Dynadock U10 - USB mouse very slow in IE

Hello,
Our customer have a problem with the Dynadock port replicator.
The mouse hangs or is slow on Internet Explorer.
The dynadock is connected to a HP 4520S Laptop (Windows 7)
Tests that did not help:
- Virus/spyware test
- Windows updates / IE10
- New mouse connected to laptop directly, port replicator only connected for monitor and ethernet.
If we disconnect the dynadock the problem is solved..
Type: PA3575E-2PRP / serial: 7B101664H
Is there any driver or firmware update to solve this problem?

Hi
As far as I know the Dynadock does not use any kind of firmware.
In order to use the Dynadock, you have to install just one software and its from Displaylink.
The newest version can be found here:
http://www.displaylink.com/support/downloads.php
*Note:* The software must be installed before connecting the dynadock

Similar Messages

USB stick very slow

Hello,
I don't use my USB stick very often, so only today I've found that copying from/to USB is VERY slow (~10kb/s). I remember that some time ago the speed was fast enough. What is wrong, why USB is so slow now?

I recently had to reinstall my system due to a corrupted pacman database.
This is the first time I used my usb sticks and cardreader since the reinstall, and the speed is very slow. It now takes 1.5 hours to transfer 100Mbs of data to and from my usb sticks.
This wasn't the case before I reinstalled: It only took under a minute to transfer 100+Mbs of data.
My fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hda2 swap swap defaults 0 0
/dev/hda1 / jfs defaults 0 1
/dev/hda3 /home jfs defaults 0 1
pmount.allow:
# /etc/pmount.allow
# pmount will allow users to additionally mount all devices that are
# listed here.
/dev/sda
dmesg:
$ dmesg
Linux version 2.6.15-archck (root@sara) (gcc version 4.0.3 20051222 (prerelease)) #1 SMP PREEMPT Sun Mar 19 21:08:15 EST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003df40000 (usable)
BIOS-e820: 000000003df40000 - 000000003df50000 (ACPI data)
BIOS-e820: 000000003df50000 - 000000003e000000 (ACPI NVS)
BIOS-e820: 000000003e000000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
95MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 253760
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 24384 pages, LIFO batch:3
DMI 2.3 present.
ACPI: RSDP (v000 MSI ) @ 0x000f8400
ACPI: RSDT (v001 MSI 1013 0x10282005 MSFT 0x00000097) @ 0x3df40000
ACPI: FADT (v002 MSI 1013 0x10282005 MSFT 0x00000097) @ 0x3df40200
ACPI: MADT (v001 MSI OEMAPIC 0x10282005 MSFT 0x00000097) @ 0x3df40300
ACPI: WDRT (v001 MSI MSI_OEM 0x10282005 MSFT 0x00000097) @ 0x3df40360
ACPI: MCFG (v001 MSI OEMMCFG 0x10282005 MSFT 0x00000097) @ 0x3df403b0
ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x3df43700
ACPI: OEMB (v001 MSI MSI_OEM 0x10282005 MSFT 0x00000097) @ 0x3df50040
ACPI: DSDT (v001 MSI 1013 0x10282005 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 video=vesafb:ywrap,mtrr:3,1024x768-16@60 resume2=swap:/dev/hda2 ro disable_timer_pin_1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Using 3579 PM timer ticks per jiffy
Detected 1592.644 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1000248k/1015040k available (2065k kernel code, 14124k reserved, 748k data, 196k init, 97536k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3187.37 BogoMIPS (lpj=1593687)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 744k freed
ACPI: Looking for DSDT in initramfs... successfully read 11800 bytes from /DSDT.aml.
ACPI-0292: *** Info: Table [DSDT] replaced by host OS
CPU0: AMD Turion(tm) 64 Mobile Technology MT-30 stepping 02
Total of 1 processors activated (3187.37 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC] (gpe 6)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.POP2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Device 0000:02:03.0 not found by BIOS
PCI: Device 0000:02:04.0 not found by BIOS
PCI: Device 0000:02:04.1 not found by BIOS
PCI: Device 0000:02:04.2 not found by BIOS
PCI: Device 0000:02:09.0 not found by BIOS
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fbe00000-fbefffff
PREFETCH window: f4000000-faffffff
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0000e000-0000e0ff
IO window: 0000ec00-0000ecff
PREFETCH window: 50000000-51ffffff
MEM window: 56000000-57ffffff
PCI: Bus 7, cardbus bridge: 0000:02:04.1
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 52000000-53ffffff
MEM window: 58000000-59ffffff
PCI: Bridge: 0000:00:14.4
IO window: e000-efff
MEM window: fbf00000-fbffffff
PREFETCH window: 50000000-54ffffff
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:02:04.1[b] -> GSI 20 (level, low) -> IRQ 17
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
vesafb: ATI Technologies Inc., MS48, 01.00 (OEM: ATI MOBILITY RADEON Xpress 200G Series)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:52f9
vesafb: pmi: set display start = c00c5367, set palette = c00c53a1
vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=3072
