DXG 565V not agreeing with iMovie...

Dunno if this is the right place to post this, but...
I just received a new camcorder for Xmas, and tried connecting it to the computer. It pops up on the desktop and I can access .avf files or something along those letters, and iPhoto opens but doesn't read anything off the no-name camera. iMovie won't work with it at all. The camera claims to tape DV, but connects through a USB cable. The CD won't work with Mac. Is there anywhere I can download a mac driver for it, or should I just try and pull the files off the device in the Finder and try to convert them?
Happy Holidays, by the way.

hyperangel0016 wrote:
.. DXG 565V.. The camera claims to tape DV, but ..
wrong info..
according to this source, http://www.retrevo.com/s/DXG-DXG-565V-Camcorders-review-manual/id/21395ag224/t/1 -2/ your device is records on flash mem => not compatible with iMovie version 5 (topic on this board...).
maybe, if you purchase iLife08 and you own an Intel Mac, you're lucky to handle those files..

Similar Messages

Error: Result of agent resolution does not agree with agents of task

Hi,
I'm getting the error "Result of Agent Resolution does not agree with agent of Task". I'm passing the agents in Expression which I'm getting from Method in my previous step and passing to workflow container and it is getting passed to Expression. The userid is present in that container. And the Task is assigned as General Task but still I dont know what might be the problem. The ID is with 'US' prefix. Even if I give the userid directly in the Task, it shows the same error.
Regards,
JMB

Hi
Incase you are using different clients for development and testing, make sure in testing client, task is assigned as general task.
You may check the way the userid is passed. Please note that the US is object type and Object ID(user id) is different. Both of them should not be part of one string. So while you test, just pass the user id without a prefix US. Hope it will work for u.
Regards
Waz

Result of agent resolution does not agree with agents of task

Hello Experts,
I am trying to configure a workflow for Employee Travel expense, the Business object am using is BUS2089 for event CREATED.
And am configuring workflow task WS20000040 (Approve trip). and in the work flow builder I am assigning User as an Agent and fixing it to a user say "USER1" for Task 404 (Check trip facts) and for Task 416 (Approve trip facts) again am assigning User as an Agent and fixing it to user say "USER2"
Now when the Trip is saved using PR05, this work flow is triggerred - which is what i want and it sends work item to USER1, now when USER1 says Trip facts are consistent the work item should go to USER2 but here it is failing and the log says "Agent determination for step 0000000416 failed" and details say "Result of agent resolution does not agree with agents of task" which is SWF_RUN 544
Can you guys help me by telling where am going wrong. Am i missing some configuration somewhere.
I have changed the Task properties - Attributes i have changed the task as a General Task,(i did it by navigating through Control Tab of the task)
appreciate your response.. Thanks
Usman

Thanks Novjot
I made the task as a general task and i see a gree light adjacent to it, but still it doesn't work.
the way i made it as a general task is as follows:
1. in the navigation area - select task 416
2. In the right hand side, on Control Tab in Task properties, click on the Red button and maintain Agent assignment
3. In Agent Assignment change attributes to General Task - instead of General Forwarding allowed.
save and activate, and generate runtime version
Is this correct or any other way?
Thanks
Usman

Why is a video clip from iphoto not compatible with imovie?

i have a video clip in iphoto and when i try to add it by dragging it into the videos in imovie, it says "the file will not be imported. it is not compatible with imovie". this video clip was taken with my friend's point and shoot type camera, then put on her computer, then put on a flash drive, then put on my computer. thank you so much for any help!

Welcome to iMovie Discussions.
Some "..point and shoot.." cameras create movies in an iMovie-compatible ".mov" format, but others create .avi files, or they record in the MPEG-1 format which iMovie can't unscramble.
Not all point and shoot movies are compatible with iMovie, even if they play using Apple's QuickTime movie player which iPhoto relies on.
These non-compatible movies need to be converted to .mov format, or some other compatible format such as DV or AIC, before trying to import them into iMovie. If you have QuickTime Pro, you can just open the movie clips and then use 'Export' to save them in the .mov format.
..More details from me - or others - later; I'm dashing out right now for a bite to eat..

External Drive not compatible with iMovie

I just purchased a WD My Book 500gb drive to store home videos I'm editing in iMovie. The drive shows up in the event library with a yellow triangle with an exclamation mark in the center. If I try to drag events to the drive I get the following message "volume is not compatible with iMovie." I have searched the discussion board, but have only succeeded in totally confusing myself. I'm sure this is probably a simple matter, but I can't seem to untangle it... Please help.

