Dynadock U3.0 -- blocking other stuff on OS X

I notice there's no widget in the Mac System Preferences panel for DynaDock U3.0.
The driver is installed, but it won't connect me to anything.
And if I try plugging my monitors into the Thunderbolt ports on my MacBook Pro, nothing happens.
There needs to be a widget in the Preferences panel to activate/deactivate it, restart it, and enable/disable individual devices on it.

Similar Messages

Since downloading ios5 on my iphone 4 the capacity guage in itunes shows other as over 21Gb and i can no longer fit any music on it. How do I get rid of the other stuff? other

Since downloading ios5 on my iphone 4 a few days ago, the capacity guage in itunes shows "other" as over 21Gb and i can no longer fit any music on my iphone.
How do I get rid of the other stuff?
capacity available on 32 Gb iphone is 28.49Gb
i previously had 21.97 Gb music, over 6 Gb photos, about 1Gb of apps, and minute amount of audio
now i have no music, 5.4 Gb photos and similar (0.8Gb) for apps and audio. i have deleted heaps of photos and unused apps to try to make space but obviosly this is a much bigger problem. I also created a smaller music folder on itunes to sync to but at present no music is selected for syncing due to the lack of available space.
i have 15Gb icloud account now also which is about half full.
Ive done a little research and heard similar tales but with much smaller other totals than this. Can you help?
i cant update my apps as i get a message saying i do not have enough available space.

I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first.

Can't print from the internet but other stuff I can

I have had my printer for about 4 months now and everything has been fine until the other day when it stopped printing from the internet. Now that I think about it, it's about the same time I put new ink in. But I can print from Word and other stuff. I even pulled up the printer in Devices and Printers and did a test page and everything was fine. I have an HP Envy 4501 (Print Scan Copy Photo). I use Chrome for my internet and like I said, I've never had a problem in the past with it.
I downloaded the HP Print and Scan Doctor and it said everything was good. When I select to have my email printed, it opens it in a new window and then it does the print display for me and I have to select 'Print using system dialog...(Ctrl+Shift+P)' and then it opens the print window. It has my printer selected, I hit print and nothing happens. My printer icon appears down by my clock in the lower right hand corner of my computer and when I hover over it, it says '(1) document pending for Missy' but then nothing happens and a few seconds later it changes to '(0) document pending for Missy'. ????
What am I doing wrong?? Help please!!!

Hi MissyDub,
Welcome to the HP Forums!
I understand that you are having a problem printing from Google Chrome, where the print job is shown, but then leaves the queue. I would be happy to assist you with this issue!
It sounds as though the issue is isolated to Google Chrome. To restore the browser settings (and printing settings) for Chrome you can uninstall and reinstall the software. If you are using a Mac, you can follow this document. If you are using a Windows computer, you can follow this document.
If that is still giving you trouble, you can also (contact Chrome Support) to find out if further assistance is necessary with their program.
Thank you for visiting the HP Forums, and I will look forward to your reply!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

On an IMAC, how do you block other users id showing up on your wifi settings?

On an IMAC,
how do you block other users id showing up on your wifi network?

Can you clarify what you mean?
If you're seeing multiple wifi networks as well as yours, that's normal. It will display any networks within range. It doesn't mean you're connected to them or that they're on your network.
Matt

TS2446 If i create a new apple id account on my ipod, will i still have all my music, apps, books and other stuff on my ipod that i downloaded and bought with my old account or will i loose everything; will i be able to still do the updates to those apps?

If I create a new apple id account on my ipod, will I still have all my music, apps, books and other stuff on my ipod that I downloaded and bought with my old account or will I loose everything; will I be able to still do the updates to those apps?
I really need help!

