Dye or pigment based black and colors HP 88 for k5400

I would like to know if black and colors is dye or pigmented.
In advance thank you for your help.
This question was solved.
View Solution.

Found the answer at: http://www.inkowl.com/index.php?C=10&S=17&B=8&product=1363&p=product
pigment-based black ink for HP 18/88
dye-based cyan ink for HP 18/88
dye-based magenta ink for HP 18/88
dye-based yellow ink for HP 18/88

Similar Messages

  • Dye or Pigment based

    How do I know whether my cartridges are dye or pigment based? I am using HP58 (C6658A) and HP57plus(CB278A)
    Thanks,

    Ciara_B wrote:
    Hi, the HP58 is a photo cartridge and it is dye based, see more details  here
    Bob, maybe you were thinking of the HP56 mono cartridge, which is pigment based.
     Oops, yes Ciara is correct.  I was thinking of the 56 black cartridge.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion? The MFP can be either 3-in-1  or 4-in-1 i.e with fax

    can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion?
    The MFP can be either 3-in-1  or 4-in-1 i.e with fax

    I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
    Hope this helps.

  • The screen on my iphone 4 went black and began to vibrate for half hour before it died completely. Anybody know if this can be fixed?

    The screen on my iphone 4 went black and began to vibrate for half hour before it died completely. Anybody know if this can be fixed?

    Ok? Why not? It is an original iphone 4 that I bought in a store .....No jailbreak.... I have had it for almost 2 years without problems and was on the facebook app when it happened .. I have over 1200 pictures that I want to keep .... 6 months since the lastsynchronization, unfortunately

  • Dye vs pigment based inks

    Have an HP C7180 all-in-one.  Which of the six inks are dye based (black, light and dark magenta, yellow, light and dark cyan)?  I want to print some labels on fabric and need to know if the inks are dye or pigment (if pigment, I need to pre-treat the fabric).  Thx!

    Hi,The HP 363 / 02 / 177 / 801 ink cratridges are Dye-based as you may find listed on the following link as an example:http://store.hp.com/SwitzerlandStore/Merch/Product.aspx?id=C8721EE&opt=&sel=SUP&lang=en-CH Be aware the the printer is not intended for a fabric, I suggest being carefull with a such to avoid any damage to the printer.. You may find any supported media type listed below:http://h20195.www2.hp.com/V2/GetPDF.aspx%2F4AA0-4466EEE.pdf Regards,Shlomi

  • Color in fcp7 changes to crushed blacks and warm skin tones for some reason

    So I have a MBP Retina, 2.6 GHZ, 16GB memory, 512 SSD.  I have two external displays LG IPS LED ones connected via hdmi.  For some strange reason, when I perform a given function or just randomly the color of my video becomes highly contrasted, and warm.  When I first begin my project everything looks great, but say for example I go to Window>Arrange>Standard, the windows will orgainze themsleves as usual, but then the color will become drastically crushed (see before and after photos below) The image becomes heavily contrasted as well as very warm in the red spectrum.  When I disconnect the monitor to see if it is an issue of the external display and just view FCP on my laptop, the images remain the same, crushed blacks and warm/redish skin tones.  But everything looks fine, if I close the program, disconnect the external displays and then recconnect them again and open FCP 7 again.  It will NOT do this if I stay on my laptop only, seems to only do it when I have either one or two external displays attached. 
    Not sure if anyone has come accross this yet, any clues? The first photo is how it normally looks, the second is with the strange color annomily.

    In FCP, go to the menu Final Cut Pro > System Settings and click on the Playback Control Tab.
    Make sure the Gamma Correction is set to Approximate:
    MtD

  • N95 Display Problem. URGENT (Black and colorful mo...

