DynaDock shuts off wireless network discoverability

As soon as I plug in the dynadock   on a Windows 8 Surfface,  all wireless networks disapear from the screeen, as soon as I unplug the dynadock they all show up again and you can then connect to them. If you connect to the wireless network before you plug in the dynadock the network will 99 percent of the time just show no wireless network connection, or if it stays connected it only stays connected for 45 sec to 1 minute
Anyone have any sugestions?
Thanks Jon 

Try updating the Dynadoc drivers
(Everyone was new at one point)
You wanna say thanks ?? click the white star on the right side >>>

Similar Messages

  • Group Policy to disable ability to turn off wireless networking in Windows 8.1 Update

    I am wanting to disable the ability to turn off wireless networking in our Windows 8.1 Update clients using Group Policy. We are a school that runs classroom management software enabling the teachers to view what the students have on their screens.
    Students just switch off their wireless to avoid detection. I have searched the Group Policy listings and can't find anything.
    Thanks.

    Hi  GeoffAUS,
    I can’t find a direct group policy to disable the users’ ability to turn off the wireless network in Windows 8.1.
    If we just disable the display of wireless connection, we will need to additionally disable the ability that disabling the driver in device manager.
    We could try the workaround to use UAC to control the wireless connection.
    Go to Computer Configuration->Windows Settings->Security Settings->Local Policy->Security Options, and set the option
    User Account Control: Behavior of the elevation prompt for standard users.
    Please make sure the computer automatically connect to Wireless.
    For more information, please refer to the following article.
    http://technet.microsoft.com/en-us/magazine/gg266419.aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Leopard shuts off my network each time I shut off, restart, or sleep?

    After installing Leopard each time I shut off, restart or sleep my computer (auto or manual) it shuts-off my Belkin N Network. I have to manually unplug the wireless modem and replug. I'm running a WPA password protected network. It of course affects other wireless connected computers as well but is defiantly caused by my MacBookPro. Any ideas?

    Just as a test, if you turn Airport off on your MBP does the same thing happen?
    Once it's off, then turning off your MBP should have no effect.
    It this is the case, then you may need to check for firmware updates for the modem.
    There have been other instances of this type of behavior with Leopard, especially with 10.5.2.
    Most were solved up a firmware update to the modem.

  • IPADs and IPhones dropping off wireless network

    I have a site with a number of iphones and ipads that are attaching to a Wireless network managed by a lan controller ( cisco 2504 )
    but they seem to drop off every 16 minutes .... and can then get back on a few minutes later.
    Any ideas appreciated.
    Thanks

    Right now I have it in the setting; "(OFF) Bridge mode". Do you know if the airport extreme if the internet bottle necks will crash?

  • IPhone kicks Macbook off wireless network?

    Alright, this is rather bizarre. I have D-Link DIR 625 wireless router, and I had no issues with Macbook (and other computers) connecting to it at all.
    I also connect my iPhone to the same wireless network. However, all of a sudden (the only change I know of is update to 10.5.7), if Macbook is connected to the wireless first, and I connect iPhone second, the Macbook looses the connection. If I restart the AirPort on the Macbook, then they both co-exist on the network with no issues. No other computer on the wireless network is affected.
    Does anyone know what could be going on here? This is reproducible each time. All I have to do is turn iPhone on (it auto connects to the preferred network) and Macbook is out .

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Telephone calls shut off wireless

    Hi,
    I have an Airport Express and I use it with my iBook G4. The wireless works fine until I get a phone call on my house phone. As soon as someone picks it up or makes a call, the wireless shuts off. It's incredibly annoying, considering I get constant phone calls. Is there any way I can stop this from happening?
    Thank you so much for your time.

    If per chance your house phone is a cordless 2.4 MHz model, you can try changing wireless channels on your AirPort Express Base Station (AX) until you can find one which will work. You can also check to see if your cordless phone has the option to change channels as well.

  • RE kicked everyone off wireless network

    I just added a WRE54G v. 3 yesterday and set up was tricky, but seemed to complete in the end. There are 2 wireless networks here and I put the RE on a network called ART BARN. When I checked the settings the RE had the same exact settings except a diff mac address. This should work right? Well now no one can get on either of our two wireless networks here. Both routers are the WRT54G.
    Any solutions?

    hi , first thing i would check here is to see if i have the latest firmware on all devides...
    the WRT's have a newer and more stable firmware 1.01.0 ....i suggest you try this first.