I don't think you understood what I wrote. You don't HAVE to pay for everything if you are happy with using the other account for updates, etc. But if you don't want to do that then you will have to buy new copies of everything for the new account. There's only one purchase item per account, but you can redownload an item in the account many times.
The idea is this:
One computer, multiple devices, one Apple ID.
One user, multiple devices, one Apple ID.
The basic idea is that each user has an Apple ID under which he/she can manage multiple devices on a single computer.
Once you step outside of that model you create such problems as not being able to use or update apps purchase under one Apple ID when using a different Apple ID. Or not being able to easily sync one device on more than one computer.

My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process:         Disk Utility [371]
Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier:      com.apple.DiskUtility
Version:         11.5.2 (298.4)
Build Info:      DiskUtility-2980400~60
Code Type:       X86-64 (Native)
Parent Process: launchd [86]
Date/Time:       2013-11-05 03:29:41.247 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          9522 sec
Crashes Since Last Report:           29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report:   25
Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6   dyld                                    0x00007fff5fc08f7c dlopen + 490
7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

IPod Nano 2G with 1Gb of "Other" stuff!?

Hi,
I gave my iPod Nano (2G) to my daughter recently. Before I did, I restored it and put a bunch of her music onto it. It needed to be charged, so I plugged it in last night only to find all the music gone. I charged it and replaced all the music files, but now I'm noticing that when I look at the Nano's summary, it gives me this info: Audio 163 songs...Other 1 Gb.
What's the "Other" stuff?? I can't find any other files on it.

Hello David,
The Other section consists of such things as files stored externally on your iPod, album artwork, games, the iPod's software, and sometimes corrupt files leftover from failed syncs of your iPod with iTunes.
1 GB is unusually large, so I would recommend restoring the iPod via iTunes to see if that helps.
B-rock

How to get rid of other stuff on my iphone

not quite sure how i did this but I have ended up with over 6.1 gb of orange "other" stuff on my iphone 3G. actually i do know what it is..it's my music that was on the phone but somehow turned to other (maybe when I moved my music folder away from my documents) now I have no music and this other stuff. I can reload my music but is there a way to remove the other stuff without resetting my phone??

Due to a failed/interrupted sync. You need to Restore in iTunes.

I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (games, Instagram),

I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.

Davin12 wrote:
I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.
Icloud or itunes backup, only backs up app data, not the app itself.
so if you restore as new, then there is no app data on your phone, you start out new...

Mail deleted a current inbox and restored an old deleted inbox. It won't restore from Time Machine, and I'm missing archived emails from the old account. I'm pretty sure there is other stuff missing, but it's hard to tell. Any ideas why it would do this?

Our Mac was working fine last Monday, then Tuesday morning one of our current inboxes was gone, and an old, archived inbox was restored--twice. Other than some trouble-shooting on Tuesday, we've pretty much left things alone as we were busy doing other stuff.
I tried restoring the files from Time Machine, but it didn't work. I followed plisk restore instructions--nothing. It's a mess. We have no idea what would have caused this. We're above average users--we weren't mucking about with anything. It was just so strange.
I went back into Time Machine, and it just makes no sense that I can't restore anything. We're now missing important emails--nothing too tragic, but still a pain in the butt. Thankfully the current inbox that was somehow deleted had a back-up on our email server, but the archived/deleted inbox file that was magically restored had all the archived emails that we kept deleted.
Any ideas would be wonderful.
Thanks!

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

Whenever I turn my MacBook pro on, all the other stuff is loaded (MS word/excel/powerpoint), Spotify, iCal, etc are automatically loaded, so in order for me to go to my desired website, I have to close (x) out all applications loaded. Please advise.

If you are using Lion:
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

I cant create account because i dont have credit card but I have ipod touch and I need it to download free games and other stuff

I cant create account because i dont have credit card but I have ipod touch and I need it to download free games and other stuff.Is there any option i can write i dont have any credit card?
Sorry abaot my english

Hi...
Click None in the Payment Information window.
Instructions for either using your iPhone or a computer > Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

When I try to sync my ipod it shows that i have 2 gigs of other stuff. I dont know what it is and it is taking up space. how do I get it off?