    Hey everyone,
    I have been having a problem with the display of my N95. The Display goes BLACK and i cant see anything on the screen. Then when i hit the back or side of the phone, the display appears but turn Red/orange/blue at times and also moves all over the place.. I have seen the screen go from right to left..
    I would like to mention that everything works fine with the phone EXCEPT the display... I can see the keypad lights and it also makes the key sound when i press the keys..
    Anyone..? It's Urgent..

    It's definitely a hardware problem with your phone. You need to take it to a nokia care point for repair. It will be free if your phone is under warranty and undamaged. If you are out of warranty you will have to pay. Only the care point can tell you the cost.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Printing in black and white only - looking for a definitive solution

    Hi
    I've been trying to find out once and for all how to make sure my black and white text documents are printing only from the large pigment-based cartridge (525 PGBK), rather than using the smaller black dye-based cartridge (526BK), or from a combination of the dye-based colour cartridges. I've trawled through endless forums, and finally in frustration I recently called Canon's Australian phone support team.
    I thought I'd nailed it. The phone support person told me that if the document I'm printing is definitely black only, then all I need to do is print normally, with grayscale DE-selected. He said nothing about also de-selecting duplex. But I've since read online advice that contradicts this in relation to other models (I haven't found any advice based specifically on the MG6150, apart from the phone guy from Canon). Some say you need to SELECT grayscale and DE-select duplex; others say to DE-select both grayscale and duplex; others say to select grayscale, DE-select duplex, and also select dither (on my screen that's under Main > Print Quality > Custom). I'm now wondering whether I've nailed it after all.
    If anyone from Canon is reading this, can you please give a definitive answer to these questions:
    1. How do I ensure that my black and white text documents print only from the large pigment cartridge?
    2. Can I print in automatic duplex using this method, or do I have to do manual duplex?
    2. Will this also work for purely black and white NON-text documents as well (e.g., photos that have been converted from colour to B&W)?
    3. If not, is there another way of forcing B&W NON-text documents to print from the pigment cartridge? What about a way of forcing colour documents to print from the pigment cartridge?
    4. If my smaller black dye cartridge (526BK) isn't being used up at the same rate as the other dye cartridges, is there a way of forcing the printer to use this instead of the pigment cartridge for B&W text documents, but NOT to mix in any of the colour cartridges at the same time?
    5. Does this procedure work for all other Canon printer models in addition to the MG6150, or just a limited range?
    Many thanks for your patience in reading this -- I'm really trying to get the best out of my printer rather than give up and buy a different brand, and I'm sure others would appreciate a definitive answer to these questions as well.

    I have at MG8100 and it seems that there is no solution to this. I have scoured the web for one and it seems that there is no way to print in black and white only. The grayscale option uses all the colours including black to print.
    I have gone through a ton of colour ink just printing black and white documents. Its cost me a fortune and I've worked out that I can get it done cheaper by going to the print shop.
    As far as I am concerned this unbelievable. A printer that doesn't give you the option to print using black ink only! And its not advertised or made known in any way. You have to buy the product and then find out later that it does not have a black and white print option. It seems there are a lot of people out there that are unhappy about this, and the "problem" seems to go quite far back. Why haven't Canon responded by adding this feature?! I wont say it here, but I think it must be obvious. Brings to mind the story of housecleaning product manufacturers that increase the size of the closures so that consumers will use more of the product, which is actually wasteful, so as to increase the purchase cycle.
    This leaves a really bad taste in my mouth. I'm flogging mine now, and I am done with Canon for good!

  • Hp psc 950 printer only prints black and white, no driver for Canon lpb 5000

    Hi everyone,
    I am trying to install my two printers on mac book pro.
    Problem 1.
    My HP psc 950 printer is only printing in a bad black and white quality - no color at all?? - any idea where I can download a printerdriver that is actually up to date? The one mac book has preinstalled seems not to be the right one?
    Problem 2.
    My may can´t find a driver for my other printer Canon LPB 5000 at all. I´ve already downloaded the canon drivers for Mac book  - so I see a long list of Canon drivers but the LPB 5000 is not there and I don´t find any download of it in the web. I work with os x 10.7 and there is just an old mac driver for 10.6 to be found on the Canon website. I downloaded it but still does not work.
    Hope someone can help. Both printers used to work fine on Windows but I am changing to Mac now and need to get them work.
    Thanks,
    K.