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0xf4000000, mapped to 0xf8880000, using 6144k, total 32768k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (55 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI interrupt for device 0000:00:14.6 disabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
POP2 RTL USB1 USB2 EUSB AC97 MC97
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK6025GAS, ATA DISK drive
input: AT Translated Set 2 keyboard as /class/input/input0
logips2pp: Detected unknown logitech mouse model 99
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
logips2pp: Detected unknown logitech mouse model 99
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
hdc: Slimtype DVDRW SDW-431S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
JFS: nTxBlock = 7824, nTxLock = 62592
Suspend2 2.2: Swapwriter: Signature found.
Suspend2 2.2: Suspending enabled.
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 896 MBytes.
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 18
[fglrx] module loaded - fglrx 8.23.7 [Mar 6 2006] on minor 0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ndiswrapper version 1.10 loaded (preempt=yes,smp=yes)
ndiswrapper: driver neti2220 (LanExpress,03/29/2004,2.10.03.2004) loaded
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 22 (level, low) -> IRQ 20
ndiswrapper: using irq 20
wlan0: vendor: 'INPROCOMM IPN2220 Wireless LAN Adapter'
wlan0: ndiswrapper ethernet device 00:11:09:16:cd:97 using driver neti2220, 17FE:2220.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x14 (1050 mV)
cpu_init done, current fid 0x8, vid 0x8
powernow-k8: ph2 null fid transition 0x8
ACPI: PCI Interrupt 0000:00:14.6[b] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 16, io mem 0xfbdff000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbdfd000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 16, io mem 0xfbdfe000
usb 1-2: new high speed USB device using ehci_hcd and address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 1-2.3: new low speed USB device using ehci_hcd and address 3
Real Time Clock Driver v1.12
usbcore: registered new driver hiddev
input: USB Mouse as /class/input/input3
input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:13.2-2.3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 22
eth0: RealTek RTL8139 at 0xf8856c00, 00:0c:76:f9:35:a8, IRQ 22
eth0: Identified 8139 chip type 'RTL-8101'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Adding 2097136k swap on /dev/hda2. Priority:-1 extents:1 across:2097136k
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.6
wlan0: no IPv6 routers present
[fglrx] Maximum main memory to use for locked dma buffers: 896 MBytes.
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 19099648
[fglrx] max LFB = 19099648
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
[fglrx] Flat panel plugged in
drivers/usb/input/hid-core.c: input irq status -71 received
usb 1-3: new high speed USB device using ehci_hcd and address 4
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: Model: USB FLASH DRIVE Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 507904 512-byte hdwr sectors (260 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 507904 512-byte hdwr sectors (260 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
APIC error on CPU0: 00(40)
usb 1-3: USB disconnect, address 4
usb 1-3: new high speed USB device using ehci_hcd and address 5
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 1-3: USB disconnect, address 5
lsmod:
$ lsmod
Module Size Used by
nls_cp437 6272 0
vfat 9984 0
fat 40348 1 vfat
sd_mod 13696 0
usb_storage 62272 0
rfcomm 31124 0
hidp 12928 2
l2cap 20224 10 rfcomm,hidp
bluetooth 37860 5 rfcomm,hidp,l2cap
snd_seq_oss 27264 0
snd_seq_midi_event 6272 1 snd_seq_oss
snd_seq 43408 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 7052 2 snd_seq_oss,snd_seq
snd_pcm_oss 41760 0
snd_mixer_oss 15104 1 snd_pcm_oss
ide_cd 33284 0
cdrom 31520 1 ide_cd
8139cp 17024 0
8139too 22528 0
mii 4992 2 8139cp,8139too
joydev 8000 0
usbhid 40064 0
rtc 10164 0
shpchp 36832 0
pci_hotplug 22852 1 shpchp
ati_agp 7052 0
ohci_hcd 17028 0
ehci_hcd 27144 0
snd_atiixp 14988 3
snd_atiixp_modem 12296 0
snd_ac97_codec 80032 2 snd_atiixp,snd_atiixp_modem
snd_ac97_bus 2688 1 snd_ac97_codec
snd_pcm 69252 5 snd_pcm_oss,snd_atiixp,snd_atiixp_modem,snd_ac97_codec
snd_timer 19076 3 snd_seq,snd_pcm
snd 41956 14 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm,snd_timer
soundcore 7776 1 snd
snd_page_alloc 8200 3 snd_atiixp,snd_atiixp_modem,snd_pcm
cpufreq_ondemand 6440 1
powernow_k8 11040 1
freq_table 4256 1 powernow_k8
ndiswrapper 157772 0
usbcore 100484 6 usb_storage,usbhid,ohci_hcd,ehci_hcd,ndiswrapperfglrx 438412 7
agpgart 26064 2 ati_agp,fglrx
jfs 152828 2
ide_disk 13568 4
atiixp 5264 0 [permanent]
generic 4868 0 [permanent]
ide_core 102864 5 usb_storage,ide_cd,ide_disk,atiixp,generic
Some relevant facts:
Laptop, cardreader and the 2 sticks are usb2.0
I use gnome-volume-manager to automount the stick
Some notable changes from the reinstall:
gnome 2.12 to 2.14
Help please. How do I go about troubleshooting this?
Thanks.

