Dynabook: How to enter the BIOS settings?

I have a Dynabook V2/470 CRC. How can I enter the BIOS
settings on this laptop?

Hello
This unit is not known to me but I assume that you can enter BIOS setting pressing F2 button or maybe ESC in combination with F1.
Bye

Similar Messages

How to enter the BIOS settings on my Satellite L50-A-k4W?

Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

At first you have to perform an complete shutdown.
Here an HowTo:
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

Sat 4070cdt: How to enter the BIOS?

Hi i have a satellite 4070cdt, am I able to enter the bios, if so how please

Hello Steve
As far I know it should be possible to enter the BIOS by pressing the ESC and then F1 button.
Bye

Tecra 8000 doesn't boot from CD - how to enter the BIOS?

Hello,
i have a 2nd hand tecra 8000.
Now it dont boot from CD? i dont know why... but he question is how to enter on BIOS setup, because is not possible with F2 key.
How to enter on BIOS?
Thanks too much
Francisco
([email protected])

Hi
Please check this Toshiba FAQ document:
How to access to the BIOS Setup - instructions for most models
http://support.toshiba-tro.de/kb0/FAQ6401G1000DR01.htm

How to enter the BIOS in Satellite C50-A006

Hi!
I wanted to enter BIOS to select boot sequence in Satellite C50-A006 running with Win8, but I was unsuccessful. I tried pressing F2, F8, F12, ESC and DEL but no luck. Also tried googling, also no luck.
Please help.
Thank you!

Hi
At first you must perform complete shutdown. After doing this you can start machine and enter BIOS settings.
How to perform complete shutdown you can read on - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
Try it please.

Toshiba P875 S7102 How To Enter The Bios Setup

I have been tring everything to get to the bios screen of the computer. I have tried holding Esc, F1, F2, F10, F12, Delete, but that has not worked. I have found a toshiba manual that said to hold F2 until you see the toshiba logo then release it. Nothing has worked, it just continues to boot to windows 8.
I have searched and searched, this forum and the web, but I have not found anything that has worked to get into the BIOS setup screen.
What is the proper key stroke to get into the bios screen for P875 S7102 laptop?
Thanks.

The "secret" is what you do when shutting down before attempting to access the BIOS. Press the shift key as you click Shutdown. Then on startup, tap F2 to take you to the BIOS screen.
This applies to Toshiba laptops that came PRE-INSTALLED with Windows 8. It does NOT apply to Windows 7 machines or those that were UPGRADED from Windows 7 to Windows 8.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

How do I access BIOS settings to enable visualization on my desktop

I would appreciate any help / advice on how to change the BIOS settings on my Desktop.Installed an Android Emulator but when I tried to run it I had an on screen message telling me I needed to enable Visualization VX in my BIOS Settings but despite numerous attemps I have been unable to locate the BIOS settings screen following re-boot (tried Esc., F1, F2, F8, F10).The SystemBIOS version is 786E1 V02.10The computer has an Intel Core 2 CPU 6400 @ 2.13GHz and Intel Q965/Q963 Express chipset family fittedMany Thanks,Johna888

https://support.mozilla.com/en-US/kb/Creating+a+desktop+shortcut+to+a+web+page

How do I find the BIOS settings? I'm trying to install a VM so I can run CAD programs for my work.

I am an engineering student and thus having the capability to utilize CAD programs is highly advantageous to me, so I talked to several of my friends who have Macbooks and they recommended using Parallel. After I installed the program and my Windows OS, it keeps giving me an error message saying that the hardware virtualization has been disabled in the BIOS settings. I cannot find the BIOS settings anywhere! How do I change this? Does anyone know?

There are no BIOS settings, because Macs don't have a BIOS. I don't use Parallels, but I assume it has simulated BIOS settings. You'd have to consult its documentation to find out how to change them.

How do I open the bios settings for a MSI760GMP34FX mainboard?

I know this is a stupid question but I have never had to do this before in my life and I tried googling it and I couldn't find anything helpful.
I think something may be wrong with the bios settings on my computer so I need to know how to open them up to check and change them but I have no idea how to do it and can't find any instructions. I think it's different for different types of mainboards from what I can tell but I am not sure.
My OS is Windows 7 Pro 64 bit if that makes any difference and my board is a MSI760GMP34FX mainboard.
Sorry if this is a stupid question but I have no idea how to do this.
Thank you for your time.

Well thanks again. Hitting delete once on start up worked like a charm and now my Bluray burner drive is working good as new. I thought it had broken down and I would have to buy a new one but going into the Bios did the trick.
You saved me $70, thanks a bunch.

How to enter a BIOS/UEFI password in T420?