    Canon LPB5000 driver for 10.7 is at http://support-au.canon.com.au/P/search?model=LASER+SHOT+LBP5000&menu=download&f ilter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E7
    There is also this note: When using with OS X Lion, install this printer driver, and then register the printer. For information on how to register ... support-au.canon.com.au/contents/AU/EN/0100359005.html

  • Black and White monitor adaptor for connection to a G3 Blue and White?

    Hi, I have a Blue and White G3 Power mac and I also have a black and white G4 with a matching flat screen. Is there an adaptor available which allows me to connect my blue and white G3 to my black and white screen?

    If I make every assumption possible, I think you may be asking if you can use a white-with-gray Apple 17" flat panel display, which has only a digital video connector, in a stock Blue & White G3.
    There are two issues:
    1) The connector on the stock card does not mate with the connector on the display, and there is no cheap fix available.
    2) the display gets its power off the connector, and the Blue & White does not have a way or providing that power.
    Both can be solved together by using the Dr. Bott VGA-tor. But at US$300, it would be cheaper to buy a new display.
    http://www.drbott.com/prod/db.lasso?code=0151-VGAT
    The second approach requires two steps. First, upgrade your Video card to one that provides the Apple DVI connector. The use the Dr. Bott DVI-ator (US$95) to supply the external power:
    http://www.drbott.com/prod/db.lasso?code=0111-DVAD

  • Is my ink dye or pigment based? My printer is an HP 1050A and uses 301 cartridges. Thanks

    A

    For the Deskjet 1050a printer the black ink is pigmented, the color inks are dye based.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Why is photo black and color draining when using black only?

    I am printing in fast draft, black only, why is my photo black being used?
    Am I wrong thinking photo black is just for the photo tray?
    Also my colors seem to be used as well.

    Hi,
    Color inks will drain slowly even we use black only because from time to time the printer needs to clean the print head(s) specially during warming up process.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My mac went black and now its asking for a guest password?

    hello, I was trying to save all my information in my mac laptop and asked for a password I did type my admin password then laptop froze and went black! now its asking me for a guest password, I dont remember to have one! I tried all the passwords that I have/had and I doesnt take them! I cant pass from the start screen
    If someone can help me!
    thank you

    That's not a password, it's your Apple ID. The same one you use to log onto this site or the App Store.

  • Have just tried to replace TESCO colour and black and white ink cartridges for a model 2540.

    Each time I get the same error message 'incompatable older generation  ink cartridge'.  Contacted TESCO help desk and they sent a pair of cartridges direct to me.......the latest ones they have in stock............................same error message............does this mean that in future NO Tesco ink cartridge will ever be able to be used on a 2540 printer, or is this a way of getting me to buy HP cartridges at twice the cost? 

    Hi AlanAtkinson,
    Welcome to the HP Forums.
    I see that you are getting an error that deals with the ink cartridges.
    Please click on the following link that deals with An 'Older Cartridge' Message Displays on the Control Panel or the Computer.
    I have also located a document that deals with A 'Used or Counterfeit Cartridge Detected' or 'Counterfeit Cartridge Advisory' Message Displays on t....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Black and white laser printer for Imac running 8.6 os

    Does anyone know of a laser printer for my older Imac running 8.6 os?

    jackson hole 88,
    The 300-320-360 series was nice and 10 ppm but no ethernet. Jump right to the 600 series, including the 16/600 or the 640. Find a recycler that refurbishes them. You can get printers there for as low as $25. Buy two and have spare parts. Toner is still available for that series at affordable prices.
    Jim

Maybe you are looking for