Dynadock U10 USB charge mode not working/ charging

Hi, when in undock mode the 2 front USB ports do not charge an iPhone 4G. Its a Dynadock U10 PA3575E-1PRP. Set charge mode after undock is ticked in Dynadock Utility. iPhone charges ok when docked. As soon as the Dynadock is undocked the iPhone stops charging.
Any ideas?
Only other entry is here [http://forums.toshiba.com/t5/General-Technology/Cannot-charge-with-frontside-USB-Ports-on-Dyndock-U-with/td-p/143880] but no solution posted.
Cheers, Dan.

Akuma - Yes, other devices charge ok.
Called Toshiba support and they say this is in fact correct. The iPhone will not charge despite other devices charging ok. I asked why and they replied “that’s what 2nd line support says!” I was offered to return the item if I was not satisfied.
One of the key reasons for buying the Dynadock was to charge the iPhone overnight when the Dynadock was asleep. What a pity :-(
Curious as to the cause of this and I hope Toshiba can find a solution to the issue in the future considering there are so many iPhones out there. Toshiba has a great product in the DynaDock with the exception of this issue.
-Dan
Message was edited by: daniellynch

External USB Drive very slow to Mount

Hi, I have an iBook G4 and I recently bought an 80GB external USB 2.0 drive.
The problem I am having is that it takes a long time for the drive to mount. After I plug it into the USB port it takes 2 - 5 minutes for it to actually show up on my desktop. On occasion it doesn't even mount at all and I have to unplug and re-plug the USB drive and wait another 2- 5 minutes with my fingers crossed. Once it does mount it works just fine. I can transfer back and forth, run video off of it and run apps off of it. If I have the drive plugged in before I boot up I see the drive mounted after I log in, also just fine.
My question is how can I get rid of that initial delay? What am I doing wrong?
iBook G4 Mac OS X (10.4.6)

The problem lies with occasional dropouts that can corrupt the library's database files if they are being written to as the time of dropout. It's the nature of wireless networks. If you have a very strong signal throughout and are willing to take a chance then go for it.
But as for the speed, it must be iPhoto 11 and it's complexity causing the slowness. I had tried using a library on an EHD connected to my iMac from my laptop wirelessly with iPhoto 7 or 8 and it was pretty fast. I think it was 7 before faces and places came into being.
Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to improve wireless performance, etc.
OT

New Wireless MAC keyboard & mighty mouse very slow in retrieving information & sending

Good evening,
I just purchased these items last night from the Apple store, they are both installed on my bluetooth. I do have OS Lion.
Whenever I want to go to another site for example this site it spins and spins and takes approx 1 min which feels like 5mins.
My other wireless key board and mouse was logictech for Mac I never had a problem like this.
The only reason why I switched was because of the functionality the keyboard and mouse did not have.
Can some please help me or educate me on what I am not doing correctly.
Thanks so much,
Phyllis

I don't think you are doing anything wrong. I also don't think you communication to your computer (in this case with bluetooth) has anything to do with your computer's internet connection.
If you are having a slow internet connection then when it happens plug your old mouse and keyboard back in. Your internet connection should still be just as slow.
Maybe you should use different DNS servers as opposed to what your ISP provides. I can suggest OpenDNS (208.67.222.222, 208.67.220.220) or Google's DNS servers (8.8.8.8, 8.8.4.4).
One last thing. Since you changed a peripheral, particularly when dealing with bluetooth, I suggest you also do a smc and pram reset. In fact try this before you try changing your DNS servers.