When I try to sync my ipod it shows that I have 2 gig of "other" stuff and I don't know what it is and it is taking up space. How do I get it off?

You need to restore you iPod to gedure the "other" to its normal of less than 0.5 GB. A restore from backup works if the large other is not in the backup. Make sure that you turn off outo syncing (iTunes>Preferences>Device and check the box that says Prevent iPOds....syncing. Otherwise, the backup will contain the other.

Massive Query blocking other Processes

Hi
We are having a Sharepoint 2010 server and we have deployed a dot net custom application on it. Recently the application was working slow and the same was observed on out of box created lists using the out of box UI.
We found that it was originating from a SQL query which was blocking other processes.
Now this problem, occurs intermittently and goes away on its own in some time(~10 minutes). The query responsible is :
SELECT TOP(@NUMROWS) t1.[Type] AS c0, UserData.[ntext2], UserData.[datetime1], UserData.[nvarchar10], t6.[nvarchar5] AS c14c15, UserData.[float2], UserData.[int8], UserData.[tp_ItemOrder], UserData.[nvarchar1], t15.[nvarchar6] AS c36c34, UserData.[ntext1], UserData.[int7], UserData.[float1], UserData.[nvarchar19], UserData.[tp_ID], UserData.[nvarchar5], t5.[nvarchar4] AS c12c13, UserData.[bit1], t11.[nvarchar3] AS c24c25, UserData.[int11], t14.[nvarchar6] AS c30c34, t15.[tp_ID] AS c36c32, UserData.[tp_GUID], t1.[ProgId] AS c42, t1.[SortBehavior] AS c1, UserData.[tp_Author], UserData.[tp_Editor], UserData.[int1], UserData.[int6], UserData.[nvarchar13], UserData.[ntext5], UserData.[datetime4], UserData.[nvarchar18], UserData.[tp_ContentTypeId], t8.[nvarchar3] AS c18c19, UserData.[int10], t15.[tp_Created] AS c36c35, UserData.[tp_WorkflowVersion], t1.[LeafName] AS c37, UserData.[tp_Version], t1.[Id] AS c4, UserData.[nvarchar4], UserData.[nvarchar9], t14.[tp_ID] AS c30c32, t1.[TimeLastModified] AS c40, UserData.[tp_IsCurrentVersion], UserData.[tp_HasCopyDestinations], UserData.[tp_Level], t4.[nvarchar3] AS c10c11, UserData.[int5], t10.[nvarchar3] AS c22c23, UserData.[nvarchar12], UserData.[ntext4], UserData.[datetime3], UserData.[nvarchar17], t2.[nvarchar3] AS c6c7, UserData.[nvarchar20], UserData.[datetime8], UserData.[tp_HasAttachment], UserData.[tp_Modified], CASE WHEN DATALENGTH(t1.DirName) = 0 THEN t1.LeafName WHEN DATALENGTH(t1.LeafName) = 0 THEN t1.DirName ELSE t1.DirName + N'/' + t1.LeafName END AS c2, UserData.[nvarchar3], UserData.[nvarchar8], t7.[nvarchar3] AS c16c17, t13.[Status1] AS c28c29, t14.[tp_Created] AS c30c35, t15.[nvarchar4] AS c36c33, UserData.[tp_UIVersion], t1.[ItemChildCount] AS c43, UserData.[tp_CopySource], UserData.[nvarchar11], UserData.[ntext3], UserData.[datetime2], UserData.[nvarchar16], UserData.[tp_InstanceID], t3.[nvarchar3] AS c8c9, UserData.[int4], t9.[nvarchar3] AS c20c21, UserData.[int9], UserData.[float3], UserData.[datetime7], UserData.[tp_UIVersionString], t1.[TimeCreated] AS c38, t1.[ScopeId] AS c5, UserData.[nvarchar2], UserData.[nvarchar7], t14.[nvarchar4] AS c30c33, t15.[nvarchar1] AS c36c31, t1.[ClientId] AS c41, UserData.[int3], t12.[nvarchar3] AS c26c27, UserData.[datetime6], UserData.[tp_Created], UserData.[tp_ModerationStatus], UserData.[nvarchar6], UserData.[tp_WorkflowInstanceID], t1.[FolderChildCount] AS c44, t1.[MetaInfo] AS c3, UserData.[nvarchar14], t14.[nvarchar1] AS c30c31, UserData.[int2], UserData.[datetime5], t1.[DirName] AS c39 FROM AllUserData AS UserData WITH(INDEX=AllUserData_PK) INNER JOIN Docs AS t1 WITH(NOLOCK) ON (UserData.