Hello, I don't need to remove the UEFI supervisor password, I know what it is. The problem is that I can't get it to prompt me for that password! Pressing Thinkvantage button + F1 just prompts for the power-on password, and I'm never asked to enter the supervisor password so that I can enable the VT & VT-d settings. This is really critical, I can't run VirtualBox without it.
Can anyone explain how to enter it? Am I getting to the BIOS settings the wrong way?
Solved!
Go to Solution.

Power off, start it up, enter Supervisor password at Power On password prompt.
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

How do I access BIOS Settings

How do I Access the BIOS settings on this computer?
This question was solved.
View Solution.

Hi,
Start tapping the ESC key after powering on the PC.
Another option is to enter: Change advanced startup options on the Start screen.
Alternatively review this other method.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How to enter the database in oracle 11g!!

Hi all,
I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
Thanks & Regards
keerthi kumar

SET
sqlplus
/ as sysdba
startup
exit
THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\KEERTHI KUMAR>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=KEERTHIKUMAR
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFAULT_CA_NR=CA18
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\KEERTHI KUMAR
LOGONSERVER=\\KEERTHIKUMAR
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
ram Files\Smart Projects\IsoBuster;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=2c02
ProgramFiles=C:\Program Files
PROMPT=$P$G
P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
USERDOMAIN=KEERTHIKUMAR
USERNAME=KEERTHI KUMAR
USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
windir=C:\WINDOWS
C:\Documents and Settings\KEERTHI KUMAR>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name: startup
Enter password:

How to access the BIOS setting for H330 to verify VT setting?

How to access the BIOS setting for H330 to verify VT setting?

Hello Rho2019 and welcome to community,
To enter into BIOS, Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Re: Portege - Which key I need to enter the BIOS?

Which key do I use enter the BIOS? F12 is to choose which boot drive but I can't get into BIOS settings.
Thanks

Hi
It would be very useful if you also post what notebook model you have ;)
Anyway, if you can go into boot menu pressing F12 you should be able to access BIOS if you press *F2*.
Check this!

Z87-G43, can't enter the BIOS Setup, system is not running

Hi everyone,
I was working with my pc for about 2 months. Since the very first day i had few problems with mobo but now i can't even run the system and enter the bios. First of all, i had problem with running the system after disabled the MSI logo. I had to enebled it again, because it was the only way to turn on PC (bios stopped at the screen with black screen and a2 code) but it was about 1 month ago. I also remember that from the very beginning option "Hardware Monitor" wasn't working, i mean bios was freezing too and i had to restart PC. Furthermore i have noticed that after choosing language to Polish, few more options in "Settings" appeared, but after switching language back to english they were gone. Unfortunately i can't say now, which one it was because now i got the biggest problem...
BIOS is not running at all. I mean, it all stops with A2 code in right bottom corner of the screen. I can't even enter the bios setup. It shows "Setup is preparing to start" or something like that, but it doesn't run... Can't do nothing atm. BIOS version was the latest - 1.6 . It all started to happening when i had entered to option in bios with disabling or enabling MSI logo, i didn't choose nothing, it freezed, i have resterted PC, and now i nothing is running... Btw sometimes, i coudn't run the system and bios was freezeing also, if my TL-WN722N wasn't connected to USB port in front case's panel. But now, whenever Tp-LINK is connected or not, it's not running...
CPU: i5 4440
GPU: R9 270x
SSD: Plextor 2,5' 128GB, SATA III ( 520/200MB/s ), 9,5mm (PX-128M5S)
Power Supply: XFX Pro Series 550W PSU 120mm 80+ (P1-550S-XXB9)
RAM: Kingston HyperX 2x4GB 1600MHz DDR3 Non-ECC CL9 Intel XMP X2 Grey Series (KHX1600C9D3X2K2/8GX)

Quote from: badboy2k on 04-January-14, 18:37:20
A2 is IDE detect <--- that is a HDD/SSD problem or its cable (try a different one)
if the above doesn't work try to foll0w >>Clear CMOS Guide<< do that to reset the BIOS to defaults with power cord removed from your PSU!
after performing the above steps make sure you enter BIOS and reset the SATA mode (AHCI/IDE/RAID to what you installed your os at) and boot order to your SSD first!
Ye that's the reason, I have a new brand 1tb sata 3 where I installed the windows, but the old 320gb sata 2 is causing the same error, so I have to remove the cables from the sata 2 hdd, than the pc boots ok. I shutdown & reatach the old drive & evrething works untill the PC enters stand by again.

Dynabook: How to enter the BIOS settings?

Similar Messages

Maybe you are looking for