Dynadock can only display 1280x1024 at 60 Hertz refresh rate

Hello.
I just installed my dynadock (VGA).
I run Vista Home Premium.
I have set up three displays:
1) the laptop;
2) VGA monitor connected to laptop;
3) VGA monitor connected to dynadock.
I downloaded the latest dynadock drivers from Toshiba's website and installed.
Everything is working extending my desktop to the two additional monitors ...
... except that when I set the Dynadock's display to 1280x1024 at true color (32 bit), the best refresh rate it'll allow me is 60 hz!
The laptop is Toshiba Satellite P205D-S6454.
The two monitors are both 19" 109P40's
The display is going through a Starview SV221DD KVM switch.
I have also downloaded and tried the latest drivers from Displaylink (who it seems makes the display adapter in the Dynadock, and has some newer drivers than what's included in the latest Dynadock drivers) with the same results.
Is this normal, or should it be able to give me better than 60 hz at 1280x1024x32bpp?
Thanks
Sean

Hi there,
I checked the specs on this website and it seems that the dynadock is only able to display 1280x1024 32Bit 60Hz max.
Heres the link:
http://www.toshibadirect.com/td/b2c/content.to?page=dynadock
Cheers

Similar Messages

I hit the wrong monitor refresh rate and now lost monitor picture. How can I get back to the right refresh rate with no pic to view?

I hit the wrong monitor refresh rate and now lost monitor picture. How can I get back to the right refresh rate with no pic to view?

Try this:
Mac OS X 10.6 Help: If you changed your display’s resolution and now it doesn’t display a picture

Can only display Chineses characters on OSX, not Windows Vista ?

I have a OSX 10.5 and a Windows Vista machine, both are configured to use English/United Kingdom as Language/Locale. in a java app on OSX I can view chinese characters ok, but on Windows I cant they are just displayed as a square - why are they being treated differently
thanks paul

Thanks, that did work - I used this.setFont(Font.decode("arial unicode 11"));
But on further investigation I found that the problem only occurred with the default Tahoma font when using JGoodies Windows Look and Feel, using the standard Windows or metal LAF it was fine. If I changed the font it worked with JGoodies as well.
here is a program to illustrate problem
import javax.swing.*;
import java.awt.*;
public class UnicodeTest
    public void start() throws Exception
       UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
       UIManager.setLookAndFeel("com.jgoodies.looks.windows.WindowsLookAndFeel");
        JTextField txtField = new JTextField();
        txtField.setText("\u01ff\u5742\u672c");
        JTextField txt2Field = new JTextField();
        txt2Field.setText("\u01ff\u5742\u672c");
        txt2Field.setFont(Font.decode("arial unicode 11"));
        System.out.println("Font Field 1 is:"+txtField.getFont());
        System.out.println("Font Field 2 is:"+txt2Field.getFont());
        JFrame frame = new JFrame("UnicodeTest");
        frame.setLayout(new FlowLayout());
        frame.add(txtField);
        frame.add(txt2Field);
        frame.pack();
        frame.setVisible(true);
     public static void main(String args[]) throws Exception
        UnicodeTest test = new UnicodeTest();
        test.start();
}

My iPhone can only display and play purchased songs after updating to 8.1.3

After updating to 8.1.3, all of my songs refuse to even show up on my iPhone if they were not purchased on the iTunes store. I should have about 5 gbs of music on my phone but I only see 7 songs I purchased from albums in the iTunes store. I tried synching to iTunes, re-adding music, restoring it. This was not a problem until I updated the iOS. How do I get this fixed?

did u ever find an answer?

How can I display selected tags across multiple e-mail addresses?

I receive email on a specific topic but via several e-mail addresses. How can I view selected tags where the resulting e-mails span several (7) email addresses. They are all active on my Thunderbird, but as far as I know, I can only display the selected tag on one of them at a time.
Any assistance greatly appreciated as this is a very big problem for me.
thanks, Ron75

This solution does not appear to work across multiple e-mail addresses.
Perhaps I should have said "work across multiple e-mail address at the same time. I get e-mail on specific topics via several email addresses and wish to view all the tagged emails regardless of which email account in which they reside.
I could not get this solution to select more than one email account at a time.