[tp_RowOrdinal] = 0) AND (t1.SiteId=UserData.tp_SiteId) AND (t1.SiteId = @SITEID) AND (t1.ParentId = UserData.tp_ParentId) AND (t1.Id = UserData.tp_DocId) AND ( (UserData.tp_Level = 1) ) AND (t1.Level = UserData.tp_Level) AND (t1.IsCurrentVersion = 1) AND (t1.Level = 1 OR t1.Level = 2) AND (UserData.[tp_ListID] =@LISTID) AND (UserData.[tp_CalculatedVersion] = 0 ) AND (UserData.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (UserData.[tp_DeleteTransactionId] = 0x ) LEFT OUTER LOOP JOIN AllUserData AS t2 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int1]=t2.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t2.[tp_RowOrdinal] = 0) AND ( (t2.tp_Level = 1) ) AND (t2.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t2.[tp_CalculatedVersion] = 0 ) AND (t2.[tp_DeleteTransactionId] = 0x ) AND (t2.tp_ListId = @L2) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t3 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int2]=t3.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t3.[tp_RowOrdinal] = 0) AND ( (t3.tp_Level = 1) ) AND (t3.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t3.[tp_CalculatedVersion] = 0 ) AND (t3.[tp_DeleteTransactionId] = 0x ) AND (t3.tp_ListId = @L4) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t4 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int3]=t4.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t4.[tp_RowOrdinal] = 0) AND ( (t4.tp_Level = 1) ) AND (t4.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t4.[tp_CalculatedVersion] = 0 ) AND (t4.[tp_DeleteTransactionId] = 0x ) AND (t4.tp_ListId = @L5) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t5 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int4]=t5.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t5.[tp_RowOrdinal] = 0) AND ( (t5.tp_Level = 1) ) AND (t5.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t5.[tp_CalculatedVersion] = 0 ) AND (t5.[tp_DeleteTransactionId] = 0x ) AND (t5.tp_ListId = @L5) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t6 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int5]=t6.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t6.[tp_RowOrdinal] = 0) AND ( (t6.tp_Level = 1) ) AND (t6.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t6.[tp_CalculatedVersion] = 0 ) AND (t6.[tp_DeleteTransactionId] = 0x ) AND (t6.tp_ListId = @L6) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t7 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int6]=t7.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t7.[tp_RowOrdinal] = 0) AND ( (t7.tp_Level = 1) ) AND (t7.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t7.[tp_CalculatedVersion] = 0 ) AND (t7.[tp_DeleteTransactionId] = 0x ) AND (t7.tp_ListId = @L7) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t8 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int7]=t8.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t8.[tp_RowOrdinal] = 0) AND ( (t8.tp_Level = 1) ) AND (t8.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t8.[tp_CalculatedVersion] = 0 ) AND (t8.[tp_DeleteTransactionId] = 0x ) AND (t8.tp_ListId = @L8) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t9 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int8]=t9.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t9.[tp_RowOrdinal] = 0) AND ( (t9.tp_Level = 1) ) AND (t9.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t9.[tp_CalculatedVersion] = 0 ) AND (t9.[tp_DeleteTransactionId] = 0x ) AND (t9.tp_ListId = @L9) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t10 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int9]=t10.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t10.[tp_RowOrdinal] = 0) AND ( (t10.tp_Level = 1) ) AND (t10.