbsud01[$PWD]:($ORACLE_SID)>
PWD=/nbsiar/nbimp
SHELL=/usr/bin/ksh
SHLIB_PATH=/app/oracle/11.2.0/lib:/usr/lib
TERM=xterm
TZ=Europe/London
USER=oracle
_=/usr/bin/env

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10. I get the message "Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problem

Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

TS4036 I've got a new iPad I'm trying to do an iCloud back up but keep being given the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad. How do I restore I cloud on my new device?

I've got a new iPad and am trying to do an iCloud backup but keep getting the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad.
How do I restore info from iCloud onto my new device?

You would have to update your device first, before you can restore your iPad from your backup. Resolution: set it up as anew device, then update your device to the latest version "Settings > General > Updates", then reset your device again "Settings > General > Reset > Erase All Content and Settings" and then after the iPad restarts again, choose to restore your device from your backup.

HP Smart web printing is very useful web printing extension which is not compatible with any version of firefox till now but compatible with Internet Explorer any version. So Please do correction. Thanks

[There is a link below from where software can be downloaded and after installing this you will see that it is not compatible with any version of Mozilla Firefox of any Window version (7, XP).]
[http://ftp://ftp.hp.com/pub/softlib/software10/COL20395/dj-56929-3/HP_Smart_Web_Printing_v4.6.exe

It is up to HP to make that program compatible with Firefox.
That application last worked in Firefox 3.5, but HP was always very lax in updating it for a new version of Firefox. Usually they didn't bother to update it until like halfway through the "run" of a particular Firefox version. It worked for like 6 months and then a new version of Firefox was released, and it didn't work for like 6 months until HP got around to fixing it - then the cycle repeated.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

DX650 with CCME version 10

Similar Messages

Maybe you are looking for