  • Apple Devices Dropping Off Wireless Network

    Hello, I have recently deployed a wireless network using a WLC 2504 with 21 Light APs. All seems fine except that
    Apple Devices drop their connections every 15 minutes or so. A couple of minutes later they can reconnect but
    obviously something is wrong.
    Many Thanks

    Only Apple device exhibit this kind of behaviour?
    What kind of Apple devices?  Mac laptops?  iPad, iTouch, iPhone?
    Have you seen this behaviour from, say, non-Apple devices?  Android?  Windows laptops?
    What are the signal strengths when this happens?
    Do you have Aironet IE enabled?
    How far are the clients from the WAP(s)?

  • IPad getting kicked off wireless network

    i have a user that her IPad is constantly getting kicked off the wireless.  If it matters, her IPad is running OS5.
    I'm getting the following from my AP controller:
    the part in red is confusing me.
    Nov 08 18:05:45.586 apf_policy.c:542 APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SWITCH: Disconnecting mobile 10:93:e9:41:fd:a5 due to switch of WLANs from 3(KWCHGUEST) to 4(KWCHSmart)
    Nov 08 18:03:54.088 apf_80211.c:3942 APF-1-SEND_ASSOC_RESP_FAILED: Could not send a Client Association response to 10:93:e9:41:fd:a5.  Supected Auto-Immune attack Not sending Assoc Response.
    - Traceback:  0840a77e 0840ca52 08097d1c 08098013 0833b7d1 40183040 40262cfa
    Nov 08 18:03:54.088 apf_policy.c:542 APF-1-
    has anyone come across this and what can i do about it?
    Thanks, Gary

    If the iPad is bouncing between the networks, than that is likely an issue with the iPad wireless supplicant behavior. The error message in red above is likely due to the device switching with fast-ssid change disabled.
    So, if we are more concerned with why the device keeps moving between networks, we should capture a bit more data. Running a longer client debug should give us some additional data points.
    I've seen similar behavior with Apple devices when they "Remember" wifi networks -- sometimes you need to "Forget" other networks in the area to stop the device from associating to it automatically.
    Also, version of WLC code are you running?
    -Pat

  • IPads were kicked off wireless network

    We have 12 iPad2's that worked perfectly with the wifi on Friday, none will connect to the wifi on Monday?????  I have rebooted the school network, rebooted the iPads, uninstalled and reinstalled itunes on the laptop (yes the laptops connect to the wifi-before and after the reboot). any more ideas?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Is there a way to shut off 3g network and still have the WiFi working?

    My Dads going overseas and wants to use his Wifi but dosen't want to be charged using the 3G network.

    Because Airplane Mode turns off ALL iPhone radios...ALL. That way, there is no way to accidentally use cellular data. We get posts from users all the time that fail to use Airplane Mode & come home to bills from their carriers in the thousands. Do not rely on that data roaming switch.

  • Turning off Wireless on N8

    I got my N8 3days ago. For now I'm very pleased with it and it works really nice and smooth.
    Now, my problem is that I don't know how to turn off wireless network, and I mean turn it off completely.  I tried everything that crossed my mind by I just can't turn it of. I go to Connections and turn it of, but it starts by itself automatically few seconds later (and I am talking about my home wireless network as well as wireless network in my office). Problem with this is that it drains battery during the time when I actually don't need to use internet at all.
    So is there any way that wireless network can be stopped and then resumed when needed ?
    I would be really grateful if anyone can help me with that issue.
    If I've helped you in any way, a click on the White Star to the left would always be appreciated.
    Solved!
    Go to Solution.