Ejecting USB drives - very slow

Since updating to Yosemite, my brand new iMacs (work machines) are all noticeably much slower ejecting USB flash drives. Really slow. These are new, top spec iMacs with clean installs and pretty empty harddrives.
Anyone else noticing this?

I was using my girlfriends USB 128MB stick last night, with no red light showing (well, not that I noticed), then when i dragged it to the ejector/recycle bin, the red light came on constantly (I presumed to tell me that it was ready to remove). I waited 5 seconds to see if it would go out but didn't.

USB is very slow...

I've been noticing that any USB drive I plug in has some *REALLY* slow write speeds. This is both in FAT32 and when I do Mac OS Extended (Journaled).
Read speeds seem to be ok. I've tried turning Spotlight off for the drive as well as trying the 2 different USB ports to see if one was "faster," but that's not the case.
XBench shows for Sequential Write/Read:
Uncached Write 0.95 (0.59 MB/sec ([4 blocks])
Uncached Write 0.84 (0.47 MB/sec ([256 blocks])
Uncached Read 20.74 (6.07 MB/sec)
Uncached Read 59.48 (29.90 MB/sec)
As you can see, the write speeds are abnormally slow. I'm open to suggestions on what might be the cause (and how to fix). As it stands, transfers of files to my iPhone never really seem to be slow from either port...
MBP 2.66GHz i7 8GB RAM. 10.7

Could be that it is only a 1.1 hub, instead of 2.0.....?
see > USB 2.0, Hi-Speed USB FAQ
You won't be sorry using a Belkin 4 or 7 Port self-powered hub.
Belkin Hi-Speed USB 2.0 4-Port Hub F5U233-APL
Belkin Hi-Speed USB 2.0 7-Port Hub F5U237v1

3GS Fast Power Drain, USB Recharge Very Slow, Unit Stops Responding

3GS running IOS5
Mid afternoon yesterday noticed the battery was extremely low and figured it was because I hadn't charged it after it had been on the bed side table all night.
Typically it's plugged into a USB port most of the time at the home office and this was the first time it had not been charged first thing in the morning.
It never fully charged, obtaining only about 70-80% charge before the end of the day when is was removed from the USB. Woke up this morning and the phone had no charge at all. It displayed the 'plug it into an electrical source' glyph when the main button was pressed. Plugged it into the USB port it has always used and after reading the forums for a while switched it to directly into an external power source. It's now charging at a good rate.
However, when connected via USB yesterday, and directly into a wall power socket today, the phone emits a bleat similar to the sound made by a USB connection being acquired, but only a single audible sound, not the dual USB type bleats. It did this yesterday and it seemed to be coordinated with it loosing and reacquiring the USB connection which occurred several times an hour. Now I can't figure out why it's making the sound, but it's doing so about every three minutes and a half minutes, (3:23, 3:27, 3:22).
When attempting to use the phone in any way at all if fails:
- When attempting to make a call, after selecting a contact and initiating the call, it displays 'calling mobile...', but no connection is made. It never rings through and indicates any other type of response before shutting down. (When testing, the calls are received and answered but no connection was ever made. Incoming calls are not being received.)
- When reading a news feed it shuts off after a couple of minutes and when re-activated, it has forgotten where it was positioned.
- When accessing Settings and making changes, it will die, but does remember the changes made before dieing but may be ignoring the changes made. After deactivating notifications on the few that were being used. The unit indicated they had been deactivated but notifications were still being displayed.
After each of these occur, the 3GS unit just dies and displays the apple icon for a minute or so during which the phone can not be reactivated.
Have not had any major issues with the unit since I began using it.
Am aware of the current power drain problems after the IOS5 upgrade and did the upgrade on the first day it came out, but have not encountered any of the stated problems before yesterday. No software updates were authorized yesterday.