Click here and follow the instructions.
(43641)

Agent resolution does not agree with agents of task

Hi Guys,
I extended B.O-IDOCAPPL to ZIDOCAPPL to catch the inbound error for the IDOC.
The workflow gets triggered correctly when we get the inbound error.
In the workflow i created a custom display method....this is a dialog method. Now when the workflow comes to this point it gives the message in the technical log
<i>" Result of agent resolution does not agree with agents of task" </i>
<b>Now instead of calling this method if i just put a user decision it shows up fine in the users inbox.</b>
I have tried SWU_OBUF , Refresh from SWUS , Refresh from Inbox
Nothing seems to work, anyidea as to what's happening here ?
Message was edited by:
Abhishek Dhoundiyal

I have tried :
1.) hardcoding user ID
2.) using a role
3.) using WF initiator...
This is set up as a general task......
One interesting observation that i had... (If the below is irrelevant please ignore)
If i run the task via SWUS it executes but still does not evaluate the agents.. and then if i execute the workitem in SWIA it lets me execute...
Now if i trigger the workflow it executes but still does not evaluate the agents but it does not allow me to execute the workitem in SWIA , the technical log says workitem not found.

Error " Selected numbers does not agree with transferred"

Hi,
While in production support I got a issue saying
Error " Selected numbers does not agree with transferred"
How to solve this.
Regards
San Reddy

Hi,
This doesnt mean that its a failure.
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - Job log can also be helpful.
In your case its probably because of tRFC issue.
Check SM58 / BD87 for pending tRFCs.
Thanks,
JituK

Field catalog does not agree with the fields of the functional area

G'day everyone,
I am using a generic extractor via infoset to extract data from R/3 source system.
Using RSA3, I have obtained an error message and no further details.
****ERROR MESSAGE
"Field catalog does not agree with the fields of the functional area
Message no. RSUQ134
****ERROR MESSAGE
I have checked and adjusted my infoset in SQ02 and they seems fine but still obtain the same error.
In BW, replicated the datasource and activate the transfer rules but still obtain the same error.
Anyone knows how to get more details for this type of error? Or how to fix this problem?
Regards
Wayne

I think I have just solved it.
Transaction RS02 delete and recreate after checking the structure in BW and Source system are the same.
Cheers

BW: Data Packages Selected number does not agree with transferred

Hi,
I am running into an issue with an existing master data text load process chain in Production. The extractor is from ERP and there are only 159 records. What is happening is the chain is stuck on yellow but there is an issue with the data packages. The status error message is 'Missing data packages for PSA table'. Clicking into the Details tab the message then states Data Package 1: arrived in BW; Processing: Selected number does not agree with transferred.
The version is BI 7.0. I have done the following steps and still no luck. Looking for any suggestions. Thanks.
ERP
    SM37 (Job always finishes)
    SM58 (No IDOCS stuck)
    ST22 (No short dumps)
BW
    SM58 (No IDOCS stuck)
    SM37 (Job always finishes)
    ST22 (No short dumps)
Reactivated Datasource: RSDS_DATASOURCE_ACTIVATE_ALL
Reactivated Transformation: RSDG_TRFN_ACTIVATE

Hi
Just check whether source system connection is ok in RSA1.
if it is fine then have a loo at the below thread(last post)
Data Load from R/3 to BW-'Selected number does not agree with transferred'
Regards,
Venkatesh

I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd so I need new software. Any ideas?

Hi. I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd (I'm very disappointed about that.) The photos are stored in my iphoto and I can burn a dvd using idvd but there is no audio So.... I need new software. I have a Mac OS X 10.5.8 and my digital still camera is the Canon Cybershot These are home movies of my kids and the viedeos are precious. Thanks in advance!

Canon Cybershot
I can't trace a camera of that name. All that comes up is either the Sony Cybershot or the Canon Powershot!
Please confirm excactly what camera you have, and what version of iMovie.

Integral iSight not compatible with iMovie

Just found this article in the Apple Knowledge Base. It says that the integral iSight in the new iMac G5 will not work with iMovie. So much for having a $150 iSight camera built into your iMac as it is an iSight in name only, not functionality.
http://docs.info.apple.com/article.html?artnum=302749

You can capture from the built-in iSight under the following conditions:
1. Plug-in a separate FW deck/cam, and power it up such that it's output is recognized and displayed in iMovie.
2. Power-off the deck/cam, or just unplug it.
Very shortly thereafter, iMovie should display the output from the built-in iSight, and iSight's green activity light should come on.
I found this out just today - quite by chance. Be a little careful, it's a temporary session. As soon as you go to your clips or timeline, the built-in iSight link is gone, until you repeat steps 1 and 2 above again.

Does Mavericks not come with iMovie?