Exception color can not display at another key figure in BEx query desinger

I have a report requirement, the user want to display the average price on each month ,such as:
Jan.   Feb. Mar. Apr. etc.
100    105    104   95   ....
and the user want to compare each other months with Jan's price.
they want to display the exception color when the rise or down rate greater or less than 5%.
Now ,I can only change the output structure such as:
Jan. Feb. Rate2-1                 Mar. Rate3-1                 etc.
100   105   (105-100)/100=5% 104    (104-100)/100=4% ....
Now I can set Exception on the formula Rate2-1 Rate3-1....
But the Exception color can only display on Rate2-1,Rate3-1...
and Not the Keyfigure Feb. Mar...
I am using the BI 7.0 and the new Query Designer.
Who can help me to solve this question .
Thanks.
Yours Youming.Zhao

Hi,
its simply not supported for BEx Analyzer. Exception reporting on another key figure is only possible for Web Reporting.
Check this actual SAP Help Link:
[Restrictions in the BEx Analyzer|http://help.sap.com/saphelp_nw70/helpdata/en/45/5038f28cce08d2e10000000a11466f/content.htm]
Sorry that i dont have a better answer
Cheers

Cisco ip communicator 2.1 can't display idle url?

dear sir,
You got any idea with the subject mentioned? It can only display the idle url for only 1 laptop with the same version of ip communicator but not the rest?
thanks.

dear sir,
You got any idea with the subject mentioned? It can only display the idle url for only 1 laptop with the same version of ip communicator but not the rest?
thanks.

Can OmniPortlet display more than 5 fields?

My OmniPortlet can only display 5 fields. Do I need to develop my own portlet if I want to display more fields?The ias10g I am using was downloaded from oracle.com. Is it because of the version of ias?

Yeah Omni Portlet Can display more than 5 Fields. Edit OmniPortlet's Provider.xml and add the following information. For adding the following information, search for "DataFieldDefinition" in provider.xml. Add the following statements as last one in DataFieldDefinitions. This statment will add the 6th field to OmniPortlet. if you want one more then add the same again, but do change the Field name to Field7.
Thanks,
Seshan K.
<dataField class="oracle.webdb.reformlet.definition.DataFieldDefinition">
<name>Field6</name>
<displayName>Column6</displayName>
<description>Field6</description>
<text>##column##</text>
<alignment>left</alignment>
<displayAs>hidden</displayAs>
<type>linebreak</type>
<font>Arial.3.Plain.None</font>
<color>#000000</color>
<style>none</style>
<styleType>custom</styleType>
</dataField>

Setting refresh rate manuall in display options?

hi all,
I have recently received a Dell 1908WFP monitor, which runs at a native resolution of 1440x900x75hz.
When i connect it to my macbook pro using the mini-display-port-to-VGA-connector, this resolution is detected fine.
When connecting with the DVI connector, the resolution 1440x900 is setup properly, but the vertical refresh rate is set to 60hz. In display preferences the option for 75hz is greyed out.
Is there a way to force the refresh rate to 75hz?
thanks,
lennard

Hmm, I think I'm missing something here but I just looked at GraphicsDevice.java and as far as I can see it doesn't check for refresh rates.
     * Returns the current display mode of this
     * <code>GraphicsDevice</code>.
     * @return the current display mode of this graphics device.
     * @see #setDisplayMode(DisplayMode)
     * @since 1.4
    public DisplayMode getDisplayMode() {
        GraphicsConfiguration gc = getDefaultConfiguration();
        Rectangle r = gc.getBounds();
        ColorModel cm = gc.getColorModel();
        return new DisplayMode(r.width, r.height, cm.getPixelSize(), 0);//REFRESH_RATE_UNKNOWN = 0; ??
     * Returns all display modes available for this
     * <code>GraphicsDevice</code>.
     * @return all of the display modes available for this graphics device.
     * @since 1.4
    public DisplayMode[] getDisplayModes() {
        return new DisplayMode[] { getDisplayMode() };
    }Or have I read this wrong?