    Symbian_fan wrote:
    Ok this is the issue. It is a bug in mail app. Mail apps just over rides the settings in your connections settings. The solution is Go to mail - settings - Your account - Synchronization - set fetch frequency for everyday. Then re start your phone. Some times your phone still connects to WiFi but this time when you turn it off in connections it will turn off forever. You may need to do it again and again some times because as i said it is a bug in mail app. ( I assume that the widgets are set to offline mode, and ovi sync settings is auto sync off they may also cause the connection) 
    It is simply a bug, if i turn off my WiFi in connections that should override all the individual app settings and gain the priority, but there are some apps like mail which gains the priority over the system settings. Hope it will be solved in the next firmware. 
    I have the same settings from the beggining and the wireless keeps connecting with a specific wireless access point, i have ten access points in my list and this happens only when im in the range of this access point.
    My settings are
    Mail App Synch: All Days unchecked, 20:00-20:05, None
    Widgets in offline mode
    No apps set in online mode
    WLAN scanning turned off
    The problem occured suddelny after adding that access point which is a common Thomson TG585v7 and it's hapening only with that acess point, it's very annoying because i have to change the security settings (like wpa key) to make it go in offline mode. I read in forums that others have also the same problem and the only solution is to move the AP, delete ot change settings.

  • Native function in iOS to save a pdf and access a pdf off the network?

    Hi,
    My camera didn't ship with a manual inside. I'd like to be able to download the pdf version of the manual from the camera website and save it to my iOS for future reference when i am possibly off wireless network. Any ideas how I can do that without downloading an app? Does the Apple iOS have any built-in functionality to accomplish this?  I have heard the Andriod OS has a built-in PDF viewer.
    Thanks for your help community!

    You can save the file in iBooks. This keeps it on the phone and you can view it in iBooks. That is a native iOS app.

  • E3000 questions. Cisco Connect with https and turn off wireless?

    My old router died this weekend after 10 years and I have been wanting to get a faster router for a while anyways.
    I picked up a E3000 and set it up yesterday.
    The firmware is 1.0.03
    I have two main questions
    I changed the router settings so you can only browser manage the router through https and turned off http access to the router.
    Cisco Connect now doesn't work. Will Cisco Connect work with HTTPS? Do I have to do something to get it to work?
    I also didn't see a version number on Cisco Connect am I just not noticing it?
    I'd really like to shut off wireless on most days when I'm not home. I want the router to still be working since my desktop computers are directly connected to the router and I remote into them. Is there an easy way to shutoff the wireless and then easily turn it back on when I get home?
    thanks
    mike

    Mine works the same. It's probably designed that way for the manual way of logging into the setup page of the router.
    No, it seems no updates yet or see the need to have one.
    No, it doesn't have that option unfortunately.
    "The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

  • Weird wireless networking showing up in my range

    I have two off wireless networks showing up in my range. They are: 1. Jet blue hot spot 2. Triple a network Does anyone have any idea what these are? They definitely look suspicious.

    It could be your neighbor's wifi. Use a more unique SSID for your wifi. And make sure that when you configure your router, connect it manually (wired) to your PC - do all the necessary settings then save.
    You'll never know, you could be changing someone else's wifi settings when you're doing it wirelessly.
    A unique SSID is a good way to start. Then change the default password of your router.

Maybe you are looking for

  • Sql Server 2012 Cluster IP Responses to MS Dynamics APP server broadcasts

    Hi All,  We are facing issues in our brand new MS Dynamics AX 2012 R3 installation with clustered MS SQL 2012. The DB server responses to the APP servers is like broadcasting to every system connected to the subnet. In our case that subnet is 192.168

  • How to provide the transport request number?

    Hi,      When im  trying in deactivate the Datasource "2LIS_03_BF" of Inventory Controlling, a screen prompts for a Customizing request number. Why this Pop up screen for Customizing request is displayed? What should i do in such cases? Is there any

  • Media required for homogeneous system copy

    My enviroment SAP ecc6 kernel 7.0/Oracle 10g/Solaris 10 I'm doing a system copy via backup/restore using Instalation Master DVD. When I run SAPinst . I've just restored sapdata files, redologs etc into the target system . But when I ran sapinst in th

  • Query on personnel number

    Dear Experts, I want the internal Personnel Number to be generated after the Personal Data information i.e IT0002. Is that feasible? Right now the number is generated after the action screen is executed then we fill the IT 0001, 0002. Thanks & Regard

  • Canon Powershot S50 hack to be supported by Aperture 2.

    Hello S50 users (and possibly others). I do have a Minolta SLR, and a old PowerShot S50 which happens to have a RAW mode, unlike new compacts by Canon. I also bought a waterproof case for it, so it's my only one which i want to risk it underwater. As