I had to get my macbook pro fixed and while they were fixing it they updated to mavericks, now I don't have iMovie? Am I just clueless? What happened to iPhoto too? Do I have to pay for iMovie and download it?

Mavericks does NOT come with iMovie, Garageband, iPhoto. Never was part of the OS …
… but every Mac comes pre-installed with these apps.
When you do a socalled 'clean-install' of an OS, you erase all content from disk - which makes it neccessary to re-install apps (and all personal data, music, photos, documents, movies).
Looks like, they did that way.
Did they back-up your drive before doing so? Did you back-up before giving your Mac away?
Depending on date of purchase, your Mac came with installer-disks, which allow an 'apps only' custom install; or, you were instructed on first launch to 'register' at Apple/AppStore - then, log-in there, downlaod and install apps.

IPhoto not working with iMovie or Garageband

Ever since I upgraded to iMovie 09 (from 08), my iPhotos will NOT load to iMovie. Or Garageband or even upload to email for that matter.
What happens is that my iphotos say "loading photos" or something like that, and it just has a little spinner there and NEVER loads the photos for use with iMOvie. During Garageband, it shuts down my computer every single time.
I went to the Mac store and they couldn't figure it out either.
Can someone help me?
OR.....I have my original CD that came with my computer. If I put that in, will my original iLife 08 reload? I'm nervous to try it, but I'm desperate. It's been 6 months without the use of my iAnything.

Sal, I had a similar problem once. I'm sorry you had to go through so much of this but maybe what I discovered can still help you.
- View your albumdata.xml file in some text editor, like TextEdit.
- Do a Find (cmd f) for "List of Keywords"
- The XML under that looks kind of like this:
<dict>
<key>1</key>
<string>Favorite</string>
<key>6</key>
<string>Birthday</string>
<key>3</key>
</dict>
You will probably have more keywords, this is just an example. But see the format - everything that has <something> ends with </something>.
When I had the problem, the example above looked like:
<dict>
<key>1</key>
<string>Favorite <key>6</key>
<string>Birthday</string>
<key>3</key>
</dict>
Notice the line return and </string> are missing for "Favorite". This happened to one of my keywords, and I don't know what caused it, but I deleted that keyword (and the one after it) from within iPhoto's preferences, and typed them in again.
The problem went away. Maybe some bogus character got into the keywords to make the XML go bad.
So try to use the method above to identify which keyword might have a problem, rather than go on a witch hunt and waste a lot of time. Of course, your problem could be different from mine entirely, but my iLife apps had the same problem you described.

Certain Movies not compatible with iMovie.

I've tried everything with iMovie, and there's nothing wrong with that-in fact, it seems to be a problem with certain movies. And there doesn't seem to be any pattern.
I can use a movie that I've taken from the beginning of a roll, and not use one near the end, however, all of my movies in my iPhoto library can be seen in quicktime.
I can import some movies into iMovie, just not all of them.
I'm rebuilding my thumbnail cache right now. Doesn't seem to be working.

MilaUno:
Maybe you should post your question in the iMovie forum where you're more likely to get a potential solution.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Added new backup drive getting:"This volume is not compatible with iMovie"

Anyone know why this error occurs? I just added a new backup drive and it gives me that error message. I can save iMovie clips to my other backup drive...but not the new one. Any clues?
Thanks!

An easy way to see how it's formatted is to hold down the Ctrl key and click on the disc's icon on your Desktop, then choose "Get Info..." ..that'll tell you how it's formatted.
If it's a large disc ..say, more than 250GB.. and it's been formatted for a PC (..it may show 'PC Exchange' as the type of format when you use 'Get Info'..) then it may need to be partitioned before it can be formatted ..which may be why you get the message "File system formatter failed".
First of all, take off the drive whatever you want to keep, as formatting will erase everything that's already on it!
If it is larger than 250GB, and was formatted as 'PC Exchange' (..which will be one of the Windows/DOS file formats, such as FAT32..) then in Disk Utility, select that external disc, and choose the 'Partition' tab, then under 'Volume Scheme' click the little arrowheads and choose "1 Partition". Choose the 'Format:' as Mac OS Extended (..you can choose either Journaled or not..), give the drive a Name: and then click on 'Apply' at bottom-right.
That should correctly set it up to be used with iMovie.
P.S: Yup; from your screenshot it's a big drive ..it'll need to be partitioned before you can format it!
P.P.S: I forgot to credit Kappy, over in Mac OS X Discussions, who explained this to me some time ago when I couldn't format a large (..1 terabyte..) hard disc.

DXG 565V not agreeing with iMovie...

Similar Messages

Maybe you are looking for