New to Macs just purchased a 27-inch: 2.7GHz mac when I open e.g my company website or facebook it only displays centre of the screen How do I set it up show full screeen also the bar at the top is hard to read as so small can this be increased, ??

Hi I need some help please as above I have just purchased my first mac 27" and as much I love it as a newbie im having some teething troubles, when say Facebook or my company website is displayed it is only displayed in the centre of the screen I know I can zoom in and out but that doesnt look great and dont want to have to that on each page display, how do i fix this please.
Also the toolbar at the top of the page is so small and hard to read is there a way to increase and fix the size
Thanks for your help

For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

HT2486 My address book only displays e-mails. How can I sync it with my i-phone to display the address book the same way as my contacts in my i-phone?

Currently my address book only displays e-mail addresses. It uses the portion of the address in front of the @ as the name. How can I sync it with my i-phone 4S that has name/numbers and addresses of my contacts?

Hello there, Seta.
You are correct that this can be done with iCloud. The following Knowledge Base article provides some great instruction for syncing contacts:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
Particularly:
Contacts, Calendars, Bookmarks, and Notes
You can sync contacts, calendars, bookmarks, and notes with other applications on your computer. This allows you to keep all your information in sync across multiple computers and iOS devices. The settings for these items are all in the Info tab for your iOS device in iTunes. With your iOS device connected to the computer, select your iOS device. Then click the Info tab.
For details on syncing content on your iOS device with your computer, click the sections below.
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Contacts" in OS X v10.8, or "Sync Address Book Contacts" in OS X v10.7 and earlier.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, Windows 7, and Windows 8)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista, Windows 7, and Windows 8)
Address Book (Mac OS X v10.7 and earlier)
Contacts (Mac OS X v10.8)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can I display only the Data Logging pull down menu on my LV front panel?

Is it possible to hide all unused pull down menu on my front panel vi like File, Edit, View etc.. and only
display the pull down menu for the Data logging?!
best regards
Norick

Hey,
You can build your own runtime menu (Edit>runtime menu) and then e.g. only display the application items you want to.
Christian

How can I display only speaker notes on iPad?

I have an IT dept that takes care of getting the ppt slides on the screen. I just want to use my iPad for my notes. Being able to get the notes into my iPad from a ppt would be awesome.

Hey,
You can build your own runtime menu (Edit>runtime menu) and then e.g. only display the application items you want to.
Christian

How can I display all my e-mails. Only some of them show up now...thanks to an apple representative in the apple store

How can I display all my e-mails on all my Apple products? Only some of them show up now...thanks to an apple representative in the apple store. Also, he put my oldest emails in POP (???)

How can I display all my e-mails on all my Apple products? Only some of them show up now...thanks to an apple representative in the apple store. Also, he put my oldest emails in POP (???)

How can i display a portlet in the Edit view only ?

Dear All,
I'm developing a portal in which the end user can change the content of the portal page (personalize) using Edit smart link and i ask How can i display a portlet in the Edit view only ? not shown in the production view ?

Last time I heard with Oracle they said the only way is to look at the current URL. If it contais _mode=16 then we are in edit mode.
This is a function I use:
FUNCTION inEditMode return boolean is
bEdit boolean := false;
begin
if PORTAL.wwpro_api_parameters.get_value('_mode', 'qaz') = '16' then
bEdit := true;
end if;
return bEdit;
end inEditMode;
Kind regards
Tomas Albinsson
Stockholm, Sweden

Dynadock can only display 1280x1024 at 60 Hertz refresh rate

Similar Messages

Maybe you are looking for