Ok, First off, this is now a concluded matter. The full restore worked and all is back to the way it was two days ago. Have no idea what might have caused the problem but after talking with a few associates, one did encounter a similar problem but it required no work to remedy.
For any reading this with a intentions of using it as a template to resolve problems, here's where I got the information: Using iPhone Recovery Mode

Sonnet USB PCIe very slow speeds

I have just noticed that hard drives connected to my Sonnet Allegro Express PCIe in slot 2 operate at about half the speed compared to one of the built in USB ports.
I know slot 2 is single lane, but I thought this was OK for USB. Is there any point in trying it in slot 4 (x8) ?
I also see that the card has a molex power connector which I have not used, but I wouldn't have thought this would affect speed.
Any other ideas?
Thanks

I have just noticed that hard drives connected to my Sonnet Allegro Express PCIe in slot 2 operate at about half the speed compared to one of the built in USB ports.
I know slot 2 is single lane, but I thought this was OK for USB. Is there any point in trying it in slot 4 (x8) ?
I also see that the card has a molex power connector which I have not used, but I wouldn't have thought this would affect speed.
Any other ideas?
Thanks

MacPro usb very slow after upgrading to mountain lion

When backing up with Carbon Copy to an external USB drive very slow, eventually the system freezes. After upgrading to Mountain Lion its been a complete pain when trying to do back-ups. Does Apple have a USB software fix for this?

Disconnect the external drive and see whether there's an improvement.

Very slow USB keyboard and mouse when performing scp copy

Hello,
As the title says, my Mac becomes very unresponsive when I copy large file via scp command. Keboard seems to read only a few letters than it "sleeps" acceptin a letter every ~2s, mouse moves "by hops" over the screen.
The scp seems to use available bandwith (~300kB/s), so seems ok. The CPU is 95% idle, so again seems OK. Disk is mostly idle.
My system configuration:
- Mac mini 5,1
- Lion
- USB keyboard + mouse (combo)
What else can I check to solve the problem? I need to use ssh/scp.
Update: Just when writing the post I got an idea to test Bluetooth keyboar+mouse. The result is that Bluetooth imput devices works without degradation, whilst at the same time the USB devices gets slow. I have tested the pendrive read/write and it is also affected by the SCP command. Any ideas why SCP over WiFi degrade USB operations? Is there any USB monitoring tool/command?
I do not want to stick with the crappy standard Bluetooth keyboard when I have a split ergonomic USB keyboard. Anyway, I was looking for a good ergonimic Bluetooth keyboard but was unsuccessful. However the exclusive, either scp either USB at a time, copy operation is also a hindrance.
Thanks in advance!

Found the root cause of the problem - dying battery in my wireless keyboard. Why it degraded in operation under such condition, with SCP running, and not otherwise is a great mystery but a few days later it started to degrade all the time.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

HT1338 My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds. Can you help me?

My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds before the screen changes. This has been happening the past 24 hours. Any ideas?

First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Using USB storage devices very slow in SL

I have two MAC's and use Entourage on both, in order to keep my Microsoft Data Base sync's I have it on a removable storage device which I move from MAc to Mac. Since updating to 10.6.1(SL) Entourage has slowed down to a snails pace and I can only assume that SL is doing something different in handling the USB external storage devices .
Very disappointing and frustrating .....Apple not a good move
Anyone else having problems
Thx
John

Yes, there are many threads about slow usb transfer or slow i/o in general e.g. (not necessary linux 3-related)
https://bbs.archlinux.org/viewtopic.php … 00#p995000
https://bbs.archlinux.org/viewtopic.php?id=110590
https://bbs.archlinux.org/viewtopic.php?id=124856
https://bbs.archlinux.org/viewtopic.php?id=112846
https://bbs.archlinux.org/viewtopic.php?id=123929
https://bbs.archlinux.org/viewtopic.php?id=124191
https://bbs.archlinux.org/viewtopic.php?id=124570 linux 3
https://bbs.archlinux.org/viewtopic.php?id=125167
https://bbs.archlinux.org/viewtopic.php?id=125826
https://bbs.archlinux.org/viewtopic.php?id=126261 exFAT
https://bbs.archlinux.org/viewtopic.php?id=120982
https://bbs.archlinux.org/viewtopic.php … 78#p994878
https://bbs.archlinux.org/viewtopic.php?id=127051
Was the issue present in kernel26 as well? What filesystem does your usb device have? How slow is the transfer?
Last edited by karol (2011-11-19 15:30:59)

Dynadock U10 - USB mouse very slow in IE

Similar Messages

Maybe you are looking for