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t10.[tp_CalculatedVersion] = 0 ) AND (t10.[tp_DeleteTransactionId] = 0x ) AND (t10.tp_ListId = @L10) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t11 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int10]=t11.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t11.[tp_RowOrdinal] = 0) AND ( (t11.tp_Level = 1) ) AND (t11.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t11.[tp_CalculatedVersion] = 0 ) AND (t11.[tp_DeleteTransactionId] = 0x ) AND (t11.tp_ListId = @L11) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t12 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[int11]=t12.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t12.[tp_RowOrdinal] = 0) AND ( (t12.tp_Level = 1) ) AND (t12.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t12.[tp_CalculatedVersion] = 0 ) AND (t12.[tp_DeleteTransactionId] = 0x ) AND (t12.tp_ListId = @L12) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN Workflow AS t13 WITH(NOLOCK) ON ( CAST ( CAST (UserData.[nvarchar18]AS VARBINARY) AS UNIQUEIDENTIFIER)=t13.[ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t13.SiteId = @SITEID) AND (t13.WebId = @WEBID) AND (t13.ListId = UserData.tp_ListId) AND (t13.ItemId = UserData.tp_Id) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t14 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[tp_Author]=t14.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t14.[tp_RowOrdinal] = 0) AND ( (t14.tp_Level = 1) ) AND (t14.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t14.[tp_CalculatedVersion] = 0 ) AND (t14.[tp_DeleteTransactionId] = 0x ) AND (t14.tp_ListId = @L14) AND (UserData.tp_ListId = @L3) LEFT OUTER LOOP JOIN AllUserData AS t15 WITH(NOLOCK,INDEX=AllUserData_PK) ON (UserData.[tp_Editor]=t15.[tp_ID]) AND (UserData.[tp_RowOrdinal] = 0) AND (t15.[tp_RowOrdinal] = 0) AND ( (t15.tp_Level = 1) ) AND (t15.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (t15.[tp_CalculatedVersion] = 0 ) AND (t15.[tp_DeleteTransactionId] = 0x ) AND (t15.tp_ListId = @L14) AND (UserData.tp_ListId = @L3) WHERE (UserData.[tp_CalculatedVersion] = 0 ) AND (UserData.[tp_IsCurrentVersion] = CONVERT(bit,1) ) AND (UserData.[tp_DeleteTransactionId] = 0x ) AND (UserData.tp_ListID=@LISTID) AND ( (UserData.tp_Level = 1) ) AND (UserData.tp_SiteId=@SITEID) AND (UserData.tp_RowOrdinal=0) AND (t1.SiteId=@SITEID AND (t1.DirName=@DN OR t1.DirName LIKE @DNEL+N'/%') AND t1.SortBehavior=0) ORDER BY UserData.[tp_ID] ASC OPTION (FORCE ORDER, MAXDOP 1
Any ideas what is causing this? Any background process or the custom code.
Thanks
Akshay

This looks like a standard List query (could be any list).
Make sure your List View Threshold is 5000 or less (this is set on the Web Application, primarily). Lists that are queried for >5000 rows will introduce a table locking read.
Make sure your SQL Server is set to a Max Degree of Parallelism of 1, as well.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

All of a sudden, new tabs have started opening up (in Firefox) advertising games and other stuff. Any idea's of what is going on here?

All of a sudden, new tabs have started opening up (in Firefox) advertising games and other stuff. Any idea's of what is going on here?

Try scanning for malware using the removal tools listed near the bottom of the [[Troubleshoot Firefox issues caused by malware]] article.
It might also help if you could copy and paste troubleshooting information into your reply. See [[Use the Troubleshooting Information page to help fix Firefox issues]] for details.

Dynadock U3.0 -- blocking other stuff on OS X

Similar Messages

Maybe you are looking for